{"id":3361,"date":"2026-11-17T18:42:59","date_gmt":"2026-11-17T10:42:59","guid":{"rendered":"https:\/\/resource.fatek.com\/index.php\/2026\/11\/17\/p5hmi-fvd-en-19\/"},"modified":"2026-11-17T18:42:59","modified_gmt":"2026-11-17T10:42:59","slug":"p5hmi-fvd-en-19","status":"publish","type":"post","link":"https:\/\/resource.fatek.com\/index.php\/2026\/11\/17\/p5hmi-fvd-en-19\/","title":{"rendered":"Chapter 19 Objects"},"content":{"rendered":"<p>FvDesigner provides plenty of objects for users, the following is a list of all available objects and an introduction to each object.<\/p>\n<h3>19.1 Object Planning and Properties Modification<\/h3>\n<p>There are two ways to place an object onto the work space:<\/p>\n<ol>\n<li>Left-click the mouse on an object in the object section of the design page in the function section and then left-click the mouse on the work space.<\/li>\n<li>Use the mouse to drag-and-drop an object in the toolbox onto the work space.<\/li>\n<\/ol>\n<p>Every object added to the work space will appear in the object list and has its own unique ID. There are two ways to view and change the properties of an object:<\/p>\n<ol>\n<li>Double-click on the object and the setting page of the object will appear.<\/li>\n<li>Single-click on an object and then click on the right mouse button to display the object menu, and then select Properties.<\/li>\n<\/ol>\n<p>When the objects on the screen overlap, you can right-click the object, and the \u3010Overlapping Object List\u3011will appear in the order for users to view<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-001.png\" \/><\/p>\n<p>Figure 236 Object List\u3010Overlapping Object List\u3011<\/p>\n<p>The Monitor Address can be set for many objects. This means that the data source of this object is from the register address of the device (HMI, PLC). Details can be viewed at the\u3010Memory Address\u3011section of the screen in order for the user to have a better understanding of the usage status of the registers.<\/p>\n<p>Part of the objects can be set from the Ribbon workspace\u3010Theme\u3011on the software interface, as shown in the figure below.<\/p>\n<p>Note: The Ribbon only has some common settings. Detailed settings for each object must be set through another method.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-002.png\" \/><\/p>\n<p>Figure 237 \u3010Theme\u3011in\u3010Ribbon workspace\u3011\u3010Design\u3011paging<\/p>\n<p>The following is the list of objects provided by the FvDesigner; click on the hyperlink of the object\u2019s name to view the detailed descriptions of the object.<\/p>\n<p>Table 112 Image Objects and Basic Object Library Categories<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Function<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Draw\u3011<\/strong><\/p>\n<\/td>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Function<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong><img decoding=\"async\" alt=\"C:\\Users\\GtLin\\Desktop\\48x48\\point.png\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-003.png\" \/>\u3010Dot\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Draw a dot<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong><img decoding=\"async\" alt=\"C:\\Users\\GtLin\\Desktop\\48x48\\line.png\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-004.png\" \/>\u3010Line\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Draw a line<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong><img decoding=\"async\" alt=\"C:\\Users\\GtLin\\Desktop\\48x48\\broken_line.png\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-005.png\" \/>\u3010Polyline\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Draw a polyline<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong><img decoding=\"async\" alt=\"C:\\Users\\GtLin\\Desktop\\48x48\\square.png\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-006.png\" \/>\u3010Rectangular\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Draw a rectangle<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong><img decoding=\"async\" alt=\"C:\\Users\\GtLin\\Desktop\\48x48\\polygon.png\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-007.png\" \/>\u3010Polygon\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Draw a polygon<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong><img decoding=\"async\" alt=\"D:\\code\\tool\\WinProDesigner\\resource\\16x16\\circle.png\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-008.png\" \/>\u3010Ellipse\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Draw an ellipse<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong><img decoding=\"async\" alt=\"C:\\Users\\GtLin\\Desktop\\48x48\\arc.png\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-009.png\" \/>\u3010Arc\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Draw an arc<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong><img decoding=\"async\" alt=\"C:\\Users\\GtLin\\Desktop\\48x48\\sector.png\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-010.png\" \/>\u3010Pie\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Draw a pie<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong><img decoding=\"async\" alt=\"C:\\Users\\GtLin\\Desktop\\mark\\table.png\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-011.png\" \/>\u3010Table\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Draw a table<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong><img decoding=\"async\" alt=\"C:\\Users\\GtLin\\Desktop\\48x48\\type.png\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-012.png\" \/>\u3010Text\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Text input block<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong><img decoding=\"async\" alt=\"C:\\Users\\GtLin\\Desktop\\48x48\\image.png\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-013.png\" \/>\u3010Image\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Insert image block<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-014.jpg\" \/>\u3010Scale\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Insert linear scale<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-015.png\" \/><strong>\u3010Pipeline\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Draw a pipeline<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>Basic Draw components.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Lamp\/Switch\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Basic Lamp\/Switch.<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Function<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong><img decoding=\"async\" alt=\"C:\\Users\\GtLin\\Desktop\\48x48\\light.png\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-016.png\" \/>\u3010Lamp\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Use the changes in the lamp icon to display the status of an address.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong><img decoding=\"async\" alt=\"C:\\Users\\fatek\\Desktop\\11.26\\48x48\\bit_switch.png\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-017.png\" \/>\u3010Bit Switch\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Allow users to press the switch to change the bit status.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong><img decoding=\"async\" alt=\"C:\\Users\\fatek\\Desktop\\11.26\\48x48\\word_switch.png\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-018.png\" \/>\u3010Word Switch\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Allow users to press the switch to change the word value.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong><img decoding=\"async\" alt=\"C:\\Users\\fatek\\Desktop\\11.26\\48x48\\change_screen.png\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-019.png\" \/>\u3010Change Screen\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Allow users to press the switch to change the currently displayed screen.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong><img decoding=\"async\" alt=\"D:\\Qt\\Simba_GT_20130705\\Simba\\tool\\WinProDesigner\\resource\\48x48\\funtion-key.png\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-020.png\" \/>\u3010Function Switch\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Allow users to press the switch to execute specific functions.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Numeric\/Text\u3011<\/strong><\/p>\n<\/td>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Function<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong><img decoding=\"async\" alt=\"C:\\Users\\fatek\\Desktop\\11.26\\48x48\\numeric_display.png\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-021.png\" \/>\u3010Numeric Input\/Display\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Display\/Input the value saved on the address.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong><img decoding=\"async\" alt=\"C:\\Users\\fatek\\Desktop\\11.26\\48x48\\text_display.png\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-022.png\" \/>\u3010Text Input\/Display\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Display\/Input the text saved on the address.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-023.png\" \/><strong>\u3010QR Code Input\/Display\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Display QR code<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>Numeric\/Text Display\/Input.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Display\u3011<\/strong><\/p>\n<\/td>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Function<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong><img decoding=\"async\" alt=\"C:\\Users\\fatek\\Desktop\\11.26\\48x48\\date_time_display.png\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-024.png\" \/>\u3010Date\/Time Display\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Display the current date and time according to the format set by the user.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong><img decoding=\"async\" alt=\"D:\\Qt\\Simba_GT_20130705\\Simba\\tool\\WinProDesigner\\resource\\48x48\\call-window.png\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-025.png\" \/>\u3010Window Screen Display\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Display the window screens created in the project.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>Display Date\/Time, Window Screen Display<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Graph\u3011<\/strong><\/p>\n<\/td>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Function<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong><img decoding=\"async\" alt=\"D:\\Qt\\Simba_GT_20130705\\Simba\\tool\\WinProDesigner\\resource\\48x48\\clock.png\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-026.png\" \/>\u3010Meter\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Use a pointer to represent data<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong><img decoding=\"async\" alt=\"C:\\Users\\fatek\\Desktop\\SIMBA_11.11\\48x48\\linear_meter.png\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-027.png\" \/>\u3010Linear Meter\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Use the bar length\/width changes to represent data<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-028.png\" \/><strong>\u3010Circular Graph\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Display the value in an arc<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong><img decoding=\"async\" alt=\"C:\\Users\\fatek\\Desktop\\SIMBA_11.11\\48x48\\data_block_graph.png\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-029.png\" \/>\u3010Data Block Graph\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Captures continuous data and plots it as a curve.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong><img decoding=\"async\" alt=\"C:\\Users\\fatek\\Desktop\\SIMBA_11.11\\48x48\\data_block_xy_scatter.png\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-030.png\" \/>\u3010Data Block XY Scatter\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Capture continuous data and plots it as a scatter plot.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>Graph<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Other Switch\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Other Switches.<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Function<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong><img decoding=\"async\" alt=\"D:\\Qt\\Simba_GT_20130705\\Simba\\tool\\WinProDesigner\\resource\\48x48\\progress.png\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-031.png\" \/>\u3010Multistate Switch\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Write the values corresponding to the status set by the user sequentially into the address.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong><img decoding=\"async\" alt=\"D:\\Qt\\Simba_GT_20130705\\Simba\\tool\\WinProDesigner\\resource\\48x48\\sly.png\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-032.png\" \/>\u3010Slide Switch\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Allow users to write the value into the address by dragging a slide.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong><img decoding=\"async\" alt=\"D:\\Qt\\Simba_GT_20130705\\Simba\\tool\\WinProDesigner\\resource\\48x48\\option.png\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-033.png\" \/>\u3010Selector List\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Display values with a pull-down menu allowing the user to select the value needed.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-034.jpg\" \/><strong>\u3010Radio Button\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Combine multiple buttons into a group, Only one of the group buttons will be ON.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Keypad\u3011<\/strong><\/p>\n<\/td>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Function<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong><img decoding=\"async\" alt=\"C:\\Users\\fatek\\Desktop\\11.26\\48x48\\input_display.png\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-035.png\" \/>\u3010Input Display\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Used to display the currently entered value or text on the keypad screen.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong><img decoding=\"async\" alt=\"D:\\Qt\\Simba_GT_20130705\\Simba\\tool\\WinProDesigner\\resource\\48x48\\key.png\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-036.png\" \/>\u3010Key\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Used to provide the functions required for entering values or text, etc. on the keypad screen.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong><img decoding=\"async\" alt=\"C:\\Users\\fatek\\Desktop\\11.26\\48x48\\numeric_display.png\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-037.png\" \/>\u3010Limit Value Display\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Used to display the currently allowed maximum or minimum input value on the keypad screen.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>Keypad related objects.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Animated Graphic\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Animated Graphic. <\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Function<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong><img decoding=\"async\" alt=\"C:\\Users\\fatek\\Desktop\\11.26\\48x48\\animation.png\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-038.png\" \/>\u3010Animated Graphic\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Used when a dynamic display of changes in status, address and size is required.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-039.jpg\" \/><strong>\u3010Rotation Indicator\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Changing the indicator of Rotation Indicator direction and speed by register.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-040.jpg\" \/>\u3010Gif Display\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Select a .gif image to display.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Data Log\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Data Log-related objects.<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Function<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong><img decoding=\"async\" alt=\"C:\\Users\\fatek\\Desktop\\SIMBA_11.11\\48x48\\trend.png\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-041.png\" \/>\u3010Historic Trend\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Plot the data and corresponding time acquired by the\u3010Data Log\u3011onto a curve.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong><img decoding=\"async\" alt=\"D:\\Qt\\Simba\\tool\\WinProDesigner\\resource\\48x48\\historic_xy_scatter.png\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-042.png\" \/>\u3010Historic XY Scatter\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Plot the data acquired by the\u3010Data Log\u3011as a historic XY scatter.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong><img decoding=\"async\" alt=\"C:\\Users\\fatek\\Desktop\\SIMBA icon_12.31\\48x48\\historic_data_table.png\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-043.png\" \/>\u3010Historic Data Table\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Display the data acquired by the\u3010Data Log\u3011as a table.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-044.jpg\" \/>\u3010Historic Data Selector\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Read the\u3010Historic XY Scatter\u3011or\u3010Historic Data Table\u3011data table files. The corresponding file can be selected from a dropdown menu.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Alarm\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Alarm-related objects.<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Function<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong><img decoding=\"async\" alt=\"C:\\Users\\fatek\\Desktop\\12.5\\48x48\\alarm_display.png\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-045.png\" \/>\u3010Alarm Display\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Use a table to display alarm-related contents including messages , levels, when the alarm occurred, if alarm was acknowledged the recovery time, etc.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong><img decoding=\"async\" alt=\"D:\\Qt\\Simba_GT_20130705\\Simba\\tool\\WinProDesigner\\resource\\48x48\\alarm-marquee.png\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-046.png\" \/>\u3010Alarm Scrolling Text\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Use a scrolling text to display alarm-related contents including messages, levels, when the alarm occurred, if alarm was acknowledged, recovery time, etc.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-047.jpg\" \/>\u3010Alarm Data Selector\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Use a dropdown menu to display alarm-related contents, including messages, levels, when the alarm occurred, if alarm was acknowledged, recovery time, etc.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Recipe\u3011<\/strong><\/p>\n<\/td>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Function<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong><img decoding=\"async\" alt=\"D:\\Qt\\Simba_GT_20130705\\Simba\\tool\\WinProDesigner\\resource\\48x48\\basic-recipe.png\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-048.png\" \/>\u3010Recipe Selector\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Used to select the recipe.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong><img decoding=\"async\" alt=\"C:\\Users\\fatek\\Desktop\\12.5\\48x48\\recipe_viewer.png\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-049.png\" \/>\u3010Recipe Table\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Used to view or edit the recipe.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>Recipe-related objects. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Operation Logger\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Operation Logger-related objects.<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Function<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong><img decoding=\"async\" alt=\"C:\\Users\\fatek\\Desktop\\SIMBA_11.11\\48x48\\operation_viewer.png\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-050.png\" \/>\u3010Operation Viewer\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>View the Operation Logger. <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Schedule\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Schedule-related objects.<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Function<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-051.jpg\" \/><strong>\u3010Schedule Setting Table\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Table of view and setting up.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Video Input\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Video Input-related objects.<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Function<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-052.png\" \/>\u3010Video Input Display\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Display the video image.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h3>19.2 Object Operation Page Setting<\/h3>\n<p>The paging is shown in the figure below, and the meanings of each setting option are as follows:<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-053.png\" \/><\/p>\n<p>Figure 238 Object Setting page for\u3010Operation\u3011<\/p>\n<p>Table 113 Property settings for\u3010Operation\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Visibility Control\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Visibility control of the object. It can be controlled by a specific Bit or by User Level.<\/p>\n<p>\u3010Enable by Bit\u3011<\/p>\n<p>Select to control visibility by a specific Bit.<\/p>\n<p>\u3010Address\u3011<\/p>\n<p>Set the address of the visibility control Bit.<\/p>\n<p>\u3010State\u3011<\/p>\n<p>Set the control bit as 1 or 0 to show object. <\/p>\n<p>\u3010Enabled by Word\u3011<\/p>\n<p>Check whether the visibility is controlled by word.<\/p>\n<p>\u3010Address\u3011<\/p>\n<p>Set the visibility control word address.<\/p>\n<p>\u3010Condition\u3011<\/p>\n<p>Set the condition of word control and when it is true then show up the object, when false not show the object. The condition include\u2019 =\u2019,\u2019 !=\u2019, \u2018&gt;\u2019, \u2018&lt;\u2019, \u2018&gt;=\u2019, \u2018&lt;=\u2019.<\/p>\n<p>\u3010Enabled by Security\u3011<\/p>\n<p>Select if visibility is to be controlled by the level of the user logged in.<\/p>\n<p>\u3010User Level Condition\u3011<\/p>\n<p>Set the level and condition of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Operation Control\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Operation control of the object. It can be controlled by a specific Bit or User Level.<\/p>\n<p>\u3010Enable by Bit\u3011<\/p>\n<p>Select to control operation by a specific Bit.<\/p>\n<p>\u3010Show Disabled Sign\u3011<\/p>\n<p>Check if you want to display the forbidden symbol, it\u2019s valid when check\u3010Enable by Bit\u3011,\u3010Enabled by Word\u3011 or\u3010Enable by Security\u3011.<img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-054.jpg\" \/><\/p>\n<p>\u3010Address\u3011<\/p>\n<p>Set the address of the operation control Bit.<\/p>\n<p>\u3010State\u3011<\/p>\n<p>Set the control bit as 1 or 0 to operate object. <\/p>\n<p>\u3010Enabled by Word\u3011<\/p>\n<p>Check whether the operation is controlled by word.<\/p>\n<p>\u3010Address\u3011<\/p>\n<p>Set the operation control word address.<\/p>\n<p>\u3010Condition\u3011<\/p>\n<p>Set the condition of word control and when it is true then the object can be controlled, when false not the object can not be controlled. The condition include\u2019 =\u2019,\u2019 !=\u2019, \u2018&gt;\u2019, \u2018&lt;\u2019, \u2018&gt;=\u2019, \u2018&lt;=\u2019.<\/p>\n<p>\u3010Enabled by Security\u3011<\/p>\n<p>Select if operation is to be controlled by the level of the user logged in.<\/p>\n<p>\u3010User Level Condition\u3011<\/p>\n<p>Set the level and condition of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Operation Log\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Select to enable the\u3010Operation Log\u3011of the object.<\/p>\n<p>It can also edit operation messages, in which the message can be inputted directly or acquired from the\u3010Text Library\u3011.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Advanced Operation Control\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Input Timeout\u3011<\/p>\n<p>Select if the\u3010Pop-up Keypad\u3011,\u3010On-screen Keypad\u3011or\u3010USB Barcode Scanner\u3011is controlled by time.<\/p>\n<p>\u3010Timeout Time\u3011<\/p>\n<p>If the user did not operate the\u3010Keypad Screen\u3011within this time, the system will close the\u3010Keypad Screen\u3011and cancel this operation.<\/p>\n<p>\u3010Operation Confirm\u3011<\/p>\n<p>Select to display the confirmation window after the operation is executed.<\/p>\n<p>\u3010Max Waiting Time\u3011<\/p>\n<p>The system will close the confirmation window and cancel this operation if the user did not acknowledge it within this time.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Position and Size\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the position and size of the object on the screen.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h3>19.3 Draw Object Properties Dialog<\/h3>\n<h4>19.3.1 \u3010Dot\u3011<\/h4>\n<h5>19.3.1.1 \u3010Setting\u3011<\/h5>\n<p>The \u3010Dot\u3011\u3010Setting<strong>\u3011<\/strong>page is a shown in the figure below. Each option is explained.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-055.png\" \/><\/p>\n<p>Figure 239 Setting page for\u3010Dot\u3011<\/p>\n<p>Table 114 Property settings for\u3010Dot\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Preview\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Preview the appearance of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Dot\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Type\u3011<\/p>\n<p>Set the type of dot. <\/p>\n<p><strong>\u3010<\/strong>Color<strong>\u3011<\/strong><\/p>\n<p>Set the color of the dot. <\/p>\n<p><strong>\u3010<\/strong>Size<strong>\u3011<\/strong><\/p>\n<p>Set the size of the dot.<\/p>\n<p><strong>\u3010<\/strong>Blink<strong>\u3011<\/strong><\/p>\n<p>Set the blinking of the dot; four blinking speeds are available for selection: None, Fast, Medium and Slow. <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h4>19.3.2 \u3010Line\u3011<\/h4>\n<h5>19.3.2.1 \u3010Setting\u3011<\/h5>\n<p>The<strong>\u3010<\/strong>Line\u3011\u3010Setting<strong>\u3011<\/strong>page is a shown in the figure below. Each option is explained.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-056.png\" \/><\/p>\n<p>Figure 240 Setting page for\u3010Line\u3011<\/p>\n<p>Table 115 Property settings for\u3010Line\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Preview\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Preview the appearance of the object. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Line\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>\u3010<\/strong>Color\/Width\u3011<\/p>\n<p>Set the color and the width of the line.<\/p>\n<p><strong>\u3010<\/strong>Type\u3011<\/p>\n<p>Set the type of line. <\/p>\n<p><strong>\u3010<\/strong>Arrow\u3011<\/p>\n<p>Set whether to have arrows on the ends of the line.<\/p>\n<p><strong>\u3010<\/strong>Start Type\u3011<\/p>\n<p>Set the arrow type at the start of the line.<\/p>\n<p><strong>\u3010<\/strong>End Type\u3011<\/p>\n<p>Set the arrow type at the end of the line.<\/p>\n<p><strong>\u3010<\/strong>Blink\u3011<\/p>\n<p>Set the blinking speed of the line; four blinking speeds are available for selection: None, Fast, Medium and Slow.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>Tips:<\/p>\n<ol>\n<li>User can create a line at an angle that is a multiple of 45 degrees (including horizontal and vertical line) easily by holding &quot;Shift&quot; while creating the line.<\/li>\n<li>If user modifies the line\u2019s length while pressing &quot;Shift&quot;, the line\u2019s angle will be fixed.<\/li>\n<li>Generally (without pressing any keypad), the angle can be changed at multiples of 5 degrees.<\/li>\n<li>If user modifies the line\u2019s length while pressing &quot;Alt&quot;, the line angle can be changed freely<\/li>\n<\/ol>\n<h4>19.3.3 \u3010Polyline\u3011<\/h4>\n<h5>19.3.3.1 \u3010Setting\u3011<\/h5>\n<p>The <strong>\u3010<\/strong>Polyline<strong>\u3011\u3010<\/strong>Setting<strong>\u3011<\/strong>page is a shown in the figure below. Each option is explained.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-057.png\" \/><\/p>\n<p>Figure 241 Setting page for\u3010Polyline\u3011<\/p>\n<p>Table 116 Property setting for\u3010Polyline\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Preview\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Preview the appearance of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Line\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>\u3010<\/strong>Color\/Width\u3011<\/p>\n<p>Set the color and the width of the line.<\/p>\n<p><strong>\u3010<\/strong>Type\u3011<\/p>\n<p>Set the type of line.<\/p>\n<p><strong>\u3010<\/strong>Arrow\u3011<\/p>\n<p>Set whether to have arrows on the ends of the line.<\/p>\n<p><strong>\u3010<\/strong>Start Type\u3011<\/p>\n<p>Set the arrow type at the start of the line.<\/p>\n<p><strong>\u3010<\/strong>End Type\u3011<\/p>\n<p>Set the arrow type at the end of the line.<\/p>\n<p><strong>\u3010<\/strong>Blink\u3011<\/p>\n<p>Set the blinking speed of the line; four blinking speeds are available for selection: None, Fast, Medium and Slow.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>Users can freely modify the corresponding dot positions for\u3010Polyline\u3011, as well as add or delete a dot.<\/p>\n<ol>\n<li>To modify the relative position of a dot<\/li>\n<\/ol>\n<p>When the user double-clicks on an object, a dragging block will be displayed for the dots of this object; this is when you can change the position of the dots, as shown in the figure below:<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-058.png\" \/><\/p>\n<p>Figure 242 Illustration diagram when users double-click on a\u3010Polyline\u3011<\/p>\n<ol>\n<li>Adding a dot<\/li>\n<\/ol>\n<p>When the user double-clicks on an object, a dragging block will be displayed for the dots of this object; move the mouse anywhere on the line and the cursor will change to <img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-059.png\" \/>. At this time, press and hold the left mouse button and move the mouse to insert a dot anywhere you want.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-060.png\" \/><\/p>\n<p>Figure 243 Illustration diagram of adding a dot on a\u3010Polyline\u3011<\/p>\n<ol>\n<li>Deleting a dot<\/li>\n<\/ol>\n<p>When the user double-clicks on an object, a dragging block will be displayed for the dots of this object; move the mouse onto any block on the line and the cursor will change to <img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-061.png\" \/>. At this time, press and hold the right mouse button to display the option to delete the dot.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-062.png\" \/><\/p>\n<p>Figure 244 Illustration diagram of deleting a dot on a\u3010Polyline\u3011<\/p>\n<h4>19.3.4 \u3010Rectangle\u3011<\/h4>\n<h5>19.3.4.1 \u3010Setting\u3011<\/h5>\n<p>The \u3010Rectangle\u3011\u3010Setting\u3011page is a shown in the figure below. Each option is explained.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-063.png\" \/><\/p>\n<p>Figure 245 Setting page for\u3010Rectangular\u3011<\/p>\n<p>Table 117 Property setting for\u3010Rectangular\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Preview\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Preview the appearance of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Line\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Color\/Width\u3011<\/p>\n<p>Set the color and the width of the line.<\/p>\n<p>\u3010Type\u3011<\/p>\n<p>Set the type of line.<\/p>\n<p>\u3010Opacity\u3011<\/p>\n<p>Set the opacity of the line.<\/p>\n<p>\u3010Blink\u3011<\/p>\n<p>Set the blinking speed; four blinking speeds are available for selection: None, Fast, Medium and Slow.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Fill\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Color\u3011<\/p>\n<p>Set the color or material type of the fill.<\/p>\n<p>\u3010Opacity\u3011<\/p>\n<p>Set the opacity of the fill.<\/p>\n<p>\u3010Blink\u3011<\/p>\n<p>Set the blinking of the fill; four blinking speeds are available for selection: None, Fast, Medium and Slow.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Corner Type\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Type\u3011<\/p>\n<p>Set the corner type. Supports Normal, Rounded, and Clipped.<\/p>\n<p>\u3010Corner Size(H)\u3011<\/p>\n<p>Set the horizontal size of the corner.<\/p>\n<p>\u3010Corner Size(V)\u3011<\/p>\n<p>Set the vertical size of the corner.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h4>19.3.5 \u3010Polygon\u3011<\/h4>\n<p>\u3010Polygon\u3011is similar to\u3010Polyline\u3011. Users can freely modify the corresponding dot positions as well as add and delete dots. The operating method is identical to\u3010Polyline\u3011.<\/p>\n<h5>19.3.5.1 \u3010Setting\u3011<\/h5>\n<p>The \u3010Polygon\u3011\u3010Setting\u3011page is a shown in the figure below. Each option is explained.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-064.png\" \/><\/p>\n<p>Figure 246 Setting page for\u3010Polygon\u3011<\/p>\n<p>Table 118 Property settings for\u3010Polygon\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Preview\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Preview the appearance of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Line\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>\u3010<\/strong>Color\/Width\u3011<\/p>\n<p>Set the color and the width of the line.<\/p>\n<p><strong>\u3010<\/strong>Type\u3011<\/p>\n<p>Set the type of line.<\/p>\n<p>\u3010Opacity\u3011<\/p>\n<p>Set the opacity of the line.<\/p>\n<p><strong>\u3010<\/strong>Blink\u3011<\/p>\n<p>Set the blinking speed of the line; four blinking speeds are available for selection: None, Fast, Medium and Slow.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Fill\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>\u3010<\/strong>Color\u3011<\/p>\n<p>Set the color or material type of the fill.<\/p>\n<p><strong>\u3010<\/strong>Opacity\u3011<\/p>\n<p>Set the opacity of the fill.<\/p>\n<p><strong>\u3010<\/strong>Blink\u3011<\/p>\n<p>Set the blinking speed of the fill; four blinking speeds are available for selection: None, Fast, Medium and Slow.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h4>19.3.6 \u3010Ellipse\u3011<\/h4>\n<h5>19.3.6.1 \u3010Setting\u3011<\/h5>\n<p>The\u3010Ellipse\u3011\u3010Setting\u3011page is a shown in the figure below. Each option is explained.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-065.png\" \/><\/p>\n<p>Figure 247 Setting page for\u3010Ellipse\u3011<\/p>\n<p>Table 119 Property settings for\u3010Ellipse\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Preview\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Preview the appearance of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Line\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>\u3010<\/strong>Color\/Width\u3011<\/p>\n<p>Set the color and the width of the line.<\/p>\n<p><strong>\u3010<\/strong>Type\u3011<\/p>\n<p>Set the type of line.<\/p>\n<p>\u3010Opacity\u3011<\/p>\n<p>Set the opacity of the line. <\/p>\n<p><strong>\u3010<\/strong>Blink\u3011<\/p>\n<p>Set the blinking speed of the line; four blinking speeds are available for selection: None, Fast, Medium and Slow.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Fill\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>\u3010<\/strong>Color\u3011<\/p>\n<p>Set the color or material type of the fill.<\/p>\n<p><strong>\u3010<\/strong>Opacity\u3011<\/p>\n<p>Set the opacity of the fill.<\/p>\n<p><strong>\u3010<\/strong>Blink\u3011<\/p>\n<p>Set the blinking speed of the fill; four blinking speeds are available for selection: None, Fast, Medium and Slow.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h4>19.3.7 \u3010Arc\u3011<\/h4>\n<h5>19.3.7.1 \u3010Setting\u3011<\/h5>\n<p>The\u3010Arc\u3011\u3010Setting\u3011page is a shown in the figure below. Each option is explained.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-066.png\" \/><\/p>\n<p>Figure 248 Setting page for\u3010Arc\u3011<\/p>\n<p>Table 120 Property settings for\u3010Arc\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Preview\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Preview the appearance of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Line\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>\u3010<\/strong>Color\/Width\u3011<\/p>\n<p>Set the color and the width of the line.<\/p>\n<p><strong>\u3010<\/strong>Type\u3011<\/p>\n<p>Set the type of line.<\/p>\n<p><strong>\u3010<\/strong>Blink\u3011<\/p>\n<p>Set the blinking speed of the line; four blinking speeds are available for selection: None, Fast, Medium and Slow.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Arc Angle\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>\u3010<\/strong>Start Angle\u3011<\/p>\n<p>Set the starting angle of the arc.<\/p>\n<p><strong>\u3010<\/strong>End Angle\u3011<\/p>\n<p>Set the ending angle of the arc.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>Users can change the angle of the\u3010Arc\u3011directly:<\/p>\n<p>When the user clicks on the object, dragging blocks will appear at the two ends of this object. Drag the blocks to change the angle of the arc.<\/p>\n<h4>19.3.8 \u3010Pie\u3011<\/h4>\n<h5>19.3.8.1 \u3010Setting\u3011<\/h5>\n<p>The\u3010Pie\u3011\u3010Setting\u3011page is a shown in the figure below. Each option is explained.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-067.png\" \/><\/p>\n<p>Figure 249 Setting page for\u3010Pie\u3011<\/p>\n<p>Table 121 Property settings for\u3010Pie\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Preview\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Preview the appearance of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Line\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>\u3010<\/strong>Color\/Width\u3011<\/p>\n<p>Set the color and the width of the line.<\/p>\n<p><strong>\u3010<\/strong>Type\u3011<\/p>\n<p>Set the type of line.<\/p>\n<p><strong>\u3010<\/strong>Opacity\u3011<\/p>\n<p>Set the opacity of the line.<\/p>\n<p><strong>\u3010<\/strong>Blink\u3011<\/p>\n<p>Set the blinking speed of the line; four blinking speeds are available for selection: None, Fast, Medium and Slow.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Fill\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>\u3010<\/strong>Color\u3011<\/p>\n<p>Set the color or material type of the fill.<\/p>\n<p><strong>\u3010<\/strong>Opacity\u3011<\/p>\n<p>Set the opacity of the fill.<\/p>\n<p><strong>\u3010<\/strong>Blink\u3011<\/p>\n<p>Set the blinking speed of the fill; four blinking speeds are available for selection: None, Fast, Medium and Slow.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Pie Angle\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>\u3010<\/strong>Start Angle\u3011<\/p>\n<p>Set the starting angle of the pie.<\/p>\n<p><strong>\u3010<\/strong>End Angle\u3011<\/p>\n<p>Set the ending angle of the pie.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>Users can change the angle of the<strong>\u3010<\/strong>Pie\u3011directly:<\/p>\n<p>When the user clicks on the object, dragging blocks will appear at the two ends of this object. Drag the blocks to change the angle of the arc.<\/p>\n<h4>19.3.9 \u3010Table\u3011<\/h4>\n<h5>19.3.9.1 \u3010Setting\u3011<\/h5>\n<p>The\u3010Table\u3011\u3010Setting\u3011page is a shown in the figure below. Each option is explained.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-068.png\" \/><\/p>\n<p>Figure 250 Setting page for\u3010Table\u3011<\/p>\n<p>Table 122 Property settings for\u3010Table\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Preview\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Preview the appearance of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Border\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>\u3010<\/strong>Color\/Width\u3011<\/p>\n<p>Set the color and the width of the border.<\/p>\n<p><strong>\u3010<\/strong>Type\u3011<\/p>\n<p>Set the border type. <\/p>\n<p><strong>\u3010<\/strong>Blink\u3011<\/p>\n<p>Set the blinking speed of the border; four blinking speeds are available for selection: None, Fast, Medium and Slow.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Table Grid\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>\u3010<\/strong>Row\u3011<\/p>\n<p>Set the number of rows for the table.<\/p>\n<p><strong>\u3010<\/strong>Column\u3011<\/p>\n<p>Set the number of columns for the table.<\/p>\n<p><strong>\u3010<\/strong>Equal Grid Height\u3011<\/p>\n<p>Set the cells in the table to have the same height.<\/p>\n<p><strong>\u3010<\/strong>Equal Grid Width\u3011<\/p>\n<p>Set the cells in the table to have the same width.<\/p>\n<p><strong>Note: When\u3010Equal Grid Height\u3011and\u3010Equal Grid Width\u3011are not selected, users can drag the border of the grids to change the size of the grids.<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Fill\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>\u3010<\/strong>Color\u3011<\/p>\n<p>Set the color or material type of the fill.<\/p>\n<p><strong>\u3010<\/strong>Blink\u3011<\/p>\n<p>Set the blinking speed of the fill; four blinking speeds are available for selection: None, Fast, Medium and Slow.<\/p>\n<p><strong>\u3010<\/strong>Opacity\u3011<\/p>\n<p>Set the opacity of the fill.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Horizontal Inside Line\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Select to display the horizontal grid lines.<\/p>\n<p><strong>\u3010<\/strong>Color\/Width\u3011<\/p>\n<p>Set the color and width of the horizontal grid lines.<\/p>\n<p><strong>\u3010<\/strong>Type\u3011<\/p>\n<p>Set the type of horizontal grid line.<\/p>\n<p><strong>\u3010<\/strong>Blink\u3011<\/p>\n<p>Set the blinking speed of the fill; four blinking speeds are available for selection: None, Fast, Medium and Slow.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Vertical Inside Line\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Select to display the vertical grid lines.<\/p>\n<p><strong>\u3010<\/strong>Color\/Width\u3011<\/p>\n<p>Set the color and width of the vertical grid lines.<\/p>\n<p><strong>\u3010<\/strong>Type\u3011<\/p>\n<p>Set the type of vertical grid line.<\/p>\n<p><strong>\u3010<\/strong>Blink\u3011<\/p>\n<p>Set the blinking speed of the fill; four blinking speeds are available for selection: None, Fast, Medium and Slow.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h4>19.3.10 \u3010Text\u3011<\/h4>\n<h5>19.3.10.1 \u3010Setting\u3011<\/h5>\n<p>The\u3010Text\u3011\u3010Setting\u3011page is a shown in the figure below. Each option is explained.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-069.png\" \/><\/p>\n<p>Figure 251 Settings page for\u3010Text\u3011<\/p>\n<p>Table 123 Property settings for\u3010Text\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Preview\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Preview the appearance of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Text\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>\u3010<\/strong>Font\u3011<\/p>\n<p>Set the font of the text.<\/p>\n<p><strong>\u3010<\/strong>Format\u3011<\/p>\n<p>Set the format of the text, bold, italics or bottom line.<\/p>\n<p><strong>\u3010<\/strong>Color\u3011<\/p>\n<p>Set the color of the text.<\/p>\n<p><strong>\u3010<\/strong>Size\u3011<\/p>\n<p>Set the size of the text, default is 20.<\/p>\n<p><strong>\u3010<\/strong>Direction\u3011<\/p>\n<p>Set the direction of the text, optional vertical or horizontal.<\/p>\n<p><strong>\u3010<\/strong>Alignment\u3011<\/p>\n<p>Set the alignment of the text.<\/p>\n<p><strong>\u3010<\/strong>Margin\u3011<\/p>\n<p>Set the margin of the text, it will only work when<strong>\u3010<\/strong>Font Size Correlates with Geometry\u3011is checked.<\/p>\n<p><strong>\u3010<\/strong>Word Spacing\u3011<\/p>\n<p>Set word sapcing of the text.<\/p>\n<p><strong>\u3010<\/strong>Line Spacing\u3011<\/p>\n<p>Set line spacing of the text.<\/p>\n<p><strong>\u3010<\/strong>Font Size Correlates with Geometry\u3011<\/p>\n<p>The size of the object may change more or less by the font size.<\/p>\n<p><strong>\u3010<\/strong>Blink\u3011<\/p>\n<p>Select to turn on the blinking function for the texts.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Display\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Divided into two parts: borders and backgrounds; can be set individually.<\/p>\n<p>Border:<\/p>\n<p><strong>\u3010<\/strong>Show Border\u3011<\/p>\n<p>Select to display the border. When it is checked, the color, width and blinking function of the border can be set at the bottom.<\/p>\n<p><strong>\u3010<\/strong>Color\/Thickness\u3011<\/p>\n<p>Set the displayed color and thickness of the border.<\/p>\n<p><strong>\u3010<\/strong>Blink\u3011<\/p>\n<p>Set to turn on the blinking function of the border.<\/p>\n<p>Background:<\/p>\n<p><strong>\u3010<\/strong>Show Background\u3011<\/p>\n<p>Select to display the background. When it is checked, the color, width and blinking function of the background can be set at the bottom.<\/p>\n<p><strong>\u3010<\/strong>Color\u3011<\/p>\n<p>Set the background color of the object.<\/p>\n<p><strong>\u3010<\/strong>Blink\u3011<\/p>\n<p>Set to turn on the blinking function for the background of the object.<\/p>\n<p><strong>\u3010<\/strong>Opacity\u3011<\/p>\n<p>Set the background opacity of the object. The larger the value, the less transparent the background.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Content\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Fill the words you want, can be entered directly or by the \u3010Font Library\u3011.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h4>19.3.11 \u3010Image\u3011<\/h4>\n<h5>19.3.11.1 \u3010Setting\u3011<\/h5>\n<p>The\u3010Image\u3011\u3010Setting\u3011page is a shown in the figure below. Each option is explained.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-070.png\" \/><\/p>\n<p>Figure 252 Settings page for\u3010Image\u3011<\/p>\n<p>Table 124 Property settings for\u3010Image\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Preview\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Preview the appearance of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Setting\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>\u3010<\/strong>Mode\u3011<\/p>\n<p><strong>\u3010<\/strong>Static\u3011Display fixed image, can select from file or library.<\/p>\n<p><strong>\u3010<\/strong>Dynamic\u3011Switch image dynamically, more details in the next chapter.