{"id":3255,"date":"2026-11-17T18:39:41","date_gmt":"2026-11-17T10:39:41","guid":{"rendered":"https:\/\/resource.fatek.com\/index.php\/2026\/11\/17\/mplc-m06-en-09\/"},"modified":"2026-11-17T18:39:41","modified_gmt":"2026-11-17T10:39:41","slug":"mplc-m06-en-09","status":"publish","type":"post","link":"https:\/\/resource.fatek.com\/index.php\/2026\/11\/17\/mplc-m06-en-09\/","title":{"rendered":"Chapter 9 Motion Parameter Mapping Table"},"content":{"rendered":"<p><strong>Motion Parameter Mapping Table<\/strong><\/p>\n<h3>9-1 Introduction of Motion Parameter Mapping Table<\/h3>\n<p>The motion parameter mapping table allows users to dynamically modify motion control related parameters in the PLC Ladder program. Users can dynamically modify related motion parameters in the PLC Ladder program by specifying registers and corresponding to the parameter items to be modified through MFMapTbPrm. At present, the sports parameters are not open to all sports parameters for dynamic modification in the user Ladder. Currently, the modifiable motion parameters are provided in the following table: <\/p>\n<div class=\"fatek-tw\">\n<table>\n<thead>\n<tr>\n<th>\n<p><strong>Motion Parameter Group<\/strong><\/p>\n<\/th>\n<th>\n<p><strong>Dynamically Modifiable Item<\/strong><\/p>\n<\/th>\n<th>\n<p><strong>Modified Item Position<\/strong><\/p>\n<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>\n<p>Point Table<\/p>\n<\/td>\n<td>\n<p>Mode<\/p>\n<p>Acceleration Curve Type<\/p>\n<p>Position (Master Axis)<\/p>\n<p>Position (Slave Axis 1)<\/p>\n<p>Position (Slave Axis 2)<\/p>\n<p>Position (Slave Axis 3)<\/p>\n<p>Speed<\/p>\n<p>Acceleration<\/p>\n<p>Deceleration<\/p>\n<p>S Acceleration Ratio<\/p>\n<p>S Deceleration Ratio<\/p>\n<p>Arc Mode<\/p>\n<p>Arc Direction<\/p>\n<p>Arc Point X<\/p>\n<p>Arc Point Y<\/p>\n<p>Arc Point Radius<\/p>\n<p>Auxiliary Radius<\/p>\n<p>Standby Time<\/p>\n<p>Next Point No.<\/p>\n<p>Arc Rounds<\/p>\n<p>Continue Mode<\/p>\n<p>Arc Point Z<\/p>\n<p>Synthesis Rate<\/p>\n<\/td>\n<td>\n<p>Motion Parameter \u2192 Motion Point Setting<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Axis Table<\/p>\n<\/td>\n<td>\n<p>Initial Speed<\/p>\n<p>Max. Motor Speed<\/p>\n<p>Default Acceleration<\/p>\n<p>Default Deceleration<\/p>\n<p>Soft Limit (+)<\/p>\n<p>Soft Limit (-)<\/p>\n<p>Following Error Window<\/p>\n<p>Following Error Timeout<\/p>\n<p>Positioning Completion Tolerance<\/p>\n<p>Positioning Completion Check Time<\/p>\n<p>Max. Motor Torque<\/p>\n<p>Max. Torque Limit (+)<\/p>\n<p>Max. Torque Limit (-)<\/p>\n<p>HOME Mode<\/p>\n<p>HOME Return Direction<\/p>\n<p>HOME Return Offset<\/p>\n<p>HOME Return Searching Speed<\/p>\n<p>HOME Return Crawling Speed<\/p>\n<p>JOG Initial Speed<\/p>\n<p>JOG Speed<\/p>\n<p>JOG Acceleration<\/p>\n<p>JOG Deceleration<\/p>\n<p>JOG Distance<\/p>\n<\/td>\n<td>\n<p>Motion Control \u2192 Motion Axis Setting<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Synchronous Table<\/p>\n<\/td>\n<td>\n<p>Clutch OFF sliding time at deceleration time<\/p>\n<p>Master Axis Phase Compensation: Compensation Instruction Amount<\/p>\n<p>Master Axis Phase Compensation: Compensation Change Mode<\/p>\n<p>Master Axis Phase Compensation: Compensation Change Time<\/p>\n<p>Auxiliary Axis Phase Compensation: Compensation Command Amount<\/p>\n<p>Auxiliary Axis Phase Compensation: Compensation Change Mode<\/p>\n<p>Auxiliary Axis Phase Compensation: Compensation Change Time<\/p>\n<p>Variable Gear Ratio Numerator<\/p>\n<p>Variable