Overview
1-1 Overview
|
Category |
Model |
Maximum I/O Points |
Total Program Memory |
Built-in Ethernet Communication |
HSC |
HSPO |
Total Axes |
Pulse |
EtherCAT |
|||||
|
DIO |
AIO |
PLC |
Motion |
Number of axis |
Number of axis |
3D circular/ helical interpolation |
E-CAM |
|||||||
|
Compact CPU |
EtherCAT Motion Control : SAPC(Single axis positioning control) Pulse Positioning Control : SAPC、Linear/Circular Interpolation*5、ICF/ICA*2 Built-in I/O: Input 16 / Output 16、Optional analog output function (PWMDA) Communication Ports: Ethernet or EtherCAT(Eth/EC)、2 ports RS485、USB Type-C、FHB expansion bus、Micro-SD slot*6、Run/Stop switch Supports local I/O and Plug-in expansion modules |
MQ2M0-1616◇ |
512 |
128 |
80 KB |
— |
Master/Slave |
— |
— |
— |
— |
— |
— |
— |
|
MQ2M1-1616◇ |
512 |
128 |
80 KB |
— |
Master/Slave |
4Points*3 (2ch) |
4Points*3 (2axes) |
2 axes |
2 axes*3 |
— |
— |
— |
||
|
MQ2M3-1616◇ |
512 |
128 |
80 KB |
— |
Master/Slave |
8Points*3 (4ch) |
8Points*3 (4axes) |
4 axes |
4 axes*3 |
— |
— |
— |
||
|
MQ2M6-1616◇ |
512 |
128 |
80KB |
— |
Master/Slave |
8Points*3 (4ch) |
8Points*3 (4axes) |
20 axes |
4 axes*3 |
16 axes (SAPC*1) |
— |
— |
||
|
Advanced CPU |
EtherCAT Motion Control : SAPC(Single axis positioning control) Pulse Positioning Control : SAPC、Linear/Circular Interpolation*5、ICF/ICA*2 Built-in I/O: Input 16 / Output 16、Optional analog output function (PWMDA) Communication Ports: Ethernet or EtherCAT(Eth/EC)、2 ports RS485、USB Type-C、FHB expansion bus、Micro-SD slot*6、Run/Stop switch Supports local I/O, high-speed, and advanced expansion modules |
MA1N0-1616◇ |
1024 |
128 |
80 KB |
— |
Master/Slave |
— |
— |
— |
— |
— |
— |
— |
|
MA1N3-1616◇ |
1024 |
128 |
80 KB |
— |
Master/Slave |
8Points (4ch) |
8Points (4axes) |
12 axes |
4 axes |
8 axes (SAPC*1) |
— |
— |
||
|
MA1I4-1616◇ |
2048 |
256 |
80 KB |
— |
Master/Slave |
8Points (4ch) |
16Points (8axes) |
24 axes |
8 axes |
16 axes (SAPC*1) |
— |
— |
||
|
General Motion CPU |
EtherCAT Motion Control : SAPC(Single axis positioning control)、Linear/Circular Interpolation、E-CAM、ICF/ICA*2 Pulse Positioning Control : SAPC、Linear/Circular Interpolation、ICF/ICA*2 Built-in I/O: Input 16 / Output 16、12-bit 2ch analog input、Optional analog output function (PWMDA) Communication Ports: EtherCAT、Ethernet、2 ports RS485、USB Type-C、FHB expansion bus、Micro-SD slot*6、Run/Stop switch Supports local I/O, high-speed*7, and advanced expansion modules*7 |
MS2C4-1616◇ |
512 |
128 |
80 KB |
1.5 MB |
Master/Slave |
4Points*3 (2ch) |
4Points (2axes) |
10 axes |
2 axes |
8 Real/Virtual |
— |
— |
|
MS2C6-1616◇ |
512 |
128 |
80 KB |
1.5 MB |
Master/Slave |
4Points*3 (2ch) |
4Points (2axes) |
18 axes |
2 axes |
16Real/Virtual |
— |
— |
||
|
MU3C2-1616◇ |
512 |
128 |
80 KB |
1.5 MB |
Master/Slave |
4Points*3 (2ch) |
4Points (2axes) |
7 axes |
2 axes |
4Real/Virtual + 1 Virtual |
— |
2 axes |
||
|
MU3C3-1616◇ |
512 |
128 |
80 KB |
1.5 MB |
Master/Slave |
4Points*3 (2ch) |
4Points (2axes) |
9 axes |
2 axes |