<\/p>\n<p><strong>\u3010<\/strong>Source\u3011<\/p>\n<p><strong>\u3010<\/strong>Static\u3011Display the path of image.<\/p>\n<p><strong>\u3010<\/strong>Dynamic\u3011Can set the path of dynamic image, more details in the next chapter.<\/p>\n<p><strong>\u3010<\/strong>Size\u3011<\/p>\n<p>When the mode is\u3010Static\u3011, this option can be used.<\/p>\n<p>It is use to setup the limit of the image size.<\/p>\n<p>     <strong>\u3010<\/strong>Original Size\u3011The size of the image object is fixed at its original size.<\/p>\n<p><strong>\u3010<\/strong>Fixed Ratio\u3011the image object can be scaled proportional to its original ratio. <\/p>\n<p>The image object can be stretched freely when neither is selected.<\/p>\n<p><strong>\u3010<\/strong>Rotate\u3011<\/p>\n<p>Set the rotate degree of the figure, including CW 0 Degrees, CW 90 Degrees, CW 180 Degrees and CW 270 Degrees.<\/p>\n<p><strong>\u3010<\/strong>Flip\u3011<\/p>\n<p>Set the degree the image is rotated, including no flip, X Axis and Y Axis.<\/p>\n<p><strong>\u3010<\/strong>Tone Type\u3011<\/p>\n<p>There are multiple color modes to choose from.<\/p>\n<p><strong>\u3010<\/strong>Tone Color\u3011<\/p>\n<p>Set the color to apply when using<strong>\u3010<\/strong>Tone Type\u3011.<\/p>\n<p>\u3010Remove Background\u3011<\/p>\n<p>The mode can be enabled when\u3010Static\u3011is selected and a image has been selected. After checking it, you can click the button of \u3010Select Color\u3011to select the color to be deleted.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Background\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>\u3010<\/strong>Color\u3011<\/p>\n<p>Set the background color.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Animation\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Check whether to enable animated effects. <\/p>\n<p>\u3010Mode\u3011Choose whether to use static or dynamic control elements to flicker.<\/p>\n<p>  \u3010Blink\u3011Select the blinking mode, and use the numerical value to switch during dynamic control.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Brightness\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the brightness of the image object. The greater the value the brighter the object will be displayed.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Opacity\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the opacity of the image object. The greater the value the less transparent the object will be displayed.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Border\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the border of the image object. The display appearance of the border can be set once this option is selected.<\/p>\n<p><strong>\u3010<\/strong>Color\/Thickness\u3011<\/p>\n<p>Set the displayed color and thickness of the border.<\/p>\n<p><strong>\u3010<\/strong>Type\u3011<\/p>\n<p>Set the border type.<\/p>\n<p><strong>\u3010<\/strong>Blink\u3011<\/p>\n<p>Set the blinking speed of the border. Four blinking speeds are available for selection: None, Fast, Medium and Slow.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.3.11.2 Dynamic Image Setting<\/h5>\n<p>The following describes the settings when\u3010Dynamic\u3011option is selected.<\/p>\n<p>Note : The images that can be read are limited to JPG\/PNG\/BMP, and the file size must be less than 2MB.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-071.jpg\" \/><\/p>\n<p>Figure 253 Dynamic Image Setting Page<\/p>\n<p>Table 125 Property settings for Dynamic Image<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Source\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Select the source path, including Internal, SD Sard, and USB drive.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010File Folder\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>If\u3010Dynamic Folder\u3011is not checked, it will be in\u3010Static\u3011mode.<\/p>\n<p>\u3010Static\u3011<\/p>\n<p>If didn\u2019t set the folder name, the default file is in the outermost layer of the USB. If did set up the folder name, it will be read in the specified folder.<\/p>\n<p>It should be noted that only can read one layer of folders in \u3010Static\u3011mode, and no slashes are required.<\/p>\n<p>\u3010Dynamic folder\u3011<\/p>\n<p>The data type is\u3010Ascii\u3011, the length of the string can be set below, and the length of the continuous occupied register will be automatically calculated. The maximum string of characters is 100 words, and the folder name can be dynamically changed according to the content of the register.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010File Name\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>It can be divided into\u3010Static\u3011and\u3010Dynamic\u3011file names. If \u3010Dynamic\u3011is not checked, it will be\u3010Static\u3011and the file name can be set directly below. If\u3010Dynamic\u3011is checked, the data type is\u3010Ascii\u3011. The length of the string can be set below, and the length of the continuous occupied register will be automatically calculated. The maximum length of the string is 100 words, and the file name can be dynamically changed according to the content of the register.<\/p>\n<p>The file name can be manually selected using the file name extractor. Please click the text below to refer to\u3010Filename Extractor\u3011.<\/p>\n<p>The file name needs to be added with a file extension, for example: image.jpg<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Update Bit\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set a bit register as a trigger to read the picture according to the file name, update it when it is on, and it will automatically change back to off after the end.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Result Address\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Displays the address of the read result, the result address is in  word. The following is the result address definition table:<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Value(16Bit-INT)<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Definition<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>1<\/strong><\/p>\n<\/td>\n<td>\n<p>Reading Success<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>2<\/strong><\/p>\n<\/td>\n<td>\n<p>Reading<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>3<\/strong><\/p>\n<\/td>\n<td>\n<p>Reading Failed<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>4<\/strong><\/p>\n<\/td>\n<td>\n<p>Reading image exceeds file size limit<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h4>19.3.12 \u3010Scale\u3011<\/h4>\n<h5>19.3.12.1 \u3010Setting\u3011<\/h5>\n<p>The\u3010Scale\u3011\u3010Setting\u3011page is a shown in the figure below. Each option is explained.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-072.png\" \/><\/p>\n<p>Figure 254 Settings Page for\u3010Scale\u3011<\/p>\n<p>Table 126 Property Settings for\u3010Scale\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Preview\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Preview the appearance of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Line\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>\u3010<\/strong>Color\/Width\u3011<\/p>\n<p>Set the line width and color.<\/p>\n<p><strong>\u3010<\/strong>Line Type\u3011<\/p>\n<p>Select the appearance of the line.<\/p>\n<p><strong>\u3010<\/strong>Sub Scale Length\u3011<\/p>\n<p>Set the length of the minor scales.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Scale\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>\u3010<\/strong>Number of Major Ticks\u3011<\/p>\n<p>Set the number of major divisions of the scale.<\/p>\n<p><strong>\u3010<\/strong>Number of Sub Divisions\u3011<\/p>\n<p>Set the number of minor divisions of the scale.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Direction\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>\u3010<\/strong>Horizontal\u3011<\/p>\n<p>Set to align the scale horizontally. If the scale has text, the text is displayed above.<\/p>\n<p><strong>\u3010<\/strong>Vertical\u3011<\/p>\n<p>Set to align the scale vertically. If the scale has text, the text is displayed on the right.<\/p>\n<p><strong>\u3010<\/strong>Inverse\u3011<\/p>\n<p>If the scale is aligned horizontally, set to display the text below the scale.<\/p>\n<p>If the scale is aligned vertically, set to display the text on the left side of the scale.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Text\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>\u3010<\/strong>Font\u3011<\/p>\n<p>Select the font of the text.<\/p>\n<p><strong>\u3010<\/strong>Size\u3011<\/p>\n<p>Select the size of the text.<\/p>\n<p><strong>\u3010<\/strong>Color\u3011<\/p>\n<p>Select the color of the text.<\/p>\n<p><strong>\u3010<\/strong>Format\u3011<\/p>\n<p>Set the format of the text.<\/p>\n<p><strong>\u3010<\/strong>Precision\u3011<\/p>\n<p>Set the number of decimal places for the text.<\/p>\n<p><strong>\u3010<\/strong>Right\/Bottom Value\u3011<\/p>\n<p>When the direction is horizontal, set the far right value of the text.<\/p>\n<p>When the direction is vertical, set the bottom value of the text.<\/p>\n<p><strong>\u3010<\/strong>Left\/Top Value\u3011<\/p>\n<p>When the direction is horizontal, set the far left value of the text.<\/p>\n<p>When the direction is vertical, set the top value of the text.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h4>19.3.13 \u3010Pipeline\u3011<\/h4>\n<p>FvDesigner provide user can build pipeline easily and can use in different environment , such as water treatment application,display flow state and effect, etc.<\/p>\n<p>The object can except drang\u3010Pipeline\u3011from\u3010Toolbox\u3011\u3010Draw\u3011to work space, also can drag from\u3010Ribbon\u3011\u3010Draw\u3011, figure as shown below.<\/p>\n<p><img decoding=\"async\" alt=\"C:\\Users\\chien yu\\Desktop\\fv 1.5 pic\\97.jpg\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-073.jpg\" \/><\/p>\n<p>Figure 255\u3010Pipeline\u3011in\u3010Toolbox\u3011<\/p>\n<p><img decoding=\"async\" alt=\"C:\\Users\\chien yu\\Desktop\\fv 1.5 pic\\98.jpg\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-074.jpg\" \/><\/p>\n<p>Figure 256\u3010Pipeline\u3011in\u3010Ribbon\u3011<\/p>\n<h5>19.3.13.1 \u3010General\u3011<\/h5>\n<p>The\u3010Pipeline\u3011\u3010General\u3011page is as shown in the figure below, the meaning of each setting item are listed below:<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-075.png\" \/><\/p>\n<p>Figure 257 Settings Page for\u3010Pipeline\u3011\u3010General\u3011<\/p>\n<p>Table 127\u3010General\u3011Properties of\u3010Pipeline\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Property<\/p>\n<\/td>\n<td>\n<p>Description<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Preview\u3011<\/p>\n<\/td>\n<td>\n<p>Preview the appearance of this object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Display\u3011<\/p>\n<\/td>\n<td>\n<p>\u3010Type\u3011<\/p>\n<p>Pipeline has 3 types to choose, right side you can click\u30103D Effect\u3011,totally 5 types. <\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Type<\/p>\n<\/td>\n<td>\n<p>Illustration<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Right Angle Tyoe<\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-076.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Arc Angle Tyoe<\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-077.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Water Pipe Type<\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-078.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>3D Arc Angle Tyoe<\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-079.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>3D Water Pipe Type<\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-080.png\" \/><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>\u3010Pipe Diameter\u3011<\/p>\n<p>Set the diameter of pipe, the length of each pipe affects the maximum diameter, with a maximum diameter of 40.<\/p>\n<p>\u3010Pipe Background Color\u3011<\/p>\n<p>Set the background color of pipe, if the\u3010Multi-State\u3011has checked, then set the color in the below table. <\/p>\n<p>\u3010Border Color\/Width\u3011<\/p>\n<p>Set the color and width of border.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Dynamic\u3011<\/p>\n<\/td>\n<td>\n<p>\u3010Multi-State\u3011<\/p>\n<p>Check the pipeline whether to be multi-states function.<\/p>\n<p>\u3010Multi-State\u3011\u3010State Address\u3011<\/p>\n<p>Set the reading address of multi-state, the pipeline will read this adress to change different states, such as set the address as R30, when R30=0 display state 1, when R30=1 display state 2, when R30=2 display state 3, and so on.<\/p>\n<p>\u3010Multi-State\u3011\u3010State Numbers\u3011<\/p>\n<p>Set the state numbers.<\/p>\n<p>\u3010Multi-State\u3011\u3010Table\u3011<\/p>\n<p>Set the color of each state.<\/p>\n<p>\u3010Enable Blink\u3011<\/p>\n<p>Check whether to let pipeline blink, if checked, will show up the address and speed options to set, such as set the address set as M10, when M10=ON the pipeline will blink. <\/p>\n<p>\u3010Enable Flow\u3011<\/p>\n<p>Check whether to let pipeline show flow effect, if checked, will show up the address and speed options to set, such as set the address set as M20, when M20=ON the pipeline will show flow effect.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.3.13.2 \u3010Pipe Item\u3011<\/h5>\n<p>The\u3010Pipeline\u3011\u3010Pipe Item\u3011page is as shown in the figure below, the meaning of each setting item are listed below:<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-081.png\" \/><\/p>\n<p>Figure 258 Settings Page for\u3010Pipeline\u3011\u3010Pipe Item\u3011<\/p>\n<p>Table 128\u3010Pipe Item\u3011Properties of\u3010Pipeline\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Property<\/p>\n<\/td>\n<td>\n<p>Description<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Insert\u3011<\/p>\n<\/td>\n<td>\n<p>Insert joint to the middle of the pipe or add at the end of the pipe.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Delete\u3011<\/p>\n<\/td>\n<td>\n<p>Delete pipe or joint of the pipeline, the first pipe cannot be deleted and the pipe that connected to the back will be deleted. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Table\u3011<\/p>\n<\/td>\n<td>\n<p>Display all of the pipe item, choose the pipe item , can modify the property of\u3010General\u3011and\u3010Flow Effect\u3011modify the property.<\/p>\n<p>All of the pipe items are as follows:<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Type<\/p>\n<\/td>\n<td>\n<p>Illustration<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Pipe_H<\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" alt=\"C:\\ComposedImage\\0.png\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-082.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Pipe_V<\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" alt=\"C:\\ComposedImage\\1.png\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-083.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Joint_L_LD<\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" alt=\"C:\\ComposedImage\\2.png\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-084.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Joint_L_LU<\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" alt=\"C:\\ComposedImage\\3.png\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-085.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Joint_L_RD<\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" alt=\"C:\\ComposedImage\\4.png\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-086.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Joint_L_RU<\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" alt=\"C:\\ComposedImage\\5.png\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-087.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Joint_T_L<\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" alt=\"C:\\ComposedImage\\6.png\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-088.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Joint_T_R<\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" alt=\"C:\\ComposedImage\\7.png\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-089.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Joint_T_D<\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" alt=\"C:\\ComposedImage\\9.png\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-090.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Joint_T_U<\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" alt=\"C:\\ComposedImage\\9.png\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-091.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Joint_X<\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" alt=\"C:\\ComposedImage\\10.png\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-092.png\" \/><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Pipe Item\u3011<\/p>\n<\/td>\n<td>\n<p>\u3010General\u3011\u3010Type\u3011<\/p>\n<p>Set the type of pipe item, only joint can be modified.<\/p>\n<p>\u3010General\u3011\u3010Length\u3011<\/p>\n<p>Set the length of pipe item, only pipe can be modified. <\/p>\n<p>\u3010Flow Effect\u3011<\/p>\n<p>Set the flow effect of pipe item, only pipe can be modified.<\/p>\n<p>\u3010Flow Effect\u3011\u3010Type\u3011<\/p>\n<p>Set the type of all flow effect. <\/p>\n<p>Flow effect types as follows:<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Type<\/p>\n<\/td>\n<td>\n<p>Illustration<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Arrow Flow Solid<\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-093.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Arrow Flow Hollow<\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-094.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Triangle Flow Solid<\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-095.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Triangle Flow Hollow<\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-096.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Polygon Flow 1 Solid<\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-097.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Polygon Flow 1 Hollow<\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-098.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Polygon Flow 2 Solid<\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-099.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Polygon Flow 2 Hollow<\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-100.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Single Angle Flow<\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-101.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Double Angle Flow<\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-102.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Single Line Flow<\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-103.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Double Line Flow<\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-104.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Single Wave Flow<\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-105.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Double Wave Flow<\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-106.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Rectangle Flow Solid<\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-107.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Rectangle Flow Hollow<\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-108.png\" \/><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>\u3010Flow Effect\u3011\u3010Color\u3011<\/p>\n<p>Set the color of flow effect type.<\/p>\n<p>\u3010Flow Effect\u3011\u3010Copy to All Items(Direction Not Included)\u3011<\/p>\n<p>Copy the flow effect to all items. <\/p>\n<p>\u3010Flow Effect\u3011\u3010Direction\u3011<\/p>\n<p>Set the direction of flow effect. <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.3.13.3 Pipeline Pipe Add or Delete<\/h5>\n<p>\u3010Pipeline\u3011in addition to adding, inserting and deleting in\u3010Pipe Item\u3011of object properties setting, also can click the right mouse botton and select the desired item to modify the pipe or joint, the quick menu will be displayed and select the item will to modify.<\/p>\n<p>Setting methods as follow:<\/p>\n<ul>\n<li>\n<ul>\n<li>\n<ul>\n<li>\n<ol>\n<li>Modify joint:<\/li>\n<\/ol>\n<\/li>\n<\/ul>\n<\/li>\n<\/ul>\n<\/li>\n<\/ul>\n<p>  First, click the object you would like to modify and will appear a red outer frame, as the left figure below.<\/p>\n<p>Second, click the right botton of the mouse on the joint that you want to modify, then will appear a quick menu, as the middle figure below.<\/p>\n<p>Third, click replace and select the joint , result as the right figure below.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-109.png\" \/><\/p>\n<p>Figure 259\u3010Pipeline\u3011click the right mouse button to modify joint<\/p>\n<ul>\n<li>\n<ul>\n<li>\n<ul>\n<li>\n<ol>\n<li>Insert pipe:<\/li>\n<\/ol>\n<\/li>\n<\/ul>\n<\/li>\n<\/ul>\n<\/li>\n<\/ul>\n<p>First, First, click the object you would like to modify and will appear a red outer frame, as the left figure below.<\/p>\n<p>Second, click the right botton of the mouse on the pipe that you want to modify, then will appear a quick menu, as the middle figure below.<\/p>\n<p>Third, click replace and select the joint , result as the right figure below.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-110.png\" \/><\/p>\n<p>Figure 260\u3010Pipeline\u3011click the right mouse button to insert pipe<\/p>\n<ul>\n<li>\n<ul>\n<li>\n<ul>\n<li>\n<ol>\n<li>Remove pipe or joint :<\/li>\n<\/ol>\n<\/li>\n<\/ul>\n<\/li>\n<\/ul>\n<\/li>\n<\/ul>\n<p>First, click the object you would like to remove and will appear a red outer frame, as the left figure below.<\/p>\n<p>Second, click the right botton of the mouse on the object that you want to remove, then will appear a quick menu, as the middle figure below.<\/p>\n<p>Third, click remove then the object will be removed , result as the right figure below.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-111.png\" \/><\/p>\n<p>Figure 261\u3010Pipeline\u3011click the right mouse button to remove pipe or joint<\/p>\n<h3>19.4 Base Object Properties Dialog<\/h3>\n<h4>19.4.1 \u3010Lamp\u3011<\/h4>\n<p>When the numeric value of an address has changed, the\u3010Lamp\u3011object can be used to map the changes of each numeric value of the register to a specific icon (such as bright or dim lamp) in order to allow a more intuitive understanding of the current numeric value of the register.<\/p>\n<h5>19.4.1.1 \u3010Setting\u3011<\/h5>\n<p>The\u3010Lamp\u3011\u3010Setting\u3011page is as shown in the figure below, the meaning of each setting item are listed below:<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-112.png\" \/><\/p>\n<p>Figure 262\u3010Setting\u3011Screen of\u3010Lamp\u3011<\/p>\n<p>Table 129\u3010Setting\u3011Properties of\u3010Lamp\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Preview\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Preview the appearance of this object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Name\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The default name of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Comment\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the comment of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Update\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Provide user can select a suitable speed to get the latest data under different situation, such as you would like to get the latest data or adjust the object on the screen to display first, etc.<\/p>\n<p>Provide three modes:<\/p>\n<p>\u3010once\u3011: update once only when switch to this page or use the system tag\u3010OP_UPDATE_SCREEN_OBJECTS\u3011, update once when trigger once a time, it will keep update if the monitor address is internal address.<\/p>\n<p>\u3010normal\u3011: normal update speed.<\/p>\n<p>\u3010fast\u3011: the fastest update speed.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Address\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Type\u3011<\/p>\n<p>Set whether the monitored address of the lamp is a Bit or Word. The default setting is Bit.<\/p>\n<p>\u3010Address\u3011<\/p>\n<p>Set the address for the lamp to monitor.<\/p>\n<p>\u3010Enable Extended Lamp Feature\u3011<\/p>\n<p>Set to enable extra features for the lamp object. When set, extension options will appear to the right. The original address set in the window will no longer be read and is replaced by the\u3010Addresses 0~3\u3011in the dialog as shown below. After checked, the original\u3010Type\u3011and\u3010Data Type\u3011setting value will be changed from the following figure\u3010Data Type\u3011to set.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-113.jpg\" \/><\/p>\n<p>\u3010Data Type\u3011<\/p>\n<p>Set the address type of\u3010Addresses 0~3\u3011. Data types include Bit, 16Bit-BCD, 16Bit-INT, 16Bit-UINT, 32Bit-BCD, 32Bit-INT and 32Bit-UINT.<\/p>\n<p>\u3010Number of states\u3011<\/p>\n<p>Set the number of states the lamp will have.<\/p>\n<p>\u3010State Switch Condition\u3011<\/p>\n<p>Set how the state of the lamp is determined. The conditions include\u3010Change State by Bit Combination\u3011,\u3010Change State by Bit\u3011, or\u3010Change State by Data\u3011.<\/p>\n<p>\u3010Change State by Bit Combination\u3011uses\u3010Addresses 0~3\u3011in combination to switch the displayed state. <\/p>\n<p>For example, the\u3010Number of states\u3011is 4,\u3010Address 0\u3011is M80,\u3010Address 1\u3011is M82,\u3010Addresses 2\u3011and\u3010Addresses 3\u3011are not set, the state will be determined as follows:<\/p>\n<p>M80 = OFF and M82 = OFF State 0<\/p>\n<p>M80 = ON and M82 = OFF State 1<\/p>\n<p>M80 = OFF and M82 = ON State 2<\/p>\n<p>M80 = ON and M82 = ON State 3, and so on.<\/p>\n<p>\u3010Change State by Bit\u3011refers to\u3010Addresses 0~3\u3011to switch the displayed state.<\/p>\n<p>For example, the\u3010Data Type\u3011is set to Bit, the\u3010Number of states\u3011is 4,\u3010Address 0\u3011is M80,\u3010Address 1\u3011is M82,\u3010Address 2\u3011is M84, and\u3010Address 3\u3011is not set, the state will be determined as follows:<\/p>\n<p>M80, M82, M84 = OFF State 0<\/p>\n<p>M80 = ON, M82 = OFF, M84 = OFF State 1<\/p>\n<p>M80 = OFF, M82 = ON, M84 = OFF State 2<\/p>\n<p>M80 = OFF, M82 = OFF, M84 = ON State 3, and so on.<\/p>\n<p>If the\u3010Data Type\u3011is 16Bit-UINT, the\u3010Number of states\u3011is 5,\u3010Address 0\u3011is R40, the other addresses are not set, when R40 = 0 the state is 0. R40 = 1, state 1. R40 = 2, state 2. R40 = 4, state 3. R40 = 8, state 4.<\/p>\n<p>\u3010Change State by Data\u3011refers to switching the display status according to the value of\u3010Address 0\u3011. In\u3010Data Type\u3011, this option will appear for all types except Bit type.<\/p>\n<p>If the\u3010Data Type\u3011is 16Bit-Uint, the\u3010Number of states\u3011is 5,\u3010Address 0\u3011is R40, the other addresses are not set, when R40 = 0, the state is 0. R40 = 1, state 1. R40 = 2, state 2, R40 = 3, state 3, R40 = 4, state 4, and so on.<\/p>\n<p>\u3010Addresses 0~3\u3011<\/p>\n<p>Specify the address to use to determine the state of the lamp.<\/p>\n<p>\u3010Data Type\u3011<\/p>\n<p>Set the data type of the lamp; this setting item will appear when the type is set as Word.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010State\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Number of States\u3011<\/p>\n<p>Set the number of states of the lamp. When the Lamp Type is Bit, the number of states is fixed as 2. If the Type is Word, it can be set between 2~256.<\/p>\n<p>\u3010Custom State Value\u3011<\/p>\n<p>When choose\u3010Word\u3011, you can check\u3010Custom State Value\u3011beside the\u3010Number of States\u3011.<\/p>\n<p>If didn\u2019t check\u3010Custom State Value\u3011, for example, the address of the lamp is R52, munber of states is two, then R52=0, state display as 0, R52=1, state display as 1.<\/p>\n<p>After checked\u3010Custom State Value\u3011, you can press\u3010Detail\u3011to set each single value and range corresponding to the state.<\/p>\n<p>Setting dialog as figure below.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-114.jpg\" \/><\/p>\n<p>\u3010Out of Range Display State\u3011<\/p>\n<p>Set the status to be displayed when the value exceeds the corresponding range<\/p>\n<p>\u3010Single Value\u3011<\/p>\n<p>Set the mode corresponding to the state as single value, the field will changed after checked, then you can set each value corresponding to the state in\u3010Value\u3011field.<\/p>\n<p>\u3010Range\u3011<\/p>\n<p>Set the mode corresponding to the state as range, the field will changed after checked, then you can set each value corresponding to the state in\u3010Lower Limit\u3011and\u3010Upper Limit\u3011field.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.1.2 \u3010Display\u3011<\/h5>\n<p>The\u3010Lamp\u3011\u3010Display\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p> <img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-115.png\" \/><\/p>\n<p>Figure 263\u3010Display\u3011Setting Screen of\u3010Lamp\u3011<\/p>\n<p>Table 130\u3010Display\u3011Setting Properties of\u3010Lamp\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010State\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Select the state to be edited. 0 and 1 buttons are provided to enable quick switching between states 0 and 1.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Text\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Direct Text Font\u3011<\/p>\n<p>Set the font of the text displayed for the current editing state.<\/p>\n<p>\u3010Direct Text Size\u3011<\/p>\n<p>Set the size of the text displayed for the current editing state.<\/p>\n<p>\u3010Position\u3011<\/p>\n<p>Set the position of the text displayed for the current editing state.<\/p>\n<p>\u3010Blink\u3011<\/p>\n<p>Set the blinking function for the text of the current editing state. There are four blinking speeds available to choose from: None, Slow, Medium and Fast.<\/p>\n<p>\u3010Scrolling Text\u3011<\/p>\n<p>Set the scrolling text function for the text of the current editing state. There are four scrolling speeds available to choose, from\u00a0slow to fast.<\/p>\n<p>\u3010Format\u3011<\/p>\n<p>Set the format of the text displayed for the current editing state, including Bold, Italics and Underline.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the color of the text displayed for the current editing state.<\/p>\n<p>\u3010Copy Attributes to All States\u3011<\/p>\n<p>The text properties for the current editing state is applied to all states.<\/p>\n<p>\u3010Content (Direct Text)\u3011<\/p>\n<p>Set the text displayed for the current editing state. It can be inputted directly or acquired from the\u3010Text Library\u3011.<\/p>\n<p>\u3010Copy to All States\u3011<\/p>\n<p>Apply the settings of the text for the current editing state to all states.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Background\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Background\u3011<\/p>\n<p>Check whether to enable background<\/p>\n<p>\u3010Image\u3011<\/p>\n<p>Check whether to use image<\/p>\n<p>\u3010Source\u3011<\/p>\n<p>Set whether to use an image for the displayed background of the current editing state. When this option is checked, an\u3010Image Selector\u3011will appear asking the user to select an image either from the\u3010Image Library\u3011or from\u3010File\u3011.<\/p>\n<p>\u3010Size\u3011<\/p>\n<p>You can set the picture to use \u3010Original Size\u3011, or check \u3010Fixed Ratio\u3011 to maintain a fixed length and width ratio when stretching<\/p>\n<p>\u3010Rotate\u3011<\/p>\n<p>Set image rotation angle<\/p>\n<p>\u3010Flip\u3011<\/p>\n<p>Set the flip direction of the image, includes No Flip, X-Axis and Y-Axis.<\/p>\n<p>\u3010Tone Type\u3011<\/p>\n<p>You can choose the tone type you want to change. After selecting the type, you can choose the color from\u3010Tone Color\u3011.<\/p>\n<p>\u3010Remove Background\u3011<\/p>\n<p>You can set the color to be transparent by\u3010Choose Color\u3011.<\/p>\n<p>\u3010Background\u3011<\/p>\n<p>Check whether to enable the background. After checking, you can set the background color displayed in the current editing state from\u3010Color\u3011.<\/p>\n<p>\u3010Animation\u3011<\/p>\n<p>Check whether to enable animated effects. <\/p>\n<p>\u3010Mode\u3011Choose whether to use static or dynamic control elements to flicker.<\/p>\n<p>\u3010Blink\u3011Select the blinking mode, and use the numerical value to switch during dynamic control.<\/p>\n<p>\u3010Copy to All States\u3011<\/p>\n<p>Apply the settings of the background for the currently editing state to all states.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Border\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the border of the lamp object, set the appearance after checked.<\/p>\n<p>\u3010Color\/Width\u3011<\/p>\n<p>Set the color and width of the border.<\/p>\n<p>\u3010Type\u3011    <\/p>\n<p>Set the type of the boder, click <img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-116.png\" \/> for more types.<\/p>\n<p>\u3010Copy to All States\u3011<\/p>\n<p>Apply the settings of the border for the currently editing state to all states.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.1.3 \u3010External Lable\u3011<\/h5>\n<p>The\u3010Lamp\u3011\u3010External Lable\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-117.png\" \/><\/p>\n<p>Figure 264\u3010External Lable\u3011Setting Screen of\u3010Lamp\u3011<\/p>\n<p>Table 131\u3010Lamp\u3011\u3010External Lable\u3011setting properties<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Option<\/p>\n<\/td>\n<td>\n<p>Description<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Enable External Lable\u3011<\/p>\n<\/td>\n<td>\n<p>Checked, the bottom will appear the external lable settings of the object. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Direction\u3011<\/p>\n<\/td>\n<td>\n<p>Set the display direction, there are horizontal and vertical two selections.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Space\u3011<\/p>\n<\/td>\n<td>\n<p>Set the space between external lable and the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Left\/Top Lable(Direct Text)\u3011<\/p>\n<\/td>\n<td>\n<p>Fill in the text to be displayed on the left \/ top lable of the object, can be directly input or selected from\u3010Font Library\u3011. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Right\/Bottom Lable(Direct Text)\u3011<\/p>\n<\/td>\n<td>\n<p>Fill in the text to be displayed on the right \/ bottom lable of the object, can be directly input or selected from\u3010Font Library\u3011. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Text\u3011<\/p>\n<\/td>\n<td>\n<p>\u3010Direct Text Font\u3011<\/p>\n<p>Set the font of text.<\/p>\n<p>\u3010Direct Text Size\u3011<\/p>\n<p>Set the size of text, the default size is 20.<\/p>\n<p>\u3010Alignment\u3011<\/p>\n<p>Set the alignment of text.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the color of text.<\/p>\n<p>\u3010Format\u3011<\/p>\n<p>Set the format of text, includes Bold, Italic and Underline.<\/p>\n<p>\u3010Word Spacing\u3011<\/p>\n<p>Set the word space of text.<\/p>\n<p>\u3010Margin\u3011<\/p>\n<p>Set the margin of text.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Background\u3011<\/p>\n<\/td>\n<td>\n<p>Check whether to display background, set the color and opacity of background after checked. <\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the background color of external lable.<\/p>\n<p>\u3010Opacity\u3011<\/p>\n<p>Set the opacity of external lable background, the greater the value the more the background opacity is. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Border\u3011<\/p>\n<\/td>\n<td>\n<p>Check whether to display border. <\/p>\n<p>\u3010Color\/Width\u3011<\/p>\n<p>Set the color and width of border.<\/p>\n<p>\u3010Type\u3011<\/p>\n<p>Set the type of border.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h4>19.4.2 \u3010Switch\u3011<\/h4>\n<p>Switch allows users to perform specific operation behaviors by pressing objects, including\u3010Bit Switch\u3011,\u3010Word Switch\u3011,\u3010Change Screen\u3011and\u3010Function Switch\u3011.<\/p>\n<h5>19.4.2.1 \u3010Bit Switch\u3011<\/h5>\n<p>The\u3010Bit Switch\u3011\u3010Setting\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p> <img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-118.jpg\" \/><\/p>\n<p>Figure 265\u3010Setting\u3011Screen of\u3010Bit Switch\u3011<\/p>\n<p>Table 132\u3010Setting\u3011Properties of\u3010Bit Switch\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Preview\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Preview the appearance of this object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Name\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The default name of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Comment\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the comment of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Update\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Provide user can select a suitable speed to get the latest data under different situation, such as you would like to get the latest data or adjust the object on the screen to display first, etc.<\/p>\n<p>Provide three modes:<\/p>\n<p>\u3010once\u3011: update once only when switch to this page or use the system tag\u3010OP_UPDATE_SCREEN_OBJECTS\u3011, update once when trigger once a time, it will keep update if the monitor address is internal address.<\/p>\n<p>\u3010normal\u3011: normal update speed.<\/p>\n<p>\u3010fast\u3011: the fastest update speed.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Execute while Releasing\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Select to execute the action set for the Bit Switch while releasing. The action will be executed immediately when the switch is pressed if this option is not selected.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Individual Buzzer Setting\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Can individually setup buzzer setting.<\/p>\n<p>Includes 5 modes: Off, Short, Long, Short-Short, Long-Short.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Play Audio while Pressing\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Select to play audio when the switch is pressed; an\u3010Audio Selector\u3011will appear on the right when enabled. The switch on the right of the\u3010Audio Selector\u3011can be pressed to select an audio and the switch on the left of the\u3010Audio Selector\u3011can be pressed to play the selected audio.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Enable Multi-function\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Select to enable the Multi-function Switch. A\u3010Multi-function List\u3011will appear on the left when selected.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Multi-function List\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>This list will appear when\u3010Enable Multi-function\u3011 is selected. The\u3010Multi-function List\u3011is used to display the list of functions that will be executed when the switch is pressed. A maximum of 16 operations can be set, and the system will execute the operations in order when the switch is pressed.<\/p>\n<p>\u3010Add\u3011<\/p>\n<p>Add to the number of switches in\u3010Multi-function List\u3011. The type of switch to add can be selected.<\/p>\n<p>\u3010Delete\u3011<\/p>\n<p>Delete the switch currently selected in the\u3010Multi-function List\u3011.<\/p>\n<p>\u3010Up\u3011<\/p>\n<p>Move the order of the switch currently selected in the\u3010Multi-function List\u3011up.<\/p>\n<p>\u3010Down\u3011<\/p>\n<p>Move the order of the switch currently selected in the\u3010Multi-function List\u3011down.<\/p>\n<p>Notice:<\/p>\n<ol>\n<li>When the first and second buttons are the same switch type, it canbe moved up or down.<\/li>\n<li>An object can only include one\u3010Change Screen\u3011or\u3010Function Switch\u3011, and it must be last in the list. <\/li>\n<\/ol>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Address\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the operating address of the Bit Switch.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Monitor Address\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the switch to change its state according to the value in the monitored address. The user will be able to set the address to monitor when this option is selected.<\/p>\n<p>After checking\u3010identical to Write Address\u3011,<strong> <\/strong>the\u3010Monitor Address\u3011cannot be modified and will be the same as the write address.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Enable Extended Lamp Feature\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set to enable extra features for the bit switch object. When set, extension options will appear to the right. The original address set in the window will no longer be read and is replaced by the\u3010Addresses 0~3\u3011in the dialog as shown below. After checked, the original\u3010Type\u3011and\u3010Data Type\u3011setting value will be changed from the following figure\u3010Data Type\u3011to set.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-119.jpg\" \/><\/p>\n<p>\u3010Data Type\u3011<\/p>\n<p>Set the address type of\u3010Addresses 0~3\u3011. Data types include Bit, 16Bit-BCD, 16Bit-INT, 16Bit-UINT, 32Bit-BCD, 32Bit-INT and 32Bit-UINT.<\/p>\n<p>\u3010Number of states\u3011<\/p>\n<p>Set the number of states the bit switch will have.<\/p>\n<p>\u3010State Switch Condition\u3011<\/p>\n<p>Set how the state of the bit switch is determined. The conditions include\u3010Change State by Bit Combination\u3011,\u3010Change State by Bit\u3011, or\u3010Change State by Data\u3011.<\/p>\n<p>\u3010Change State by Bit Combination\u3011uses\u3010Addresses 0~3\u3011in combination to switch the displayed state.<\/p>\n<p>For example, the\u3010Data Type\u3011is set to Bit, the\u3010Number of states\u3011is 4,\u3010Address 0\u3011is M90,\u3010Address 1\u3011is M91,\u3010Addresses 2\u3011and\u3010Addresses 3\u3011are not set, the state will be determined as follows:<\/p>\n<p>M90 = OFF and M91 = OFF State 0<\/p>\n<p>M90 = ON and M91 = OFF State 1<\/p>\n<p>M90 = OFF and M91 = ON State 2<\/p>\n<p>M90 = ON and M91 = ON State 3, and so on.<\/p>\n<p>\u3010Change State by Bit\u3011refers to\u3010Addresses 0~3\u3011to switch the displayed state.<\/p>\n<p>For example, the\u3010Data Type\u3011is set to Bit, the\u3010Number of states\u3011is 4,\u3010Address 0\u3011is M90,\u3010Address 1\u3011is M91,\u3010Address 2\u3011is M92, and\u3010Address 3\u3011is not set, the state will be determined as follows:<\/p>\n<p>M90, M91, M92 = OFF State 0<\/p>\n<p>M90 = ON, M91 = OFF, M92 = OFF State 1<\/p>\n<p>M90 = OFF, M91 = ON, M92 = OFF State 2<\/p>\n<p>M90 = OFF, M91 = OFF, M92 = ON State 3, and so on.<\/p>\n<p>If the data type is 16Bit-UINT, the number of states is 5, \u3010Address 0\u3011is R50, the other addresses are not set, when R50 = 0 the state is 0. R50 = 1, state 1. R50 = 2, state 2. R50 = 4, state 3. R50 = 8, state 4.<\/p>\n<p>\u3010Change State by Data\u3011refers to switching the display status according to the value of\u3010Address 0\u3011. In\u3010Data Type\u3011, this option will appear for all types except Bit type.<\/p>\n<p>If the\u3010Data Type\u3011is 16Bit-Uint, the\u3010Number of states\u3011is 5,\u3010Address 0\u3011is R50, the other addresses are not set, when R40 = 0, the state is 0. R50 = 1, state 1. R50 = 2, state 2, R50 = 3, state 3, R50 = 4, state 4, and so on.<\/p>\n<p>\u3010Addresses 0~3\u3011<\/p>\n<p>Specify the address to use to determine the state of the bit switch.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Custom State Value\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>After check\u3010Custom State Value\u3011, you can click\u3010Detail\u3011at the back, set the value and range of each state.<\/p>\n<p>Setting dialog as below:<\/p>\n<p><img decoding=\"async\" alt=\"C:\\Users\\chien yu\\Desktop\\fv 1.5 pic\\custom state value.JPG\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-120.jpg\" \/><\/p>\n<p>\u3010Out of Range Display State\u3011<\/p>\n<p>Set the state when the value display out of range.<\/p>\n<p>\u3010Single Value\u3011<\/p>\n<p>Set the mode of corresponding state as single value, the following table will change after clicked, then you can set the value of each corresponding state in\u3010Value\u3011field.<\/p>\n<p>\u3010Range\u3011<\/p>\n<p>Set the mode of corresponding state as range, the following table will change after clicked, then you can set the value of each corresponding state in\u3010Lower Limit\u3011and\u3010Upper Limit\u3011field.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Action\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the operation of the Bit Switch. Setting items that will appear below varies according to the different operation selected.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Duration\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The duration of the operation when the Bit Switch is pressed. The duration time can be set on the right when this option is selected.<\/p>\n<p>For example, if the operation is set as\u3010Set Bit\u3011, and the duration is set as 1 second, when the Bit Switch is pressed the\u3010Address\u3011will change to 1 and then automatically change to 0 after 1 second.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Execute Scripts\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set to execute scripts when the Bit Switch is pressed. The ID of the script to execute can be set on the right when this option is selected.<\/p>\n<p>If the\u3010Action\u3011is set as\u3010Bit Momentary\u3011,\u3010Bit Invert\u3011or\u3010Periodic Switch\u3011, individual scripts can be set to execute when the\u3010Address\u3011is 1 or 0.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Set Bit\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The\u3010Address\u3011will change to 1 when the Bit Switch is pressed.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Reset Bit\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The\u3010Address\u3011will change to 0 when the Bit Switch is pressed.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Bit Momentary\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The\u3010Address\u3011will change to 1 when the Bit Switch is pressed, and the\u3010Address\u3011will change to 0 when the Bit Switch is released.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Bit Invert\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The current state of the\u3010Address\u3011will change from 1 to 0 or 0 to 1 according to its current state.