Gear Ratio Denominator<\/p>\n<p>Variable Gear Ratio Change Mode<\/p>\n<p>Variable Gear Ratio Change Time<\/p>\n<p>Clutch ON Setting Value<\/p>\n<p>Clutch ON Delay<\/p>\n<p>Main Clutch: Clutch ON Offset<\/p>\n<p>Main Clutch: Clutch ON Offset Time<\/p>\n<p>Main Clutch: Clutch ON Following Time<\/p>\n<p>Main Clutch: Clutch ON Following Offset<\/p>\n<p>Main clutch: Clutch OFF Setting Value<\/p>\n<p>Main Clutch: Clutch OFF Delay<\/p>\n<p>Main Clutch: Clutch OFF Offset<\/p>\n<p>Main Clutch: Clutch OFF Offset Time<\/p>\n<p>Auxiliary Clutch: Clutch ON Setting Value <\/p>\n<p>Auxiliary clutch: Clutch OFF delay<\/p>\n<p>Auxiliary Clutch: Clutch OFF Offset<\/p>\n<p>Auxiliary Clutch: Clutch OFF Offset Time<\/p>\n<p>Reserve 1 (Do not use)<\/p>\n<p>Reserve 2 (Do not use)<\/p>\n<p>Step Angle Compensation: Reference Speed<\/p>\n<p>Step angle compensation: reference amount<\/p>\n<p>Step Angle Compensation: Compensation Value Change Method<\/p>\n<p>Step Angle Compensation: Compensation Value Change Time<\/p>\n<p>Cam Profile No.<\/p>\n<p>Synchronization Contact No.<\/p>\n<p>Output Filter Time Constant<\/p>\n<p>Cam Input Cycle<\/p>\n<p>Synchronous Master Axis Phase Default Value<\/p>\n<p>Master Axis Phase Default Value after Phase Compensation<\/p>\n<p>Main Clutch Input Phase Default Value<\/p>\n<p>Auxiliary Clutch Input Phase Default Value<\/p>\n<p>Main Clutch Output Axis Phase Default Value<\/p>\n<p>Auxiliary Clutch Output Axis Phase Default Value<\/p>\n<p>Torque Limiting Clutch Input Axis Phase Default Value<\/p>\n<p>Cam Input Axis Phase Default Value<\/p>\n<p>Cam Output Axis Reference Coordinates<\/p>\n<p>Cam Travel<\/p>\n<\/td>\n<td>\n<p>Motion Control \u2192 Motion Synchronizing Setting \u2192 Synchronizing Parameters<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Axis Speed<\/p>\n<\/td>\n<td>\n<p>Speed<\/p>\n<p>Max. Torque<\/p>\n<\/td>\n<td>\n<p>The speed and torque limit of the current control mode of the axis in \u201cSpeed Mode\u201d<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Axis Torque<\/p>\n<\/td>\n<td>\n<p>Torque<\/p>\n<p>Max. Speed<\/p>\n<\/td>\n<td>\n<p>The speed and torque limit of the current control mode of the axis in \u201cTorque Mode\u201d<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Synchronous Contacts<\/p>\n<\/td>\n<td>\n<p>Output Position<\/p>\n<p>ON  Setting Value<\/p>\n<p>OFF Setting Value<\/p>\n<\/td>\n<td>\n<p>Motion Control \u2192 Motion Synchronizing Setting \u2192 Synchronizing Contacts<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Internal Motion Variables<\/p>\n<\/td>\n<td>\n<p>MW<\/p>\n<\/td>\n<td>\n<p>Motion Control \u2192 Motion Flow, Dedicated internal register within the motion flow<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"4\">\n<p>Flow Block<\/p>\n<\/td>\n<td>\n<p>Syandby Flow Block \u2013 Waiting Time<\/p>\n<\/td>\n<td>\n<p>Motion Control \u2192 Motion Flow \u2192 Standby Flow Block \u2192 Waiting Time<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Positioning Block &#8211; Axis 1 Change Value<\/p>\n<p>Positioning Block &#8211; Axis 2 Change Value<\/p>\n<p>Positioning Block \u2013 Axis 3 Change Value<\/p>\n<p>Positioning Block &#8211; Axis 4 Change Value<\/p>\n<p>Positioning Block &#8211; Axis 5 Change Value<\/p>\n<p>Positioning Block \u2013 Axis 6 Change Value<\/p>\n<p>Positioning Block &#8211; Axis 7 Change Value<\/p>\n<p>Positioning Block &#8211; Axis 8 Change Value<\/p>\n<p>Positioning Block &#8211; Axis 9 Change Value<\/p>\n<p>Positioning