6Real/Virtual + 1 Virtual |
— |
3 axes |
||
|
MU3C4-1616◇ |
512 |
128 |
80 KB |
1.5 MB |
Master/Slave |
4Points*3 (2ch) |
4Points (2axes) |
9 axes |
2 axes |
6Real/Virtual + 1 Virtual |
— |
4 axes |
||
|
MU3C5-1616◇ |
512 |
128 |
80 KB |
1.5 MB |
Master/Slave |
6 Points *3 (3ch) |
8 Points (4 axes ) |
17 axes |
4 axes |
12 Real/Virtual + 1 Virtual |
— |
4 axes |
||
|
MU3C6-1616◇ |
512 |
128 |
80 KB |
1.5 MB |
Master/Slave |
6 Points *3 (3ch) |
8 Points (4 axes ) |
20 axes |
4 axes |
16 Real/Virtua |
— |
6 axes |
||
|
MS2C4-1616◇ |
1024 |
128 |
80 KB |
1.1 MB |
Master/Slave |
16Points*3 (8ch) |
16Points (8axes) |
18 axes |
8 axes |
8 Real/Virtual + 2 Virtual |
— |
2 axes |
||
|
MS2C5-1616◇ |
2048 |
256 |
80 KB |
1.5 MB |
Master/Slave |
16Points*3 (8ch) |
16Points (8axes) |
22 axes |
8 axes |
12Real/Virtual + 2 Virtual |
— |
3 axes |
||
|
MS3C6-1616◇ |
2048 |
256 |
80 KB |
3 MB |
Master/Slave |
16Points*3 (8ch) |
16Points (8axes) |
24 axes |
8 axes |
16 Real/Virtual |
— |
3 axes |
||
|
Advanced Motion CPU |
EtherCAT Motion Control : SAPC(Single axis positioning control) Linear/Circular/3D Circular/Helical interpolation、E-CAM、ICF/ICA*2 Pulse Positioning Control : SAPC、Linear/Circular Interpolation、ICF/ICA*2 Built-in I/O: Input 16 / Output 16、12-bit 2ch analog input、Optional analog output function (PWMDA) Communication Ports: EtherCAT、Ethernet、2 ports RS485、USB Type-C、FHB expansion bus、Micro-SD slot*6、Run/Stop switch Supports local I/O, high-speed, and advanced expansion modules |
ME2C3-1616◇ |
1024 |
128 |
80 KB |
742 KB |
Master/Slave |
16Points*3 (8ch) |
16Points (8axes) |
13 axes |
8 axes |
4 Real/Virtual + 1 Virtual |
● |
4 axes |
|
ME2C4-1616◇ |
1024 |
128 |
80 KB |
1.1 MB |
Master/Slave |
16Points*3 (8ch) |
16Points (8axes) |
18 axes |
8 axes |
8 Real/Virtual + 2 Virtual |
● |
8 axes |
||
|
ME2C5-1616◇ |
2048 |
256 |
80 KB |
1.5 MB |
Master/Slave |
16Points*3 (8ch) |
16Points (8axes) |
22 axes |
8 axes |
12 Real/Virtual + 2 Virtual |
● |
12 axes |
||
|
ME3C6-1616◇ |
2048 |
256 |
80 KB |
3 MB |
Master/Slave |
16Points*3 (8ch) |
16Points (8axes) |
24 axes |
8 axes |
16 Real/Virtual |
● |
16 axes |
||
This chapter provide an overview of the model types in the M series PLC modules.
Simple description of M series PLC model series
◇: T — Transistor SINK(NPN) output; J — Transistor SOURCE (PNP) output
* 1 : SAPC (Single Axis Positioning Control)
* 2 : ICF (interrupt constant feed), ICA(interrupt constant angle) ;MU2C4-1616 ◇ MU2C6-1616 ◇, does not support EtherCAT control ICF/ICA
* 3 : MQ can Additional expansion 8 points (4 axes /4 channels) via Plug-in,For ME/MS/MU models half of the counting interrupts are allocated for Motion control use.
* 4 : Built-in CPU support for MQTT and iMonitor; iAccess will be supported through expansion modules (expected in 2026) / iMonitor and iAccess services require activation via key
* 5 : Specific models supported;MQ2M0-1616,◇MQ2M1-1616,◇MQ2M3-1616◇,MA1N0-1616◇,
MA1N3-1616◇, do not support Circular Interpolation.