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Comparison\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>If the numeric value of the\u3010Reference Address\u3011read by\u3010Data Type\u3011satisfies the\u3010Condition\u3011and\u3010Constant\u3011set when the Bit Switch is pressed, the\u3010Address\u3011will change to 1.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Periodic Switch\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The state of the\u3010Address\u3011will change periodically according to the\u3010Time Interval\u3011and\u3010Number of Times\u3011set for the\u3010Address\u3011when the Bit Switch is pressed.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Notify before Writing\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The signal will notify before writing.<\/p>\n<p>Level: Set the bit as 0 or 1.<\/p>\n<p>Pulse: Set the bit to 1 and automatically restore to 0 after continuing the time set by\u3010Width\u3011.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Notify after Writing\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The signal will notify after writing.<\/p>\n<p>Level: Set the bit as 0 or 1.<\/p>\n<p>Pulse: Set the bit to 1 and automatically restore to 0 after continuing the time set by\u3010Width\u3011.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.2.2  \u3010Word Switch\u3011<\/h5>\n<p>The\u3010Word Switch\u3011\u3010Setting\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p> <img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-121.jpg\" \/><\/p>\n<p>Figure 266\u3010Setting\u3011Screen of\u3010Word Switch\u3011<\/p>\n<p>Table 133\u3010Setting\u3011Properties of\u3010Word Switch\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Preview\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Previews the appearance of this object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Name\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The default name of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Comment\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the comment of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Update\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Provide user can select a suitable speed to get the latest data under different situation, such as you would like to get the latest data or adjust the object on the screen to display first, etc.<\/p>\n<p>Provide three modes:<\/p>\n<p>\u3010once\u3011: update once only when switch to this page or use the system tag\u3010OP_UPDATE_SCREEN_OBJECTS\u3011, update once when trigger once a time, it will keep update if the monitor address is internal address.<\/p>\n<p>\u3010normal\u3011: normal update speed.<\/p>\n<p>\u3010fast\u3011: the fastest update speed.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Execute while Releasing\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Select to execute the action set for the Word Switch while releasing. The action will be executed immediately when the switch is pressed if this option is not selected.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Individual Buzzer Setting\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Can individually setup buzzer setting.<\/p>\n<p>Includes 5 modes: Off, Short, Long, Short-Short, Long-Short.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Play Audio while Pressing\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Select to play audio when the switch is pressed. An\u3010Audio Selector\u3011will appear on the right when enabled. The switch on the right of the\u3010Audio Selector\u3011can be pressed to select an audio and the switch on the left of the\u3010Audio Selector\u3011can be pressed to play the selected audio.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Enable Multi-function\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Select whether to enable the Multi-function Switch. A\u3010Multi-function List\u3011will appear on the left when selected.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Multi-function List\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>This list will appear when\u3010Enable Multi-function\u3011is selected. The\u3010Multi-function List\u3011is used to display the list of functions that will be executed when the switch is pressed. A maximum of 16 operations can be set, and the system will execute the operations in order when the switch is pressed.<\/p>\n<p>\u3010Add\u3011<\/p>\n<p>Add to the number of switches in\u3010Multi-function List\u3011. The type of switch to add can be selected.<\/p>\n<p>\u3010Delete\u3011<\/p>\n<p>Delete the switch currently selected in the\u3010Multi-function List\u3011.<\/p>\n<p>\u3010Up\u3011<\/p>\n<p>Move the order of the switch currently selected in the\u3010Multi-function List\u3011up.<\/p>\n<p>\u3010Down\u3011<\/p>\n<p>Move the order of the switch currently selected in the\u3010Multi-function List\u3011down.<\/p>\n<p>Notice:<\/p>\n<ol>\n<li>When the first and second buttons are the same switch type, it canbe moved up or down.<\/li>\n<li>An object can only include one\u3010Change Screen\u3011or\u3010Function Switch\u3011, and it must be last in the list.<\/li>\n<\/ol>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Address\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the operating address of the Word Switch.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Monitor Address\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the switch to change its state according to the value in the monitored address. The user will be able to set the address to monitor when this option is selected.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Data Type\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the data type of the Word Switch.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Action\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the operate action of word switch, following will show different options according different action.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Write Data\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>When pressing word switch, the\u3010Constant\u3011will be write into \u3010Write Address\u3011according to its\u3010Data Type\u3011.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Add Data\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>This function increases the value of\u3010Write Address\u3011by the value of\u3010Constant\u3011every time you press the word switch.<\/p>\n<p>\u3010Constant\u3011<\/p>\n<p>Set the value to increase each time when pressing the switch.<\/p>\n<p>\u3010Max\u3011<\/p>\n<p>Set the maximum value of this address.<\/p>\n<p>For example: set 10, if the original value of this address is 50, it will become 10 after pressing this button.<\/p>\n<p>Check\u3010Address\u3011to dynamically control the maximum value.<\/p>\n<p>\u3010Continuously Add\u3011<\/p>\n<p>If check this option, when pressing the word switch and unrelease, word switch will excute\u3010Add Data\u3011continuously, and after wait for\u3010Time Delay\u3011will excute\u3010Add Data\u3011according to\u3010Interval\u3011time.<\/p>\n<p>\u3010Cyclically Add\u3011<\/p>\n<p>If check this option, when the value has add to\u3010Max\u3011, press this word switch then will write\u3010Min\u3011to\u3010Address\u3011.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Subtract Data\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>This function reduces the value of\u3010Write Address\u3011to the value of\u3010Constant\u3011every time you press the word group button.<\/p>\n<p>\u3010Constant\u3011<\/p>\n<p>Set the value to decrease each time when pressing the switch.<\/p>\n<p>\u3010Min\u3011<\/p>\n<p>Set the minimum value of this address.<\/p>\n<p>For example: set 10, if the original value of this address is 0, it will become 10 after pressing this button<\/p>\n<p>Check\u3010Address\u3011to dynamically control the minimum value.<\/p>\n<p>\u3010Continuously Subtract\u3011<\/p>\n<p>If check this option, when pressing the word switch and unrelease, word switch will excute\u3010Subtract Data\u3011continuously, and after wait for\u3010Time Delay\u3011will excute\u3010Subtract Data\u3011according to\u3010Interval\u3011time.<\/p>\n<p>\u3010Cyclically Subtract\u3011<\/p>\n<p>If check this option, when the value has subtract to\u3010Min\u3011, press this word switch then will write\u3010Max\u3011to\u3010Address\u3011.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Numeric Input\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>When this button is pressed, the keyboard will pop up, allowing the user to set the value to\u3010Write Address\u3011.<\/p>\n<p>The setting method is the same as in chapter 19.4.3.1-\u3010Setting\u3011.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Enable Extended Lamp Feature\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set to enable extra features for the bit switch object. When set, extension options will appear to the right. The original address set in the window will no longer be read and is replaced by the\u3010Addresses 0~3\u3011in the dialog as shown below. After checked, the original\u3010Type\u3011and\u3010Data Type\u3011setting value will be changed from the following figure\u3010Data Type\u3011to set.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-122.jpg\" \/><\/p>\n<p>\u3010Data Type\u3011<\/p>\n<p>Set the address type of\u3010Addresses 0~3\u3011. Data types include Bit, 16Bit-BCD, 16Bit-INT, 16Bit-UINT, 32Bit-BCD, 32Bit-INT and 32Bit-UINT.<\/p>\n<p>\u3010Number of states\u3011<\/p>\n<p>Set the number of states the bit switch will have.<\/p>\n<p>\u3010State Switch Condition\u3011<\/p>\n<p>Set how the state of the bit switch is determined. The conditions include\u3010Change State by Bit Combination\u3011,\u3010Change State by Bit\u3011, or\u3010Change State by Data\u3011.<\/p>\n<p>\u3010Change State by Bit Combination\u3011uses\u3010Addresses 0~3\u3011in combination to switch the displayed state.<\/p>\n<p>For example, the\u3010Data Type\u3011is set to Bit, the\u3010Number of states\u3011is 4,\u3010Address 0\u3011is M90,\u3010Address 1\u3011is M91,\u3010Addresses 2\u3011and\u3010Addresses 3\u3011are not set, the state will be determined as follows:<\/p>\n<p>M90 = OFF and M91 = OFF State 0<\/p>\n<p>M90 = ON and M91 = OFF State 1<\/p>\n<p>M90 = OFF and M91 = ON State 2<\/p>\n<p>M90 = ON and M91 = ON State 3, and so on.<\/p>\n<p>\u3010Change State by Bit\u3011refers to\u3010Addresses 0~3\u3011to switch the displayed state.<\/p>\n<p>For example, the\u3010Data Type\u3011is set to Bit, the\u3010Number of states\u3011is 4,\u3010Address 0\u3011is M90,\u3010Address 1\u3011is M91,\u3010Address 2\u3011is M92, and\u3010Address 3\u3011is not set, the state will be determined as follows:<\/p>\n<p>M90, M91, M92 = OFF State 0<\/p>\n<p>M90 = ON, M91 = OFF, M92 = OFF State 1<\/p>\n<p>M90 = OFF, M91 = ON, M92 = OFF State 2<\/p>\n<p>M90 = OFF, M91 = OFF, M92 = ON State 3, and so on.<\/p>\n<p>If the data type is 16Bit-UINT, the number of states is 5, \u3010Address 0\u3011is R50, the other addresses are not set, when R50 = 0 the state is 0. R50 = 1, state 1. R50 = 2, state 2. R50 = 4, state 3. R50 = 8, state 4.<\/p>\n<p>\u3010Change State by Data\u3011refers to switching the display status according to the value of\u3010Address 0\u3011. In\u3010Data Type\u3011, this option will appear for all types except Bit type.<\/p>\n<p>If the\u3010Data Type\u3011is 16Bit-Uint, the\u3010Number of states\u3011is 5,\u3010Address 0\u3011is R50, the other addresses are not set, when R40 = 0, the state is 0. R50 = 1, state 1. R50 = 2, state 2, R50 = 3, state 3, R50 = 4, state 4, and so on.<\/p>\n<p>\u3010Addresses 0~3\u3011<\/p>\n<p>Specify the address to use to determine the state of the bit switch.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Custom State Value\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>After check\u3010Custom State Value\u3011, you can click\u3010Detail\u3011at the back, set the value and range of each state.<\/p>\n<p>Setting dialog as below:<\/p>\n<p><img decoding=\"async\" alt=\"C:\\Users\\chien yu\\Desktop\\fv 1.5 pic\\custom state value.JPG\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-123.jpg\" \/><\/p>\n<p>\u3010Out of Range Display State\u3011<\/p>\n<p>Set the state when the value display out of range.<\/p>\n<p>\u3010Single Value\u3011<\/p>\n<p>Set the mode of corresponding state as single value, the following table will change after clicked, then you can set the value of each corresponding state in\u3010Value\u3011field.<\/p>\n<p>\u3010Range\u3011<\/p>\n<p>Set the mode of corresponding state as range, the following table will change after clicked, then you can set the value of each corresponding state in\u3010Lower Limit\u3011and\u3010Upper Limit\u3011field.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010State\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the number of states, set whether the word switch changes its status according to the value of the set monitor address.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Notify before Writing\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The signal will notify before writing.<\/p>\n<p>Level: Set the bit as 0 or 1.<\/p>\n<p>Pulse: Set the bit to 1 and automatically restore to 0 after continuing the time set by\u3010Width\u3011.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Notify after Writing\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The signal will notify after writing.<\/p>\n<p>Level: Set the bit as 0 or 1.<\/p>\n<p>Pulse: Set the bit to 1 and automatically restore to 0 after continuing the time set by\u3010Width\u3011.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5><\/h5>\n<h5>19.4.2.3 \u3010Change Screen\u3011<\/h5>\n<p>The\u3010Change Screen\u3011\u3010Setting\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p> <img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-124.jpg\" \/><\/p>\n<p>Figure 267\u3010Setting\u3011Screen of\u3010Change Screen\u3011<\/p>\n<p>Table 134\u3010Setting\u3011Properties of\u3010Change Screen\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Preview\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Previews the appearance of this object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Name\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The default name of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Comment\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the comment of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Execute while Releasing\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Select to execute the action set for Change Screen while releasing; the action will be executing immediately when the switch is pressed if this option is not selected.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Individual Buzzer Setting\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Can individually setup buzzer setting.<\/p>\n<p>Includes 5 modes: Off, Short, Long, Short-Short, Long-Short.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Play Audio while Pressing\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Select to play audio when the switch is pressed; an\u3010Audio Selector\u3011will appear on the right when enabled. The switch on the right of the\u3010Audio Selector\u3011can be pressed to select an audio and the switch on the left of the\u3010Audio Selector\u3011can be pressed to play the audio selected.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Enable Multi-function\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Select whether to enable the Multi-function Switch. A\u3010Multi-function List\u3011will appear on the left when selected.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Multi-function List\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>This list will appear when\u3010Enable Multi-function\u3011is selected. The\u3010Multi-function List\u3011is used to display the list of functions that will be executed when the switch is pressed. A maximum of 16 operations can be set, and the system will execute the operations in order when the switch is pressed.<\/p>\n<p>\u3010Add\u3011<\/p>\n<p>Add to the number of switches in\u3010Multi-function List\u3011. The type of switch to add can be selected.<\/p>\n<p>\u3010Delete\u3011<\/p>\n<p>Delete the switch currently selected in the\u3010Multi-function List\u3011.<\/p>\n<p>\u3010Up\u3011<\/p>\n<p>Move the order of the switch currently selected in the\u3010Multi-function List\u3011up.<\/p>\n<p>\u3010Down\u3011<\/p>\n<p>Move the order of the switch currently selected in the\u3010Multi-function List\u3011down.<\/p>\n<p>Notice:<\/p>\n<ol>\n<li>When the first and second buttons are the same switch type, it canbe moved up or down.<\/li>\n<li>An object can only include one\u3010Change Screen\u3011or\u3010Function Switch\u3011, and it must be last in the list.<\/li>\n<\/ol>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Type\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the operation type of Change Screen; setting items that will appear below varies according to the different operation selected.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Screen Change\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The displayed screen of the human machine interface will change to the screen set in\u3010Screen\u3011when Change Screen is pressed.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Previous Screen\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The displayed screen of the human machine interface will change to the previous screen displayed when Change Screen is pressed.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Pop-up Window Screen\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>When the button is pressed, the HMI display will pop up the selected window screen.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Close Pop-up Window Screen\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>When the button is pressed, the pop-up window screen containing the button will close.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Close Pop-up Window Screen and Switch Screen\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>When the button is pressed, the pop-up window screen containing the button will close and the screen set to switch will appear.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Change User Level\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>When the button is pressed, security level of the user will be changed to the selected value.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Indicate Screen Already Opened\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>If the screen ID is the same as the button&#8217;s setting then the color of the word and background will turn into the complementary color.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Change to the Screen\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>When the type of the\u3010Change Screen\u3011are: Screen Change, Pop-up Window Screen, Close Pop-up Window Screen, Close Pop-up Window Screen and Screen Change. Right-click the object will show this option.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-125.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Notify before Writing\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The signal will notify before writing.<\/p>\n<p>Level: Set the bit as 0 or 1.<\/p>\n<p>Pulse: Set the bit to 1 and automatically restore to 0 after continuing the time set by\u3010Width\u3011.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Notify after Writing\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The signal will notify after writing.<\/p>\n<p>Level: Set the bit as 0 or 1.<\/p>\n<p>Pulse: Set the bit to 1 and automatically restore to 0 after continuing the time set by\u3010Width\u3011.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.2.4 \u3010Function Switch\u3011<\/h5>\n<p>The\u3010Function Switch\u3011\u3010Setting\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p> <img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-126.png\" \/><\/p>\n<p>Figure 268\u3010Setting\u3011Screen of\u3010Function Switch\u3011<\/p>\n<p>Table 135\u3010Setting\u3011Properties of\u3010Function Switch\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Preview\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Previews the appearance of this object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Name\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The default name of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Comment\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the comment of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Execute while Releasing\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Select to execute the action set for the Function Switch while releasing. The action will be executed immediately when the switch is pressed if this option is not selected.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Play Audio while Pressing\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Select to play audio when the switch is pressed; an\u3010Audio Selector\u3011will appear on the right when enabled. The switch on the right of the\u3010Audio Selector\u3011can be pressed to select an audio and the switch on the left of the\u3010Audio Selector\u3011can be pressed to play the audio selected.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Enable Multi-function\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Select whether to enable the Multi-function Switch. A\u3010Multi-function List\u3011will appear on the left when selected.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Multi-function List\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>This list will appear when\u3010Enable Multi-function\u3011is selected. The\u3010Multi-function List\u3011is used to display the list of functions that will be executed when the switch is pressed. A maximum of 16 operations can be set, and the system will execute the operations in order when the switch is pressed.<\/p>\n<p>\u3010Add\u3011<\/p>\n<p>Add to the number of switches in\u3010Multi-function List\u3011. The type of switch to add can be selected.<\/p>\n<p>\u3010Delete\u3011<\/p>\n<p>Delete the switch currently selected in the\u3010Multi-function List\u3011.<\/p>\n<p>\u3010Up\u3011<\/p>\n<p>Move the order of the switch currently selected in the\u3010Multi-function List\u3011up.<\/p>\n<p>\u3010Down\u3011<\/p>\n<p>Move the order of the switch currently selected in the\u3010Multi-function List\u3011down.<\/p>\n<p>Notice:<\/p>\n<ol>\n<li>When the first and second buttons are the same switch type, it canbe moved up or down.<\/li>\n<li>An object can only include one\u3010Change Screen\u3011or\u3010Function Switch\u3011, and it must be last in the list.<\/li>\n<\/ol>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Function\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the operation function of the Function Switch. Setting items that will appear below varies according to the different functions selected.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010System: Restart HMI\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The human machine interface will restart when the Function Switch is pressed.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010System: Increase Brightness\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The brightness of the human machine interface display will increase when the Function Switch is pressed.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010System: Decrease Brightness\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The brightness of the human machine interface display will decrease when the Function Switch is pressed.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010System: Turn Backlight OFF\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The brightness of the human machine interface display will decrease to the lowest brightness level when the Function Switch is pressed.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010System: Show System Configuration\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The system will pop-up system configuration when Function Switch is pressed, including four paging\u3010General\u3011,\u3010Ethernet\u3011,\u3010Screen Saver\u3011and\u3010Date\/Time\u3011,user can select items to be displayed.<\/p>\n<p>\u3010General\u3011paging including device name, station number, OS Version, Firmware Version.<\/p>\n<p>\u3010Ethernet\u3011paging set whether to enable ethernet, whether to use DHCP, display or set HMI IP Address, display or set HMI Netmask, display , DNS setting or set HMI Gateway.<\/p>\n<p>\u3010Screen Saver\u3011paging set whether to enable screen saver, waiting time.<\/p>\n<p>\u3010Date\/Time\u3011paging display or set HMI date and time.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010System: Show Link Setting\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The HMI will show the link setting configuration and users can also adjust the settings as well.<\/p>\n<p><strong>Note: the interface type can not be changed.<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010FvRT: Restart Project\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Restart the project.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010FvRT: Stop FvRT\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>After stopping the FvRT setting, there are four ways to select as below. <\/p>\n<p>\u3010Following FvRT setting\u3011Perform the according to the seeting of \u2018After stopping the project\u2019 in FvRT settings.<\/p>\n<p>\u3010Return to startup screen\u3011Press the button to end up the project then return to the FvRT startup interface.<\/p>\n<p>\u3010Close the program\u3011Press the button to end up the project and close the FvRT program.<\/p>\n<p>\u3010Shutdown the machine\u3011Press the button to end up the project and close the PC.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010FvRT: Open File\/Url\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>When the function button is pressed, other software in the computer will be executed according to the preset path, and the path of the file to be opened can also be dynamically modified through the register. <\/p>\n<p>Open the file filling example: C:\\Users\\user\\Downloads\\modscan64\\ModScan64.exe<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-127.png\" \/><\/p>\n<p>Open the webpage filling example: https:\/\/www.google.com\/<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-128.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010FvRT: Print Alarm Data\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-129.png\" \/><\/p>\n<p>\u3010Alarm Group Setting\u3011<\/p>\n<p> \u3010Group ID\u3011Select the group to print, the alarm group must set the export data and choose .csv format.<\/p>\n<p> \u3010Print Mode\u3011Support History and File modes.<\/p>\n<p>\u3010History\u3011When Enable Time Filter is not checked, will print all messages.<\/p>\n<p>          When Enable Time Filter is checked, the selected range of messages will be printed.<\/p>\n<p>\u3010File\u3011Select the csv file to print.<\/p>\n<p>\u3010Printer Setting\u3011<\/p>\n<p>  \u3010Name\u3011Select the printer.<\/p>\n<p>  \u3010Paper Size\u3011Select the print size.<\/p>\n<p>  \u3010Orientation\u3011Select the print orientation.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Security: Log in\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The system will display the log in window for the operator to log in when Function Switch is pressed.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Security: Log Out\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The operator will be logged out when Function Switch is pressed.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Security: Password Manager\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The password table will be displayed for the operator to view. For example, if the security level of the operator is 5, the level 5 password table will appear. For more details refer to <strong>Chapter 5 -Security.<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Security: Import User Accounts\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Update the username and user passwords, or passwords only, it depends on the setting in \u3010Security\u3011.<\/p>\n<p>\u3010Overwrite\u3011<\/p>\n<p>If\u3010Overwrite\u3011is selected, the usernames and user passwords currently saved on the human machine interface will be overwritten. If it is not selected, the new username and user password will be added to the human machine interface.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Script: Execute Script\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The system will execute the selected\u3010Script\u3011when Function Switch is pressed.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Recipe: Import Recipe Group from File\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Import the file contents of the recipe group; user will be able to see the complete contents of the recipe group if recipe tables are available. Users will also be able to see the changes in the numeric value of the displayed components if the register addresses of the displayed components are the same as the current recipe address set in the recipe. A drop-down list will appear below when this function is used for the user to decide which recipe group will be used.<\/p>\n<p>\u3010Recipe Group\u3011<\/p>\n<p>The recipe group ID and recipe group name can be seen here if the user adds new recipe groups with the recipe setting function.<\/p>\n<p><strong>Note: the index of this recipe group will become 0 when this function is used, so the current recipe collection will have an index value of 0.<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Recipe: Export Recipe Group back to File\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Export the contents of the recipe group into a recipe group file. The user can choose to export a new file or overwrite the original recipe group file. A drop-down list will appear below when this function is used for the user to decide which recipe group will be used.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Recipe: Write Current Recipe to Target Address\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>A drop-down list will appear below when this function is used for the user to decide which recipe group will be used. The contents of the parameter in the HMI current recipe will be written to the register of the target address according to the setting of this recipe group.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Recipe: Read From Target Address to Current Recipe\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>A drop-down list will appear below when this function is used for the user to decide which recipe group will be used. The register contents of the target address will be read and the value will be written to the current recipe of the HMI according to the setting of this recipe group.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Recipe: Add Default Recipe\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Add a set of recipes in recipe table to above or below the current recipe and switch current recipeto the new recipe.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Recipe: Copy Current Recipe\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Copy current recipe in recipe table to above or below the current recipe and switch current recipeto the new recipe.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Recipe: Delete Current  Recipe\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Delete the current recipe and switch current recipe to next recipe.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Recipe: Transfer Source Address to Recipe Group\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Read the parameter data from source address and write to the recipe group storage space, source address can be set in the advanced paging of the recipe, the function switch transfer all recipe group data.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Recipe: Transfer Recipe Group to Source Address\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Write the parameter data of the recipe group storage space to source address, source address can be set in the advanced paging of the recipe, the function switch transfer all recipe group data.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Recipe: Import Recipe Group from File, then Transfer to Source Address\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>After import the contents of the recipe group file to recipe group stprage space and write the parameter data of the recipe group storage space to source address, source address can be set in the advanced paging of the recipe, the function switch transfer all recipe group data.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Recipe: Transfer Source Address to Recipe Group,then Export to File\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>After read the parameter data from source address and write to the recipe group storage space, then export the contents of the recipe group storage space, source address can be set in the advanced paging of the recipe, the function switch transfer all recipe group data.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010File Manager: Transfer File from HMI to USB Storage\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Transfer the files from HMI internal storage to USB storage.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010File Manager: Transfer File from HMI to microSD Card\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Transfer the files from HMI internal storage to microSD card.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Switch to VGA Input Terminal\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>When the function switch is pressed, the display signal switches to the VGA input.<\/p>\n<p>Currently, the P5070VS and P5102VS models are supported. <\/p>\n<p>\u3010Long Press VGA Return Time (s)\u3011<\/p>\n<p>Set the long press time it takes for the screen to return from the VGA display.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Printer: Print Screen\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>When the function switch is pressed, the current screen will be printed to the specified location.<\/p>\n<p>\u3010Save To\u3011allows the user to specify the location to save the screenshot. The available options are internal, USB, SD, or printer.<\/p>\n<p>\u3010Format\u3011allows the user to change the type of file the screenshot is. The available options are PNG or JPG.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Printer: Abort Print Job\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>When the function switch is pressed, the current print job will be stopped.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010FTP: Connect to FTP\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>When the function switch is pressed, the setting window will appear, users can set the HMI to remote, press<img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-130.png\" \/>to do the remote control.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-131.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Wi-Fi: Show Wifi Configuration\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>When the function switch is pressed, the setting window will appear.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-132.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010PLC: Show Ladder Viewer\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>When the function switch is pressed, HMI interface will show\u3010Select Device\u3011dialog, after selected the device, press\u3010OK\u3011button, then it will excute read and display FATEK PLC program of the link device.<\/p>\n<p>For more detail please refer <strong>ch27-PLC Integration<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010PLC: Update FATEK PLC Project From HMI or USB Flash Drive\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>When the function switch is pressed, HMI UI will show\u3010Select Update File\u3011dialog, after selected the file, will show\u3010Select link Device\u3011dialog, then press\u3010OK\u3011button, if you have set the password will show up\u3010Enter Password\u3011dialog first , and enter password to excute FATEK PLC program update.<\/p>\n<p>For more detail please refer<strong> ch27-PLC Integration<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010PLC: Show Ethernet Module Configuration\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>When the function switch is pressed, HMI UI will scan the dialog list of the ethernet module of FATEK PLC on the internet, after choose, press\u3010Properties\u3011button, will show the dialog of the module property, provide view and modify, same as the use of \u3010Fatek Ethernet Module Configuration tool\u3011dialog.<\/p>\n<p>For more detail please refer <strong>ch27-PLC Integration<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010PLC: Run PLC\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>When this function button is pressed, FATEK PLC can be put into Run state.<\/p>\n<p>For more detail please refer<strong> ch27.5-Control PLC run\/stop from HMI.<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010PLC: Stop PLC\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>When this function button is pressed, FATEK PLC can be put into stop state.<\/p>\n<p>For more detail please refer<strong> ch27.5-Control PLC run\/stop from HMI.<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Safe Removal: Remove USB Storage\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>When the function switch is pressed, HMI UI will check whether insert the USB Drive, if yes will show\u3010Device Removal\u3011dialog, figure show as below, press\u3010Ok\u3011button, will show a successful message as shown below.<\/p>\n<p><img decoding=\"async\" alt=\"C:\\Users\\chien yu\\Desktop\\Fv manual\\IMG_2046.jpg\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-133.jpg\" \/> <img decoding=\"async\" alt=\"C:\\Users\\chien yu\\Desktop\\Fv manual\\IMG_2047.jpg\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-134.jpg\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Safe Removal: Remove microSD Card\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>When the function switch is pressed, HMI UI will check whether insert the MicroSD card, if yes will show\u3010Device Removal\u3011dialog, figure show as below, press\u3010Ok\u3011button, will show a successful message as shown below.<\/p>\n<p><img decoding=\"async\" alt=\"C:\\Users\\chien yu\\Desktop\\Fv manual\\IMG_2048.jpg\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-135.jpg\" \/> <img decoding=\"async\" alt=\"C:\\Users\\chien yu\\Desktop\\Fv manual\\IMG_2049.jpg\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-136.jpg\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Installment: Enter Installment Password\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>When the function switch is pressed, HMI UI will show\u3010Installment Password Enter\u3011dialog, figure as shown below.<\/p>\n<p>If you have entered the last password or super user password, it won\u2019t show this dialog when press the function switch.<\/p>\n<p><img decoding=\"async\" alt=\"C:\\Users\\chien yu\\Desktop\\Fv manual\\46.JPG\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-137.jpg\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Installment: Modify Installment\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>When the function switch is pressed, HMI will pop-up modify dialog, figure shown as below.<\/p>\n<p>For static mode:<\/p>\n<p>The dialog can modify\u3010Total Period\u3011,\u3010Super User\u3011password, next period deadline and password, etc.<\/p>\n<p>If you have entered the last password or super user password, it won\u2019t show this dialog when press the function switch.<\/p>\n<p><img decoding=\"async\" alt=\"C:\\Users\\chien yu\\Desktop\\Fv manual\\47.JPG\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-138.jpg\" \/><\/p>\n<p>For dynamic mode:<\/p>\n<p>You can change the project key.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-139.jpg\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Screen Lock: Operation Lock(Lock)\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>When the function switch is pressed, if the multi-link of the current HMI has open the\u3010Operation Lock\u3011function, then other multi-link HMI will go into screen lock status, that is, other multi-link HMI cannot operate, and other multi-link HMI will show\u3010Operation Lock\u3011figure in the upper left corner, figure as shown below, remide operator the HMI has already in the operation lock status.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-140.jpg\" \/><\/p>\n<p>\u3010Do Not Automatically Unlock\u3011<\/p>\n<p>If check the\u3010Do Not Automatically Unlock\u3011function, only press\u3010Screen Lock: Operation Lock(Unlock)\u3011or\u3010Screen Lock: Operation Lock(Lock &amp; Unlock)\u3011can unlock other multi-link HMI.<\/p>\n<p>For more detail please refer<strong> ch29-Multi-Link<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Screen Lock: Operation Lock(Unlock)\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>When the function switch is pressed, if the multi-link of the current HMI has open the\u3010Operation Lock\u3011function, then other multi-link HMI will go into screen unlock status, and other multi-link HMI will show\u3010Operation Lock\u3011figure in the upper left corner will disappear.<\/p>\n<p>For more detail please refer <strong>ch29-Multi-Link<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Screen Lock: Operation Lock(Lock &amp; Unlock)\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>When the function switch is pressed, if the multi-link of the current HMI has open the\u3010Operation Lock\u3011function, then other multi-link HMI will go into lock or unlock screen status according to the status of the current HMI.<\/p>\n<p>For more detail please refer <strong>ch29-Multi-Link<\/strong> <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Update: Project Update\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>When this function button is pressed, a dialog window for selecting the project update will be displayed. You can select the .uferp file stored in the HMI, SD card, or USB flash drive, which is a USB update file created using the software. After selection, you can update the current HMI project.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Upload: Project Upload\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>When this function button is pressed, a dialog window for selecting the project update is displayed. You can choose to store it in the HMI, SD card, or USB flash drive. The uploaded .cfrp file needs to be decompiled to see the project content.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010SMTP: Modify Sender Information\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Modify sender\u2019s SMTP Setting, Sender Information, Contact List, Import and Export.<\/p>\n<p><img decoding=\"async\" alt=\"C:\\Users\\chien yu\\Desktop\\modify sender indormation.JPG\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-141.jpg\" \/><\/p>\n<p>For more detail please refer <strong>ch4.3-\u3010SMTP\u3011<\/strong><\/p>\n<p><strong>Note:<\/strong> <strong>Due to security considerations during export, the password will not be exported.<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010SMTP: Modify Contact Lists\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Add or remove contacts, etc.<\/p>\n<p><img decoding=\"async\" alt=\"C:\\Users\\chien yu\\Desktop\\modify contact lists.JPG\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-142.jpg\" \/><\/p>\n<p>For more detail please refer <strong>ch4.3-\u3010SMTP\u3011<\/strong><\/p>\n<p><strong>Note: Press this button when the HMI is executing a project, it does not support adding a group or changing the group name.<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010<strong>PDF: Show PDF Viewer<\/strong>\u3011<\/p>\n<\/td>\n<td>\n<p>Open PDF Viewer<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Filename Extractor\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-143.png\" \/><\/p>\n<p>This function is applied by pressing the button and the file selection window will appear.<\/p>\n<p>After selecting the file, the file name will be recorded to the specified destination address in Ascii format.<\/p>\n<p>The length can be set from 1 to 100<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010<strong>Memory: Export XNV Backup<\/strong>\u3011<\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-144.png\" \/><\/p>\n<p>If user choose\u3010Manual\u3011, it will pop up a window to let users choose the project to open and check asks for the path and file name to be saved.<\/p>\n<p>If user choose\u3010Auto\u3011, It will follow the settings of\u3010Save To\u3011and\u3010File name prefix\u3011generate files at the destination.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010<strong>Memory: Inport XNV Backup<\/strong>\u3011<\/p>\n<\/td>\n<td>\n<p>it will pop up a window to let users choose the file to be inported. Human machine interface will restart after the import is successful.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010<strong>RFID Security: Read Mode<\/strong>\u3011<\/p>\n<\/td>\n<td>\n<p>Switch the mode of the\u3010RFID card reader\u3011function to Read Mode.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010<strong>RFID Security: Register Mode<\/strong>\u3011<\/p>\n<\/td>\n<td>\n<p>Switch the mode of the\u3010RFID card reader\u3011function to Register Mode.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010<strong>RFID Security: Remove Mode<\/strong>\u3011<\/p>\n<\/td>\n<td>\n<p>Switch the mode of the\u3010RFID card reader\u3011function to Remove Mode.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010<strong>RFID Security: Edit Mode<\/strong>\u3011<\/p>\n<\/td>\n<td>\n<p>Switch the mode of the\u3010RFID card reader\u3011function to Edit Mode.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010<strong>RFID Security: Cardless Operation<\/strong>\u3011<\/p>\n<\/td>\n<td>\n<p>Manage card status using the system configuration interface, and note that you can only operate on users with a lower \u3010Security Level\u3011than yours.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010<strong>RFID Security: Import User List<\/strong>\u3011<\/p>\n<\/td>\n<td>\n<p>Import RFID user lists from other HMIs, with the file extension &quot;.rfid_ulst&quot;. Before importing, the file&#8217;s correctness will be checked, and if it fails, an error window will pop up; After importing, all existing user-card binding data will be cleared, and the card numbers will be bound to corresponding users according to the file content. If the corresponding user does not exist, the card number record will be canceled.