Block &#8211; Axis 10 Change Value<\/p>\n<p>Positioning Block \u2013 Axis 11 Change Value<\/p>\n<p>Positioning Block \u2013 Axis 12 Change Value<\/p>\n<p>Positioning Block \u2013 Axis 13 Change Value<\/p>\n<p>Positioning Block \u2013 Axis 14 Change Value<\/p>\n<p>Positioning Block \u2013 Axis 15 Change Value<\/p>\n<p>Positioning Block &#8211; Axis 16 Change Value<\/p>\n<\/td>\n<td>\n<p>\u904b\u52d5\u63a7\u5236 \u2192 \u904b\u52d5\u6d41\u7a0b \u2192 \u5b9a\u4f4d\u63a7\u5236\u6d41\u7a0b\u584a \u2192 \u66f4\u6539\u884c\u70ba : \u6539\u8b8a\u7576\u524d\u5ea7\u6a19\u3001\u6539\u8b8a\u76ee\u6a19\u4f4d\u7f6e\u3001\u4e2d\u65b7\u5b9a\u9577\u4ee5\u53ca\u4e2d\u65b7\u5b9a\u89d2 \u2192 \u8ef8 1 \u5230\u8ef8 16 \u66f4\u6539\u503c<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Positioning Block \u2013 Change Speed<\/p>\n<\/td>\n<td>\n<p>Motion Control \u2192 Motion Flow \u2192 Position Control Flow Block \u2192 Change Behavior: Speed Change \u2192 Changed Value<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Positionig Block \u2013 Change Behavior<\/p>\n<\/td>\n<td>\n<p>Motion Control \u2192 Motion Flow \u2192 Position Control Flow Block \u2192 Change Behavior<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<p>Uperlogic Motion Parameter Mapping Table is shown below:<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/mplc-m06-en-09\/mplc-m06-en-09-001.png\" \/><\/p>\n<p>Mapping table operation bit usage timing:<\/p>\n<p>1. When the FUN198 MFMapTbPrm mapping table writing command is triggered by the rising edge, it will write the value in the R register set by the PLC into the table corresponding to MOTION, and output the DN signal after the writing is completed. Once writing, the command must be reset first, and then perform the same action.<\/p>\n<p>2. Please pay attention to the timing of writing and calling the motion control table data. The mapping table writing command can be used at any time and will be written into the motion control table immediately. The timing of calling the motion control table data is divided into Immediate Effect and Effective on First Entry. There are two types of effect, immediate effect means that the current value is directly overwritten during the call, and the effect when entering for the first time means that the value already in the call will not be overwritten, so it will not take effect until the next call. Please see table below for the timing of data call in different control modes :<\/p>\n<div class=\"fatek-tw\">\n<table>\n<thead>\n<tr>\n<th>\n<p><strong>Motion Control Parameter Table<\/strong><\/p>\n<\/th>\n<th>\n<p><strong>Control Mode<\/strong><\/p>\n<\/th>\n<th>\n<p><strong>Call Timing<\/strong><\/p>\n<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>\n<p>Point Table<\/p>\n<\/td>\n<td>\n<p>Position Control Mode<\/p>\n<\/td>\n<td>\n<p>Effective on First Entry<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Axis Table<\/p>\n<\/td>\n<td>\n<p>Arbitrarily Control Mode<\/p>\n<\/td>\n<td>\n<p>Effective on First Entry<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Synchronous Table<\/p>\n<\/td>\n<td>\n<p>Syncgronous Control Mode<\/p>\n<\/td>\n<td>\n<p>Immediate Effect<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Axis Speed<\/p>\n<\/td>\n<td>\n<p>Speed Control Mode <\/p>\n<\/td>\n<td>\n<p>Immediate Effect<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Axis Torque<\/p>\n<\/td>\n<td>\n<p>Torque Control Mode<\/p>\n<\/td>\n<td>\n<p>Immediate