* 6 : SD card data collection function (expected support in 2026)
* 7 : MU CPU Not Supported high-speed, and advanced expansion modules
|
Category |
Model |
Specifications |
|
|
Local I/O Expansion |
Digital I/O Module |
M16X |
16 points 24 VDC digital input,Push-in terminal blocks |
|
M16YT |
16 points transistor SINK(NPN) output ,Push-in terminal blocks |
||
|
M16YJ |
16 points transistor SOURCE(PNP) output ,Push-in terminal blocks |
||
|
M16YR |
16 points relay output ,Push-in terminal blocks |
||
|
M1616XYT |
16 points 24 VDC digital input,16 points transistor SINK(NPN) output, 40 pins header connector |
||
|
M1616XYJ |
16 points 24 VDC digital input,16 points transistor SOURCE(PNP) output, 40 pins header connector |
||
|
M1616XYR |
16 points 24 VDC digital input,16 points relay output,40 pins header connector |
||
|
Analog I/O Module |
M04ADR |
4 channels,Voltage and current input,Resolution:1/160000 |
|
|
M04ADS |
4 channels,Voltage and current input,Resolution:1/65535 |
||
|
M08ADS |
8 channels,14-bit analog input module. (-10V~0V~+10V or -20mA~0mA~+20mA…) ,Resolution:1/65535 |
||
|
M04AD |
4 channels,Voltage and current input,Resolution:1/16383 |
||
|
M04DAR |
4 channels,Voltage and current output,Resolution:1/54000 |
||
|
M04DA |
4 channels,Voltage and current output,Resolution:1/16383 |
||
|
M0202AH |
2 channels voltage and current input + 2 channels voltage and current output ,Resolution:1/16383 |
||
|
Temperature Input Module |
M04TCR |
4 channels,Thermocouple temperature input (K, J, T, E, R, B, N, S, mV), Precision: ±0.2%(25°C±5°C) |
|
|
M04TC |
4 channels,Thermocouple temperature input (K, J, T, E, R, B, N, S, mV), Precision: ±0.5%(25°C±5°C) |
||
|
M04RTD |
4 channels,RTD(Pt100/Pt1000, JPt100/JPt1000),Precision: ±0.1%(25° C±5° C) |
||
|
M0202TH |
2 channels RTD+ 2 channels thermocouple,Precision: RTD: ±0.1%,TC:±0.5%(25° C±5° C) |
||
|
Load Cell Module |
M02LCR |
2 channels load cell input module,A/D Converter Utilized: 24 bits,Precision: ±0.01%(25° C±5° C) |
|
|
M02LC |
2 channels load cell input module,A/D Converter Utilized: 24 bits, Precision: ±0.5%(25° C±5° C) |
||
|
High-speed*1 |
Communication Module |
MHCM25 |
1 port RS232 + 1 port RS485 high speed*1 serial communication |
|
MHCM22 |
2 port RS232 high speed*1 serial communication |
||
|
MHCM55 |
2 ports RS485 high speed*1 serial communication |
||
|
I/O Bus Extension |
Repeater Module |
MRPWE-AC |
Including the original 16 local I/O expansion modules directly supported by the CPU with maximum of 3 repeaters added per CPU, achieving up to 64 local I/O expansion modules. Input: 100~240VAC (50/60Hz),Output: 24VDC 2A(Internal and external ),48W |
|
I/O Bus Extension Module (Head) |
MRGH |
The head module must be used with the MRGT (tail). Each row can expand up to 16 Local I/O expansion modules, with a maximum of 6 rows (6 sections,racks), for a total of 64 Local I/O expansion modules. |
|
|
I/O Bus Extension Module (Tail) |
MRGT |
The tail module must be used with the MRGH (head). Each row can expand up to 16 Local I/O expansion modules, with a maximum of 6 rows (6 sections,racks), for a total of 64 Local I/O expansion modules. |
|
|
Power Expansion |
Power Supply Module |
MPA024-24 |
Input: 100~240VAC (50/60Hz),Output: 24VDC 1A(Internal and external ),24W |
|
MPA048-24 |
Input: 100~240VAC (50/60Hz),Output: 24VDC 2A(Internal and external ),48W |
||
|
Plug-in*3 Expansion Module |
Digital I/O Plug-in |
MB-4X |
4 points 24 VDC digital input,Push-in terminal block |
|
MB-2HSC |
24 VDC digital input,2 channels 200KHz HSC,Push-in terminal blocks |
||
|
MB-4YT |
4 points transistor SINK(NPN) output ,Push-in terminal blocks |