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010<strong>RFID Security: Export User List<\/strong>\u3011<\/p>\n<\/td>\n<td>\n<p>Export the bound card numbers and corresponding user data with the file extension &quot;.rfid_ulst&quot;.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010<strong>Data Transfer Ile: Select File<\/strong>\u3011<\/p>\n<\/td>\n<td>\n<p>When the data file transfer function is enabled, you can use this button to select the file to import.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Notify before Writing\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The signal will notify before writing.<\/p>\n<p>Level: Set the bit as 0 or 1.<\/p>\n<p>Pulse: Set the bit to 1 and automatically restore to 0 after continuing the time set by\u3010Width\u3011.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Notify after Writing\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The signal will notify after writing.<\/p>\n<p>Level: Set the bit as 0 or 1.<\/p>\n<p>Pulse: Set the bit to 1 and automatically restore to 0 after continuing the time set by\u3010Width\u3011.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.2.5 \u3010Display\u3011<\/h5>\n<p>The\u3010Switch\u3011\u3010Display\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p> <img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-145.png\" \/><\/p>\n<p>Figure 269\u3010Display\u3011Setting Screen of\u3010Switch\u3011<\/p>\n<p>Table 136\u3010Display\u3011Setting Properties of\u3010Switch\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Set All the States to State 0\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>If it\u2019s\u3010Change Screen Switch\u3011, there will appear a option as\u3010Set All the States to State 0\u3011, will set all the switch as state 0.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010State\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Select the state needed to be edited. 0 and 1 buttons are provided to enable quick switching between states 0 and 1.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Text\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Direct Text Font\u3011<\/p>\n<p>Set the font of the text displayed for the current editing state.<\/p>\n<p>\u3010Direct Text Size\u3011<\/p>\n<p>Set the size of the text displayed for the current editing state.<\/p>\n<p>\u3010Position\u3011<\/p>\n<p>Set the position of the text displayed for the current editing state.<\/p>\n<p>\u3010Blink\u3011<\/p>\n<p>Set the blinking function for the text of the current editing state. There are four blinking speeds available to choose from: None, Slow, Medium and Fast.<\/p>\n<p>\u3010Scrolling Text\u3011<\/p>\n<p>Set the scrolling text function for the text of the current editing state; There are four scrolling speeds available to choose from slow to fast.<\/p>\n<p>\u3010Format\u3011<\/p>\n<p>Set the format of the text displayed for the current editing state, including Bold, Italics and Underline.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the color of the text displayed for the current editing state.<\/p>\n<p>\u3010Copy Attributes to All States\u3011<\/p>\n<p>The text properties for the current editing state is applied to all states.<\/p>\n<p>\u3010Content (Direct Text)\u3011<\/p>\n<p>Set the displayed text of the currently editing state; it can be inputted directly or acquired from the\u3010Text Library\u3011.<\/p>\n<p>\u3010Copy to All States\u3011<\/p>\n<p>Apply the settings of the text for the current editing state to all states.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Background\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Background\u3011<\/p>\n<p>Check whether to enable background<\/p>\n<p>\u3010Image\u3011<\/p>\n<p>Check whether to use image<\/p>\n<p>\u3010Source\u3011<\/p>\n<p>Set whether to use an image for the displayed background of the current editing state. When this option is checked, an\u3010Image Selector\u3011will appear asking the user to select an image either from the\u3010Image Library\u3011or from\u3010File\u3011.<\/p>\n<p>\u3010Size\u3011<\/p>\n<p>You can set the picture to use \u3010Original Size\u3011, or check \u3010Fixed Ratio\u3011 to maintain a fixed length and width ratio when stretching<\/p>\n<p>\u3010Rotate\u3011<\/p>\n<p>Set image rotation angle<\/p>\n<p>\u3010Flip\u3011<\/p>\n<p>Set the flip direction of the image, includes No Flip, X-Axis and Y-Axis.<\/p>\n<p>\u3010Tone Type\u3011<\/p>\n<p>You can choose the tone type you want to change. After selecting the type, you can choose the color from\u3010Tone Color\u3011.<\/p>\n<p>\u3010Remove Background\u3011<\/p>\n<p>You can set the color to be transparent by\u3010Choose Color\u3011.<\/p>\n<p>\u3010Background\u3011<\/p>\n<p>Check whether to enable the background. After checking, you can set the background color displayed in the current editing state from\u3010Color\u3011.<\/p>\n<p>\u3010Animation\u3011<\/p>\n<p>Check whether to enable animated effects. <\/p>\n<p>\u3010Mode\u3011Choose whether to use static or dynamic control elements to flicker.<\/p>\n<p>\u3010Blink\u3011Select the blinking mode, and use the numerical value to switch during dynamic control.<\/p>\n<p>\u3010Pressing Effect\u3011<\/p>\n<p>Set the pressing effect of the current editing state. There are two effects available for selection: None and Highlight.<\/p>\n<p>\u3010Copy to All States\u3011<\/p>\n<p>Apply the settings of the background for the currently editing state to all states.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Border\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the border of the object, set the appearance after checked.<\/p>\n<p>\u3010Color\/Width\u3011<\/p>\n<p>Set the color and width of the border.<\/p>\n<p>\u3010Type\u3011 <\/p>\n<p>Set the type of the boder, click <img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-146.png\" \/> for more types.<\/p>\n<p>\u3010Copy to All States\u3011<\/p>\n<p>Apply the settings of the border for the currently editing state to all states.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.2.6 \u3010External Lable\u3011<\/h5>\n<p>The\u3010Switch\u3011\u3010External Lable\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-147.png\" \/><\/p>\n<p>Figure 270\u3010External Lable\u3011Setting Screen of\u3010Switch\u3011<\/p>\n<p>Table 137\u3010Switch\u3011\u3010External Lable\u3011setting properties<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Option<\/p>\n<\/td>\n<td>\n<p>Description<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Enable External Lable\u3011<\/p>\n<\/td>\n<td>\n<p>Checked, the bottom will appear the external lable settings of the object. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Direction\u3011<\/p>\n<\/td>\n<td>\n<p>Set the display direction, there are horizontal and vertical two selections.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Space\u3011<\/p>\n<\/td>\n<td>\n<p>Set the space between external lable and the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Left\/Top Lable(Direct Text)\u3011<\/p>\n<\/td>\n<td>\n<p>Fill in the text to be displayed on the left \/ top lable of the object, can be directly input or selected from\u3010Font Library\u3011. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Right\/Bottom Lable(Direct Text)\u3011<\/p>\n<\/td>\n<td>\n<p>Fill in the text to be displayed on the right \/ bottom lable of the object, can be directly input or selected from\u3010Font Library\u3011. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Text\u3011<\/p>\n<\/td>\n<td>\n<p>\u3010Direct Text Font\u3011<\/p>\n<p>Set the font of text.<\/p>\n<p>\u3010Direct Text Size\u3011<\/p>\n<p>Set the size of text, the default size is 20.<\/p>\n<p>\u3010Alignment\u3011<\/p>\n<p>Set the alignment of text.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the color of text.<\/p>\n<p>\u3010Format\u3011<\/p>\n<p>Set the format of text, includes Bold, Italic and Underline.<\/p>\n<p>\u3010Word Spacing\u3011<\/p>\n<p>Set the word space of text.<\/p>\n<p>\u3010Margin\u3011<\/p>\n<p>Set the margin of text.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Background\u3011<\/p>\n<\/td>\n<td>\n<p>Check whether to display background, set the color and opacity of background after checked. <\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the background color of external lable.<\/p>\n<p>\u3010Opacity\u3011<\/p>\n<p>Set the opacity of external lable background, the greater the value the more the background opacity is. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Border\u3011<\/p>\n<\/td>\n<td>\n<p>Check whether to display border. <\/p>\n<p>\u3010Color\/Width\u3011<\/p>\n<p>Set the color and width of border.<\/p>\n<p>\u3010Type\u3011<\/p>\n<p>Set the type of border.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h4>19.4.3 \u3010Numeric Input\/Display\u3011<\/h4>\n<p>\u3010Numeric Input\/Display\u3011can display the numeric value saved in specific addresses; The\u3010Numeric Input\/Display\u3011can also be clicked to enter specific numeric values to the register address if the\u3010Allow Input\u3011setting is enabled.<\/p>\n<h5>19.4.3.1 \u3010Setting\u3011<\/h5>\n<p>The\u3010Numeric Input\/Display\u3011\u3010Setting\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p> <img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-148.jpg\" \/><\/p>\n<p>Figure 271\u3010Setting\u3011Screen of\u3010Numeric Input\/Display\u3011<\/p>\n<p>Table 138\u3010Setting\u3011Properties of\u3010Numeric Input\/Display\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Preview\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Preview the appearance of this object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Name\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The default name of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Comment\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the comment of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Update\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Provide user can select a suitable speed to get the latest data under different situation, such as you would like to get the latest data or adjust the object on the screen to display first, etc.<\/p>\n<p>Provide three modes:<\/p>\n<p>\u3010once\u3011: update once only when switch to this page or use the system tag\u3010OP_UPDATE_SCREEN_OBJECTS\u3011, update once when trigger once a time, it will keep update if the monitor address is internal address.<\/p>\n<p>\u3010normal\u3011: normal update speed.<\/p>\n<p>\u3010fast\u3011: the fastest update speed.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Display\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Monitor Address\u3011<\/p>\n<p>Set the monitored address of Numeric Input\/Display. The address can be from internal memory or a PLC register address.<\/p>\n<p>\u3010Data Type\u3011<\/p>\n<p>Set the data type of Numeric Input\/Display. The available data types are: 16Bit-BCD, 16Bit-INT, 16Bit-UINT, 16Bit-HEX, 32Bit-BCD, 32Bit-INT, 32Bit-UINT, 32Bit-HEX, 32Bit-FLOAT. When 32Bit-FLOAT is selected, you can also choose a display option for\u3010Exponential Format\u3011.<\/p>\n<p>\u3010Total Digits\u3011<\/p>\n<p>Set the total number of digits of Numeric Input\/Display.<\/p>\n<p>\u3010Digit Places\u3011<\/p>\n<p>Set the decimal place of the Numeric Input\/Display. If check \u3010Address\u3011then you can set the source address of digital places, and digital places can be dynamically control, data type used by address is same as\u3010Data Type\u3011.<\/p>\n<p>\u3010Default Range\u3011<\/p>\n<p>Set the\u3010Max\u3011and\u3010Min\u3011display of the Numeric Input\/Display. The\u3010Address\u3011checkbox can be used to set the source address for reading the maximum value or minimum value by\u3010Data Type\u3011.<\/p>\n<p>If this option is checked , the option will have a different default range depending on the\u3010Data Type\u3011. For example, type select as 16Bit-UINT, the\u3010Max\u3011is 65535,\u3010Min\u3011is 0<\/p>\n<p>\u3010Maximum Value\u3011<\/p>\n<p>Set the maximum value allowed for the numeric input \/ display to be displayed. If you check the address, the maximum value can be set to the value of the source address, allowing the maximum value to be dynamic. <\/p>\n<p>\u3010Minimum Value\u3011<\/p>\n<p>Set the minimum value allowed for the numeric input \/ display to be displayed. If you check the address, the minimum value can be set to the value of the source address, allowing the minimum value to be dynamic. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Input\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Allow Input\u3011<\/p>\n<p>Set whether to allow the input function for the Numeric Input\/Display object. Related input setting items will appear if this option is selected.<\/p>\n<p>\u3010Source\u3011<\/p>\n<p>When setting the touch Numeric Input\/Display object, the source of the keyboard is\u3010Pop-up Keypad\u3011,\u3010On-screen Keypad\u3011or\u3010USB Barcode Scanner\u3011.<\/p>\n<p>\u3010Pop-up Keypad\u3011<\/p>\n<p>Select the\u3010Keypad Screen\u3011no. to use.<\/p>\n<p>\u3010On-screen Keypad\u3011<\/p>\n<p>Use the self-planned keyboard on the basic screen, and the Numeric Input\/Display object object and the self-planned keyboard must be on the same basic screen.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-149.jpg\" \/><\/p>\n<p>\u3010USB Barcode Scanner\u3011<\/p>\n<p>When the source is selected as a USB barcode scanner, touching the Numeric Input\/Display object changes the object color and is put on standby for the input of the USB barcode scanner. When the input is complete, the data is transferred directly to the specified address. <\/p>\n<p>\u3010Default Range\u3011<\/p>\n<p>Default Range of the Numeric Input\/Display object,if this option is checked , the option will have a different default range depending on the\u3010Data Type\u3011. For example, type select as 16Bit-UINT, the\u3010Max\u3011is 65535,\u3010Min\u3011is 0 , if don\u2019t check this option, then can enter the\u3010Max\u3011and\u3010Min\u3011of the Numeric Input\/Display object.<\/p>\n<p>\u3010Max\u3011 <\/p>\n<p>Set the maximum allowed input value for Numeric Input\/Display. The\u3010Address\u3011checkbox can be used to set the source address for writing the maximum value by\u3010Data Type\u3011.<\/p>\n<p>\u3010Min\u3011<\/p>\n<p>Set the minimum allowed input value for Numeric Input\/Display. The\u3010Address\u3011checkbox can be used to set the source address for writing the minimum value by\u3010Data Type\u3011.<\/p>\n<p>\u3010Write different Address\u3011<\/p>\n<p>Set to allow writing to a different address for the Numeric Input\/Display object. Related settings will appear if this option is selected, allowing the setting of a target address for writing values. The source address for reading value and the target address for writing value will be different if this option is used.<\/p>\n<p>\u3010Notify before Writing\u3011<\/p>\n<p>The signal will notify before writing.<\/p>\n<p>Level: Set the bit as 0 or 1.<\/p>\n<p>Pulse: Set the bit to 1 and automatically restore to 0 after continuing the time set by\u3010Width\u3011.<\/p>\n<p>\u3010Notify after Writing\u3011<\/p>\n<p>The signal will notify after writing.<\/p>\n<p>Level: Set the bit as 0 or 1.<\/p>\n<p>Pulse: Set the bit to 1 and automatically restore to 0 after continuing the time set by\u3010Width\u3011.<\/p>\n<p>\u3010Individual Buzzer Setting\u3011<\/p>\n<p>Can individually setup buzzer setting.<\/p>\n<p>Includes 5 modes: Off, Short, Long, Short-Short, Long-Short.<\/p>\n<p>\u3010Barcode Continuous Input\u3011<\/p>\n<p>Base on\u3010USB Barcode Scanner\u3011, you can determine which component to input next by Bit controlling to reduce inconvenience of manual selection ; if there is a component in\u3010Comment\u3011, it will be displayed in Barcode input Order interface.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-150.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Post Processing\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Gain\/Offset\u3011<\/p>\n<p>Set whether to allow post-processing functions for the Numeric Input\/Display object. Related post processing settings will appear if this option is selected, allowing the setting of processing functions (add, subtract, multiply and divide) and constants. <\/p>\n<p>Formula is as follows: y=Ax+B, gain is A, offset for the B, y value is displayed for HMI, x is PLC value.<\/p>\n<p>For example, gain A=5, offset B=2, when the PLC x=3, HMI value display is 17 (17=(5*3)+2).<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Gain A<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Offset B<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>PLC Value x<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>HMI displayed value y<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>A=5<\/p>\n<\/td>\n<td>\n<p>B=2<\/p>\n<\/td>\n<td>\n<p>x=3<\/p>\n<\/td>\n<td>\n<p>y = 17<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>In the numerical input\/display object, enter 12 and the PLC value x will get 2 (x=(y-B)\/A, 2=(12-2)\/5).<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Gain A<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Offset B<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>PLC Value x<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>HMI displayed value y<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>A=5<\/p>\n<\/td>\n<td>\n<p>B=2<\/p>\n<\/td>\n<td>\n<p>y = 12<\/p>\n<\/td>\n<td>\n<p>x=2<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>The\u3010Address\u3011checkbox can be used to set the source address for processing constant. The type of data used to read the address is fixed to 16Bit-INT.<\/p>\n<p>\u3010Max.\/Min.\u3011<\/p>\n<p>Sets the ratio of the read source address and the display. Can be set by\u3010Data Max.\u3011,\u3010Data Min.\u3011,\u3010Display Max.\u3011and\u3010Display Min.\u3011to determine the proportional relationship.<\/p>\n<p>For example, read the PLC R100 address, and the maximum of the R100 is 100, minimum is 0, in the HMI wants to show the maximum is 1000, minimum is 0. So the\u3010Data Max.\u3011indicates the maximum value of the source address, can be set to 100,\u3010Data Min.\u3011indicates the minimum valueof the source address, can be set to 0,\u3010Display Max.\u3011indicates the maximum value of the display, can be set to 1000,\u3010Data Min.\u3011indicates the minimum value of the display, can be set to 0, when PLC register R100=50, then HMI will display as 500.<\/p>\n<p>If check the\u3010Address\u3011then can set the source address of the\u3010Data Max.\u3011,\u3010Data Min.\u3011,\u3010Display Max.\u3011and\u3010Display Min.\u3011, the data type of the read address is fixed to 16Bit-INT.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.3.2 \u3010Display\u3011<\/h5>\n<p>The\u3010Numeric Input\/Display\u3011\u3010Display\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p> <img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-151.png\" \/><\/p>\n<p>Figure 272\u3010Display\u3011Setting Screen of\u3010Numeric Input\/Display\u3011<\/p>\n<p>Table 139\u3010Display\u3011Setting Properties of\u3010Numeric Input\/Display\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Content\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Numeric Display\u3011<\/p>\n<p>Set the display method for the numeric value of Numeric Input\/Display. Selecting\u3010Zero Suppress\u3011will not display the zeros in front and selecting\u3010Leading Zeroes\u3011will display the zeros in front.<\/p>\n<p>\u30107-segment Display\u3011<\/p>\n<p>Set to allow the 7-segment display function for the Numeric Input\/Display object. If this option is selected, related settings for the style of the 7-segment display will appear. These styles include outline, filled, and flat. <\/p>\n<p>\u3010Mask\u3011<\/p>\n<p>Set the text of the numerical input\/display object displayed as asterisks (#), can not use the\u3010Mask\u3011function if use the\u30107-segment Display\u3011.<\/p>\n<p>\u3010Font\u3011<\/p>\n<p>Set the font for the displayed text of Numeric Input\/Display, can not use the\u3010Mask\u3011function if use the\u30107-segment Display\u3011.<\/p>\n<p>\u3010Size\u3011<\/p>\n<p>Set the size for the displayed text of Numeric Input\/Display, can not use the\u3010Mask\u3011function if use the\u30107-segment Display\u3011.<\/p>\n<p>\u3010Position\u3011<\/p>\n<p>Set the position for the displayed text of Numeric Input\/Display, can not use the\u3010Mask\u3011function if use the\u30107-segment Display\u3011.<\/p>\n<p>\u3010Blink\u3011<\/p>\n<p>Set the blinking function for the text of Numeric Input\/Display. There are four blinking speeds available to choose from: None, Slow, Medium and Fast, can not use the\u3010Mask\u3011function if use the\u30107-segment Display\u3011.<\/p>\n<p>\u3010Scrolling Text\u3011<\/p>\n<p>Set the scrolling text function for the text of Numeric Input\/Display. There are four scrolling speeds available to choose from\u00a0slow to fast.<\/p>\n<p>\u3010Format\u3011<\/p>\n<p>Set the format of the text displayed for the Numeric Input\/Display, including Bold, Italics and Underline, can not use the\u3010Mask\u3011function if use the\u30107-segment Display\u3011.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the color for the displayed text of Numeric Input\/Display.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Border\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Type\u3011<\/p>\n<p>Set the border types for Numeric Input\/Display.<\/p>\n<p>\u3010Color\/Thickness\u3011<\/p>\n<p>Set the color and thickness for the displayed border of Numeric Input\/Display.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Background\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Background\u3011<\/p>\n<p>Check whether to enable background<\/p>\n<p>\u3010Image\u3011<\/p>\n<p>Check whether to use image<\/p>\n<p>\u3010Source\u3011<\/p>\n<p>Set whether to use an image for the displayed background of the current editing state. When this option is checked, an\u3010Image Selector\u3011will appear asking the user to select an image either from the\u3010Image Library\u3011or from\u3010File\u3011.<\/p>\n<p>\u3010Rotate\u3011<\/p>\n<p>Set image rotation angle<\/p>\n<p>\u3010Flip\u3011<\/p>\n<p>Set the flip direction of the image, includes No Flip, X-Axis and Y-Axis.<\/p>\n<p>\u3010Tone Type\u3011<\/p>\n<p>You can choose the tone type you want to change. After selecting the type, you can choose the color from\u3010Tone Color\u3011.<\/p>\n<p>\u3010Background\u3011<\/p>\n<p>Check whether to enable the background. After checking, you can set the background color displayed in the current editing state from\u3010Color\u3011.<\/p>\n<p>\u3010Animation\u3011<\/p>\n<p>Check whether to enable animated effects. <\/p>\n<p>\u3010Mode\u3011Choose whether to use static or dynamic control elements to flicker.<\/p>\n<p>\u3010Blink\u3011Select the blinking mode, and use the numerical value to switch during dynamic control.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.3.3 \u3010Alarm\u3011<\/h5>\n<p>The\u3010Numeric Input\/Display\u3011\u3010Alarm\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p> <img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-152.png\" \/><\/p>\n<p>Figure 273\u3010Alarm\u3011Setting Screen of\u3010Numeric Input\/Display\u3011<\/p>\n<p>Table 140\u3010Alarm\u3011Setting Properties of\u3010Numeric Input\/Display\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Set Alarm\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set to enable the alarm function of Numeric Input\/Display. Alarm related settings will appear below when this option is selected.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Range\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the range of the alarm; the alarm condition is fulfilled when the numeric value of the Numeric Input\/Display reaches the maximum or minimum value.<\/p>\n<p>\u3010Max\u3011<\/p>\n<p>Set the maximum alarm value for the Numeric Input\/Display; the\u3010Address\u3011below can be used to set the source address for the maximum value by the\u3010Data Type\u3011 set in the\u3010Setting\u3011page.<\/p>\n<p>\u3010Min\u3011<\/p>\n<p>Set the minimum alarm value for the Numeric Input\/Display; the\u3010Address\u3011on the rear can be used to set the source address for the minimum value by the\u3010Data Type\u3011 set in the\u3010Setting\u3011page.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Display\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the appearance of the Numeric Input\/Display follows the change when the alarm conditions are fulfilled.<\/p>\n<p>\u3010Upper Limit Numeric Color\u3011<\/p>\n<p>Sets the color of the text for the Numeric Input\/Display when the set\u3010Max\u3011is exceeded. The\u3010Blink\u3011dropdown menu can be used to set the blinking speed of the text. There are four blinking speeds available to choose from: None, Slow, Medium and Fast.<\/p>\n<p>\u3010Upper Limit Background Color\u3011<\/p>\n<p>Sets the color of the background for the Numeric Input\/Display when the set\u3010Max\u3011is exceeded. The\u3010Blink\u3011dropdown menu can be used to set the blinking speed of the background. There are four blinking speeds available to choose from: None, Slow, Medium and Fast.<\/p>\n<p>\u3010Lower Limit Numeric Color\u3011<\/p>\n<p>Sets the color of the text for the Numeric Input\/Display when the set\u3010Min\u3011is not reached. The\u3010Blink\u3011 dropdown menu can be used to set the blinking speed of the text. There are four blinking speeds available to choose from: None, Slow, Medium and Fast.<\/p>\n<p>\u3010Lower Limit Background Color\u3011<\/p>\n<p>Sets the color of the background for the Numeric Input\/Display when the set\u3010Min\u3011is not reached. The\u3010Blink\u3011dropdown menu can be used to set the blinking speed of the background. There are four blinking speeds available to choose from: None, Slow, Medium and Fast.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.3.4 \u3010External Lable\u3011<\/h5>\n<p>The\u3010Numeric Input\/Display\u3011\u3010External Lable\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-153.png\" \/><\/p>\n<p>Figure 274\u3010External Lable\u3011Screen of\u3010Numeric Input\/Display\u3011<\/p>\n<p>Table 141\u3010Numeric Input\/Display\u3011\u3010External Lable\u3011setting properties<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Option<\/p>\n<\/td>\n<td>\n<p>Description<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Enable External Lable\u3011<\/p>\n<\/td>\n<td>\n<p>Checked, the bottom will appear the external lable settings of the object. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Direction\u3011<\/p>\n<\/td>\n<td>\n<p>Set the display direction, there are horizontal and vertical two selections.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Space\u3011<\/p>\n<\/td>\n<td>\n<p>Set the space between external lable and the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Left\/Top Lable(Direct Text)\u3011<\/p>\n<\/td>\n<td>\n<p>Fill in the text to be displayed on the left \/ top lable of the object, can be directly input or selected from\u3010Font Library\u3011. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Right\/Bottom Lable(Direct Text)\u3011<\/p>\n<\/td>\n<td>\n<p>Fill in the text to be displayed on the right \/ bottom lable of the object, can be directly input or selected from\u3010Font Library\u3011. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Text\u3011<\/p>\n<\/td>\n<td>\n<p>\u3010Direct Text Font\u3011<\/p>\n<p>Set the font of text.<\/p>\n<p>\u3010Direct Text Size\u3011<\/p>\n<p>Set the size of text, the default size is 20.<\/p>\n<p>\u3010Alignment\u3011<\/p>\n<p>Set the alignment of text.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the color of text.<\/p>\n<p>\u3010Format\u3011<\/p>\n<p>Set the format of text, includes Bold, Italic and Underline.<\/p>\n<p>\u3010Word Spacing\u3011<\/p>\n<p>Set the word space of text.<\/p>\n<p>\u3010Margin\u3011<\/p>\n<p>Set the margin of text.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Background\u3011<\/p>\n<\/td>\n<td>\n<p>Check whether to display background, set the color and opacity of background after checked. <\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the background color of external lable.<\/p>\n<p>\u3010Opacity\u3011<\/p>\n<p>Set the opacity of external lable background, the greater the value the more the background opacity is. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Border\u3011<\/p>\n<\/td>\n<td>\n<p>Check whether to display border. <\/p>\n<p>\u3010Color\/Width\u3011<\/p>\n<p>Set the color and width of border.<\/p>\n<p>\u3010Type\u3011<\/p>\n<p>Set the type of border.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h4>19.4.4 \u3010Text Input\/Display\u3011\t<\/h4>\n<p>\u3010Text Input\/Display\u3011can display the text saved in specific addresses. The\u3010Text Input\/Display\u3011can also be clicked to enter specific text to the register address if the\u3010Allow Input\u3011setting is enabled.<\/p>\n<h5>19.4.4.1 \u3010Setting\u3011<\/h5>\n<p>The\u3010Text Input\/Display\u3011\u3010Setting\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p> <img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-154.jpg\" \/><\/p>\n<p>Figure 275\u3010Setting\u3011Screen of\u3010Text Input\/Display\u3011<\/p>\n<p>Table 142\u3010Setting\u3011Properties of\u3010Text Input\/Display\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Preview\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Preview the appearance of this object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Name\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The default name of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Comment\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the comment of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Update\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Provide user can select a suitable speed to get the latest data under different situation, such as you would like to get the latest data or adjust the object on the screen to display first, etc.<\/p>\n<p>Provide three modes:<\/p>\n<p>\u3010once\u3011: update once only when switch to this page or use the system tag\u3010OP_UPDATE_SCREEN_OBJECTS\u3011, update once when trigger once a time, it will keep update if the monitor address is internal address.<\/p>\n<p>\u3010normal\u3011: normal update speed.<\/p>\n<p>\u3010fast\u3011: the fastest update speed.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Display\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Source\u3011<\/p>\n<p>The source of the text can be either an\u3010Address\u3011or from the\u3010Text Library\u3011. If\u3010Address\u3011is selected, the\u3010Monitor Address\u3011can be set below and directly corresponds to the text to display. If\u3010Text Library\u3011is selected, the\u3010Monitor Address\u3011corresponds to the entry in the\u3010Text Library\u3011to read the text from.<\/p>\n<p>\u3010Monitor Address\u3011<\/p>\n<p>Set the monitored address of Text Input\/Display; when this setting is changed, the final address below will change according to the inputted\u3010Monitor Address\u3011and\u3010Total Characters\u3011.<\/p>\n<p>\u3010Text Type\u3011<\/p>\n<p>Set the display type of text input\/display, includes Ascii String, Unicode String(Simplified Chinese, Traditional Chinese, GB18030(Simplified Chinese), and Big5(Traditional Chinese).<\/p>\n<p>\u3010Ascii String\u3011<\/p>\n<p>When select as\u3010Ascii String\u3011, the object will display the Ascii string corresponding to\u3010Monitor Address\u3011, because one register includes 2 Ascii, such as\u3010Total Characters\u3011set as 5, it will take 3 registers.<\/p>\n<p>\u3010Unicode String(Simplified Chinese)\u3011<\/p>\n<p>When select as\u3010Unicode String(Simplified Chinese)\u3011, the object will display the Unicode string corresponding to\u3010Monitor Address\u3011, because one register includes 1 Unicode, such as\u3010Total Characters\u3011set as 5, it will take 5 registers.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-155.jpg\" \/><\/p>\n<p>\u3010Unicode String(Others)\u3011<\/p>\n<p>When select as\u3010Unicode String(Others)\u3011, the object will display the Unicode string corresponding to\u3010Monitor Address\u3011, figure as shown below(display German), because one register includes 1 Unicode, such as\u3010Total Characters\u3011set as 15, it will take 15 registers.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-156.jpg\" \/><\/p>\n<p>\u3010Total Characters\u3011<\/p>\n<p>Sets the total number of characters for Text Input\/Display; when this setting is changed, the final address above will change according to the inputted\u3010Monitor Address\u3011and\u3010Total Characters\u3011.<\/p>\n<p>\u3010Byte Swap\u3011<\/p>\n<p>Select whether to enable the high and low byte swapping function.<\/p>\n<p>\u3010Each character occupies one word\u3011<\/p>\n<p>Set whether enable each character occupies one word, for example R0=A, R1=B, R2=C, R3=D, R4=E.<\/p>\n<p>\u3010Data Type\u3011<\/p>\n<p>Set the data type of the monitored address. This option is only enabled when\u3010Text Library\u3011is selected as the\u3010Source\u3011.<\/p>\n<p>\u3010Start Row\u3011<\/p>\n<p>Set the starting row in the\u3010Text Library\u3011that the text is obtained. For example, if the start row is set to 1 and the\u3010Monitor Address\u3011contains the value 3, the display will display the 4<sup>th<\/sup> entry in the\u3010Text Library\u3011. The\u3010Start Row\u3011can also be obtained from a specified address. This option is only enabled when\u3010Text Library\u3011is selected as the\u3010Source\u3011.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Input\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Allow Input\u3011<\/p>\n<p>Set whether to allow the input function for the Text Input\/Display object; related input settings will appear if this option is selected.<\/p>\n<p>\u3010Source\u3011<\/p>\n<p>When setting the touch Text Input\/Display object, the source of the keyboard is\u3010Pop-up Keypad\u3011,\u3010On-screen Keypad\u3011or\u3010USB Barcode Scanner\u3011.<\/p>\n<p>\u3010Pop-up Keypad\u3011<\/p>\n<p>Select the\u3010Keypad Screen\u3011no. to use.<\/p>\n<p>\u3010On-screen Keypad\u3011<\/p>\n<p>Use the self-planned keyboard on the basic screen, and the Text Input\/Display object object and the self-planned keyboard must be on the same basic screen.<\/p>\n<p>\u3010USB Barcode Scanner\u3011<\/p>\n<p>When the USB barcode scanner is selected as the input source, the text input\/display object will change color when touched and will wait for the input of the USB barcode reader. After the input is entered, the data will be transferred directly to the specified address. <\/p>\n<p>When\u3010Text Type\u3011choose as\u3010Unicode String(Simplified Chinese)\u3011, the input keypad can only use provide by system, click\u3010Text Input\/Display\u3011while executing, will show up the pinyin keypad, figure shown as below.<\/p>\n<p>Click the lower left corner\u3010English\/\u62fc\u97f3(\u7c21)\u3011, can switch to English or Pinyin.<\/p>\n<p>If the input keypad is in pinyin, you can choose the word after enter pinyin.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-157.jpg\" \/><\/p>\n<p>\u3010Write different Address\u3011<\/p>\n<p>Set to allow writing to a different address for the Text Input\/Display object. Related settings will appear if this option is selected, allowing the setting of target address for writing text. The source address for reading text and the target address for writing text will be different if this option is used.<\/p>\n<p>\u3010Notify before Writing\u3011<\/p>\n<p>The signal will notify before writing.<\/p>\n<p>Level: Set the bit as 0 or 1.<\/p>\n<p>Pulse: Set the bit to 1 and automatically restore to 0 after continuing the time set by\u3010Width\u3011.<\/p>\n<p>\u3010Notify after Writing\u3011<\/p>\n<p>The signal will notify after writing.<\/p>\n<p>Level: Set the bit as 0 or 1.<\/p>\n<p>Pulse: Set the bit to 1 and automatically restore to 0 after continuing the time set by\u3010Width\u3011.<\/p>\n<p>\u3010Individual Buzzer Setting\u3011<\/p>\n<p>Can individually setup buzzer setting.<\/p>\n<p>Includes 5 modes: Off, Short, Long, Short-Short, Long-Short.<\/p>\n<p>\u3010Barcode Continuous Input\u3011<\/p>\n<p>Base on\u3010USB Barcode Scanner\u3011, you can determine which component to input next by Bit controlling to reduce inconvenience of manual selection ; if there is a component in\u3010Comment\u3011, it will be displayed in Barcode input Order interface.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-158.png\" \/><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.4.2 \u3010Display\u3011<\/h5>\n<p>The\u3010Text Input\/Display\u3011\u3010Display\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p> <img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-159.png\" \/><\/p>\n<p>Figure 276\u3010Display\u3011Setting Screen of\u3010Text Input\/Display\u3011<\/p>\n<p>Table 143\u3010Display\u3011Setting Properties of\u3010Text Input\/Display\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Content\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Enable Word Wrap\u3011<\/p>\n<p>Enter a space in a word then will do the word wrap.<\/p>\n<p>\u3010Mask\u3011<\/p>\n<p>Set the text to be displayed as asterisks (*) for the Text Input\/Display object.<\/p>\n<p>\u3010Font\u3011<\/p>\n<p>Set the font for the text of the Text Input\/Display.<\/p>\n<p>\u3010Size\u3011<\/p>\n<p>Set the size for the text of the Text Input\/Display.<\/p>\n<p>\u3010Position\u3011<\/p>\n<p>Set the position for the text of the Text Input\/Display.<\/p>\n<p>\u3010Blink\u3011<\/p>\n<p>Set the blinking function for the text of the Text Input\/Display. There are four blinking speeds available to choose from: None, Slow, Medium and Fast.<\/p>\n<p>\u3010Scrolling Text\u3011<\/p>\n<p>Set the scrolling text function for the text of the Text Input\/Display. There are four scrolling speeds available to choose from slow to fast.<\/p>\n<p>\u3010Format\u3011<\/p>\n<p>Set the format of the text for the Text Input\/Display, including Bold, Italics and Underline.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the color for the text of the Text Input\/Display.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Border\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Type\u3011<\/p>\n<p>Set the border type for the Text Input\/Display.<\/p>\n<p>\u3010Color\/Thickness\u3011<\/p>\n<p>Set the color and thickness for the border of the Text Input\/Display.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Background\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Background\u3011<\/p>\n<p>Check whether to enable background<\/p>\n<p>\u3010Image\u3011<\/p>\n<p>Check whether to use image<\/p>\n<p>\u3010Source\u3011<\/p>\n<p>Set whether to use an image for the displayed background of the current editing state. When this option is checked, an\u3010Image Selector\u3011will appear asking the user to select an image either from the\u3010Image Library\u3011or from\u3010File\u3011.<\/p>\n<p>\u3010Rotate\u3011<\/p>\n<p>Set image rotation angle<\/p>\n<p>\u3010Flip\u3011<\/p>\n<p>Set the flip direction of the image, includes No Flip, X-Axis and Y-Axis.<\/p>\n<p>\u3010Tone Type\u3011<\/p>\n<p>You can choose the tone type you want to change. After selecting the type, you can choose the color from\u3010Tone Color\u3011.<\/p>\n<p>\u3010Background\u3011<\/p>\n<p>Check whether to enable the background. After checking, you can set the background color displayed in the current editing state from\u3010Color\u3011.<\/p>\n<p>\u3010Animation\u3011<\/p>\n<p>Check whether to enable animated effects. <\/p>\n<p>\u3010Mode\u3011Choose whether to use static or dynamic control elements to flicker.<\/p>\n<p>  \u3010Blink\u3011Select the blinking mode, and use the numerical value to switch during dynamic control.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.4.3 \u3010External Lable\u3011<\/h5>\n<p>The\u3010Text Input\/Display\u3011\u3010External Lable\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-160.png\" \/><\/p>\n<p>Figure 277\u3010External Lable\u3011Setting Screen of\u3010Text Input\/Display\u3011<\/p>\n<p>Table 144\u3010Text Input\/Display\u3011\u3010External Lable\u3011setting properties<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Option<\/p>\n<\/td>\n<td>\n<p>Description<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Enable External Lable\u3011<\/p>\n<\/td>\n<td>\n<p>Checked, the bottom will appear the external lable settings of the object. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Direction\u3011<\/p>\n<\/td>\n<td>\n<p>Set the display direction, there are horizontal and vertical two selections.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Space\u3011<\/p>\n<\/td>\n<td>\n<p>Set the space between external lable and the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Left\/Top Lable(Direct Text)\u3011<\/p>\n<\/td>\n<td>\n<p>Fill in the text to be displayed on the left \/ top lable of the object, can be directly input or selected from\u3010Font Library\u3011. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Right\/Bottom Lable(Direct Text)\u3011<\/p>\n<\/td>\n<td>\n<p>Fill in the text to be displayed on the right \/ bottom lable of the object, can be directly input or selected from\u3010Font Library\u3011. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Text\u3011<\/p>\n<\/td>\n<td>\n<p>\u3010Direct Text Font\u3011<\/p>\n<p>Set the font of text.<\/p>\n<p>\u3010Direct Text Size\u3011<\/p>\n<p>Set the size of text, the default size is 20.<\/p>\n<p>\u3010Alignment\u3011<\/p>\n<p>Set the alignment of text.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the color of text.<\/p>\n<p>\u3010Format\u3011<\/p>\n<p>Set the format of text, includes Bold, Italic and Underline.<\/p>\n<p>\u3010Word Spacing\u3011<\/p>\n<p>Set the word space of text.<\/p>\n<p>\u3010Margin\u3011<\/p>\n<p>Set the margin of text.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Background\u3011<\/p>\n<\/td>\n<td>\n<p>Check whether to display background, set the color and opacity of background after checked. <\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the background color of external lable.<\/p>\n<p>\u3010Opacity\u3011<\/p>\n<p>Set the opacity of external lable background, the greater the value the more the background opacity is. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Border\u3011<\/p>\n<\/td>\n<td>\n<p>Check whether to display border. <\/p>\n<p>\u3010Color\/Width\u3011<\/p>\n<p>Set the color and width of border.<\/p>\n<p>\u3010Type\u3011<\/p>\n<p>Set the type of border.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h4>19.4.5 \u3010QR code Input\/Display\u3011<\/h4>\n<p>\u3010QR code Input\/Display\u3011can display QR code on the screen.<\/p>\n<h5>19.4.5.1 \u3010Setting\u3011<\/h5>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-161.jpg\" \/><\/p>\n<p>Figure 278\u3010Setting\u3011Screen of\u3010QR code Input\/Display\u3011<\/p>\n<p>Table 145\u3010Setting\u3011Properties of\u3010QR code Input\/Display\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Error Correction Level\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>If the QR code graphic is damaged, the content can still be read by the machine.<\/p>\n<p>Support 4 levels of Low (7%), Medium (15%), Quartile (25%), High (30%).<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Color\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the color of QR code graphics.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Source\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Select the reading address of the QR code graphic data .<\/p>\n<p>\u3010Address\u3011<\/p>\n<p>Read the data of the set monitoring address, support Ascii String, Unicode (Simplified Chinese, Traditional Chinese, Others), GB18030 (Simplified Chinese), BIG5 (Traditional Chinese).<\/p>\n<p>\u3010Text Library\u3011<\/p>\n<p>Read the data in the text library to display the QR code.<\/p>\n<p>\u3010Direct Text\u3011<\/p>\n<p>After selecting, an input window will appear for the user to enter text<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Input\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Allow Input\u3011<\/p>\n<p>Set whether to allow the input function for the Numeric Input\/Display object. Related input setting items will appear if this option is selected.<\/p>\n<p>\u3010Source\u3011<\/p>\n<p>When setting the touch Numeric Input\/Display object, the source of the keyboard is\u3010Pop-up Keypad\u3011,\u3010On-screen Keypad\u3011or\u3010USB Barcode Scanner\u3011.<\/p>\n<p>\u3010Pop-up Keypad\u3011<\/p>\n<p>Select the\u3010Keypad Screen\u3011no. to use.<\/p>\n<p>\u3010On-screen Keypad\u3011<\/p>\n<p>Use the self-planned keyboard on the basic screen, and the Numeric Input\/Display object object and the self-planned keyboard must be on the same basic screen.<\/p>\n<p>\u3010USB Barcode Scanner\u3011<\/p>\n<p>When the source is selected as a USB barcode scanner, touching the Numeric Input\/Display object changes the object color and is put on standby for the input of the USB barcode scanner. When the input is complete, the data is transferred directly to the specified address. <\/p>\n<p>\u3010Write different Address\u3011<\/p>\n<p>Set to allow writing to a different address for the Numeric Input\/Display object. Related settings will appear if this option is selected, allowing the setting of a target address for writing values. The source address for reading value and the target address for writing value will be different if this option is used.<\/p>\n<p>\u3010Notify before Writing\u3011<\/p>\n<p>The signal will notify before writing.<\/p>\n<p>Level: Set the bit as 0 or 1.<\/p>\n<p>Pulse: Set the bit to 1 and automatically restore to 0 after continuing the time set by\u3010Width\u3011.<\/p>\n<p>\u3010Notify after Writing\u3011<\/p>\n<p>The signal will notify after writing.<\/p>\n<p>Level: Set the bit as 0 or 1.<\/p>\n<p>Pulse: Set the bit to 1 and automatically restore to 0 after continuing the time set by\u3010Width\u3011.<\/p>\n<p>\u3010Individual Buzzer Setting\u3011<\/p>\n<p>Can individually setup buzzer setting.<\/p>\n<p>Includes 5 modes: Off, Short, Long, Short-Short, Long-Short.<\/p>\n<p>\u3010Barcode Continuous Input\u3011<\/p>\n<p>Base on\u3010USB Barcode Scanner\u3011, you can determine which component to input next by Bit controlling to reduce inconvenience of manual selection ; if there is a component in\u3010Comment\u3011, it will be displayed in Barcode input Order interface.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-162.png\" \/><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.5.2 \u3010External Lable\u3011<\/h5>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-163.png\" \/><\/p>\n<p>Figure 279\u3010External Lable\u3011Setting Screen of\u3010QR code Input\/Display\u3011<\/p>\n<p>Table 146\u3010External Lable\u3011Properties of\u3010QR code Input\/Display\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Option<\/p>\n<\/td>\n<td>\n<p>Description<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Enable External Lable\u3011<\/p>\n<\/td>\n<td>\n<p>Checked, the bottom will appear the external lable settings of the object. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Direction\u3011<\/p>\n<\/td>\n<td>\n<p>Set the display direction, there are horizontal and vertical two selections.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Space\u3011<\/p>\n<\/td>\n<td>\n<p>Set the space between external lable and the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Left\/Top Lable(Direct Text)\u3011<\/p>\n<\/td>\n<td>\n<p>Fill in the text to be displayed on the left \/ top lable of the object, can be directly input or selected from\u3010Font Library\u3011. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Right\/Bottom Lable(Direct Text)\u3011<\/p>\n<\/td>\n<td>\n<p>Fill in the text to be displayed on the right \/ bottom lable of the object, can be directly input or selected from\u3010Font Library\u3011. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Text\u3011<\/p>\n<\/td>\n<td>\n<p>\u3010Direct Text Font\u3011<\/p>\n<p>Set the font of text.<\/p>\n<p>\u3010Direct Text Size\u3011<\/p>\n<p>Set the size of text, the default size is 20.<\/p>\n<p>\u3010Alignment\u3011<\/p>\n<p>Set the alignment of text.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the color of text.<\/p>\n<p>\u3010Format\u3011<\/p>\n<p>Set the format of text, includes Bold, Italic and Underline.<\/p>\n<p>\u3010Word Spacing\u3011<\/p>\n<p>Set the word space of text.<\/p>\n<p>\u3010Margin\u3011<\/p>\n<p>Set the margin of text.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Background\u3011<\/p>\n<\/td>\n<td>\n<p>Check whether to display background, set the color and opacity of background after checked. <\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the background color of external lable.<\/p>\n<p>\u3010Opacity\u3011<\/p>\n<p>Set the opacity of external lable background, the greater the value the more the background opacity is. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Border\u3011<\/p>\n<\/td>\n<td>\n<p>Check whether to display border. <\/p>\n<p>\u3010Color\/Width\u3011<\/p>\n<p>Set the color and width of border.<\/p>\n<p>\u3010Type\u3011<\/p>\n<p>Set the type of border.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h4>19.4.6 \u3010Date\/Time Display\u3011<\/h4>\n<p>\u3010Date\/Time Display\u3011can display the current date and time according to the format set by the user.<\/p>\n<h5>19.4.6.1 \u3010Setting\u3011<\/h5>\n<p>The\u3010Date\/Time Display\u3011\u3010Setting\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p> <img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-164.png\" \/><\/p>\n<p>Figure 280\u3010Setting\u3011Screen of\u3010Date\/Time Display\u3011<\/p>\n<p>Table 147\u3010Setting\u3011Properties of\u3010Date\/Time Display\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Preview\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Previews the appearance of this object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Name\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The default name of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Comment\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the comment of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Enable Date Display\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set to enable date display; a date format selector will appear for the user to select the display format of the date if this option is selected.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Enable Time Display\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set to enable time display. A time format selector will appear for the user to select the display format of the time if this option is selected.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Enable Day-of-week Display\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set to enable day-of-the-week display; a day-of-the-week format selector will appear for the user to select the display format of the day-of-the-week if this option is selected. This option is not available if a\u30107-segment Display\u3011is used, please uncheck the \u30107-segment Display\u3011option in the\u3010Date\/Time Display\u3011\u3010Display\u3011page.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.6.2 \u3010Display\u3011<\/h5>\n<p>\u3010Date\/Time Display\u3011\u3010Display\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p> <img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-165.png\" \/><\/p>\n<p>Figure 281\u3010Display\u3011Setting Screen of\u3010Date\/Time Display\u3011<\/p>\n<p>Table 148\u3010Display\u3011Setting Properties of\u3010Date\/Time Display\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Content\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u30107-segment Display\u3011<\/p>\n<p>Set to use the 7-segment display function for the Date\/Time Display object. If this option is selected, related settings for setting of style of the 7-segment display will appear, including outlined, filled, flat.<\/p>\n<p><strong>Note: while this option is selected, because it can only show part of text (0\/O, 1, 2, 3, 4, 5\/S, 6, 7, 8, 9\/g, A, B, C, D, E, F, H, H, L, o, P, r, u, U, Y), the\u3010Enable Day-of-week Display\u3011function will be disabled.<\/strong><\/p>\n<p>\u3010Font\u3011<\/p>\n<p>Set the font for the text of the Date\/Time Display.<\/p>\n<p>\u3010Size\u3011<\/p>\n<p>Set the size for the text of the Date\/Time Display.<\/p>\n<p>\u3010Position\u3011<\/p>\n<p>Set the position for the text of the Date\/Time Display.<\/p>\n<p>\u3010Blink\u3011<\/p>\n<p>Set the blinking function for the text of the Date\/Time Display. There are four blinking speeds available to choose from: None, Slow, Medium and Fast.<\/p>\n<p>\u3010Scrolling Text\u3011<\/p>\n<p>Set the scrolling text function for the text of the Date\/Time Display. There are four scrolling speeds available to choose from\u00a0slow to fast.<\/p>\n<p>\u3010Format\u3011<\/p>\n<p>Set the format of the text for the Date\/Time Display, including Bold, Italics and Underline.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the color for the text of Date\/Time Display.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Border\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Type\u3011<\/p>\n<p>Set the border type for the Date\/Time Display.<\/p>\n<p>\u3010Color\/Thickness\u3011<\/p>\n<p>Set the color and thickness for the border of the Date\/Time Display.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Background\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Background\u3011<\/p>\n<p>Check whether to enable background<\/p>\n<p>\u3010Image\u3011<\/p>\n<p>Check whether to use image<\/p>\n<p>\u3010Source\u3011<\/p>\n<p>Set whether to use an image for the displayed background of the current editing state. When this option is checked, an\u3010Image Selector\u3011will appear asking the user to select an image either from the\u3010Image Library\u3011or from\u3010File\u3011.<\/p>\n<p>\u3010Rotate\u3011<\/p>\n<p>Set image rotation angle<\/p>\n<p>\u3010Flip\u3011<\/p>\n<p>Set the flip direction of the image, includes No Flip, X-Axis and Y-Axis.<\/p>\n<p>\u3010Tone Type\u3011<\/p>\n<p>You can choose the tone type you want to change. After selecting the type, you can choose the color from\u3010Tone Color\u3011.<\/p>\n<p>\u3010Background\u3011<\/p>\n<p>Check whether to enable the background. After checking, you can set the background color displayed in the current editing state from\u3010Color\u3011.<\/p>\n<p>\u3010Animation\u3011<\/p>\n<p>Check whether to enable animated effects. <\/p>\n<p>\u3010Mode\u3011Choose whether to use static or dynamic control elements to flicker.<\/p>\n<p>  \u3010Blink\u3011Select the blinking mode, and use the numerical value to switch during dynamic control.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h4>19.4.7 \u3010Window Screen Display\u3011<\/h4>\n<p>\u3010Window Screen Display\u3011can display the\u3010Window Screen\u3011created in the project, and supports using the numeric value of specific addresses to control the\u3010Window Screen\u3011displayed by the Window Screen Display.<\/p>\n<h5>19.4.7.1 \u3010Setting\u3011<\/h5>\n<p>The\u3010Window Screen Display\u3011\u3010Setting\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p> <img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-166.png\" \/><\/p>\n<p>Figure 282\u3010Setting\u3011Screen of\u3010Window Screen Display\u3011<\/p>\n<p>Table 149\u3010Setting\u3011Properties of\u3010Window Screen Display\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Name\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The default name of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Comment\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the comment of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Select Screens by Address\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set to select a screen by address. <\/p>\n<p>The\u3010Window Screen\u3011displayed by Window Screen Display will be determined by the numeric value saved in\u3010Window Selection Address\u3011if this setting is selected. If this setting is not selected, the Window Screen Display will have a fixed display of the\u3010Window Screen\u3011selected by\u3010Window Number\u3011.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Window Number\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the\u3010Window Screen\u3011displayed by the Window Screen Display.<\/p>\n<p>This setting will appear if\u3010Select Screens by Address\u3011is not selected.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Window Selection Address\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the\u3010Window Selection Address\u3011of the Window Screen Display. When the HMI is operating, the Window Screen Display will read the\u3010Window Selection Address\u3011according to the\u3010Data Type\u3011Set, and display the\u3010Window Screen\u3011with the number that matches the numeric value read.<\/p>\n<p>This setting will appear if\u3010Select Screens by Address\u3011is selected.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Data Type\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the Data Type of the\u3010Window Selection Address\u3011.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Auto adjust object size\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the size of\u3010Window Screen Display\u3011, automatically adjust object size depending on the selected window screen.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Show Screens by Address\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>After checking, the title bar will not appear when placing this component.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h4>19.4.8 \u3010Meter\u3011<\/h4>\n<p>\u3010Meter\u3011can read the value of specific registers and display this value by a pointer indicator.<\/p>\n<p>Introduction to the property setting dialog are as follows:<\/p>\n<h5>19.4.8.1 \u3010General\u3011<\/h5>\n<p>The\u3010Meter\u3011\u3010General\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-167.jpg\" \/><\/p>\n<p>Figure 283\u3010General\u3011Setting Screen of\u3010Meter\u3011<\/p>\n<p>Table 150\u3010General\u3011Setting Properties of\u3010Meter\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Preview\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Preview the appearance of this object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Name\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The default name of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Comment\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the comment of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Update\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Provide user can select a suitable speed to get the latest data under different situation, such as you would like to get the latest data or adjust the object on the screen to display first, etc.<\/p>\n<p>Provide three modes:<\/p>\n<p>\u3010once\u3011: update once only when switch to this page or use the system tag\u3010OP_UPDATE_SCREEN_OBJECTS\u3011, update once when trigger once a time, it will keep update if the monitor address is internal address.<\/p>\n<p>\u3010normal\u3011: normal update speed.<\/p>\n<p>\u3010fast\u3011: the fastest update speed.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Monitor Address\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Address\u3011<\/p>\n<p>Set the address to monitor.<\/p>\n<p>\u3010Data Type\u3011<\/p>\n<p>Set the data format of the monitored address.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Source Range\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Max\u3011<\/p>\n<p>Set the maximum value of the display range.<\/p>\n<p>-\u3010Address\u3011<\/p>\n<p>    Select to allow a maximum value of for the display range to change according to the contents of the specified address.<\/p>\n<p>\u3010Min\u3011<\/p>\n<p>Set the minimum value of the display range.<\/p>\n<p>-\u3010Address\u3011<\/p>\n<p>    Select to allow a minimum value of for the display range to change according to the contents of the specified address.<\/p>\n<p><strong>Note: When\u3010Address\u3011is selected, the content value of the maximum address must be greater than the content value of the minimum address in order for the display range to be changed validly.<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Post Processing\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010None\u3011<\/p>\n<p>The object unused the post processing function.<\/p>\n<p>\u3010Gain\/Offset\u3011<\/p>\n<p>Set whether to allow post-processing functions for the object. Related post processing settings will appear if this option is selected, allowing the setting of processing functions (add, subtract, multiply and divide) and constants. <\/p>\n<p>Formula is as follows: y=Ax+B, gain is A, offset for the B, y value is displayed for HMI, x is PLC value.<\/p>\n<p>For example, gain A=5, offset B=2, when the PLC x=3, HMI value display is 17 (17=(5*3)+2).<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Gain A<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Offset B<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>PLC Value x<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>HMI displayed value y<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>A=5<\/p>\n<\/td>\n<td>\n<p>B=2<\/p>\n<\/td>\n<td>\n<p>x=3<\/p>\n<\/td>\n<td>\n<p>y = 17<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>In the object, enter 12 and the PLC value x will get 2 (x=(y-B)\/A, 2=(12-2)\/5).<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Gain A<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Offset B<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>PLC Value x<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>HMI displayed value y<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>A=5<\/p>\n<\/td>\n<td>\n<p>B=2<\/p>\n<\/td>\n<td>\n<p>y = 12<\/p>\n<\/td>\n<td>\n<p>x=2<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>The\u3010Address\u3011checkbox can be used to set the source address for processing constant. The type of data used to read the data type of the read address will change according to the setting of the monitor address.<\/p>\n<p>\u3010Max.\/Min.\u3011<\/p>\n<p>Sets the ratio of the read source address and the display. Can be set by\u3010Data Max.\u3011,\u3010Data Min.\u3011,\u3010Display Max.\u3011and\u3010Display Min.\u3011to determine the proportional relationship.<\/p>\n<p>For example, read the PLC R100 address, and the maximum of the R100 is 100, minimum is 0, in the HMI wants to show the maximum is 1000, minimum is 0. So the\u3010Data Max.\u3011indicates the maximum value of the source address, can be set to 100,\u3010Data Min.\u3011indicates the minimum valueof the source address, can be set to 0,\u3010Display Max.\u3011indicates the maximum value of the display, can be set to 1000,\u3010Data Min.\u3011indicates the minimum value of the display, can be set to 0, when PLC register R100=50, then HMI will display as 500.<\/p>\n<p>If check the\u3010Address\u3011then can set the source address of the\u3010Data Max.\u3011,\u3010Data Min.\u3011,\u3010Display Max.\u3011and\u3010Display Min.\u3011, the data type of the read address will change according to the setting of the monitor address.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.8.2 \u3010Display\u3011<\/h5>\n<p>The\u3010Meter\u3011\u3010Display\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-168.png\" \/><\/p>\n<p>Figure 284\u3010Display\u3011Setting Screen of\u3010Meter\u3011<\/p>\n<p>Table 151\u3010Display\u3011Setting Properties of\u3010Meter\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Meter Type\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Type\u3011<\/p>\n<p> Set the meter type. There are the following four types:<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-169.jpg\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Meter Shape\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Shape\u3011<\/p>\n<p>Set the meter shape. There are Circular\/Semicircular\/Quadrant available for selection.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-170.jpg\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Swing Shape\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the swinging angle of the meter indicator.<\/p>\n<p>\u3010Shape Select\u3011<\/p>\n<p>Users can click this button to set common pointer swinging angles quickly.<\/p>\n<p>\u3010Swing Direction\u3011<\/p>\n<p>Set the swinging direction. There are two options:\u3010CC\u3011(Clockwise) and\u3010CCW\u3011(Counter-Clockwise).<\/p>\n<p>\u3010Start Angle\u3011<\/p>\n<p>Set the start angle of the meter.<\/p>\n<p>\u3010End Angle\u3011<\/p>\n<p>Set the end angle of the meter.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Border\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Color\u3011<\/p>\n<p>Set the color of the border.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Background\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Color\u3011<\/p>\n<p>Set the background color and filling of the meter.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Indicator\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Color\u3011<\/p>\n<p>Set the color of the indicator.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Decoration\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Glass effect\u3011<\/p>\n<p>Set whether or not the \u201cglass effect\u201d is shown.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.8.3 \u3010Scale\u3011<\/h5>\n<p>The\u3010Meter\u3011\u3010Scale\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-171.png\" \/><\/p>\n<p>Figure 285\u3010Scale\u3011Setting Screen of\u3010Meter\u3011<\/p>\n<p>Table 152\u3010Scale\u3011Setting Properties of\u3010Meter\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Scale Frame\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Color\u3011<\/p>\n<p>Set the color of the scale.<\/p>\n<p>\u3010Major Number\u3011<\/p>\n<p>Set the number of major ticks.<\/p>\n<p>\u3010Sub Number\u3011<\/p>\n<p>Set the number of minor ticks.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Text\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Style\u3011<\/p>\n<p>Set the style of the text, including radial and normal.<\/p>\n<p>\u3010Radial\u3011<\/p>\n<p>The text is angled such that it is perpendicular to the major ticks.<\/p>\n<p>\u3010Normal\u3011<\/p>\n<p>The text is angled such that it is parallel to the horizontal.<\/p>\n<p>\u3010Font\u3011<\/p>\n<p>Select the font for the text.<\/p>\n<p>\u3010Format\u3011<\/p>\n<p>Select the format of the text.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Select the color of the text.<\/p>\n<p>\u3010Auto Fit Size\u3011<\/p>\n<p>If checked, the size of the text is automatically adjusted according to the size of the object. If not checked, the user is able to manually adjust the text size.<\/p>\n<p>\u3010Precision\u3011<\/p>\n<p>Set the number of decimal places the labels display.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.8.4 \u3010Range\u3011<\/h5>\n<p>The\u3010Meter\u3011\u3010Range\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-172.png\" \/><\/p>\n<p>Figure 286\u3010Range\u3011Setting Screen of\u3010Meter\u3011<\/p>\n<p>Table 153\u3010Range\u3011Setting Properties of\u3010Meter\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Scale Frame\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Select to display range marks on the meter.<\/p>\n<p>\u3010Dynamic Range\u3011<\/p>\n<p>Select to allow a maximum and minimum value of for the display range to change according to the contents of the specified address.<\/p>\n<p><strong>Note: When\u3010Dynamic Range\u3011is selected, the content value of the maximum address must be greater than the content value of the minimum address in order for the range marks to be changed validly.<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Upper Limit\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Color\u3011<\/p>\n<p>Set the color of the upper limit range.<\/p>\n<p>\u3010Value\u3011<\/p>\n<p>Set the value of the upper limit. When\u3010Dynamic Range\u3011is selected, the address of the upper limit value will be set.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Normal\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Color\u3011<\/p>\n<p>Set the color of the normal range.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Lower Limit\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Color\u3011<\/p>\n<p>Set the color of the lower limit range.<\/p>\n<p>\u3010Value\u3011<\/p>\n<p>Set the value of the lower limit. When\u3010Dynamic Range\u3011is selected, the address of the lower limit value will be set.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h4>19.4.9 \u3010Linear Meter\u3011<\/h4>\n<p>\u3010Linear Meter\u3011can read the value of specific registers and display the value read using changes in the length or width of a bar.<\/p>\n<p>Introduction to the property setting dialog is as follows<\/p>\n<h5>19.4.9.1 \u3010General\u3011<\/h5>\n<p>The\u3010Linear Meter\u3011\u3010General\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-173.jpg\" \/><\/p>\n<p>Figure 287\u3010General\u3011Setting Screen of\u3010Linear Meter\u3011<\/p>\n<p>Table 154\u3010General\u3011Setting Properties of\u3010Linear Meter\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Preview\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Preview the appearance of this object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Name\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The default name of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Comment\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the comment of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Update\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Provide user can select a suitable speed to get the latest data under different situation, such as you would like to get the latest data or adjust the object on the screen to display first, etc.<\/p>\n<p>Provide three modes:<\/p>\n<p>\u3010once\u3011: update once only when switch to this page or use the system tag\u3010OP_UPDATE_SCREEN_OBJECTS\u3011, update once when trigger once a time, it will keep update if the monitor address is internal address.<\/p>\n<p>\u3010normal\u3011: normal update speed.<\/p>\n<p>\u3010fast\u3011: the fastest update speed.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Monitor Address\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Address\u3011<\/p>\n<p>Set the address to monitor.<\/p>\n<p>\u3010Data Type\u3011<\/p>\n<p>Set the data format of the monitor address.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Source Range\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Max\u3011<\/p>\n<p>Set the maximum value of the display range.<\/p>\n<p>-\u3010Address\u3011<\/p>\n<p>    Select to allow a maximum value of for the display range to change according to the contents of the specified address.<\/p>\n<p>\u3010Min\u3011<\/p>\n<p>Set the minimum value of the display range.<\/p>\n<p>-\u3010Address\u3011<\/p>\n<p>    Select to allow a minimum value of for the display range to change according to the contents of the specified address.<\/p>\n<p><strong>Note: When\u3010Address\u3011is selected, the content value of the maximum address must be greater than the content value of the minimum address in order for the display range to be changed validly.<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Post Processing\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010None\u3011<\/p>\n<p>The object unused the post processing function.<\/p>\n<p>\u3010Gain\/Offset\u3011<\/p>\n<p>Set whether to allow post-processing functions for the object. Related post processing settings will appear if this option is selected, allowing the setting of processing functions (add, subtract, multiply and divide) and constants. <\/p>\n<p>Formula is as follows: y=Ax+B, gain is A, offset for the B, y value is displayed for HMI, x is PLC value.<\/p>\n<p>For example, gain A=5, offset B=2, when the PLC x=3, HMI value display is 17 (17=(5*3)+2).<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Gain A<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Offset B<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>PLC Value x<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>HMI displayed value y<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>A=5<\/p>\n<\/td>\n<td>\n<p>B=2<\/p>\n<\/td>\n<td>\n<p>x=3<\/p>\n<\/td>\n<td>\n<p>y = 17<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>In the object, enter 12 and the PLC value x will get 2 (x=(y-B)\/A, 2=(12-2)\/5).<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Gain A<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Offset B<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>PLC Value x<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>HMI displayed value y<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>A=5<\/p>\n<\/td>\n<td>\n<p>B=2<\/p>\n<\/td>\n<td>\n<p>y = 12<\/p>\n<\/td>\n<td>\n<p>x=2<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>The\u3010Address\u3011checkbox can be used to set the source address for processing constant. The type of data used to read the data type of the read address will change according to the setting of the monitor address.<\/p>\n<p>\u3010Max.\/Min.\u3011<\/p>\n<p>Sets the ratio of the read source address and the display. Can be set by\u3010Data Max.\u3011,\u3010Data Min.\u3011,\u3010Display Max.\u3011and\u3010Display Min.\u3011to determine the proportional relationship.<\/p>\n<p>For example, read the PLC R100 address, and the maximum of the R100 is 100, minimum is 0, in the HMI wants to show the maximum is 1000, minimum is 0. So the\u3010Data Max.\u3011indicates the maximum value of the source address, can be set to 100,\u3010Data Min.\u3011indicates the minimum valueof the source address, can be set to 0,\u3010Display Max.\u3011indicates the maximum value of the display, can be set to 1000,\u3010Data Min.\u3011indicates the minimum value of the display, can be set to 0, when PLC register R100=50, then HMI will display as 500.<\/p>\n<p>If check the\u3010Address\u3011then can set the source address of the\u3010Data Max.\u3011,\u3010Data Min.\u3011,\u3010Display Max.\u3011and\u3010Display Min.\u3011, the data type of the read address will change according to the setting of the monitor address.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.9.2 \u3010Display\u3011<\/h5>\n<p>The\u3010Linear Meter\u3011\u3010Display\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-174.png\" \/><\/p>\n<p>Figure 288\u3010Display\u3011Setting Screen of\u3010Linear Meter\u3011<\/p>\n<p>Table 155\u3010Display\u3011Setting Properties of\u3010Linear Meter\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Type\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>There are 2 types: Rectangle and Cylinder.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Direction\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the direction of the Linear Meter<\/p>\n<p>\u3010Bi-Direction Mode\u3011<\/p>\n<p>Select for a Linear Meter that changes with respect to the reference point -\u3010Middle Value\u3011.<\/p>\n<p>\u3010Address\u3011<\/p>\n<p>Once selected, the middle value will become dynamic.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Indicator\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Background\u3011<\/p>\n<p>Set the background color of the indicator.<\/p>\n<p>\u3010Display\u3011<\/p>\n<p>Set the display color of the indicator.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Border\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Color\u3011<\/p>\n<p>Set the color of the border.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Background\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Color\u3011<\/p>\n<p>Set the color and filling of the background.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Decoration\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Glass Effect\u3011<\/p>\n<p>Set whether or not the \u201cglass effect\u201d is shown.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.9.3 \u3010Scale\u3011<\/h5>\n<p>The\u3010Linear Meter\u3011\u3010Scale\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-175.png\" \/><\/p>\n<p>Figure 289\u3010Scale\u3011Setting Screen of\u3010Linear Meter\u3011<\/p>\n<p>Table 156\u3010Scale\u3011Setting Screen of\u3010Linear Meter\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Scale Frame\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Color\u3011<\/p>\n<p>Set the color of the scale.<\/p>\n<p>\u3010Major Number\u3011<\/p>\n<p>Set the number of major ticks.<\/p>\n<p>\u3010Sub Number\u3011<\/p>\n<p>Set the number of minor ticks.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Text\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Font\u3011<\/p>\n<p>Select the font for the text.<\/p>\n<p>\u3010Format\u3011<\/p>\n<p>Select the format of the text.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Select the color of the text.<\/p>\n<p>\u3010Auto Fit Size\u3011<\/p>\n<p>If checked, the size of the text is automatically adjusted according to the size of the object. If not checked, the user is able to manually adjust the text size.<\/p>\n<p>\u3010Precision\u3011<\/p>\n<p>Set the number of decimal places the labels display.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Scale Position\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>When the user set the direction of the Linear Meter to\u3010Upward\u3011or\u3010Downward\u3011,\u3010Left\u3011or\u3010Right\u3011can be selected for the scale position. When the direction of the Linear Meter is \u3010Leftward\u3011or\u3010Rightward\u3011,\u3010Top\u3011or\u3010Bottom\u3011can be selected for the scale position.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.9.4 \u3010Range\u3011<\/h5>\n<p>The\u3010Linear Meter\u3011\u3010Range\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-176.png\" \/><\/p>\n<p>Figure 290\u3010Range\u3011Setting Screen of\u3010Linear Meter\u3011<\/p>\n<p>Table 157\u3010Range\u3011Setting Properties of\u3010Linear Meter\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Range Display\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Select if the color for the indicator of the Linear Meter will be changed according to the contents of the monitored address.<\/p>\n<p>\u3010Dynamic Range\u3011<\/p>\n<p>Select to allow a maximum and minimum value for the display range to change according to the contents of the specified address.<\/p>\n<p><strong>Note: When\u3010Dynamic Range\u3011is selected, the content value of the upper limit address must be greater than the content value of the lower limit address in order for the color of the indicator to change accordingly.<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Upper Limit\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Display\u3011<\/p>\n<p>Set the color of the upper limit range.<\/p>\n<p>\u3010Value\u3011<\/p>\n<p>Set the value of the upper limit. When\u3010Dynamic Range\u3011is selected, the address of the upper limit value will be set.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Lower Limit\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Display\u3011<\/p>\n<p>Set the color of the lower limit range.<\/p>\n<p>\u3010Value\u3011<\/p>\n<p>Set the value of the lower limit. When\u3010Dynamic Range\u3011is selected, the address of the lower limit value will be set.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h4>19.4.10 \u3010Circular Graph\u3011<\/h4>\n<p>Circular Graph can read the specified register address value, and display the value as circular.<\/p>\n<h5>19.4.10.1 \u3010General\u3011<\/h5>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-177.png\" \/><\/p>\n<p>Figure 291\u3010General\u3011Setting Screen on\u3010Circular Graph\u3011<\/p>\n<p>Table 158\u3010General\u3011Setting Properties of\u3010Circular Graph\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Preview\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Preview the appearance of this object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Name\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The default name of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Comment\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the comment of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Update\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Provide user can select a suitable speed to get the latest data under different situation, such as you would like to get the latest data or adjust the object on the screen to display first, etc.<\/p>\n<p>Provide three modes:<\/p>\n<p>\u3010once\u3011: update once only when switch to this page or use the system tag\u3010OP_UPDATE_SCREEN_OBJECTS\u3011, update once when trigger once a time, it will keep update if the monitor address is internal address.<\/p>\n<p>\u3010normal\u3011: normal update speed.<\/p>\n<p>\u3010fast\u3011: the fastest update speed.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Monitor Address\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Address\u3011<\/p>\n<p>Set the monitor address to read<\/p>\n<p>\u3010Data Type\u3011<\/p>\n<p>Set the data type of the reading monitor address<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Source Range\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Dynamic Range\u3011<\/p>\n<p>Set the specified address of the maximum and minimum to change dynamically.<\/p>\n<p>\u3010Max\u3011<\/p>\n<p>Set the maximum value. If\u3010Dynamic Range\u3011is checked, then set the address to control.<\/p>\n<p>\u3010Min\u3011<\/p>\n<p>Set the minimum value. If\u3010Dynamic Range\u3011is checked, then set the address to control.<\/p>\n<p><strong>Note: If\u3010Dynamic Range\u3011is checked, the maimum value must greater than the minimum value, the display range can be changed.<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Post Processing\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010None\u3011<\/p>\n<p>This object does not use post-processing functions.<\/p>\n<p>\u3010Gain\/Offset\u3011<\/p>\n<p>Set the value of gain and offset<\/p>\n<p>\u3010Max.\/Min.\u3011<\/p>\n<p>Set the ratio of reading source address and display.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.10.2 \u3010Display\u3011<\/h5>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-178.png\" \/><\/p>\n<p>Figure 292\u3010Display\u3011Setting Screen on\u3010Circular Graph\u3011<\/p>\n<p>Table 159\u3010Display\u3011Setting Properties of\u3010Circular Graph\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Shape\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the changing direction of the circular indicator area.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Direction\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the changing direction. There are two directions, [clockwise(CW)] and [counterclockwise(CCW)].<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Full Circle\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set whether to the change range of the display area to a full circle.<\/p>\n<p>If [No], the range of change is from [Start Angle] to [End Angle].<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Start Angle\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the starting angle of the circular indicator area.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010End Angle\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the end angle of the circular indicator area.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Band Width\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the width ratio of the circular belt, the ratio range is 5%~100%.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Indicator\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Background\u3011<\/p>\n<p>The background color setting of the indicator area.<\/p>\n<p>\u3010Display\u3011<\/p>\n<p>The display color setting of the indicator area.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Border\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Border color setting<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Background\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Background color and fill setting<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.10.3 \u3010Scale\u3011<\/h5>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-179.png\" \/><\/p>\n<p>Figure 293\u3010Scale\u3011Setting Screen on\u3010Circular Graph\u3011<\/p>\n<p>Table 160\u3010Scale\u3011Setting Properties of\u3010Circular Graph\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Scale\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Color\u3011<\/p>\n<p>Set the scale color<\/p>\n<p>\u3010Major Number\u3011<\/p>\n<p>Set the scale major number<\/p>\n<p>\u3010Sub Number\u3011<\/p>\n<p>Set the scale sub number<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Text\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Style\u3011<\/p>\n<p>Provides\u3010Radial\u3011and\u3010Normal\u30112 types<\/p>\n<p>\u3010Font\u3011<\/p>\n<p>Set the text font displayed on the bar graph scale<\/p>\n<p>\u3010Format\u3011<\/p>\n<p>Set the text format displayed on the bar graph scale, including bold, italic and underline<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the text color displayed on the bar graph scale<\/p>\n<p>\u3010Auto Fit Size\u3011<\/p>\n<p>The text size displayed by the bar graph scale is automatically adjusted according to the size of the object, if it is not checked, it can be adjusted manually<\/p>\n<p>\u3010Precision\u3011<\/p>\n<p>Set the decimal point position of the bar graph scale<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Scale Position\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>When the user sets the direction of the bar graph to\u3010up\u3011or\u3010down\u3011, the scale position can be selected from\u3010Left\u3011 or\u3010Right\u3011; on the contrary, when the direction of the bar graph is\u3010Left\u3011or\u3010Right\u3011, the scale The position can be selected from\u3010up\u3011or\u3010down\u3011.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.10.4 \u3010Range\u3011<\/h5>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-180.png\" \/><\/p>\n<p>Figure 294\u3010Range\u3011Setting Screen on\u3010Circular Graph\u3011<\/p>\n<p>Table 161\u3010Range\u3011Setting Properties of\u3010Circular Graph\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Range Display\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Check\u3010Dynamic Range\u3011to indicate whether the color of the indicator area of the bar graph changes with the content of the monitoring address.<\/p>\n<p>\u3010Dynamic Range\u3011<\/p>\n<p>The checked range shows whether the upper and lower limits can be changed with the content of the specified address.<\/p>\n<p><strong>Note: When\u3010Dynamic Range\u3011is checked, the upper limit address content value must be greater than the lower limit address content value, and the color of the indicator area can be changed accordingly.<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Upper Limit\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Display\u3011<\/p>\n<p>Set the upper range color<\/p>\n<p>\u3010Value\u3011<\/p>\n<p>Set the upper limit value. When\u3010Dynamic Range\u3011is checked, the address of the upper limit value is set.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Low Limit\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Display\u3011<\/p>\n<p>Set the lower limit range color<\/p>\n<p>\u3010Value\u3011<\/p>\n<p>Set the lower limit value. When\u3010Dynamic Range\u3011is checked, the address of the lower limit value is set.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h4>19.4.11 \u3010Pie Chart\u3011<\/h4>\n<p>It can read the value of a specific continuous register, and display the proportion of the multiple values read in the fo<\/p>\n<h5>19.4.11.1 \u3010General\u3011<\/h5>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-181.png\" \/><\/p>\n<p>Figure 295\u3010General\u3011Setting Screen on\u3010Pie Chart\u3011<\/p>\n<p>Table 162\u3010General\u3011Setting Properties of\u3010Pie Chart\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Preview\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Preview the appearance of this object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Name\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The default name of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Comment\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the comment of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Basic\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>\u3010Source\u3011<\/strong><\/p>\n<p>Set the type of data source to read from the pie chart, there are two type:\u3010Value\u3011and\u3010Percentage\u3011.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-182.png\" \/><\/p>\n<p>When\u3010Percentage\u3011is selected, the distribution of the pie chart will be displayed proportionally. If the total exceeds 100%, the pie chart will display Error.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-183.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-184.png\" \/><\/p>\n<p><strong>\u3010Number of Items\u3011<\/strong><\/p>\n<p>Set the number of data items for the pie chart.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Monitor Address\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>\u3010Address\u3011<\/strong><\/p>\n<p>Set the read address of the pie chart monitor.<\/p>\n<p><strong>\u3010Data Type\u3011<\/strong><\/p>\n<p>Set the number of data items for the pie chart.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.11.2 \u3010Display\u3011<\/h5>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-185.png\" \/><\/p>\n<p>Figure 296\u3010Display\u3011Setting Screen on\u3010Pie Chart\u3011<\/p>\n<p>Table 163\u3010Display\u3011Setting Properties of\u3010Pie Chart\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Shape\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Direction\u3011<\/p>\n<p>Set the direction to display each items, includes\u3010CW\u3011and\u3010CCW\u3011.<\/p>\n<p>\u3010Center of Circle\u3011<\/p>\n<p>Set the center size of the circle.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Data Display\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Display Type\u3011<\/p>\n<p>Set the font type of the pie chart to display the data, includes\u3010None\u3011,\u3010Value\u3011,\u3010Percentage\u3011.<\/p>\n<p>\u3010Auto Fit Size\u3011<\/p>\n<p>Auto adjust the font size according to the object size, it can be manual adjusted if this option is not enabled.<\/p>\n<p>\u3010Sort from largest to smallest\u3011<\/p>\n<p>Set the sorting of the data items of the pie chart, whether to sorting by the value of the data.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Border\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Color\u3011<\/p>\n<p>Set the color of the pie chart border.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.11.3 \u3010Slice Display\u3011<\/h5>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-186.png\" \/><\/p>\n<p>Figure 297\u3010Slice Display\u3011Setting Screen on\u3010Pie Chart\u3011<\/p>\n<p>Table 164\u3010Slice Display\u3011Setting Properties of\u3010Pie Chart\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Item\u3011<\/p>\n<\/td>\n<td>\n<p>Switches the currently edited data item.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Item Text\u3011<\/p>\n<\/td>\n<td>\n<p>\u3010Font\u3011<\/p>\n<p>Set the text font displayed in the currently edited item.<\/p>\n<p>\u3010Format\u3011<\/p>\n<p>Set the text format displayed in the current editing item, including bold, italic and underline.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the text color displayed in the currently edited item.<\/p>\n<p>\u3010Item Name\u3011<\/p>\n<p>Set the item name to be displayed for the currently edited project.<\/p>\n<p>\u3010Copy to all items\u3011<\/p>\n<p>Apply the text property settings of the currently edited item to all items.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Background\u3011<\/p>\n<\/td>\n<td>\n<p>\u3010Color\u3011Sets the slice background color for data items.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h4>19.4.12 \u3010Data Block Graph\u3011<\/h4>\n<p>\u3010Data Block Graph\u3011is an object used to display curves, in which the x value of the curve uses continuous data values from a specified address as the source, and the y value is derived from the contents of the continuous data. Its main functions are as follows:<\/p>\n<ul>\n<li>Read the continuous data of a specified address directly.<\/li>\n<li>Pauses or starts updating the reading of the continuous data of a specified address through the\u3010Sub Switch\u3011, and clearing the displayed data. It can also temporarily preserve the old curve (persistence) for comparison purposes.<\/li>\n<\/ul>\n<p>Introduction to the\u3010Data Block Graph\u3011property settings dialog box are as follows:<\/p>\n<h5>19.4.12.1  \u3010General\u3011<\/h5>\n<p>The\u3010Data Block Graph\u3011\u3010General\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-187.png\" \/><\/p>\n<p>Figure 298\u3010General\u3011Setting Screen on\u3010Data Block Graph\u3011<\/p>\n<p>Table 165\u3010General\u3011Setting Properties of\u3010Data Block Graph\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Preview\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Preview the appearance of this object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Name\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The default name of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Comment\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the comment of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Basic\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010No. of Data per Curve\u3011<\/p>\n<p>Set the amount of data per curve, which is the number of dots per curve.