Effect<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Synchronous Contacts<\/p>\n<\/td>\n<td>\n<p>Sychronous Control Mode<\/p>\n<\/td>\n<td>\n<p>Immediate Effect<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Internal Variables<\/p>\n<\/td>\n<td>\n<p>Arbitrarily Control Mode<\/p>\n<\/td>\n<td>\n<p>Immediate Effect<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Flow Block<\/p>\n<\/td>\n<td>\n<p>Arbitrarily Control Mode<\/p>\n<\/td>\n<td>\n<p>Immediate Effect<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<p>* : In synchronous mode, the axis special relay can decide to take effect immediately or in the next synchronous cycle.<\/p>\n<h3>9-2 Motion Parameter Mapping Table Using Method<\/h3>\n<p>Provided below is the Motion Parameter Mapping Table using method;<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>No. <\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Action<\/strong><\/p>\n<\/td>\n<td>\n<p><strong> Remark<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>1<\/p>\n<\/td>\n<td>\n<p>Click \u201cAdd\u201d in Motion Parameter Mapping Table. <\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/mplc-m06-en-09\/mplc-m06-en-09-002.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>2<\/p>\n<\/td>\n<td>\n<p>Select motion parameter group<\/p>\n<p>Point table\/axis table\/or synchronization table<\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/mplc-m06-en-09\/mplc-m06-en-09-003.jpg\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>3<\/p>\n<\/td>\n<td>\n<p>Select index<\/p>\n<p>When the Point Table index is the desired No. xx Point motion parameter<\/p>\n<p>When the Axis Table index is the desired No. xx Axis parameter<\/p>\n<p>When the Synchronization Table index is the No. xx axis parameter<\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/mplc-m06-en-09\/mplc-m06-en-09-004.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>4<\/p>\n<\/td>\n<td>\n<p>Select the item<\/p>\n<p>Each motion parameter group contains its own motion parameters <\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/mplc-m06-en-09\/mplc-m06-en-09-005.jpg\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>5<\/p>\n<\/td>\n<td>\n<p>Designate address R<\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/mplc-m06-en-09\/mplc-m06-en-09-006.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>6<\/p>\n<\/td>\n<td>\n<p>The designated initial bit required for the operating bit shall be a multiple of \u201c8\u201d. <\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/mplc-m06-en-09\/mplc-m06-en-09-007.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>7<\/p>\n<\/td>\n<td>\n<p>Write the value to be changed in \u201cR\u201d.<\/p>\n<\/td>\n<td>\n<p>Bigger value will occupy 2 units of \u201cR\u201d.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>8<\/p>\n<\/td>\n<td>\n<p>By turning on the operating bit, the PLC program will write the designated motion parameter in R.<\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>Ladder program example:<\/p>\n<p>Block status signal M16000: 000= 160+block number<\/p>\n<p>Block end signal M12000: 000= block number<\/p>\n<p>M160 = Operating bit<\/p>\n<p>R160 = Mapping address<\/p>\n<p>1. When Flow begins and when PLC reads M16021 is ON, it will run the initialization for M160 OFF. <\/p>\n<p>2. When Flow is under standby and when PLC reads M12040, it will execute M160 ON and then write \u201c10000\u201d value in R160 (mapping address). <\/p>\n<p>3. When Flow executes the positioning control and when PLC reads M12041, it will execute M160 ON and then write \u201c-10000\u201d value in R160 (mapping address).