||
|
MB-4YJ |
4 points transistor SOURCE(PNP) output,Push-in terminal blocks |
||
|
MB-2PSOT |
transistor SINK(NPN) output,2 channels 200KHz HSPO,Push-in terminal blocks |
||
|
MB-2PSOJ |
transistor SOURCE(PNP) output,2 channels 200KHz HSPO,Push-in terminal blocks |
||
|
Analog I/O Plug-in |
MB-2ADL |
2 channels,12-bit analog input module. Resolution:1/4096 |
|
|
MB-2DAL |
2 channels,12-bit analog output module. Resolution:1/4096 |
||
|
Communication Plug-in |
MB-CB2 |
1 port RS232 Communication |
|
|
MB-CB5 |
1 port RS485 Communication |
||
|
RTC Plug-in |
MB-RTC |
RTC Clock Extension |
|
|
Peripheral and Accessory |
Coupler Unit |
MC0EN |
Remote I/O Coupler (Modbus TCP and Ethernet/IP) |
|
Dedicated Memory Card |
MFM06 |
Industrial grade Micro-SD card,Data-log area: 6GB*2 |
|
|
End module |
MRE |
End module must be connected to the right side of the CPU module or the end of the entire row(rack) (Included within the CPU and I/O bus extension module) |
|
|
Terminal block |
MFT40T |
40 pins interface module,Connection method: PID(for engineering testing purpose, not necessary) |
|
|
High density DI/DO connection cable |
MFW40I-50 |
High density modules connector 40pin socket, Vertical cable exit, shielded 28AWG I/O cable length 50cm Usually used with MFT40T |
|
|
MFW40N-150 |
High density modules connector 40pin socket (discrete wire at one end) , Horizontal cable exit, shielded 28AWG I/O cable length 150cm |
||
|
MFW40NS-300 |
High density modules connector 40pin socket (discrete wire at one end) , Vertical cable exit, 22AWG I/O cable length 300cm |
||
|
I/O Bus extension module connection cable |
MFB20M-120 |
Connection between I/O bus extension modules MRGT and MRGH with a 20-pin MDR connector, cable length 120 cm |
|
Brief Description of M Series Expansion Modules
*1 ME/MS/MA CPUs support high-speed expansion modules, MU/MQ CPUs and IO Couplers do not. A single CPU can support up to 6 high-speed expansion modules, which must be installed in the first 6 expansion slots on the right side of the CPU (between the CPU and local I/O expansion).
*2 The M series PLC only supports the MFM06 dedicated memory card
*3 MQ CPUs support Plug-in expansion modules, while ME/MS/MA CPUs do not.
1-2 Manuals Used
The table below lists the relevant manuals for M series PLC products.
|
Name |
Code |
Description |
|
M_PLC_CPU_Unit_User_Manual |
01 |
Describing the CPU hardware configuration specifications, the introduction of interface function, the introduction of quick steps for wire installation, troubleshooting and maintenance inspection, etc. |
|
M_PLC_Expansion_Module_Specification_Manual |
02 |
Describing the hardware configuration, function introduction, operating method and troubleshooting, etc. of the expansion module. |
|
M_PLC_Motion_User_Manual |
06 |
Describing the application of EtherCAT communication commands. |
|
M_PLC_Software_User_Manual |
04 |
Introducing the UperLogic Software related interface, operation and functions. |
|
M_PLC_Instruction_User_Manual |
07 |
Introducing the basic commands and functions designed for the MPLC. |
|
M_PLC_Function_and_Application_User_Manual |
03 |
Introducing the advanced commands and functions designed for the MPLC. |
|
M_PLC_Structured_Language_ST_Manual |
05 |
Introducing the ST related interface, operation and functions. |
|
M_PLC_Function_Function_Block_User_Manual |
09 |
Introducing the FCM related interface, operation and functions. |
|
M-Series and FBs-Series PLC Comparison Manual |
10 |
Compare M series and FBs series. |
FATEK Manual Table
Tip: press ← → to switch chapters, Ctrl+K to search