<\/p>\n<p>\u3010Mode\u3011<\/p>\n<p>Set the mode of data curve operation, you can choose \u3010Data Block\u3011or\u3010ECG\u3011.<\/p>\n<p>\u3010Update Mode\u3011<\/p>\n<p>Set the update mode, includes\u3010Period\u3011and\u3010Bit Trigger\u3011.<\/p>\n<p>\u3010Period\u3011<\/p>\n<p>Set the curve to be updated at a period time when it is display, set the period time of each curves after the option was checked.<\/p>\n<p>\u3010Bit Trigger\u3011<\/p>\n<p>Set the curve to be updated by trigger a bit when it is display, set the address of trigger bit of each curves after the option was checked.<\/p>\n<p>\u3010Direction Type\u3011<\/p>\n<p>Support 4 types: RightUp, LeftUp, RightDown, and LeftDown.<\/p>\n<p>\u3010Two Y Axes Mode\u3011<\/p>\n<p>Select to display two y axes on the graph.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Global Display Range\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Represents the range that can be displayed.<\/p>\n<p>\u3010Min\u3011<\/p>\n<p>Set the minimum Global Range value for the Y-axis.<\/p>\n<p>\u3010Max\u3011<\/p>\n<p>Set the maximum Global Range value for the Y-axis.<\/p>\n<p><strong>Note: The\u3010Global Display Range\u3011represents the range that can be displayed. If\u3010Max\u3011is 100 and\u3010Min\u3011is 0, data exceeding this range will not be able to be displayed.<\/strong><\/p>\n<p>\u3010Display Precision\u3011<\/p>\n<p>Set the number of decimal places the labels display.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.12.2  \u3010Curve\u3011<\/h5>\n<p>The\u3010Data Block Graph\u3011\u3010Curve\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p> <img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-188.png\" \/><\/p>\n<p>Figure 299\u3010Curve\u3011Setting Screen on\u3010Data Block Graph\u3011<\/p>\n<p>Table 166\u3010Curve\u3011Setting Properties of\u3010Data Block Graph\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Curves\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010No. of Curves\u3011<\/p>\n<p>Set the number of curves. The maximum is 32.<\/p>\n<p>\u3010No. of Curves (ECG)\u3011<\/p>\n<p>When\u3010ECG\u3011is selected, the curve will become 2 lines as a group, starting from curves 0-0, 0-1, the next group will be curves 1-0, 1-1, and so on, can be established in total 32 ECG curves (16 groups).<\/p>\n<p>\u3010Visibility Mask\u3011<\/p>\n<p>Select to use a visibility mask to control the visibility of the each curve. The user should assign a <strong>32Bit-UINT<\/strong> register as the mask such that the 0 bit controls the display of curve 0, the 1 but controls the display of curve 1, and so on.<\/p>\n<p>\u3010Visibility Mask (ECG)\u3011<\/p>\n<p>When selecting the\u3010ECG\u3011, the user needs to set a register with a <strong>16Bit-UINT<\/strong> data type. The 0th bit controls the visibility of the 0-0 and 0-1 curves, and the 1st bit controls the visibility of the 1-0 and 1-1 curves, and so on.<\/p>\n<p>\u3010Display Range\u3011<\/p>\n<p>Set the display mode for the display range of the curve. It is one of the two following types: <\/p>\n<ul>\n<li>\u3010Global\u3011<\/li>\n<\/ul>\n<p>The display ranges of all the curves are identical to the\u3010Global Display Range\u3011.<\/p>\n<ul>\n<li>\u3010Individual\u3011<\/li>\n<\/ul>\n<p>The display range of all the curves can be different from the\u3010Global Display Range\u3011.<\/p>\n<p><strong>Explanation: When to set\u3010Display Range\u3011as\u3010Individual\u3011-When the value ranges of the number of curves are different, for example when the value range of curve a is 0~10, and curve b is 0~1000, it can be discovered that the degree of changes for curve a will be difficult to observe if the two curves are placed in the same figure. This is when\u3010Display Range\u3011can be set as\u3010Individual\u3011and the display range of each curve can be defined; the system will automatically zoom the value of the curves according to the value in\u3010Global Display Range\u3011. Take this case for example, <\/strong><\/p>\n<p><strong>If the value in\u3010Global Display Range\u3011is 0~100, when the value of curve a is 5, the system will zoom it to 50; and when the value of curve b is 500, the system will also zoom it into 50, and so on.<\/strong><\/p>\n<p>The parameters for curve properties in the table are as follows:<\/p>\n<p>\u3010Y Start Address\u3011<\/p>\n<p>Set the starting address for the source of the Y value of the curve. <\/p>\n<p>\u3010Y Data Type\u3011<\/p>\n<p>Set the data type for the Y value of the curve. <\/p>\n<p><strong>Explanation: The range of the curve reading address is determined by the\u3010No. of Data per Curve\u3011, \u3010Start Address\u3011 and\u3010Data Type\u3011; users can determine the range by looking at the following example.<\/strong><\/p>\n<ul>\n<li><strong>Example 1:<\/strong><\/li>\n<\/ul>\n<p><strong>\u3010No. of Data per Curve\u3011= 3; Y-axis\u3010Start Address\u3011@0:R0; Y-axis\u3010Data Type\u3011=16Bit-UINT<\/strong><\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Dot<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>X value<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Y value<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>0<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>0<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>@0:R0<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>1<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>1<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>@0:R1<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>2<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>2<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>@0:R2<\/strong><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<ul>\n<li><strong>Example 2:<\/strong><\/li>\n<\/ul>\n<p><strong>\u3010No. of Data per Curve\u3011= 3; Y-axis\u3010Start Address\u3011=$U:V0; Y Y-axis\u3010Data Type\u3011=32Bit-UINT<\/strong><\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Dot<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>X value<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Y value<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>0<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>0<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>@0:R0@0:R1<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>1<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>1<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>@0:R2@0:R3<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>2<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>2<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>@0:R4~@0:R5<\/strong><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>\u3010Display Name\u3011<\/p>\n<p>The name of the curve to display on the graph.<\/p>\n<p>\u3010Y Max\u3011<\/p>\n<p>Set the maximum Individual Display Range value for the Y value of the curve, if\u3010Display Range\u3011is\u3010Individual\u3011<\/p>\n<p>\u3010Y Min\u3011<\/p>\n<p>Set the minimum Individual Display Range value for the Y-axis, if\u3010Display Range\u3011is\u3010Individual\u3011.<\/p>\n<p>\u3010Cursor Display\u3011<\/p>\n<p>Four options are available: None, Scale Data, Original Data, and Both. For example, if the\u3010Global Display Range\u3011was set to 0~100, the\u3010Display Range\u3011was set to individual,\u3010Y Max\u3011is set to 200 and\u3010Y Min\u3011is set to 0, when Y is 60, the cursor is set such that the scaled value of 30 is displayed. If the\u3010Cursor Display\u3011is set to orginal, the original value of 60 is displayed.<\/p>\n<p>\u3010Y Axis\u3011<\/p>\n<p>If\u3010Two Y Axes Mode\u3011is selected, the setting is used to decide the curve\u2019s reference y-axis.<\/p>\n<p>\u3010Line\u3011<\/p>\n<p>Select whether to display the curve line.<\/p>\n<p>\u3010Line Color\u3011<\/p>\n<p>Set the color of the curve.<\/p>\n<p>\u3010Line Type\u3011<\/p>\n<p>Set the line type of curve, including solid, dash, dot, dash dot, dash dot dot, etc.<\/p>\n<p>\u3010Line width\u3011<\/p>\n<p>Set the width of the curve.<\/p>\n<p>\u3010Symbol\u3011<\/p>\n<p>Select to display the curve symbols. <\/p>\n<p>\u3010Symbol Color\u3011<\/p>\n<p>Set the color of the symbols. <\/p>\n<p>\u3010Symbol Type\u3011<\/p>\n<p>Set the symbol type.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.12.3 \u3010Advanced Curve\u3011<\/h5>\n<p>The\u3010Data Block Graph\u3011\u3010Advanced Curve\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-189.png\" \/><\/p>\n<p>Figure 300\u3010Advanced Curve\u3011Setting Screen of\u3010Data Block Graph\u3011<\/p>\n<p>Table 167\u3010Advanced Curve\u3011Setting Properties of\u3010Data Block Graph\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Advnaced Curve Display Mode\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Select to enable the advanced curve display mode.<\/p>\n<p>\u3010Mode\u3011<\/p>\n<p>There are four filter modes for setting the curve display, which are:<\/p>\n<p>\u3010Single Value Filter Mode (&gt;=)\u3011Display all curves greater than or equal to the filtered value.<\/p>\n<p>\u3010Single Value Filter Mode (&gt;)\u3011Display all curves greater than the filtered value.<\/p>\n<p>\u3010Single Value Filter Mode (&lt;)\u3011Display all curves less than the filtered value.<\/p>\n<p>\u3010Single Value Filter Mode (&lt;=)\u3011Display all curves less than or equal to the filtered value.<\/p>\n<p>The following is an example:<\/p>\n<p>Select the mode\u3010Single Value Filter Mode (&gt;=)\u3011and set this value to 30.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-190.png\" \/> <img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-191.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Filter Value\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the filter value of the filter mode.<\/p>\n<p>\u3010Dynamic Range(32bit-FLOAT)\u3011<\/p>\n<p>Check whether the filter value can be changed according to the content of the specified address. The data type is 32-bit floating point.<\/p>\n<p>\u3010Y Axis (Left)\u3011<\/p>\n<p>Set the filter value of the left Y axis.<\/p>\n<p>\u3010Y Axis (Right)\u3011<\/p>\n<p>Set the right Y-axis filter value (this setting can only be set when\u3010Two Y Axes Mode\u3011is checked).<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.12.4 \u3010Display\u3011<\/h5>\n<p>The\u3010Data Block Graph\u3011\u3010Display\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-192.png\" \/><\/p>\n<p>Figure 301\u3010Display\u3011Setting Screen of\u3010Data Block Graph\u3011<\/p>\n<p>Table 168\u3010Display\u3011Setting Properties of\u3010Data Block Graph\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Border\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Select to display the border.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the color of the border.<\/p>\n<p>\u3010Type\u3011<\/p>\n<p>Set the border type.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Background\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Select to display the background.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the color of the background.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Graph Background\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Select to display the graph background.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the color of the graph background.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Cursor\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Select to display the cursor.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the color of the cursor.<\/p>\n<p>\u3010Show Cursor and Curve Value\u3011<\/p>\n<p>Select to display the value of cursor and curve.<\/p>\n<p>\u3010Show Cursor and Curve Value\u3011\u3010Display\u3011<\/p>\n<p>Set the visibility of the values. If\u3010Always\u3011is set, the values are always shown. If\u3010Controlled by Bit\u3011is selected, the visibility depends on the specified bit.<\/p>\n<p>\u3010Show Curve Name\u3011<\/p>\n<p>Select to display the curve name.<\/p>\n<p>\u3010Show Curve Name\u3011\u3010Display\u3011<\/p>\n<p>Set the visibility of the curve name. If\u3010Always\u3011is set, the curve name is always shown. If\u3010Controlled by Bit\u3011 is selected, the visibility of the curve name depends on the specified bit.<\/p>\n<p>\u3010Font\u3011<\/p>\n<p>Set the font and size of the cursor value.<\/p>\n<p>\u3010Background\u3011<\/p>\n<p>Set the background color of the cursor value.<\/p>\n<p>\u3010Text\u3011<\/p>\n<p>Set the text color of the cursor value.<\/p>\n<p>\u3010Opacity\u3011<\/p>\n<p>Set the background opacity of the cursor value.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.12.5 \u3010Axis\u3011<\/h5>\n<p>The\u3010Data Block Graph\u3011\u3010Axis\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-193.png\" \/><\/p>\n<p>Figure 302\u3010Axis\u3011Setting Screen of\u3010Data Block Graph\u3011<\/p>\n<p>Table 169\u3010Axis\u3011Setting Properties of\u3010Data Block Graph\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Common\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Axis Color\u3011<\/p>\n<p>Set the color of the axis.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010X-axis\u3011 \u3010Division\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Number of Major Division\u3011<\/p>\n<p>Set the number of major divisions for the X-axis.<\/p>\n<p>\u3010Number of Sub Division\u3011<\/p>\n<p>Set the number of sub divisions for the X-axis.<\/p>\n<p>\u3010Show Tick\u3011<\/p>\n<p>Select to display the ticks.<\/p>\n<p>\u3010Show Value\u3011<\/p>\n<p>Select to display the values on the X-axis.<\/p>\n<p>\u3010Value\/Tick Color\u3011<\/p>\n<p>Set the colors of the values and ticks.<\/p>\n<p>\u3010Show Grid\u3011<\/p>\n<p>Select to display vertical gridlines and set the color of the gridlines.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Y-axis\u3011 \u3010Division\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Number of Major Division\u3011<\/p>\n<p>Set the number of major divisions for the Y-axis.<\/p>\n<p>\u3010Number of Sub Division\u3011<\/p>\n<p>Set the number of sub divisions for the Y-axis.<\/p>\n<p>\u3010Show Tick\u3011<\/p>\n<p>Select whether to display the tick on the Y-axis.<\/p>\n<p>\u3010Show Value\u3011<\/p>\n<p>Select to display the values on the Y-axis.<\/p>\n<p>\u3010Value\/Tick Color\u3011<\/p>\n<p>Set the colors of the values and ticks.<\/p>\n<p>\u3010Show Grid\u3011<\/p>\n<p>Select to display horizontal gridlines and sets the color of the gridlines.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Y-axis\u3011 \u3010Position\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Position\u3011<\/p>\n<p>Set the Y-axis position.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.12.6  \u3010Advanced\u3011<\/h5>\n<p>The\u3010Data Block Graph\u3011\u3010Advanced\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p> <img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-194.png\" \/><\/p>\n<p>Figure 303\u3010Advanced\u3011Setting Screen of\u3010Data Block Graph\u3011<\/p>\n<p>Table 170\u3010Advanced\u3011Setting Properties of\u3010Data Block Graph\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Advanced\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Start\/Stop State Address\u3011<\/p>\n<p>Set such that the\u3010Data Block Graph\u3011will start\/stop at the specified address. Only the display unit\u2019s internal memory is supported.<\/p>\n<p>A value of 0 specifies the start state. A value of 1 specifies the stop state.<\/p>\n<p>\u3010The initial state is stopped\u3011<\/p>\n<p>Check whether to set the\u3010Data Block Graph\u3011initial state to stop state.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Register Control\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010X Axis Scale\u3011<\/p>\n<p>X axis scale numbers can be specified by register, it will appear register setting below after checked, and will display the number of consecutive occupancy registers, this register is in 16 Bit-UINT format, table as below.<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Word<\/p>\n<\/td>\n<td>\n<p>Description<\/p>\n<\/td>\n<td>\n<p>Data Type<\/p>\n<\/td>\n<td>\n<p>Min.<\/p>\n<\/td>\n<td>\n<p>Max.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>0<\/p>\n<\/td>\n<td>\n<p>Number of Major Division<\/p>\n<\/td>\n<td>\n<p>16Bit-UINT<\/p>\n<\/td>\n<td>\n<p>1<\/p>\n<\/td>\n<td>\n<p>30<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>1<\/p>\n<\/td>\n<td>\n<p>Number of Sub Division<\/p>\n<\/td>\n<td>\n<p>16Bit-UINT<\/p>\n<\/td>\n<td>\n<p>1<\/p>\n<\/td>\n<td>\n<p>30<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>\u3010Y Axis Scale\u3011<\/p>\n<p>Y axis scale numbers can be specified by register, it will appear register setting below after checked, and will display the number of consecutive occupancy registers, this register is in 16 Bit-UINT format, table as below.<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Word<\/p>\n<\/td>\n<td>\n<p>Description<\/p>\n<\/td>\n<td>\n<p>Data Type<\/p>\n<\/td>\n<td>\n<p>Min.<\/p>\n<\/td>\n<td>\n<p>Max.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>0<\/p>\n<\/td>\n<td>\n<p>Number of Major Division<\/p>\n<\/td>\n<td>\n<p>16Bit-UINT<\/p>\n<\/td>\n<td>\n<p>1<\/p>\n<\/td>\n<td>\n<p>30<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>1<\/p>\n<\/td>\n<td>\n<p>Number of Sub Division<\/p>\n<\/td>\n<td>\n<p>16Bit-UINT<\/p>\n<\/td>\n<td>\n<p>1<\/p>\n<\/td>\n<td>\n<p>30<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>\u3010X Axis Range\u3011<\/p>\n<p>X axis range can be specified by register, it will appear register setting below after checked, and will display the number of consecutive occupancy registers, table as below.<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Word<\/p>\n<\/td>\n<td>\n<p>Description<\/p>\n<\/td>\n<td>\n<p>Data Type<\/p>\n<\/td>\n<td>\n<p>Min.<\/p>\n<\/td>\n<td>\n<p>Max.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>0 &amp; 1<\/p>\n<\/td>\n<td>\n<p>Maximum<\/p>\n<p>value of x axis.<\/p>\n<\/td>\n<td>\n<p>32Bit-INT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>2 &amp; 3<\/p>\n<\/td>\n<td>\n<p>Minimum value of x axis.<\/p>\n<\/td>\n<td>\n<p>32Bit-INT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><strong>Note: The X-axis range of\u3010ECG\u3011is\u3010No. of Data per Curve\u3011, and dynamic adjustment is not supported.<\/strong><\/p>\n<p>\u3010Y Axis Range\u3011<\/p>\n<p>Y axis range can be specified by register, it will appear register setting below after checked, and will display the number of consecutive occupancy registers, table as below.<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Word<\/p>\n<\/td>\n<td>\n<p>Description<\/p>\n<\/td>\n<td>\n<p>Data Type<\/p>\n<\/td>\n<td>\n<p>Min.<\/p>\n<\/td>\n<td>\n<p>Max.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>0 &amp; 1<\/p>\n<\/td>\n<td>\n<p>The maximum of the Y-axis on the left side of the graph<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>2 &amp; 3<\/p>\n<\/td>\n<td>\n<p>The minimum of the Y-axis on the left side of the graph<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>4<\/p>\n<\/td>\n<td>\n<p>Decimal point position of the Y-axis value on the left side of the graph<\/p>\n<\/td>\n<td>\n<p>16Bit-UINT<\/p>\n<\/td>\n<td>\n<p>0<\/p>\n<\/td>\n<td>\n<p>5<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>5 &amp; 6<\/p>\n<\/td>\n<td>\n<p>The maximum of the Y-axis on the right side of the graph<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>7 &amp; 8<\/p>\n<\/td>\n<td>\n<p>The minimum of the Y-axis on the right side of the graph<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>9<\/p>\n<\/td>\n<td>\n<p>Decimal point position of the Y-axis value on the right side of the graph<\/p>\n<\/td>\n<td>\n<p>16Bit-UINT<\/p>\n<\/td>\n<td>\n<p>0<\/p>\n<\/td>\n<td>\n<p>5<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><strong>Note: maximum value should bigger than minimum value.<\/strong><\/p>\n<p>\u3010Curves\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Word<\/p>\n<\/td>\n<td>\n<p>Description<\/p>\n<\/td>\n<td>\n<p>Data Type<\/p>\n<\/td>\n<td>\n<p>Min.<\/p>\n<\/td>\n<td>\n<p>Max.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>0 &amp; 1<\/p>\n<\/td>\n<td>\n<p>Max. value of curve 0.<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>2 &amp; 3<\/p>\n<\/td>\n<td>\n<p>Min. value of curve 0.<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>4 &amp; 5<\/p>\n<\/td>\n<td>\n<p>Max. value of curve 1.<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>6 &amp; 7<\/p>\n<\/td>\n<td>\n<p>Min. value of curve 1.<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>8 &amp; 9<\/p>\n<\/td>\n<td>\n<p>Max. value of curve 2.<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>10 &amp; 11<\/p>\n<\/td>\n<td>\n<p>Min. value of curve 2.<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u2026<\/p>\n<\/td>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td>\n<p>124 &amp; 125<\/p>\n<\/td>\n<td>\n<p>Max. value of curve 31.<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>126 &amp; 127<\/p>\n<\/td>\n<td>\n<p>Min. value of curve 31.<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><strong>Note: maximum value should bigger than minimum value.<\/strong><\/p>\n<p>\u3010Curves (ECG)\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Word<\/p>\n<\/td>\n<td>\n<p>Description<\/p>\n<\/td>\n<td>\n<p>Data Type<\/p>\n<\/td>\n<td>\n<p>Min.<\/p>\n<\/td>\n<td>\n<p>Max.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>0 &amp; 1<\/p>\n<\/td>\n<td>\n<p>Max. value of curve 0-0 and 0-1.<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>2 &amp; 3<\/p>\n<\/td>\n<td>\n<p>Min. value value of curve 0-0 and 0-1.<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>4 &amp; 5<\/p>\n<\/td>\n<td>\n<p>Max. value of curve 1-0 and 1-1.<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>6 &amp; 7<\/p>\n<\/td>\n<td>\n<p>Min. value value of curve 1-0 and 1-1.<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>8 &amp; 9<\/p>\n<\/td>\n<td>\n<p>Max. value of curve 2-0 and 2-1.<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>10 &amp; 11<\/p>\n<\/td>\n<td>\n<p>Min. value of curve 2-0 and 2-1.<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u2026<\/p>\n<\/td>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td>\n<p>60 &amp; 61<\/p>\n<\/td>\n<td>\n<p>Max. value value of curve 15-0 and 15-1.<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>62 &amp; 63<\/p>\n<\/td>\n<td>\n<p>Min. value value of curve 15-0 and 15-1.<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><strong>Note: maximum value should bigger than minimum value.<\/strong><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.12.7 \u3010Sub Switch\u3011<\/h5>\n<p>The\u3010Data Block Graph\u3011\u3010Sub Switch\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-195.png\" \/><\/p>\n<p>Figure 304\u3010Sub Switch\u3011Setting Screen of\u3010Data Block Graph\u3011<\/p>\n<p>Table 171\u3010Sub Switch\u3011Setting Properties of\u3010Data Block Graph\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Sub Switch List\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Sub Switch List\u3011that can be selected for\u3010Data Block Graph\u3011. Sub switches can be enabled after selecting them. Settings for the appearance of the selected sub switches will also appear on the right. <\/p>\n<p>When different sub switches are selected from the list, the  appearance settings to the right will be updated according to the sub switches selected.<\/p>\n<p>In which the (Sub Switches) are divided into:<\/p>\n<ul>\n<li>\u3010Start\u3011\u2014Start updating curve.<\/li>\n<li>\u3010Stop\u3011\u2014Stop updating curve.<\/li>\n<li>\u3010Clear\u3011\u2014Clear curve.<\/li>\n<li>\u3010Hor. Zoom In\u3011\u2014Horizontal zoom in.<\/li>\n<li>\u3010Hor. Zoom Out\u3011\u2014Horizontal zoom out.<\/li>\n<li>\u3010Ver. Zoom In\u3011\u2014Vertical zoom in.<\/li>\n<li>\u3010Ver. Zoom Out\u3011\u2014Vertical zoom out.<\/li>\n<li>\u3010Move Left\u3011\u2014Move Left.<\/li>\n<li>\u3010Move Right\u3011\u2014Move Right.<\/li>\n<li>\u3010Move Up\u3011\u2014Move Up.<\/li>\n<li>\u3010Move Down\u3011\u2014Move Down.<\/li>\n<li>\u3010Persistence On\u3011-Preserve old curves ON; used for comparing curves. The color of old curves will be darker than the original ones.<\/li>\n<li>\u3010Persistence Off\u3011-Preserve old curves OFF; clears all old curves.<\/li>\n<\/ul>\n<p>Some sub switches are <strong>not supported<\/strong> under\u3010ECG\u3011, as follow:<\/p>\n<p>\u3010Hor. Zoom In\u3011,\u3010Hor. Zoom Out\u3011,\u3010Move Left\u3011,\u3010Move Right\u3011,\u3010Persistence On\u3011,\u3010Persistence Off\u3011.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Display\u3011\u3010Text\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Direct Text Font\u3011<\/p>\n<p>Set the text font of the sub switch currently selected.<\/p>\n<p>\u3010Direct Text Size\u3011<\/p>\n<p>Set the text size of the sub switch currently selected.<\/p>\n<p>\u3010Position\u3011<\/p>\n<p>Set the text position of the sub switch currently selected.<\/p>\n<p>\u3010Format\u3011<\/p>\n<p>Set the text format of the sub switch currently selected, including Bold, Italics and Underline.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the text color of the sub switch currently selected.<\/p>\n<p>\u3010Content(Direct Text)\u3011<\/p>\n<p>Set the text of the sub switch currently selected.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Display\u3011\u3010Background\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the background of the sub switch currently selected. Check it to activate background settings, and the displayed background of the sub switch currently selected can be edited below. If this option is not checked, the background will be transparent.<\/p>\n<p>\u3010Use Image\u3011<\/p>\n<p>Set to use an image for the background of the sub switch currently selected. When this option is checked, image selection settings will appear asking the user to select an image either from the\u3010Image Library\u3011or from a file.<\/p>\n<p>\u3010Background Color\u3011<\/p>\n<p>Set the background color of the sub switch currently selected. This setting item will appear if \u3010Use Image\u3011was not selected. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Display\u3011\u3010while Pressing\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Play Audio\u3011<\/p>\n<p>Select to play audio when the sub switch is pressed. An\u3010Audio Selector\u3011will appear on the right when enabled. The switch on the right of the\u3010Audio Selector\u3011can be pressed to select an audio and the switch on the left of the\u3010Audio Selector\u3011can be pressed to play the selected audio. <\/p>\n<p>\u3010Pressing Effect\u3011<\/p>\n<p>Set the pressing effect of the sub switch currently selected. There are two effects available for selection:\u3010None\u3011and\u3010Highlight\u3011.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Advanced\u3011\u3010Operation Control\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Operation control of sub switch, it can enabled by bit or security.<\/p>\n<p>\u3010Enable by Bit\u3011<\/p>\n<p>Check whether the sub switch operation is controlled by a bit<\/p>\n<p>\u3010Show Disabled Sign\u3011<\/p>\n<p>Check if you want to display the forbidden symbol, it\u2019s valid when check\u3010Enable by Bit\u3011,\u3010Enabled by Word\u3011or\u3010Enable by Security\u3011.<\/p>\n<p>\u3010Address\u3011<\/p>\n<p>Set the address of the sub switch operation control bit.<\/p>\n<p>\u3010State\u3011<\/p>\n<p>Set the control bit as 1 or 0 to operate object. <\/p>\n<p>\u3010Enabled by Word\u3011<\/p>\n<p>Check whether the operation is controlled by word.<\/p>\n<p>\u3010Address\u3011<\/p>\n<p>Set the operation control word address.<\/p>\n<p>\u3010Condition\u3011<\/p>\n<p>Set the condition of word control and when it is true then the object can be controlled, when false not the object can not be controlled. The condition include\u2019 =\u2019,\u2019 !=\u2019, \u2018&gt;\u2019, \u2018&lt;\u2019, \u2018&gt;=\u2019, \u2018&lt;=\u2019.<\/p>\n<p>\u3010Enable by Security\u3011<\/p>\n<p>Select the sub switch whether controlled by user level.<\/p>\n<p>\u3010User Level Condition\u3011<\/p>\n<p>Set the level and condition of the object.<\/p>\n<p>\u3010Hold Time\u3011<\/p>\n<p>Check whether the operation is controlled by hold time. Hold time can be divided into two kinds:<\/p>\n<ul>\n<li>\u3010Press On\u3011: press directly, according to the\u3010Min. Hold Time\u3011to confirm whether the operation is executed.<\/li>\n<li>\u3010Double Press\u3011: quickly double press to confirm whether the operation is executed.<\/li>\n<\/ul>\n<p>\u3010Operator Confirm\u3011<\/p>\n<p>Check whether show comfirmation message window after checking the operation.<\/p>\n<p>\u3010Max. Waiting Time\u3011<\/p>\n<p>When the confirmation message window is displayed, If the user does not reply within this time, the system will close the confirmation message window and cancel this operation<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h4>19.4.13 \u3010Data Block XY Scatter\u3011<\/h4>\n<p>\u3010Data Block XY Scatter\u3011is an object used to display a curve, in which the sources of both X\/Y values are the continuous data contents of specified addresses. Its main functions are as follows:<\/p>\n<ul>\n<li>Read the continuous data of the specified addresses directly.<\/li>\n<li>Pauses or starts updating the reading of the continuous data of a specified address through the\u3010Sub Switch\u3011and clearing the displayed data. It can also temporarily preserve the old curve for comparison purposes.<\/li>\n<\/ul>\n<p>Introduction to the property setting dialog box are as follows:<\/p>\n<h5>19.4.13.1 \u3010General\u3011<\/h5>\n<p>The\u3010Data Block XY Scatter\u3011\u3010General\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-196.png\" \/><\/p>\n<p>Figure 305\u3010General\u3011 Setting Screen of \u3010Data Block XY Scatter\u3011<\/p>\n<p>Table 172\u3010General\u3011 Setting Properties of\u3010Data Block XY Scatter\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Preview\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Preview the appearance of this object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Name\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The default name of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Comment\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the comment of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Basic\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010No. of Data per Curve\u3011<\/p>\n<p>Set the amount of data per curve, which is the number of dots per curve.<\/p>\n<p>\u3010Update Mode\u3011<\/p>\n<p>Set the update mode, includes\u3010Period\u3011and\u3010Bit Trigger\u3011.<\/p>\n<p>\u3010Period\u3011<\/p>\n<p>Set the curve to be updated at a period time when it is display, set the period time of each curves after the option was checked.<\/p>\n<p>\u3010Bit Trigger\u3011<\/p>\n<p>Set the curve to be updated by trigger a bit when it is display, set the address of trigger bit of each curves after the option was checked.<\/p>\n<p>\u3010Direction Type\u3011<\/p>\n<p>Supprt 4 types: RightUp, LeftUp, RightDown, and LeftDown.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Global Display Range\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the range that can be displayed.<\/p>\n<p>\u3010Max\u3011<\/p>\n<p>Set the maximum Global Range value for the X-axis\/Y-axis.<\/p>\n<p>\u3010Min\u3011<\/p>\n<p>Set the minimum Global Range value for the X-axis\/Y-axis.<\/p>\n<p><strong>Note: The \u3010Global Display Range\u3011 represents the range that can be displayed. If\u3010Max\u3011is 100 and\u3010Min\u3011 is 0, data exceeding this range will not be able to be displayed.<\/strong><\/p>\n<p>\u3010Display Precision\u3011<\/p>\n<p>Set the number of decimal places the labels display.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.13.2 \u3010Curve\u3011<\/h5>\n<p>The\u3010Data Block XY Scatter\u3011\u3010Curve\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p> <img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-197.png\" \/><\/p>\n<p>Figure 306\u3010Curve\u3011Setting Screen of\u3010Data Block XY Scatter\u3011<\/p>\n<p>Table 173\u3010Curve\u3011Setting Properties of\u3010Data Block XY Scatter\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Curves\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010No. of Curves\u3011<\/p>\n<p>Set the number of curves. The maximum is 32.<\/p>\n<p>\u3010Visibility Mask\u3011<\/p>\n<p>Select to use a visibility mask to control the visibility of the each curve. The user should assign a 32bit UINT register as the mask such that the 0 bit controls the display of curve 0, the 1 but controls the display of curve 1, and so on.<\/p>\n<p>\u3010Display Range\u3011<\/p>\n<p>Set the display mode for the display range of the curve. It is one of the two following types: <\/p>\n<ul>\n<li>\u3010Global\u3011<\/li>\n<\/ul>\n<p>The display ranges of all the curves are identical to the\u3010Global Display Range\u3011.<\/p>\n<ul>\n<li>\u3010Individual\u3011<\/li>\n<\/ul>\n<p>The display range of all the curves can be different from the\u3010Global Display Range\u3011.<\/p>\n<p><strong>Explanation: When to set\u3010Display Range\u3011as\u3010Individual\u3011-When the value ranges of the number of curves are different, for example when the value range of curve a is 0~10, and curve b is 0~1000, it can be discovered that the degree of changes for curve a will be difficult to observe if the two curves are placed in the same figure. This is when\u3010Display Range\u3011can be set as\u3010Individual\u3011and the display range of each curve can be defined; the system will automatically zoom the value of the curves according to the value in\u3010Global Display Range\u3011. Take this case for example, <\/strong><\/p>\n<p><strong>If the value in\u3010Global Display Range\u3011is 0~100, when the value of curve a is 5, the system will zoom it to 50; and when the value of curve b is 500, the system will also zoom it into 50, and so on.<\/strong><\/p>\n<p>The  parameters for curve properties in the table are as follows:<\/p>\n<p>\u3010X\/Y Start Address\u3011<\/p>\n<p>Set the starting address for the source of the X\/Y value of the curve. <\/p>\n<p>\u3010XY Data Type\u3011<\/p>\n<p>Set the data type for the X\/Y value of the curve. <\/p>\n<p><strong>Explanation: The range of the curve reading address is determined by the\u3010No. of Data per Curve\u3011,\u3010Start Address\u3011and\u3010Data Type\u3011; users can determine the range by looking at the following example.<\/strong><\/p>\n<ul>\n<li><strong>Example 1:<\/strong><\/li>\n<\/ul>\n<p><strong>\u3010No. of Data per Curve\u3011= 3; Y-axis\u3010Start Address\u3011@0:R0; Y-axis\u3010Data Type\u3011=16Bit-UINT<\/strong><\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Dot<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>X value<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Y value<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>0<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>0<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>@0:R0<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>1<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>1<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>@0:R1<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>2<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>2<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>@0:R2<\/strong><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<ul>\n<li><strong>Example 2:<\/strong><\/li>\n<\/ul>\n<p><strong>\u3010No. of Data per Curve\u3011= 3; Y-axis\u3010Start Address\u3011=$U:V0; Y Y-axis\u3010Data Type\u3011=32Bit-UINT<\/strong><\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Dot<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>X value<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Y value<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>0<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>0<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>@0:R0@0:R1<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>1<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>1<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>@0:R2@0:R3<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>2<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>2<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>@0:R4~@0:R5<\/strong><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>\u3010X\/Y Max\u3011<\/p>\n<p>Set the maximum Individual Display Range value for the Y value of the curve, this option will appear if\u3010Display Range\u3011is\u3010Individual\u3011.<\/p>\n<p>\u3010X\/Y Min\u3011<\/p>\n<p>Set the minimum Individual Display Range value for the Y-axis, this option will appear if\u3010Display Range\u3011is\u3010Individual\u3011.<\/p>\n<p>\u3010Display Name\u3011<\/p>\n<p>The name of the curve to display on the graph.<\/p>\n<p>\u3010Line\u3011<\/p>\n<p>Select to display the curve line.<\/p>\n<p>\u3010Line Color\u3011<\/p>\n<p>Set the color of the curve.<\/p>\n<p>\u3010Line Type\u3011<\/p>\n<p>Set the line type of curve, including solid, dash, dot, dash dot, dash dot dot, etc.<\/p>\n<p>\u3010Line width\u3011<\/p>\n<p>Set the width of the curve.<\/p>\n<p>\u3010Symbol\u3011<\/p>\n<p>Select to display the curve symbols. <\/p>\n<p>\u3010Symbol Color\u3011<\/p>\n<p>Set the color of the symbols. <\/p>\n<p>\u3010Symbol Type\u3011<\/p>\n<p>Set the symbol type.<\/p>\n<p>\u3010Fill\u3011<\/p>\n<p>Set whether to fill-up the block.<\/p>\n<p>\u3010Fill Type\u3011<\/p>\n<p>Set the fill-up direction.<\/p>\n<p>\u3010Fill Color\u3011<\/p>\n<p>Set the fill-up color.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.13.3 \u3010Display\u3011<\/h5>\n<p>The\u3010Data Block XY Scatter\u3011\u3010Display\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-198.png\" \/><\/p>\n<p>Figure 307\u3010Display\u3011Setting Screen of\u3010Data Block XY Scatter\u3011<\/p>\n<p>Table 174\u3010Display\u3011Setting Properties of\u3010Data Block XY Scatter\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Border\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Select to display the border.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the color of the border.<\/p>\n<p>\u3010Type\u3011<\/p>\n<p>Set the border type.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Background\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the visibility of the background.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the color of the background.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Graph Background\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Select to enable a graph background.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the color of the graph background.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Cursor\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the visibility of the cursor.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the color of the cursor.<\/p>\n<p>\u3010Show Cursor Value\u3011<\/p>\n<p>Select the visibility of the cursor value.<\/p>\n<p>\u3010Show Cursor Value\u3011\u3010Display\u3011<\/p>\n<p>Set the visibility of cursor values. If\u3010Always\u3011is set, the cursor values are always shown. If\u3010Controlled by Bit\u3011is selected, the visibility of cursor values depends on the specified bit.<\/p>\n<p>\u3010Show Curve Name\u3011<\/p>\n<p>Select to display the curve name.<\/p>\n<p>\u3010Show Curve Name\u3011\u3010Display\u3011<\/p>\n<p>Set the visibility of the curve name. If\u3010Always\u3011is set, the curve name is always shown. If\u3010Controlled by Bit\u3011 is selected, the visibility of the curve name depends on the specified bit.<\/p>\n<p>\u3010Font\u3011<\/p>\n<p>Set the font type and size of cursor values.<\/p>\n<p>\u3010Background\u3011<\/p>\n<p>Set the background color of the cursor values.<\/p>\n<p>\u3010Text\u3011<\/p>\n<p>Set the text color of the cursor values.<\/p>\n<p>\u3010Opacity\u3011<\/p>\n<p>Set the background opacity of the cursor values.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.13.4 \u3010Axis\u3011<\/h5>\n<p>The\u3010Data Block XY Scatter\u3011\u3010Axis\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-199.png\" \/><\/p>\n<p>Figure 308\u3010Axis\u3011Setting Screen of\u3010Data Block XY Scatter\u3011<\/p>\n<p>Table 175\u3010Axis\u3011Setting Properties of\u3010Data Block XY Scatter\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Common\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Axis Color\u3011<\/p>\n<p>Set the color of the axis.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010X-axis\u3011 \u3010Division\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Number of Major Division\u3011<\/p>\n<p>Set the number of major divisions for the X-axis.<\/p>\n<p>\u3010Number of Sub Division\u3011<\/p>\n<p>Set the number of sub divisions for the X-axis.<\/p>\n<p>\u3010Show Tick\u3011<\/p>\n<p>Select to display the ticks.<\/p>\n<p>\u3010Show Value\u3011<\/p>\n<p>Select to display the values on the X-axis.<\/p>\n<p>\u3010Value\/Tick Color\u3011<\/p>\n<p>Set the color of the values and ticks.<\/p>\n<p>\u3010Show Grid\u3011<\/p>\n<p>Select to display vertical gridlines, and set the color of the gridlines.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Y-axis\u3011 \u3010Division\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Number of Major Division\u3011<\/p>\n<p>Set the number of major divisions for the Y-axis.<\/p>\n<p>\u3010Number of Sub Division\u3011<\/p>\n<p>Set the number of sub divisions for the Y-axis.<\/p>\n<p>\u3010Show Tick\u3011<\/p>\n<p>Select to display the ticks on the Y-axis.<\/p>\n<p>\u3010Show Value\u3011<\/p>\n<p>Select to display the values on the Y-axis.<\/p>\n<p>\u3010Value\/Tick Color\u3011<\/p>\n<p>Set the color of the values and ticks.<\/p>\n<p>\u3010Show Grid\u3011<\/p>\n<p>Select to display horizontal gridlines, and set the color of the gridlines.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.13.5 \u3010Advanced\u3011<\/h5>\n<p>The\u3010Data Block XY Scatter\u3011\u3010Advanced\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p> <img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-200.png\" \/><\/p>\n<p>Figure 309\u3010Advanced\u3011Setting Screen of\u3010Data Block XY Scatter\u3011<\/p>\n<p>Table 176\u3010Advanced\u3011Setting Properties of\u3010Data Block XY Scatter\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Advanced\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Start\/Stop State Address\u3011<\/p>\n<p>Set such that the\u3010Data Block Graph\u3011will start\/stop at the specified address. Only the display unit\u2019s internal memory is supported.<\/p>\n<p>A value of 0 specifies the start state. A value of 1 specifies the stop state.<\/p>\n<p>\u3010The initial state is stopped\u3011<\/p>\n<p>Set the initial state of of the data to stop.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Register Control\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010X Axis Scale\u3011<\/p>\n<p>X axis scale numbers can be specified by register, it will appear register setting below after checked, and will display the number of consecutive occupancy registers, this register is in 16 Bit-UINT format, table as below.<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Word<\/p>\n<\/td>\n<td>\n<p>Description<\/p>\n<\/td>\n<td>\n<p>Data Type<\/p>\n<\/td>\n<td>\n<p>Min.<\/p>\n<\/td>\n<td>\n<p>Max.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>0<\/p>\n<\/td>\n<td>\n<p>Number of Major Division<\/p>\n<\/td>\n<td>\n<p>16Bit-UINT<\/p>\n<\/td>\n<td>\n<p>1<\/p>\n<\/td>\n<td>\n<p>30<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>1<\/p>\n<\/td>\n<td>\n<p>Number of Sub Division<\/p>\n<\/td>\n<td>\n<p>16Bit-UINT<\/p>\n<\/td>\n<td>\n<p>1<\/p>\n<\/td>\n<td>\n<p>30<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>\u3010Y Axis Scale\u3011<\/p>\n<p>Y axis scale numbers can be specified by register, it will appear register setting below after checked, and will display the number of consecutive occupancy registers, this register is in 16 Bit-UINT format, table as below.<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Word<\/p>\n<\/td>\n<td>\n<p>Description<\/p>\n<\/td>\n<td>\n<p>Data Type<\/p>\n<\/td>\n<td>\n<p>Min.<\/p>\n<\/td>\n<td>\n<p>Max.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>0<\/p>\n<\/td>\n<td>\n<p>Number of Major Division<\/p>\n<\/td>\n<td>\n<p>16Bit-UINT<\/p>\n<\/td>\n<td>\n<p>1<\/p>\n<\/td>\n<td>\n<p>30<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>1<\/p>\n<\/td>\n<td>\n<p>Number of Sub Division<\/p>\n<\/td>\n<td>\n<p>16Bit-UINT<\/p>\n<\/td>\n<td>\n<p>1<\/p>\n<\/td>\n<td>\n<p>30<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>\u3010X Axis Range\u3011<\/p>\n<p>X axis range can be specified by register, it will appear register setting below after checked, and will display the number of consecutive occupancy registers, table as below.<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Word<\/p>\n<\/td>\n<td>\n<p>Description<\/p>\n<\/td>\n<td>\n<p>Data Type<\/p>\n<\/td>\n<td>\n<p>Min.<\/p>\n<\/td>\n<td>\n<p>Max.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>0 &amp; 1<\/p>\n<\/td>\n<td>\n<p>Maximum of x axis.<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>X<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>2 &amp; 3<\/p>\n<\/td>\n<td>\n<p>Minimum of x axis.<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>X<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>4<\/p>\n<\/td>\n<td>\n<p>The decimal point position of the X axis value<\/p>\n<\/td>\n<td>\n<p>16Bit-UINT<\/p>\n<\/td>\n<td>\n<p>0<\/p>\n<\/td>\n<td>\n<p>5<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><strong>Note: maximum value should bigger than minimum value.<\/strong><\/p>\n<p>\u3010Y Axis Range\u3011<\/p>\n<p>Y axis range can be specified by register, it will appear register setting below after checked, and will display the number of consecutive occupancy registers, table as below.<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Word<\/p>\n<\/td>\n<td>\n<p>Description<\/p>\n<\/td>\n<td>\n<p>Data Type<\/p>\n<\/td>\n<td>\n<p>Min.<\/p>\n<\/td>\n<td>\n<p>Max.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>0 &amp; 1<\/p>\n<\/td>\n<td>\n<p>The maximum of the Y-axis on the left side of the graph<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>2 &amp; 3<\/p>\n<\/td>\n<td>\n<p>The minimum of the Y-axis on the left side of the graph<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>4<\/p>\n<\/td>\n<td>\n<p>Curve left side of the Y-axis value of the decimal point position<\/p>\n<\/td>\n<td>\n<p>16Bit-UINT<\/p>\n<\/td>\n<td>\n<p>0<\/p>\n<\/td>\n<td>\n<p>5<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>5 &amp; 6<\/p>\n<\/td>\n<td>\n<p>The maximum of the Y-axis on the right side of the graph<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>7 &amp; 8<\/p>\n<\/td>\n<td>\n<p>The minimum of the Y-axis on the right side of the graph<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>9<\/p>\n<\/td>\n<td>\n<p>Curve right side of the Y-axis value of the decimal point position<\/p>\n<\/td>\n<td>\n<p>16Bit-UINT<\/p>\n<\/td>\n<td>\n<p>0<\/p>\n<\/td>\n<td>\n<p>5<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><strong>Note: maximum value should bigger than minimum value.