<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/mplc-m06-en-09\/mplc-m06-en-09-008.png\" \/><\/p>\n<h3>9-3 Precautions for Use<\/h3>\n<p>Description of instructions on using the Motion Parameter Mapping Table:<\/p>\n<p>1. In the Motion Parameter Table, the operating bit and the address user needs to designate the first position only and the rest will be arranged by the system automatically.<\/p>\n<p>2. If the axis is moving when changing the motion command, such as position and speed, then the parameters in the Motion Point Table will remain unchanged. The motion mapping change won\u2019t become effective until the next round of motion after stopping the current motion. <\/p>\n<p>3. If the Motion Synchronization Table has been changed, the mapping parameter can be used after being included even though the synchronous control is executed by the system at that time. <\/p>\n<p>4. Reminder: If the \u201cR\u201d designated by the mapping parameter is set as shutdown non-holding type, then \u201cR\u201d will become zero after restarting the PLC. If the user wishes to hold the mapping parameter \u201cR\u201d after restarting the PLC, please set it as the shutdown holding type. <\/p>\n<p>5. When writing the mapping parameter in PLC Ladder, such action should be executed according to \u201cmotion control flow block end signal\u201d and \u201cmotion control flow block running signal\u201d.<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Motion control flow block end signal<\/p>\n<\/td>\n<td>\n<p>M12000 + block number<\/p>\n<\/td>\n<td>\n<p>0: Standby<\/p>\n<p>1: Flow block running done<\/p>\n<p>* Set at \u201cOFF\u201d when running such flow block next time. <\/p>\n<\/td>\n<td>\n<p>Read Only<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Motion control flow block running signal<\/p>\n<\/td>\n<td>\n<p>M16160 + block number<\/p>\n<\/td>\n<td>\n<p>0: Flow block is not running<\/p>\n<p>1: Flow block is running<\/p>\n<\/td>\n<td>\n<p>Read Only<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n","protected":false},"excerpt":{"rendered":"<p>Motion Parameter Mapping Table 9-1 Introduction of Moti [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[50],"tags":[],"class_list":["post-3255","post","type-post","status-publish","format-standard","hentry","category-en-mplc-m06"],"_links":{"self":[{"href":"https:\/\/resource.fatek.com\/index.php\/wp-json\/wp\/v2\/posts\/3255","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/resource.fatek.com\/index.php\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/resource.fatek.com\/index.php\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/resource.fatek.com\/index.php\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/resource.fatek.com\/index.php\/wp-json\/wp\/v2\/comments?post=3255"}],"version-history":[{"count":0,"href":"https:\/\/resource.fatek.com\/index.php\/wp-json\/wp\/v2\/posts\/3255\/revisions"}],"wp:attachment":[{"href":"https:\/\/resource.fatek.com\/index.php\/wp-json\/wp\/v2\/media?parent=3255"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/resource.fatek.com\/index.php\/wp-json\/wp\/v2\/categories?post=3255"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/resource.fatek.com\/index.php\/wp-json\/wp\/v2\/tags?post=3255"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}