<\/strong><\/p>\n<p>\u3010Curves\u3011<\/p>\n<p>If curve Y-axis display range use\u3010individual\u3011, check this option, each of the Y-axis curve can be specified by register, and will display the number of consecutive occupancy registers, table as below.<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Word<\/p>\n<\/td>\n<td>\n<p>Description<\/p>\n<\/td>\n<td>\n<p>Data Type<\/p>\n<\/td>\n<td>\n<p>Min.<\/p>\n<\/td>\n<td>\n<p>Max.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>0 &amp; 1<\/p>\n<\/td>\n<td>\n<p>X-axis maximum value of curve 0.<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>2 &amp; 3<\/p>\n<\/td>\n<td>\n<p>X-axis minimum value of curve 0.<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>4 &amp; 5<\/p>\n<\/td>\n<td>\n<p>Y-axis maximum value of curve 0.<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>6 &amp; 7<\/p>\n<\/td>\n<td>\n<p>Y-axis minimum value of curve 0.<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>8 &amp; 9<\/p>\n<\/td>\n<td>\n<p>X-axis maximum of curve 1.<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>10 &amp; 11<\/p>\n<\/td>\n<td>\n<p>X-axis minimum of curve 1.<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>12 &amp; 13<\/p>\n<\/td>\n<td>\n<p>Y-axis maximum value of curve 1.<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>14 &amp; 15<\/p>\n<\/td>\n<td>\n<p>Y-axis minimum value of curve 1.<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u2026<\/p>\n<\/td>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td>\n<p>248 &amp; 249<\/p>\n<\/td>\n<td>\n<p>X-axis maximum of curve 31.<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>250 &amp; 251<\/p>\n<\/td>\n<td>\n<p>X-axis minimum of curve 31.<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>252 &amp; 253<\/p>\n<\/td>\n<td>\n<p>Y-axis maximum value of curve 31.<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>254 &amp; 255<\/p>\n<\/td>\n<td>\n<p>Y-axis minimum value of curve 31.<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><strong>Note: maximum value should bigger than minimum value.<\/strong><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.13.6 \u3010Sub Switch\u3011<\/h5>\n<p>The\u3010Data Block XY Scatter\u3011\u3010Sub Switch\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p> <img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-201.png\" \/><\/p>\n<p>Figure 310\u3010Sub Switch\u3011Setting Screen of\u3010Data Block XY Scatter\u3011<\/p>\n<p>Table 177\u3010Sub Switch\u3011Setting Properties of\u3010Data Block XY Scatter\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Sub Switch List\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Sub Switch List\u3011that can be selected for\u3010Data Block XY Scatter\u3011. Sub switches can be enabled after selecting them. Settings for the appearance of the selected sub switches will also appear on the right.<\/p>\n<p>When different sub switches are selected from the list, the appearance settings to the right will be updated according to the sub switches selected.<\/p>\n<p>In which the\u3010Sub Switches\u3011are divided into:<\/p>\n<ul>\n<li>\u3010Start\u3011\u2014Start updating curve.<\/li>\n<li>\u3010Stop\u3011\u2014Stop updating curve.<\/li>\n<li>\u3010Clear\u3011\u2014Clear curve.<\/li>\n<li>\u3010Hor. Zoom In\u3011\u2014Horizontal zoom in.<\/li>\n<li>\u3010Hor. Zoom Out\u3011\u2014Horizontal zoom out.<\/li>\n<li>\u3010Ver. Zoom In\u3011\u2014Vertical zoom in.<\/li>\n<li>\u3010Ver. Zoom Out\u3011\u2014Vertical zoom out.<\/li>\n<li>\u3010Move Left\u3011\u2014Move Left.<\/li>\n<li>\u3010Move Right\u3011\u2014Move Right.<\/li>\n<li>\u3010Move Up\u3011\u2014Move Up.<\/li>\n<li>\u3010Persistence On\u3011-Preserve old curves ON; used for comparing curves. The color of old curves will be darker than the original ones.<\/li>\n<li>\u3010Persistence Off\u3011-Preserve old curves OFF; clears all old curves.<\/li>\n<\/ul>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Display\u3011\u3010Text\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Direct Text Font\u3011<\/p>\n<p>Set the text font of the sub switch currently selected.<\/p>\n<p>\u3010Direct Text Size\u3011<\/p>\n<p>Set the text size of the sub switch currently selected.<\/p>\n<p>\u3010Position\u3011<\/p>\n<p>Set the text position of the sub switch currently selected.<\/p>\n<p>\u3010Format\u3011<\/p>\n<p>Set the text format of the sub switch currently selected, including Bold, Italics and Underline.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the text color of the sub switch currently selected.<\/p>\n<p>\u3010Content(Direct Text)\u3011<\/p>\n<p>Set the text of the sub switch currently selected.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Display\u3011\u3010Background\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the background of the sub switch currently selected. Check it to activate background settings, and the displayed background of the sub switch currently selected can be edited below. If this option is not checked, the background will be transparent.<\/p>\n<p>\u3010Use Image\u3011<\/p>\n<p>Set to use an image for the displayed background of the sub switch currently selected. When this option is checked, image selection settings will appear asking the user to select an image either from the\u3010Image Library\u3011or from a file.<\/p>\n<p>\u3010Background Color\u3011<\/p>\n<p>Set the background color of the sub switch currently selected. This setting will appear if \u3010Use Image\u3011was not selected. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Display\u3011\u3010while Pressing\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Play Audio\u3011<\/p>\n<p>Select to play audio when the sub switch is pressed. An\u3010Audio Selector\u3011will appear on the right when enabled. The switch on the right of the\u3010Audio Selector\u3011can be pressed to select an audio and the switch on the left of the\u3010Audio Selector\u3011can be pressed to play the audio selected. <\/p>\n<p>\u3010Pressing Effect\u3011<\/p>\n<p>Set the pressing effect of the sub switch currently selected. There are two effects available for selection:\u3010None\u3011and\u3010Highlight\u3011.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Advanced\u3011\u3010Operation Control\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Operation control of sub switch, it can enabled by bit or security.<\/p>\n<p>\u3010Enable by Bit\u3011<\/p>\n<p>Check whether the sub switch operation is controlled by a bit<\/p>\n<p>\u3010Show Disabled Sign\u3011<\/p>\n<p>Check if you want to display the forbidden symbol, it\u2019s valid when check\u3010Enable by Bit\u3011,\u3010Enabled by Word\u3011or\u3010Enable by Security\u3011.<\/p>\n<p>\u3010Address\u3011<\/p>\n<p>Set the address of the sub switch operation control bit.<\/p>\n<p>\u3010State\u3011<\/p>\n<p>Set the control bit as 1 or 0 to operate object. <\/p>\n<p>\u3010Enabled by Word\u3011<\/p>\n<p>Check whether the operation is controlled by word.<\/p>\n<p>\u3010Address\u3011<\/p>\n<p>Set the operation control word address.<\/p>\n<p>\u3010Condition\u3011<\/p>\n<p>Set the condition of word control and when it is true then the object can be controlled, when false not the object can not be controlled. The condition include\u2019 =\u2019,\u2019 !=\u2019, \u2018&gt;\u2019, \u2018&lt;\u2019, \u2018&gt;=\u2019, \u2018&lt;=\u2019.<\/p>\n<p>\u3010Enable by Security\u3011<\/p>\n<p>Select the sub switch whether controlled by user level.<\/p>\n<p>\u3010User Level Condition\u3011<\/p>\n<p>Set the level and condition of the object.<\/p>\n<p>\u3010Hold Time\u3011<\/p>\n<p>Check whether the operation is controlled by hold time. Hold time can be divided into two kinds:<\/p>\n<ul>\n<li>\u3010Press On\u3011: press directly, according to the\u3010Min. Hold Time\u3011to confirm whether the operation is executed.<\/li>\n<li>\u3010Double Press\u3011: quickly double press to confirm whether the operation is executed.<\/li>\n<\/ul>\n<p>\u3010Operator Confirm\u3011<\/p>\n<p>Check whether show comfirmation message window after checking the operation.<\/p>\n<p>\u3010Max. Waiting Time\u3011<\/p>\n<p>When the confirmation message window is displayed, If the user does not reply within this time, the system will close the confirmation message window and cancel this operation<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h4>19.4.14 \u3010Multistate Switch\u3011<\/h4>\n<p>\u3010Multistate Switch\u3011can write the numeric value corresponding to the set state into specific registers. The state can be changed by pressing the Multistate Switch and the numeric value written into the register will also change accordingly.<\/p>\n<h5>19.4.14.1 \u3010Setting\u3011<\/h5>\n<p>The\u3010Multistate Switch\u3011\u3010Setting\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p> <img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-202.jpg\" \/><\/p>\n<p>Figure 311\u3010Setting\u3011Screen of\u3010Multistate Switch\u3011<\/p>\n<p>Table 178\u3010Setting\u3011Properties of\u3010Multistate Switch\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Preview\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Preview the appearance of this object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Name\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The default name of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Comment\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the comment of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Update\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Provide user can select a suitable speed to get the latest data under different situation, such as you would like to get the latest data or adjust the object on the screen to display first, etc.<\/p>\n<p>Provide three modes:<\/p>\n<p>\u3010once\u3011: update once only when switch to this page or use the system tag\u3010OP_UPDATE_SCREEN_OBJECTS\u3011, update once when trigger once a time, it will keep update if the monitor address is internal address.<\/p>\n<p>\u3010normal\u3011: normal update speed.<\/p>\n<p>\u3010fast\u3011: the fastest update speed.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Execute while Releasing\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Select to execute the action set for the Multistate Switch while releasing. The action will be executing immediately when the Step Switch is pressed if this option is not selected.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Individual Buzzer Setting\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Can individually setup buzzer setting.<\/p>\n<p>Includes 5 modes: Off, Short, Long, Short-Short, Long-Short.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Play Audio while Pressing\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Select to play audio when the Multistate Switch is pressed. An\u3010Audio Selector\u3011will appear on the right when enabled. The switch on the right of the\u3010Audio Selector\u3011can be pressed to select an audio and the switch on the left of the\u3010Audio Selector\u3011can be pressed to play the audio selected.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Write Address\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the operating address of the Multistate Switch.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Data Type\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the Data Type of the Multistate Switch.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Number of States\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the number of states of the Multistate Switch; the maximum number of states is 256.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010State Type\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the State Type of the Multistate Switch.<\/p>\n<p>The\u3010Written Value\u3011cannot be edited and numeric values identical to each state number will be automatically filled out if\u3010Value\u3011is selected. For example, the\u3010Written Value\u3011will be 0 of the state is 0.<\/p>\n<p>Users can switch between states from the list on the left and customize the numeric value corresponding to each state from\u3010Written Value\u3011if\u3010Custom\u3011is selected.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Control Type\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Support 2 types to control: Button and List.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Written Value\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Sets the numeric value to write for each state when the Multistate Switch is pressed.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Notification\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set to allow the notification function for the Multistate Switch. Related settings will appear if this option is selected, allowing setting of bit and value for notification.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.14.2 \u3010Display\u3011<\/h5>\n<p>The\u3010Multistate Switch\u3011\u3010Display\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p> <img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-203.png\" \/><\/p>\n<p>Figure 312\u3010Display\u3011Setting Screen of\u3010Multistate Switch\u3011<\/p>\n<p>Table 179\u3010Display\u3011Setting Properties of\u3010Multistate Switch\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010State\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Switch to the state currently editing. 0 and 1 buttons are provided to enable quick switching between states 0 and 1.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Text\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Direct Text Font\u3011<\/p>\n<p>Set the font of the text for the current editing state.<\/p>\n<p>\u3010Direct Text Size\u3011<\/p>\n<p>Set the size of the text for the current editing state.<\/p>\n<p>\u3010Position\u3011<\/p>\n<p>Set the position of the text for the current editing state.<\/p>\n<p>\u3010Blink\u3011<\/p>\n<p>Set the blinking function for the text of the current editing state. There are four blinking speeds available to choose from: None, Slow, Medium and Fast.<\/p>\n<p>\u3010Scrolling Text\u3011<\/p>\n<p>Set the scrolling text function for the text of the current editing state. There are four scrolling speeds available to choose from slow to fast.<\/p>\n<p>\u3010Format\u3011<\/p>\n<p>Set the format of the text for the current editing state, including Bold, Italics and Underline.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the color of the text for the current editing state.<\/p>\n<p>\u3010Copy Attributes to All States\u3011<\/p>\n<p>The text properties for the current editing state is applied to all states.<\/p>\n<p>\u3010Content (Direct Text)\u3011<\/p>\n<p>Set the text of the current editing state. It can be inputted directly or acquired from the\u3010Text Library\u3011.<\/p>\n<p>\u3010Copy Content to All States\u3011<\/p>\n<p>Apply the settings of the text for the current editing state to all states.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Background\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Background\u3011<\/p>\n<p>Check whether to enable background<\/p>\n<p>\u3010Image\u3011<\/p>\n<p>Check whether to use image<\/p>\n<p>\u3010Source\u3011<\/p>\n<p>Set whether to use an image for the displayed background of the current editing state. When this option is checked, an\u3010Image Selector\u3011will appear asking the user to select an image either from the\u3010Image Library\u3011or from\u3010File\u3011.<\/p>\n<p>\u3010Size\u3011<\/p>\n<p>After setting, the original size of the picture can be displayed, and the\u3010Position\u3011option will appear to allow the user to select the area to be displayed.<\/p>\n<p>\u3010Rotate\u3011<\/p>\n<p>Set image rotation angle<\/p>\n<p>\u3010Flip\u3011<\/p>\n<p>Set the flip direction of the image, includes No Flip, X-Axis and Y-Axis.<\/p>\n<p>\u3010Tone Type\u3011<\/p>\n<p>You can choose the tone type you want to change. After selecting the type, you can choose the color from\u3010Tone Color\u3011.<\/p>\n<p>\u3010Remove Background\u3011<\/p>\n<p>You can set the color to be transparent by\u3010Choose Color\u3011.<\/p>\n<p>\u3010Background\u3011<\/p>\n<p>Check whether to enable the background. After checking, you can set the background color displayed in the current editing state from\u3010Color\u3011.<\/p>\n<p>\u3010Animation\u3011<\/p>\n<p>Check whether to enable animated effects. <\/p>\n<p>\u3010Mode\u3011Choose whether to use static or dynamic control elements to flicker.<\/p>\n<p>  \u3010Blink\u3011Select the blinking mode, and use the numerical value to switch during dynamic control.<\/p>\n<p>\u3010Pressing Effect\u3011<\/p>\n<p>Set the pressing effect of the current editing state. There are two effects available for selection: None and Highlight.<\/p>\n<p>\u3010Copy to All States\u3011<\/p>\n<p>Apply the settings of the background for the currently editing state to all states.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Border\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the object border.<\/p>\n<p>\u3010Color\/Width\u3011<\/p>\n<p>Set the color and width of the border.<\/p>\n<p>\u3010Type\u3011<\/p>\n<p>Set the type of the border.<\/p>\n<p>\u3010Copy to All States\u3011<\/p>\n<p>Apply the settings of the border for the current editing state to all states.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.14.3 \u3010External Lable\u3011<\/h5>\n<p>The\u3010Multistate Switch\u3011\u3010External Lable\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-204.png\" \/><\/p>\n<p>Figure 313\u3010External Lable\u3011Setting Screen of\u3010Multistate Switch\u3011<\/p>\n<p>Table 180\u3010Multistate Switch\u3011\u3010External Lable\u3011setting properties<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Option<\/p>\n<\/td>\n<td>\n<p>Description<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Enable External Lable\u3011<\/p>\n<\/td>\n<td>\n<p>Checked, the bottom will appear the external lable settings of the object. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Direction\u3011<\/p>\n<\/td>\n<td>\n<p>Set the display direction, there are horizontal and vertical two selections.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Space\u3011<\/p>\n<\/td>\n<td>\n<p>Set the space between external lable and the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Left\/Top Lable(Direct Text)\u3011<\/p>\n<\/td>\n<td>\n<p>Fill in the text to be displayed on the left \/ top lable of the object, can be directly input or selected from\u3010Font Library\u3011. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Right\/Bottom Lable(Direct Text)\u3011<\/p>\n<\/td>\n<td>\n<p>Fill in the text to be displayed on the right \/ bottom lable of the object, can be directly input or selected from\u3010Font Library\u3011. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Text\u3011<\/p>\n<\/td>\n<td>\n<p>\u3010Direct Text Font\u3011<\/p>\n<p>Set the font of text.<\/p>\n<p>\u3010Direct Text Size\u3011<\/p>\n<p>Set the size of text, the default size is 20.<\/p>\n<p>\u3010Alignment\u3011<\/p>\n<p>Set the alignment of text.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the color of text.<\/p>\n<p>\u3010Format\u3011<\/p>\n<p>Set the format of text, includes Bold, Italic and Underline.<\/p>\n<p>\u3010Word Spacing\u3011<\/p>\n<p>Set the word space of text.<\/p>\n<p>\u3010Margin\u3011<\/p>\n<p>Set the margin of text.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Background\u3011<\/p>\n<\/td>\n<td>\n<p>Check whether to display background, set the color and opacity of background after checked. <\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the background color of external lable.<\/p>\n<p>\u3010Opacity\u3011<\/p>\n<p>Set the opacity of external lable background, the greater the value the more the background opacity is. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Border\u3011<\/p>\n<\/td>\n<td>\n<p>Check whether to display border. <\/p>\n<p>\u3010Color\/Width\u3011<\/p>\n<p>Set the color and width of border.<\/p>\n<p>\u3010Type\u3011<\/p>\n<p>Set the type of border.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h4>19.4.15 \u3010Slide Switch\u3011<\/h4>\n<p>\u3010Slide Switch\u3011allows users to write the numeric value corresponding to the final position of the slider into the set register by dragging.<\/p>\n<h5>19.4.15.1 \u3010Setting\u3011<\/h5>\n<p>The\u3010Slide Switch\u3011\u3010Setting\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p> <img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-205.png\" \/><\/p>\n<p>Figure 314\u3010Setting\u3011Screen of\u3010Slide Switch\u3011<\/p>\n<p>Table 181\u3010Setting\u3011Properties of\u3010Slide Switch\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Preview\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Preview the appearance of this object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Name\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The default name of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Comment\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the comment of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Address\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Write Address\u3011<\/p>\n<p>Set the register address to write the numeric value when the user operates the Slide Switch.<\/p>\n<p>\u3010Data Type\u3011<\/p>\n<p>Set the Data Type of the Slide Switch Write Address.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Control\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Direction\u3011<\/p>\n<p>Set the moving direction of the Slide Switch, including left to right, right to left, top to bottom, bottom to top.<\/p>\n<p>\u3010Input Range\u3011<\/p>\n<p>Set the\u3010Max\u3011and\u3010Min\u3011numeric values for the Slide Switch to write. The\u3010Address\u3011below can be used to set the source address for reading the maximum value or minimum value by\u3010Data Type\u3011.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Notification\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set to allow the notification function for the Slide Switch. Related settings will appear if this option is selected, allowing setting of a register for notification, includes reset and set.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.15.2 \u3010Display\u3011<\/h5>\n<p>The\u3010Slide Switch\u3011\u3010Display\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p> <img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-206.png\" \/><\/p>\n<p>Figure 315\u3010Display\u3011Setting Screen of\u3010Slide Switch\u3011<\/p>\n<p>Table 182\u3010Display\u3011Setting Properties of\u3010Slide Switch\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Ticks\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Display Scale\u3011<\/p>\n<p>Set whether to display the scale of the Slide Switch.<\/p>\n<p>\u3010Position\u3011<\/p>\n<p>Set the position to display the scale for the Slide Switch.<\/p>\n<p>\u3010Number of Major Ticks\u3011<\/p>\n<p>Set the number of major ticks for the Slide Switch.<\/p>\n<p>\u3010Color of Major Ticks\u3011<\/p>\n<p>Set the color of the major ticks for the Slide Switch.<\/p>\n<p>\u3010Number of Minor Ticks\u3011<\/p>\n<p>Set the amount of minor ticks for the Slide Switch.<\/p>\n<p>\u3010Color of Minor Ticks\u3011<\/p>\n<p>Set the displayed color of the minor ticks for the Slide Switch.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Numerical Scale\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Display Numerical Marks\u3011<\/p>\n<p>Set to display the numerical marks for the Slide Switch.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the color for the numerical marks on the Slide Switch.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Appearance\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Border Type\u3011<\/p>\n<p>Set the border type of the Slide Switch.<\/p>\n<p>\u3010Border Color\/Width\u3011<\/p>\n<p>Set the border color and border thickness of the Slide Switch.<\/p>\n<p>\u3010Background Color\u3011<\/p>\n<p>Set the background color of the Slide Switch.<\/p>\n<p>\u3010Slider Color\u3011<\/p>\n<p>Set the slider color of the Slide Switch.<\/p>\n<p>\u3010Groove Color\u3011<\/p>\n<p>Set the groove color of the Slide Switch.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.15.3 \u3010External Lable\u3011<\/h5>\n<p>The\u3010Slide Switch\u3011\u3010External Lable\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-207.png\" \/><\/p>\n<p>Figure 316\u3010External Lable\u3011Setting Screen of\u3010Slide Switch\u3011<\/p>\n<p>Table 183\u3010Slide Switch\u3011\u3010External Lable\u3011setting properties<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Option<\/p>\n<\/td>\n<td>\n<p>Description<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Enable External Lable\u3011<\/p>\n<\/td>\n<td>\n<p>Checked, the bottom will appear the external lable settings of the object. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Direction\u3011<\/p>\n<\/td>\n<td>\n<p>Set the display direction, there are horizontal and vertical two selections.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Space\u3011<\/p>\n<\/td>\n<td>\n<p>Set the space between external lable and the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Left\/Top Lable(Direct Text)\u3011<\/p>\n<\/td>\n<td>\n<p>Fill in the text to be displayed on the left \/ top lable of the object, can be directly input or selected from\u3010Font Library\u3011. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Right\/Bottom Lable(Direct Text)\u3011<\/p>\n<\/td>\n<td>\n<p>Fill in the text to be displayed on the right \/ bottom lable of the object, can be directly input or selected from\u3010Font Library\u3011. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Text\u3011<\/p>\n<\/td>\n<td>\n<p>\u3010Direct Text Font\u3011<\/p>\n<p>Set the font of text.<\/p>\n<p>\u3010Direct Text Size\u3011<\/p>\n<p>Set the size of text, the default size is 20.<\/p>\n<p>\u3010Alignment\u3011<\/p>\n<p>Set the alignment of text.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the color of text.<\/p>\n<p>\u3010Format\u3011<\/p>\n<p>Set the format of text, includes Bold, Italic and Underline.<\/p>\n<p>\u3010Word Spacing\u3011<\/p>\n<p>Set the word space of text.<\/p>\n<p>\u3010Margin\u3011<\/p>\n<p>Set the margin of text.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Background\u3011<\/p>\n<\/td>\n<td>\n<p>Check whether to display background, set the color and opacity of background after checked. <\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the background color of external lable.<\/p>\n<p>\u3010Opacity\u3011<\/p>\n<p>Set the opacity of external lable background, the greater the value the more the background opacity is. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Border\u3011<\/p>\n<\/td>\n<td>\n<p>Check whether to display border. <\/p>\n<p>\u3010Color\/Width\u3011<\/p>\n<p>Set the color and width of border.<\/p>\n<p>\u3010Type\u3011<\/p>\n<p>Set the type of border.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h4>19.4.16 \u3010Selector List\u3011<\/h4>\n<p>\u3010Selector List\u3011allows users to display multiple switches using a pull-down menu so that related switches can be organized into a single list, making it convenient for the operators to select the switches needed.<\/p>\n<h5>19.4.16.1 \u3010Setting\u3011<\/h5>\n<p>The\u3010Selector List\u3011\u3010Setting\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p> <img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-208.jpg\" \/><\/p>\n<p>Figure 317\u3010Setting\u3011Screen of\u3010Selector List\u3011<\/p>\n<p>Table 184\u3010Setting\u3011Properties of\u3010Selector List\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Preview\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Preview the appearance of this object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Name\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The default name of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Comment\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the comment of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Switch Name\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the name of the switch currently selected. Users can change the currently selected switch from the\u3010Switch List\u3011.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Play Audio while Pressing\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Select to play audio when the Step Switch is pressed. An\u3010Audio Selector\u3011will appear on the right when enabled. The switch on the right of the\u3010Audio Selector\u3011can be pressed to select an audio and the switch on the left of the\u3010Audio Selector\u3011can be pressed to play the audio selected.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Execute when Item is Selected\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Select whether to enable the\u3010Execute when Item is Selected\u3011function. When it is enabled, the function of a switch will be executed immediately when the user selected a switch from the Selector List object. If it is not enabled, the function of the selected switch will only be executed after the user pressed the\u3010Execute\u3011button.<\/p>\n<p>When the Switch using\u3010Bit Momentary\u3011 action of\u3010Bit Switch\u3011in the\u3010Switch List\u3011, or the\u3010Continuously Add\u3011\/\u3010Continuously Subtract\u3011of\u3010Add Data\u3011action \/\u3010Subtract Data\u3011 action in the\u3010Word Switch\u3011, \u3010Execute When this Item is Selected\u3011the option will not be able to check.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Individual Buzzer Setting\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Can individually setup buzzer setting.<\/p>\n<p>Includes 5 modes: Off, Short, Long, Short-Short, Long-Short.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Bit Switch\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Change the currently editing switch type to\u3010Bit Switch\u3011,for the related property settings please refer to the description of the switch.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Word Switch\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Change the currently editing switch type to\u3010Word Switch\u3011,for the related property settings please refer to the description of the switch..<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Change Screen\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Change the currently editing switch type to\u3010Change Screen\u3011,for the related property settings please refer to the description of the switch..<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Function Switch\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Change the currently editing switch type to\u3010Function Switch\u3011,for the related property settings please refer to the description of the switch..<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Notification\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set whether to allow the notification function. Related setting items will appear if this option is selected, allowing setting of bit and value for notification.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Switch List\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Display the switch list currently included in the Selector List item object.<\/p>\n<p>\u3010Add\u3011<\/p>\n<p>Increase the number of switches in the\u3010Switch List\u3011; the type of switch to add can be selected.<\/p>\n<p>\u3010Delete\u3011<\/p>\n<p>Delete the switch currently selected in the\u3010Switch List\u3011.<\/p>\n<p>\u3010Up\u3011<\/p>\n<p>Move the order of the switch currently selected in the\u3010Switch List\u3011up.<\/p>\n<p>\u3010Down\u3011<\/p>\n<p>Move the order of the switch currently selected in the\u3010Switch List\u3011down.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Notify before Writing\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The signal will notify before writing.<\/p>\n<p>Level: Set the bit as 0 or 1.<\/p>\n<p>Pulse: Set the bit to 1 and automatically restore to 0 after continuing the time set by\u3010Width\u3011.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Notify after Writing\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The signal will notify after writing.<\/p>\n<p>Level: Set the bit as 0 or 1.<\/p>\n<p>Pulse: Set the bit to 1 and automatically restore to 0 after continuing the time set by\u3010Width\u3011.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><strong>Note: When all members of the selector list are\u3010Word Switches\u3011, the action set to\u3010Write Data\u3011, and the\u3010Data Types\u3011are the same, if the address is changed through the list, the constant change will show up in the monitoring object. If the address is changed through an outside object, the item in the list will change accordingly. This does not apply if the\u3010Data Type\u3011is 32Bit-Float.<\/strong><\/p>\n<p><strong>Example: There are three\u3010Word Switches\u3011in the\u3010Selector List\u3011. The actions are all set to\u3010Write Data\u3011and the\u3010Data Types\u3011are the same. All three switches also control the same register: R100. Item1 is set write 1 into the address, Item2 is set write 2 into the address, and Item3 is set to write 3 into the address. If R100 has 2 written into it, the item shown in the selector list will be item 2.<\/strong><\/p>\n<h5>19.4.16.2 \u3010Display\u3011<\/h5>\n<p>The\u3010Selector List\u3011\u3010Display\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p> <img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-209.png\" \/><\/p>\n<p>Figure 318\u3010Display\u3011Setting Screen of\u3010Selector List\u3011<\/p>\n<p>Table 185\u3010Display\u3011Setting Properties of\u3010Selector List\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Menu\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Direct Text Font\u3011<\/p>\n<p>Set the font of the text displayed for the Selector List.<\/p>\n<p>\u3010Size\u3011<\/p>\n<p>Set the size of the text displayed for the Selector List.<\/p>\n<p>\u3010Position\u3011<\/p>\n<p>Set the position of the text displayed for the Selector List.<\/p>\n<p>\u3010Format\u3011<\/p>\n<p>Set the format of the text displayed for the Selector List, including Bold, Italics and Underline.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the color of the text displayed for the Selector List.<\/p>\n<p>\u3010Background Color\u3011<\/p>\n<p>Set the displayed background color of the Selector List.<\/p>\n<p>\u3010Selection Background Color\u3011<\/p>\n<p>Set the displayed background color of the selected item in Selector List.<\/p>\n<p>\u3010Border Type\u3011<\/p>\n<p>Set the displayed border type of the Selector List.<\/p>\n<p>\u3010Border Color\/Width\u3011<\/p>\n<p>Set the displayed border color and border thickness of the Selector List.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Background\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Image\u3011<\/p>\n<p>Check whether to use image<\/p>\n<p>\u3010Source\u3011<\/p>\n<p>Set whether to use an image for the displayed background of the current editing state. When this option is checked, an\u3010Image Selector\u3011will appear asking the user to select an image either from the\u3010Image Library\u3011or from\u3010File\u3011.<\/p>\n<p>\u3010Size\u3011<\/p>\n<p>After setting, the original size of the picture can be displayed, and the\u3010Position\u3011option will appear to allow the user to select the area to be displayed.<\/p>\n<p>\u3010Tone Type\u3011<\/p>\n<p>You can choose the tone type you want to change. After selecting the type, you can choose the color from\u3010Tone Color\u3011.<\/p>\n<p>\u3010Background\u3011<\/p>\n<p>Check whether to enable background<\/p>\n<p>\u3010Pressing Effect\u3011<\/p>\n<p>Set the pressing effect of the current editing state. There are two effects available for selection: None and Highlight.<\/p>\n<p>\u3010Text Font\u3011<\/p>\n<p>Set the text font displayed on the item menu button.<\/p>\n<p>\u3010Text Size\u3011<\/p>\n<p>Set the text size displayed on the item menu button.<\/p>\n<p>\u3010Text Color\u3011<\/p>\n<p>Set the text color displayed on the item menu button.<\/p>\n<p>\u3010Text\u3011<\/p>\n<p>Set the text displayed on the item menu button.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.16.3 \u3010External Lable\u3011<\/h5>\n<p>The\u3010Selector List\u3011\u3010External Lable\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-210.png\" \/><\/p>\n<p>Figure 319\u3010External Lable\u3011Setting Screen of\u3010Selector List\u3011<\/p>\n<p>Table 186\u3010Selector List\u3011\u3010External Lable\u3011setting properties<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Option<\/p>\n<\/td>\n<td>\n<p>Description<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Enable External Lable\u3011<\/p>\n<\/td>\n<td>\n<p>Checked, the bottom will appear the external lable settings of the object. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Direction\u3011<\/p>\n<\/td>\n<td>\n<p>Set the display direction, there are horizontal and vertical two selections.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Space\u3011<\/p>\n<\/td>\n<td>\n<p>Set the space between external lable and the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Left\/Top Lable(Direct Text)\u3011<\/p>\n<\/td>\n<td>\n<p>Fill in the text to be displayed on the left \/ top lable of the object, can be directly input or selected from\u3010Font Library\u3011. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Right\/Bottom Lable(Direct Text)\u3011<\/p>\n<\/td>\n<td>\n<p>Fill in the text to be displayed on the right \/ bottom lable of the object, can be directly input or selected from\u3010Font Library\u3011. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Text\u3011<\/p>\n<\/td>\n<td>\n<p>\u3010Direct Text Font\u3011<\/p>\n<p>Set the font of text.<\/p>\n<p>\u3010Direct Text Size\u3011<\/p>\n<p>Set the size of text, the default size is 20.<\/p>\n<p>\u3010Alignment\u3011<\/p>\n<p>Set the alignment of text.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the color of text.<\/p>\n<p>\u3010Format\u3011<\/p>\n<p>Set the format of text, includes Bold, Italic and Underline.<\/p>\n<p>\u3010Word Spacing\u3011<\/p>\n<p>Set the word space of text.<\/p>\n<p>\u3010Margin\u3011<\/p>\n<p>Set the margin of text.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Background\u3011<\/p>\n<\/td>\n<td>\n<p>Check whether to display background, set the color and opacity of background after checked. <\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the background color of external lable.<\/p>\n<p>\u3010Opacity\u3011<\/p>\n<p>Set the opacity of external lable background, the greater the value the more the background opacity is. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Border\u3011<\/p>\n<\/td>\n<td>\n<p>Check whether to display border. <\/p>\n<p>\u3010Color\/Width\u3011<\/p>\n<p>Set the color and width of border.<\/p>\n<p>\u3010Type\u3011<\/p>\n<p>Set the type of border.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h4>19.4.17 \u3010Radio Button\u3011<\/h4>\n<p>\u3010Radio Button\u3011includes multiple buttons and status,in this group button, only one of the state objects can be operated at a time, write the data to the corresponding value or corresponding bit of the PLC, and at the same time only one state will be on, for operator easy to use.<\/p>\n<h5>19.4.17.1 \u3010Setting\u3011<\/h5>\n<p>\u3010Radio Button\u3011\u3010Setting\u3011paging shown as below, each of the setting meaning as follow:<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-211.jpg\" \/><\/p>\n<p>Figure 320\u3010Radio Button\u3011\u3010Setting\u3011setting paging<\/p>\n<p>Table 187\u3010Radio Button\u3011\u3010Setting\u3011setting properties<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Preview\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Preview the appearance of this object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Name\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The default name of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Comment\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the comment of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Excute while Releasing\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Select to execute the action set for the radio button while releasing. The action will be executed immediately when the switch is pressed if this option is not selected.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Individual Buzzer Setting\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Can individually setup buzzer setting.<\/p>\n<p>Includes 5 modes: Off, Short, Long, Short-Short, Long-Short.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Play Audio while Pressing\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Select to play audio when the switch is pressed. An\u3010Audio Selector\u3011will appear on the right when enabled. The switch on the right of the\u3010Audio Selector\u3011can be pressed to select an audio and the switch on the left of the\u3010Audio Selector\u3011can be pressed to play the selected audio.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Address\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the operate address of the radio button.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Data Type\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the data type of the radio button, including 16Bit-BCD\u300116Bit-INT\u300116Bit-UINT\u300132Bit-BCD\u300132Bit-INT\u300132Bit-UINT and 32Bit-FLOAT, etc.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Total Buttons\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the numbers of total buttons.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Direction\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the direction of the radio button, including right to left, left to right, top to bottom, bottom to top.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Button Spacing\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set button spacing of each button.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Show Mark\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set whether mark the radio button.<\/p>\n<p>\u3010Mark Backgroung Color\u3011<\/p>\n<p>Set the background color that the radio button mark to display.<\/p>\n<p>\u3010Mark Color\u3011<\/p>\n<p>Set the color that radio button mark to display.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Value\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set each button write the vaiue to the\u3010Address\u3011.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Notification\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set whether permit radio button to enable notification function. After enable, can set the notification address and the value that want to write  in while excute the radio button<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Value List\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Display Each button in the radio button group corresponds to the value written to\u3010Address\u3011, while\u3010Total Buttons\u3011increase or decrease, \u3010Value List\u3011will also changed.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.17.2 \u3010Display\u3011<\/h5>\n<p>\u3010Radio Button\u3011\u3010Display\u3011paging shown as below, each of the setting meaning as follow:<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-212.png\" \/><\/p>\n<p>Figure 321\u3010Radio Button\u3011\u3010Display\u3011setting paging<\/p>\n<p>Table 188\u3010Radio Button\u3011\u3010Display\u3011setting properties<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010State\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Select the state needed to be edited. 0 and 1 buttons are provided to enable quick switching between states 0 and 1.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Text\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Direct Text Font\u3011<\/p>\n<p>Set the font of the radio button. <\/p>\n<p>\u3010Direct Text Size\u3011<\/p>\n<p>Set the size of the radio button.<\/p>\n<p>\u3010Position\u3011<\/p>\n<p>Set the position of the radio button.<\/p>\n<p>\u3010Format\u3011<\/p>\n<p>Set the format of the radio button, including bold, italic, underline<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the color of the radio button.<\/p>\n<p>\u3010Copy Attributes to All States (Button)\u3011<\/p>\n<p>Applies the text attribute setting of the current edit state to all states<\/p>\n<p>\u3010Copy Attributes to All Buttons (State)\u3011<\/p>\n<p>Apply the text attribute settings for the current edit state to all buttons<\/p>\n<p>\u3010Content\u3011<\/p>\n<p>Set the text displayed of the current edit status, either directly or by the\u3010Text Library\u3011.<\/p>\n<p>\u3010Copy Content to All States (Button)\u3011<\/p>\n<p>Applies the text settings of the current edit state to all states.<\/p>\n<p>\u3010Copy Content to All Buttons (State)\u3011<\/p>\n<p>Applies the text settings of the current edit state to all buttons.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Background\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Image\u3011<\/p>\n<p>Check whether to use image<\/p>\n<p>\u3010Source\u3011<\/p>\n<p>Set whether to use an image for the displayed background of the current editing state. When this option is checked, an\u3010Image Selector\u3011will appear asking the user to select an image either from the\u3010Image Library\u3011or from\u3010File\u3011.<\/p>\n<p>\u3010Rotate\u3011<\/p>\n<p>Set image rotation angle<\/p>\n<p>\u3010Flip\u3011<\/p>\n<p>Set the flip direction of the image, includes No Flip, X-Axis and Y-Axis.<\/p>\n<p>\u3010Tone Type\u3011<\/p>\n<p>You can choose the tone type you want to change. After selecting the type, you can choose the color from\u3010Tone Color\u3011.<\/p>\n<p>\u3010Remove Background\u3011<\/p>\n<p>You can set the color to be transparent by\u3010Choose Color\u3011.<\/p>\n<p>\u3010Background\u3011<\/p>\n<p>Check whether to enable the background. After checking, you can set the background color displayed in the current editing state from\u3010Color\u3011.<\/p>\n<p>\u3010Pressing Effect\u3011<\/p>\n<p>Set the pressing effect of the current editing state. There are two effects available for selection: None and Highlight.<\/p>\n<p>\u3010Copy to All States (Button n)\u3011<\/p>\n<p>Apply the settings of the background for the currently editing state to all buttons.<\/p>\n<p>\u3010Copy to All States (State n)\u3011<\/p>\n<p>Apply the settings of the background for the currently editing state to all states.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.17.3 \u3010External Lable\u3011<\/h5>\n<p>The\u3010Radio Button\u3011\u3010External Lable\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-213.png\" \/><\/p>\n<p>Figure 322\u3010Radio Button\u3011\u3010External Lable\u3011setting paging<\/p>\n<p>Table 189\u3010Radio Button\u3011\u3010External Lable\u3011setting properties<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Option<\/p>\n<\/td>\n<td>\n<p>Description<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Enable External Lable\u3011<\/p>\n<\/td>\n<td>\n<p>Checked, the bottom will appear the external lable settings of the object. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Direction\u3011<\/p>\n<\/td>\n<td>\n<p>Set the display direction, there are horizontal and vertical two selections.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Space\u3011<\/p>\n<\/td>\n<td>\n<p>Set the space between external lable and the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Left\/Top Lable(Direct Text)\u3011<\/p>\n<\/td>\n<td>\n<p>Fill in the text to be displayed on the left \/ top lable of the object, can be directly input or selected from\u3010Font Library\u3011. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Right\/Bottom Lable(Direct Text)\u3011<\/p>\n<\/td>\n<td>\n<p>Fill in the text to be displayed on the right \/ bottom lable of the object, can be directly input or selected from\u3010Font Library\u3011. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Text\u3011<\/p>\n<\/td>\n<td>\n<p>\u3010Direct Text Font\u3011<\/p>\n<p>Set the font of text.<\/p>\n<p>\u3010Direct Text Size\u3011<\/p>\n<p>Set the size of text, the default size is 20.<\/p>\n<p>\u3010Alignment\u3011<\/p>\n<p>Set the alignment of text.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the color of text.<\/p>\n<p>\u3010Format\u3011<\/p>\n<p>Set the format of text, includes Bold, Italic and Underline.<\/p>\n<p>\u3010Word Spacing\u3011<\/p>\n<p>Set the word space of text.<\/p>\n<p>\u3010Margin\u3011<\/p>\n<p>Set the margin of text.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Background\u3011<\/p>\n<\/td>\n<td>\n<p>Check whether to display background, set the color and opacity of background after checked. <\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the background color of external lable.<\/p>\n<p>\u3010Opacity\u3011<\/p>\n<p>Set the opacity of external lable background, the greater the value the more the background opacity is. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Border\u3011<\/p>\n<\/td>\n<td>\n<p>Check whether to display border. <\/p>\n<p>\u3010Color\/Width\u3011<\/p>\n<p>Set the color and width of border.<\/p>\n<p>\u3010Type\u3011<\/p>\n<p>Set the type of border.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h4>19.4.18 \u3010Input Display\u3011<\/h4>\n<p>\u3010Input Display\u3011is used on a\u3010Base Screen\u3011\/\u3010Window Screen\u3011\/\u3010Keypad Screen\u3011; it can display the numeric value or text currently entered with the keypad.<\/p>\n<p>The\u3010Input Display\u3011property settings dialog is as shown in the figure below, the meanings of each setting option are listed below:<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-214.png\" \/> <\/p>\n<p>Figure 323 Setting Dialog of\u3010Input Display\u3011<\/p>\n<p>Table 190 Setting Properties of\u3010Input Display\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Preview\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Preview the appearance of this object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Name\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The default name of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Comment\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the comment of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Content\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u30107-segment Display\u3011<\/p>\n<p>Set to use the 7-segment display function for the Input Display object. If this option is selected, related setting items for setting of style of the 7-segment display will appear.<\/p>\n<p><strong>Note: while this option is selected, it can only show part of text (0\/O, 1, 2, 3, 4, 5\/S, 6, 7, 8, 9\/g, A, B, C, D, E, F, h, H, L, o, P, r, u, U, Y).<\/strong><\/p>\n<p>\u3010Font\u3011<\/p>\n<p>Set the font for the text of Input Display.<\/p>\n<p>\u3010Size\u3011<\/p>\n<p>Set the size for the text of Input Display.<\/p>\n<p>\u3010Position\u3011<\/p>\n<p>Set the position for the text of Input\/Display.<\/p>\n<p>\u3010Blink\u3011<\/p>\n<p>Set the blinking function for the text of the Input\/Display. There are four blinking speeds available to choose from: None, Slow, Medium and Fast.<\/p>\n<p>\u3010Scrolling Text\u3011<\/p>\n<p>Set the scrolling text function for the text of the Input\/Display. There are four scrolling speeds available to choose from\u00a0slow to fast.<\/p>\n<p>\u3010Format\u3011<\/p>\n<p>Set the format of the text for the Input\/Display, including Bold, Italics and Underline.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the color for the text of the Input\/Display.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Border\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Type\u3011<\/p>\n<p>Set the border types for Input Display.<\/p>\n<p>\u3010Color\/Thickness\u3011<\/p>\n<p>Set the color and thickness for the border of the Input\/Display.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Background\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Image\u3011<\/p>\n<p>Check whether to use image<\/p>\n<p>\u3010Source\u3011<\/p>\n<p>Set whether to use an image for the displayed background of the current editing state. When this option is checked, an\u3010Image Selector\u3011will appear asking the user to select an image either from the\u3010Image Library\u3011or from\u3010File\u3011.<\/p>\n<p>\u3010Tone Type\u3011<\/p>\n<p>You can choose the tone type you want to change. After selecting the type, you can choose the color from\u3010Tone Color\u3011.<\/p>\n<p>\u3010Background\u3011<\/p>\n<p>Check whether to enable the background. After checking, you can set the background color displayed in the current editing state from\u3010Color\u3011.<\/p>\n<p>\u3010Animation\u3011<\/p>\n<p>Check whether to enable animated effects. <\/p>\n<p>\u3010Mode\u3011Choose whether to use static or dynamic control elements to flicker.<\/p>\n<p>  \u3010Blink\u3011Select the blinking mode, and use the numerical value to switch during dynamic control.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h4>19.4.19 \u3010Key\u3011<\/h4>\n<p>Key is used on a\u3010Base Screen\u3011\/\u3010Window Screen\u3011\/\u3010Keypad Screen\u3011. It can provide the functions for the keypad needed for inputting numeric value or text. The 9 functions include\u3010Text\u3011,\u3010ENT\u3011,\u3010CLR\u3011,\u3010BS\u3011,\u3010DEL\u3011,\u3010LEFT\u3011,\u3010RIGHT\u3011,\u3010Caps Lock\u3011and\u3010CANCEL\u3011.<\/p>\n<h5>19.4.19.1 \u3010Setting\u3011<\/h5>\n<p>The\u3010Key\u3011\u3010Setting\u3011 page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p> <img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-215.jpg\" \/><\/p>\n<p>Figure 324\u3010Setting\u3011Screen of\u3010Key\u3011<\/p>\n<p>Table 191\u3010Setting\u3011Properties of\u3010Key\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Preview\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Preview the appearance of this object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Name\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The default name of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Comment\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the comment of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Function\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the function type of the key.<\/p>\n<p>\u3010Individual Buzzer Setting\u3011<\/p>\n<p>Can individually setup buzzer setting.<\/p>\n<p>Includes 5 modes: Off, Short, Long, Short-Short, Long-Short.<\/p>\n<p>\u3010Play Audio while Pressing\u3011<\/p>\n<p>Select to play audio when the Key is pressed. An\u3010Audio Selector\u3011will appear on the right when enabled. The switch on the right of the\u3010Audio Selector\u3011can be pressed to select an audio and the switch on the left of the\u3010Audio Selector\u3011can be pressed to play the audio selected.<\/p>\n<p>\u3010Text(General)\u3011<\/p>\n<p>Text input, when the user presses it, the planned characters will be displayed on the\u3010Input Display\u3011.<\/p>\n<p>\u3010Text(Custom Letter Case)\u3011<\/p>\n<p>Text input. After selecting, you can customize the characters that can be entered when the keyboard is switched between upper and lower case.<\/p>\n<p>If select this option, you can set the content in\u3010Input text (Upper case)\u3011and\u3010Input text (Lower case)\u3011<\/p>\n<p>\u3010ENT\u3011<\/p>\n<p>The numeric value or text entered on the\u3010Keypad Screen\u3011will be submitted and the\u3010Keypad Screen\u3011will be closed after this key is pressed.<\/p>\n<p>\u3010CLR\u3011<\/p>\n<p>The numeric value or text entered on the\u3010Keypad Screen\u3011will be cleared after this key is pressed.<\/p>\n<p>\u3010BS\u3011<\/p>\n<p>A single numeric value or text prior to the position of the cursor will be deleted after this key is pressed.<\/p>\n<p>\u3010DEL\u3011<\/p>\n<p>A single numeric value or text after the position of the cursor will be deleted after this key is pressed.<\/p>\n<p>\u3010LEFT\u3011<\/p>\n<p>The cursor will move one space forward after the user presses this key.<\/p>\n<p>\u3010RIGHT\u3011<\/p>\n<p>The cursor will move one space backward after the user presses this key.<\/p>\n<p>\u3010Caps Lock\u3011<\/p>\n<p>The case mode of the text input will be changed after this key is pressed.<\/p>\n<p>\u3010Cancel\u3011<\/p>\n<p>The\u3010Keypad Screen\u3011will be closed and input will be cancelled after the user presses this key.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.19.2 \u3010Display\u3011<\/h5>\n<p>The\u3010Key\u3011\u3010Display\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p> <img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-216.png\" \/><\/p>\n<p>Figure 325\u3010Display\u3011Setting Screen of\u3010Key\u3011<\/p>\n<p>Table 192\u3010Display\u3011Setting Properties of\u3010Key\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Text\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Direct Text Font\u3011<\/p>\n<p>Set the font of the text for the key.<\/p>\n<p>\u3010Direct Text Size\u3011<\/p>\n<p>Set the size of the text for the key.<\/p>\n<p>\u3010Position\u3011<\/p>\n<p>Set the position of the text for the key.<\/p>\n<p>\u3010Blink\u3011<\/p>\n<p>Set the blinking function for the text of the key. There are four blinking speeds available to choose from: None, Slow, Medium and Fast.<\/p>\n<p>\u3010Scrolling Text\u3011<\/p>\n<p>Set the scrolling function for the text of the key. There are four scrolling speeds available to choose from slow to fast.<\/p>\n<p>\u3010Format\u3011<\/p>\n<p>Set the format of the text for the key, including Bold, Italics and Underline.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the color of the text for the key.<\/p>\n<p>\u3010Content(Direct Text)\u3011<\/p>\n<p>Set the text of the key; it can be inputted directly or acquired from the\u3010Text Library\u3011.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Background\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Background settings for the key. The background of the key can be edited below if the background setting is selected, otherwise the background will be transparent.<\/p>\n<p>\u3010Use Image\u3011<\/p>\n<p>Set to use an image for the background of the key. When this option is checked, an\u3010Image Selector\u3011will appear asking the user to select an image either from the\u3010Image Library\u3011or from a file.<\/p>\n<p>\u3010Original Size of Image\u3011<\/p>\n<p>Display the original size of the image.<\/p>\n<p>\u3010Image Position\u3011<\/p>\n<p>Appears after checking\u3010Original Size of Image\u3011, you can select the position of the picture to be displayed.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the background color of the key. This setting item will appear if\u3010Use Image\u3011was not selected.<\/p>\n<p>\u3010Blink\u3011<\/p>\n<p>Set the blinking function for the background of the key. There are four blinking speeds available to choose from: None, Slow, Medium and Fast.<\/p>\n<p>\u3010Animation\u3011<\/p>\n<p>Check whether to enable animated effects. <\/p>\n<p>\u3010Mode\u3011Choose whether to use static or dynamic control elements to flicker.<\/p>\n<p>  \u3010Blink\u3011Select the blinking mode, and use the numerical value to switch during dynamic control.<\/p>\n<p>\u3010Pressing Effect\u3011<\/p>\n<p>Set the pressing effect of the key. There are two effects available for selection: None and Highlight.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h4>19.4.20 \u3010Limit Value Display\u3011<\/h4>\n<p>\u3010Limit Value Display\u3011is used on a\u3010Base Screen\u3011\/\u3010Window Screen\u3011\/\u3010Keypad Screen\u3011, it can display the maximum or minimum input value allowed for the current keypad.<\/p>\n<p>The\u3010Limit Value Display\u3011settings page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p> <img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-217.png\" \/><\/p>\n<p>Figure 326 Setting Dialog of\u3010Limit Value Display\u3011<\/p>\n<p>Table 193 Setting Properties of\u3010Limit Value Display\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Preview\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Previews the appearance of this object. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Name\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The default name of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Comment\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the comment of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Content\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Limit Value Type\u3011<\/p>\n<p>Set to display\u3010Max\u3011or\u3010Min\u3011for Limit Value Display.<\/p>\n<p>\u30107-segment Display\u3011<\/p>\n<p>Set to use the 7-segment display function for the Limit Value Display object. If this option is selected, related setting items for setting of style of the 7-segment display will appear, including outline, filled, flat.<\/p>\n<p><strong>Note: When using the 7-segment display function, only part of the text (0 \/ O, 1, 2, 3, 4, 5 \/ S, 6, 7, 8, 9 \/ g, A, B, C, D, E , F, h, H, L, o, P, r, u, U, Y) can be displayed.<\/strong><\/p>\n<p>\u3010Font\u3011<\/p>\n<p>Set the font of the text for the Limit Value Display.<\/p>\n<p>\u3010Size\u3011<\/p>\n<p>Set the size of the text for the Limit Value Display.<\/p>\n<p>\u3010Position\u3011<\/p>\n<p>Set the position of the text for the Limit Value Display.<\/p>\n<p>\u3010Blink\u3011<\/p>\n<p>Set the blinking function for the text of the Limit Value Display. There are four blinking speeds available to choose from: None, Slow, Medium and Fast.<\/p>\n<p>\u3010Scrolling Text\u3011<\/p>\n<p>Set the scrolling text function for the text of the Limit Value Display. There are four scrolling speeds available to choose from slow to fast.<\/p>\n<p>\u3010Format\u3011<\/p>\n<p>Set the format of the text for the Limit Value Display, including Bold, Italics and Underline.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the color of the text for the Limit Value Display.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Border\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Border settings for the Limit Value Display. The border of the Limit Value Display can be edited below if border setting is selected, otherwise the Limit Value Display will be displayed with no border.<\/p>\n<p>\u3010Type\u3011<\/p>\n<p>Set the border types for the Limit Value Display.<\/p>\n<p>\u3010Color\/Thickness\u3011<\/p>\n<p>Set the color and thickness for the border of the Limit Value Display.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Background\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Background settings for the Limit Value Display. The background of the Limit Value Display can be edited below if background setting is selected, otherwise the background will be transparent.<\/p>\n<p>\u3010Use Image\u3011<\/p>\n<p>Set to use an image for the background of Limit Value Display. When this option is checked, an\u3010Image Selector\u3011will appear asking the user to select an image either from the\u3010Image Library\u3011or from a file.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the background color of the Limit Value Display. This setting item will appear if \u3010Use Image\u3011 was not selected.<\/p>\n<p>\u3010Blink\u3011<\/p>\n<p>Set the blinking function for the background of the Limit Value Display. There are four blinking speeds available to choose from: None, Slow, Medium and Fast.<\/p>\n<p>\u3010Animation\u3011<\/p>\n<p>Check whether to enable animated effects. <\/p>\n<p>\u3010Mode\u3011Choose whether to use static or dynamic control elements to flicker.<\/p>\n<p>  \u3010Blink\u3011Select the blinking mode, and use the numerical value to switch during dynamic control.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h4>19.4.21 \u3010Animated Graphic\u3011<\/h4>\n<p>\u3010Animated Graphic\u3011can control multiple states. The state, position and size displayed by\u3010Animated Graphic\u3011can be changed by setting specific control addresses in order to achieve effects such as moving objects, zooming in, zooming out etc.<\/p>\n<h5>19.4.21.1 \u3010Setting\u3011<\/h5>\n<p>The\u3010Animated Graphic\u3011\u3010Setting\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p> <img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-218.png\" \/><\/p>\n<p>Figure 327\u3010Setting\u3011Screen of\u3010Animated Graphic\u3011<\/p>\n<p>Table 194\u3010Setting\u3011Properties of\u3010Animated Graphic\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Preview\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Preview the appearance of this object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Name\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The default name of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Comment\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the comment of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Update\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Provide user can select a suitable speed to get the latest data under different situation, such as you would like to get the latest data or adjust the object on the screen to display first, etc.<\/p>\n<p>Provide three modes:<\/p>\n<p>\u3010once\u3011: update once only when switch to this page or use the system tag\u3010OP_UPDATE_SCREEN_OBJECTS\u3011, update once when trigger once a time, it will keep update if the monitor address is internal address.<\/p>\n<p>\u3010normal\u3011: normal update speed.<\/p>\n<p>\u3010fast\u3011: the fastest update speed.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Graphic\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Number of States\u3011<\/p>\n<p>Set the number of states for the animated graphic.<\/p>\n<p>\u3010State Control\u3011<\/p>\n<p>Set the state changing method of the animated graphic;\u3010Automatic\u3011mode means that the state of the animated graphic will change regularly.<\/p>\n<p>\u3010Dynamic\u3011mode indicates the state of the dynamic graphic, which will change according to the value\u3010State Control Address\u3011.<\/p>\n<p>\u3010Time Interval\u3011<\/p>\n<p>Set the state change time interval for the animated graphic.<\/p>\n<p>\u3010State Control Address\u3011<\/p>\n<p>Sets the time interval for the dynamic graphic state change, and change according to the register\u2019s value.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Movement\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Type\u3011<\/p>\n<p>Set the position changing method of the animated graphic.<\/p>\n<p>\u3010Dynamic\u3011mode means that the position of the animated graphic will change according to the numeric value saved on the\u3010Position Control Address\u3011.<\/p>\n<p>\u3010Still\u3011mode means that the position of the animated graphic will remain the same.<\/p>\n<p>\u3010Polyline\u3011mode means that the position of the animated graphic will change according to the planning path or position.<\/p>\n<p>\u3010Position Control Address\u3011<\/p>\n<p>Divided into X-axis and Y-axis control addresses. If the\u3010Type\u3011is\u3010Dynamic\u3011, the user can move the animated graphic by changing the numeric value saved in the X-axis and Y-axis control address.<\/p>\n<p>\u3010Move Control\u3011<\/p>\n<p>Display when\u3010Type\u3011select as\u3010Polyline\u3011, main to set the path or position under\u3010Polyline\u3011mode.<\/p>\n<p>\u3010Along Path\u3011<\/p>\n<p>The animated graph change the position according to the planning path.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-219.png\" \/><\/p>\n<p>\u3010Along Position\u3011<\/p>\n<p>The animated graph change the position according to the planning position(point).<\/p>\n<p>\u3010Dynamically Change Position\u3011<\/p>\n<p>The animated graph change the position(point) according to the\u3010Position Control Address\u3011value, if\u3010Position Control Address\u3011=0 display point 1, \u3010Position Control Address\u3011=5 display point 6.<\/p>\n<p>\u3010Rate\u3011<\/p>\n<p>Animated graph moving speed, the unit is v\/s.<\/p>\n<p>\u3010Edit Path\u3011<\/p>\n<p>Will show up this option when\u3010Type\u3011select as\u3010Polyline\u3011, click to show the figure as below. Provide user to change the position by modify x-axis and y-axis or adjust the path by\u3010Insert\u3011and\u3010Remove\u3011.<\/p>\n<p><img decoding=\"async\" alt=\"C:\\Users\\chien yu\\Desktop\\fv 1.5 pic\\t125_.JPG\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-220.jpg\" \/><\/p>\n<p>Except adjust the path by\u3010Edit Path\u3011also can directly edit on the work space by dragging, table as follow:<\/p>\n<ul>\n<li>Add point : click the animated graph, move the mouse to the desired path and will show up a hand sign, click the left botton of the mouse and move to the desired new point.<\/li>\n<li>Adjust point : click the animated graph, move the mouse to the desired position and will show up a arrow sign, click the left botton of the mouse and move to the desired new point.<\/li>\n<li>Remove point : click the animated graph, move the mouse to the desired point and will show up a arrow sign, click the right botton of the mouse to remove the point.<\/li>\n<\/ul>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td><\/td>\n<td>\n<p>Click Object<\/p>\n<\/td>\n<td>\n<p>Add\/Adjust\/Remove<\/p>\n<\/td>\n<td>\n<p>Result<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Add point<\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-221.jpg\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-222.jpg\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-223.jpg\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Adjust point<\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-224.jpg\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-225.jpg\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-226.jpg\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Remove point<\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-227.jpg\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-228.jpg\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-229.jpg\" \/><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Data Type\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the data type of the animated graphic; this setting will appear when the selection of the\u3010Type\u3011for\u3010State Control\u3011or\u3010Movement\u3011is controlled by specific addresses.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.21.2 \u3010Display\u3011<\/h5>\n<p>The\u3010Animated Graphic\u3011\u3010Display\u3011page is as shown in the figure below, the meanings of each setting are listed below:<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-230.png\" \/><\/p>\n<p>Figure 328\u3010Display\u3011Setting Screen of\u3010Animated Graphic\u3011<\/p>\n<p>Table 195\u3010Display\u3011Setting Properties of\u3010Animated Graphic\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010State\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Select the state needed to be edited. 0 and 1 buttons are provided to enable quick switching between states 0 and 1.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Text\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Direct Text Font\u3011<\/p>\n<p>Set the font of the text for the current editing state.<\/p>\n<p>\u3010Direct Text Size\u3011<\/p>\n<p>Set the size of the text for the current editing state.<\/p>\n<p>\u3010Position\u3011<\/p>\n<p>Set the position of the text for the current editing state.<\/p>\n<p>\u3010Blink\u3011<\/p>\n<p>Set the blinking function for the text of the current editing state. There are four blinking speeds available to choose from: None, Slow, Medium and Fast.<\/p>\n<p>\u3010Scrolling Text\u3011<\/p>\n<p>Set the scrolling text function for the text of the current editing state. There are four scrolling speeds available to choose from slow to fast.<\/p>\n<p>\u3010Format\u3011<\/p>\n<p>Set the format of the text for the current editing state, including Bold, Italics and Underline.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the color of the text for the current editing state.<\/p>\n<p>\u3010Copy Attributes to All States\u3011<\/p>\n<p>The text properties for the current editing state is applied to all states.<\/p>\n<p>\u3010Content (Direct Text)\u3011<\/p>\n<p>Set the text of the current editing state. It can be inputted directly or acquired from the\u3010Text Library\u3011.<\/p>\n<p>\u3010Copy Contents to All States\u3011<\/p>\n<p>Apply the settings of the text for the current editing state to all states.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Background\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Background settings for the current editing state. The displayed background of the animated graphic can be edited below if background setting is selected. Otherwise, the background of the currently editing state will be transparent.<\/p>\n<p>\u3010Use Image\u3011<\/p>\n<p>Set to use an image for the displayed background of the current editing state. When this option is checked, an\u3010Image Selector\u3011will appear asking the user to select an image either from the\u3010Image Library\u3011or from a file.<\/p>\n<p>\u3010Original Size of Image\u3011<\/p>\n<p>Display the original size of the image.<\/p>\n<p>\u3010Image Position\u3011<\/p>\n<p>Appears after checking\u3010Original Size of Image\u3011, you can select the position of the picture to be displayed.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the background color of the current editing state. This setting item will appear if\u3010Use Image\u3011was not selected.<\/p>\n<p>\u3010Blink\u3011<\/p>\n<p>Set the blinking function for the background of the current editing state. There are four blinking speeds available to choose from: None, Slow, Medium and Fast.<\/p>\n<p>\u3010Remove Background\u3011<\/p>\n<p>Choose transparent color through\u3010Choose Color\u3011.<\/p>\n<p>\u3010Rotate\u3011<\/p>\n<p>Rotate the graph, includes CW 0 Degrees, CW 90 Degrees, CW 180 Degrees and CW 270 Degrees.<\/p>\n<p>\u3010Flip\u3011<\/p>\n<p>Flip the graph, includes No Flip, X-Axis and Y-Axis.<\/p>\n<p>\u3010Animation\u3011<\/p>\n<p>Check whether to enable animated effects. <\/p>\n<p>\u3010Mode\u3011Choose whether to use static or dynamic control elements to flicker.<\/p>\n<p>  \u3010Blink\u3011Select the blinking mode, and use the numerical value to switch during dynamic control.<\/p>\n<p>\u3010Copy to All States\u3011<\/p>\n<p>Apply the settings of the background for the current editing state to all states.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Border\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the object border.<\/p>\n<p>\u3010Color\/Width\u3011<\/p>\n<p>Set the color and width of the border.<\/p>\n<p>\u3010Type\u3011<\/p>\n<p>Set the type of the border.<\/p>\n<p>\u3010Copy to All States\u3011<\/p>\n<p>Apply the settings of the border for the current editing state to all states.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h4>19.4.22 \u3010Rotation Indicator\u3011<\/h4>\n<p><strong>\u3010<\/strong>Rotation Indicator<strong>\u3011<\/strong>is made up of multiple indicators arranged as a ring. Designers can set the rotation display mode or speed by the PLC register or HMI internal address.<\/p>\n<h5>19.4.22.1 \u3010Setting\u3011<\/h5>\n<p>The\u3010Rotation Indicator\u3011\u3010Setting\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-231.png\" \/><\/p>\n<p>Figure 329\u3010Setting\u3011Screen of\u3010Rotation Indicator\u3011<\/p>\n<p>Table 196\u3010Setting\u3011Properties of\u3010Rotation Indicator\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Preview\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Preview the appearance of this object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Name\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The default name of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Comment\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the comment of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Update\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Provide user can select a suitable speed to get the latest data under different situation, such as you would like to get the latest data or adjust the object on the screen to display first, etc.<\/p>\n<p>Provide three modes:<\/p>\n<p>\u3010once\u3011: update once only when switch to this page or use the system tag\u3010OP_UPDATE_SCREEN_OBJECTS\u3011, update once when trigger once a time, it will keep update if the monitor address is internal address.<\/p>\n<p>\u3010normal\u3011: normal update speed.<\/p>\n<p>\u3010fast\u3011: the fastest update speed.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Number of Lamps\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the number of indicators to display in the\u3010Rotation Indicator\u3011object. There can be 8 to 40 indications in multiples of 4. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Degree-0 Position\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the zero degree position of\u3010Rotation Indicator\u3011which is the starting position when rotating, including top, bottom, left, and right.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Display Control Address\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the display control address for the\u3010Rotation Indicator\u3011object.<\/p>\n<p>HMI will reads the\u3010Display Control Address\u3011. When the range of read number is between 0 ~ 7,\u3010Rotation Indicator\u3011is displayed following the table below. If the range of reading number is not 0 ~ 7, the\u3010Rotation Indicator\u3011will retain the previous displayed mode.<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Value<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Display mode<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>0<\/p>\n<\/td>\n<td>\n<p>All indicators will display OFF state.<\/p>\n<p>HMI does not read the value of\u3010Velocity Control Address\u3011and\u3010Angle Control Address\u3011.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>1<\/p>\n<\/td>\n<td>\n<p>The\u3010Rotation Indicator\u3011displays the indicator clockwise to the zero degree position, following the specified angle of the\u3010Angle Control Address\u3011.<\/p>\n<p>HMI does not read the value of\u3010Velocity Control Address\u3011.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>2<\/p>\n<\/td>\n<td>\n<p>The\u3010Rotation Indicator\u3011displays the indicator counterclockwise to the zero degree position, following the specified angle of the\u3010Angle Control Address\u3011.<\/p>\n<p>HMI does not read the value of\u3010Velocity Control Address\u3011.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>3<\/p>\n<\/td>\n<td>\n<p>The indicator light rotates clockwise, and its velocity of the rotation speed depends on the value of the\u3010Velocity Control Address\u3011.<\/p>\n<p>HMI does not read the value of\u3010Angle Control Address\u3011.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>4<\/p>\n<\/td>\n<td>\n<p>The indicator light rotates counterclockwise, and its velocity of rotation speed depends on the value of the\u3010Velocity Control Address\u3011.<\/p>\n<p>HMI does not read the value of\u3010Angle Control Address\u3011.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>5<\/p>\n<\/td>\n<td>\n<p>The indicator display is set to the degree zero position.<\/p>\n<p>HMI does not read the value of\u3010Velocity Control Address\u3011or the\u3010Angle Control Address\u3011.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>6<\/p>\n<\/td>\n<td>\n<p>All indicators will display the ON state.<\/p>\n<p>HMI does not read the value of\u3010Velocity Control Address\u3011or the\u3010Angle Control Address\u3011.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>7<\/p>\n<\/td>\n<td>\n<p>Flashes all indicators. <\/p>\n<p>The blinking rate changes according to the value of the\u3010Velocity Control Address\u3011.<\/p>\n<p>HMI does not read the value of\u3010Angle Control Address\u3011.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Velocity Control Address\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Sets the rotation speed or blinking rate for the\u3010Rotation Indicator\u3011object.<\/p>\n<p>If the value of \u3010Display Control Address\u3011is 3 or 4, its range is 0 ~ 1000 at a multiple of 10ms.<\/p>\n<p>If the value of\u3010Display Control Address\u3011is 7, its range is 0 ~ 100 at a multiple of 100ms.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Angle Control Address\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Sets the angle for the\u3010Rotation Indicator\u3011object.<\/p>\n<p>Its range is 0 ~ 360. If the value is greater than 360, \u3010Rotation Indicator\u3011will retain the previously displayed mode.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Data Type\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the data type of the\u3010Rotation Indicator\u3011.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Ring\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Width\u3011<\/p>\n<p>Sets the width of the ring for the\u3010Rotation Indicator\u3011.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Sets the color of the ring for the \u3010Rotation Indicator\u3011.<\/p>\n<p>If the color setting is not checked, it will be displayed as transparent.<\/p>\n<p>\u3010Border Thickness\u3011<\/p>\n<p>Sets the border width of the ring for the\u3010Rotation Indicator\u3011.<\/p>\n<p>\u3010Border Color\u3011<\/p>\n<p>Sets the border color of the ring for the\u3010Rotation Indicator\u3011.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Lamp\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Radius\u3011<\/p>\n<p>Sets the radius of the indicator for the\u3010Rotation Indicator\u3011.<\/p>\n<p>\u3010ON Appearance\u3011<\/p>\n<p>After clicking the setting, you can select the\u3010Image\u3011and \u3010Color\u3011when the lamp is on in the pop-up window.<\/p>\n<p>\u3010OFF Appearance\u3011<\/p>\n<p>After clicking the setting, you can select the\u3010Image\u3011and \u3010Color\u3011when the lamp is off in the pop-up window.<\/p>\n<p>\u3010Blink Appearance\u3011<\/p>\n<p>Sets the color or picture of the flashing state for the\u3010Rotation Indicator\u3011. If you check the \u201cUse Image\u201d option, the \u3010Image Selector\u3011will appear for users to choose an image from\u3010Image Library\u3011 or from a file.<\/p>\n<p>\u3010Border Thickness\u3011<\/p>\n<p>Sets the border width of the lamp for the\u3010Rotation Indicator\u3011.<\/p>\n<p>\u3010Border Color\u3011<\/p>\n<p>Sets the border color of the lamp for the\u3010Rotation Indicator\u3011.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h4>19.4.23 \u3010Gif Display\u3011<\/h4>\n<p>\u3010Gif Display\u3011can display .gif files as a dynamic image.<\/p>\n<h5>19.4.23.1 \u3010Setting\u3011<\/h5>\n<p>The\u3010Gif Display\u3011\u3010Setting\u3011page is a shown in the figure below. Each option is explained.<\/p>\n<p> <img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-232.png\" \/><\/p>\n<p>Figure 330 \u3010Setting\u3011Screen of\u3010GIF Display\u3011<\/p>\n<p>Table 197\u3010Setting\u3011Properties of\u3010GIF Display\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Preview\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Preview the appearance of this object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Name\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The default name of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Comment\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the comment of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Basic\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Open FIle\u3011<\/p>\n<p>Select a GIF format image on the computer.<\/p>\n<p>\u3010Size\u3011<\/p>\n<p>Select the size of the GIF image.<\/p>\n<p>\u3010Original Size\u3011<\/p>\n<p>Set the image to be its original size. The image size cannot be changed in the work space. If this option is not changed, the size is adjustable.<\/p>\n<p>\u3010Fixed Ratio\u3011<\/p>\n<p>The image size can be adjusted but its original aspect ratio will be maintained.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Animation\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Enable by Bit\u3011<\/p>\n<p>Set whether the GIF image is dynamically controlled by this bit.<\/p>\n<p>\u3010DynamicSpeed\u3011<\/p>\n<p>Set whether the change speed of the GIF dynamic graph is controlled by the register<\/p>\n<p>\u3010Speed\u3011<\/p>\n<p>Adjust the playback speed of the GIF. When\u3010DynamicSpeed\u3011is unchecked, you can set the constant value of the change dpeed, when check\u3010DynamicSpeed\u3011, you can set register in this field. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Dynamic Preview\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The GIF with the current settings applied is previewed here.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h4>19.4.24 \u3010Historic Trend\u3011<\/h4>\n<p>\u3010Historic Trend\u3011is a curve object used to read the data in the Recording Buffer of the\u3010Data Logger\u3011, in which the X value is time and the Y value is the data captured by the\u3010Data Logger\u3011. Its functions are as follows:<\/p>\n<ul>\n<li>View the data of the\u3010Data Logger\u3011.<\/li>\n<li>Pause or start updating the data of the\u3010Data Logger\u3011through the\u3010Sub Switch\u3011, and clear the displayed data. It can also zoom or move the figure.<\/li>\n<\/ul>\n<h5>19.4.24.1 \u3010General\u3011<\/h5>\n<p>\u3010Historic Trend\u3011\u3010General\u3011setting paging as shown below, the meaning of each setting is as follows :<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-233.png\" \/><\/p>\n<p>Figure 331\u3010General\u3011Setting Screen of\u3010Historic Trend\u3011<\/p>\n<p>Table 198\u3010General\u3011Setting Properties of\u3010Historic Trend\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Preview\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Preview the appearance of this object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Name\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The default name of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Comment\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the comment of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Basic\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Data Log ID\u3011<\/p>\n<p>Select the ID of the Data Log to track.<\/p>\n<p>\u3010Source\u3011<\/p>\n<p>Select the\u3010Historic Trend\u3011source:\u3010Data Log\u3011or\u3010File\u3011.<\/p>\n<p>\u3010Data Log\u3011<\/p>\n<p>Use\u3010Data Log\u3011as the source of the data. Refer to <strong>Chapter 7 -Data Log<\/strong>.<\/p>\n<p>\u3010File\u3011<\/p>\n<p>Use an exported CSV or TXT file as the source of the data. When this option is selected, set the\u3010File Address\u3011. This register value corresponds to the position of the file in a path. For example, if the the register was R50, a 0 in R50 corresponds to the first file in the path, 1 corresponds to the second, and so on.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-234.jpg\" \/><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-235.jpg\" \/><\/p>\n<p>\u3010Continue Files\u3011<\/p>\n<p>Supports only for PC model, this mode will read the export files continuously from the folder so the users no need to import files all the time when viewing old files.<\/p>\n<p>\u3010Mode\u3011<\/p>\n<p>Select the\u3010Historic Trend\u3011display mode: \u3010Time Mode\u3011or\u3010Index Mode\u3011.<\/p>\n<p>\u3010Time Mode\u3011<\/p>\n<p>Set the X-axis of the\u3010Historic Trend\u3011as time.<\/p>\n<p>\u3010Index Mode\u3011<\/p>\n<p>Set the X-axis of the\u3010Historic Trend\u3011as a specified index.<\/p>\n<p>\u3010Two Y Axes Mode\u3011<\/p>\n<p>Check whether to display two Y-axes on the graph. <\/p>\n<p>\u3010Refresh data automatically\u3011<\/p>\n<p>When source choose as\u3010file\u3011will appear this option, check this option, it will automatically refresh when new data comes.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Global Display Range\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Represents the range that can be displayed.<\/p>\n<p>\u3010Min\u3011<\/p>\n<p>Set the minimum Global Range value for the Y-axis.<\/p>\n<p>\u3010Max\u3011<\/p>\n<p>Set the maximum Global Range value for the Y-axis.<\/p>\n<p><strong>Note: The\u3010Global Display Range\u3011represents the range that can be displayed. If\u3010Max\u3011is 100 and\u3010Min\u3011is 0, data exceeding this range will not be able to be displayed.<\/strong><\/p>\n<p>\u3010Display Precision\u3011<\/p>\n<p>Set the number of decimal places represented for Y-axis values.<\/p>\n<p>\u3010Exponential Format\u3011<\/p>\n<p>When selected, the Y-axis values will be displayed in exponential form.<\/p>\n<p>\u3010X Axis (Index Points) Max\u3011<\/p>\n<p>If the\u3010Index Mode\u3011is set to\u3010Index Mode\u3011the maximum X-axis index point can be selected.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.24.2 \u3010Curve\u3011<\/h5>\n<p>\u3010Historic Trend\u3011\u3010Curve\u3011setting paging as shown below, the meaning of each setting is as follows :<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-236.png\" \/><\/p>\n<p>Figure 332\u3010Curve\u3011Setting Screen of\u3010Historic Trend\u3011<\/p>\n<p>Table 199\u3010Curve\u3011Setting Properties of\u3010Historic Trend\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Curve\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010No. of Curve\u3011<\/p>\n<p>Select the number of curves. The maximum curve lines are up to 32.<\/p>\n<p>\u3010Visibility Mask\u3011<\/p>\n<p>Select whether to use visibility mask to control the visibility of the each curve. While selecting, use should assign the 32bit UINT register as the mask, in which the 0 bit control the display of the curve 0, and so on.<\/p>\n<p>\u3010Display Range\u3011<\/p>\n<p>Used to set the display mode for the display range of the curve. It is usually one of the two following types:<\/p>\n<ul>\n<li>\u3010Global\u3011<\/li>\n<\/ul>\n<p>The display ranges of all the curves are identical to the\u3010Global Display Range\u3011.<\/p>\n<ul>\n<li>\u3010Individual\u3011<\/li>\n<\/ul>\n<p>The display range of all the curves can be different from the\u3010Global Display Range\u3011.<\/p>\n<p><strong>Explanation: When to set\u3010Display Range\u3011as\u3010Individual\u3011- When the value ranges of the number of curves are different, for example when the value range of curve a is 0~10, and curve b is 0~1000, it can be discovered that the degree of changes for curve a will be difficult to observe if the two curves are placed in the same figure. This is when\u3010Display Range\u3011can be set as\u3010Individual\u3011and the display range of each curve can be defined. The system will automatically zoom the value of the curves according to the value in\u3010Global Display Range\u3011. Take this case for example, if the value in\u3010Global Display Range\u3011is 0~100, when the value of curve a is 5, the system will zoom it to 50 and when the value of curve b is 500, the system will also zoom it into 50, and so on.<\/strong><\/p>\n<p><strong>Another time to use-<\/strong><\/p>\n<p><strong>When\u3010Global Display Range\u3011is set to 0~100,\u3010Display Precision\u3011is set to 1, then the axis will display 0.0~100.0 at this time, and the value of curve a is 0~1000. When the curve A value is 500, it will be It is scaled to 50.0.<\/strong><\/p>\n<p>The curve property table is described below:<\/p>\n<p>\u3010Y Source\u3011<\/p>\n<p>Set the source for the Y value of the curve; the selection of the source depends on the setting of the\u3010Data Logger\u3011.<\/p>\n<p>\u3010Display Name\u3011<\/p>\n<p>Set the name of the curve.<\/p>\n<p>\u3010Y Max\u3011<\/p>\n<p>Set the maximum Individual Display Range value for the Y value of the curve, this option will appear if\u3010Display Range\u3011is\u3010Individual\u3011..<\/p>\n<p>\u3010Y Min\u3011<\/p>\n<p>Set the minimum Individual Display Range value for the Y value of the curve, this option will appear if\u3010Display Range\u3011is\u3010Individual\u3011..<\/p>\n<p>\u3010Cursor Display\u3011<\/p>\n<p>Four options are available: None, Scale Data, Original Data, and Both. For example, if the\u3010Global Display Range\u3011was set to 0~100, the\u3010Display Range\u3011was set to individual, \u3010Y Max\u3011is set to 200 and\u3010Y Min\u3011is set to 0, when Y is 60, the cursor is set such that the scaled value of 30 is displayed. If the\u3010Cursor Display\u3011is set to orginal, the original value of 60 is displayed.<\/p>\n<p>\u3010Y Axis\u3011<\/p>\n<p>If\u3010Two Y Axes Mode\u3011is selected, the setting is used to decide the curve\u2019s reference y-axis.<\/p>\n<p>\u3010Line Color\u3011<\/p>\n<p>Set the line color of the curve.<\/p>\n<p>\u3010Line Type\u3011<\/p>\n<p>Set the line type of curve.<\/p>\n<p>\u3010Line Width\u3011<\/p>\n<p>Set the curve width.<\/p>\n<p>\u3010Symbol\u3011<\/p>\n<p>Check whether to display curve\u2019s symbol.<\/p>\n<p>\u3010Symbol Color\u3011<\/p>\n<p>Set the symbol color.<\/p>\n<p>\u3010Symbol Type\u3011<\/p>\n<p>Set the symbol type.<\/p>\n<p>\u3010Fill\u3011<\/p>\n<p>Check whether to fill up the curve.<\/p>\n<p>\u3010Fill Color\u3011<\/p>\n<p>Set the fill color.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.24.3 \u3010Advanced Curve\u3011<\/h5>\n<p>\u3010Historic Trend\u3011\u3010Advanced Curve\u3011setting paging as shown below, the meaning of each setting is as follows :<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-237.png\" \/><\/p>\n<p>Figure 333\u3010Advanced Curve\u3011Setting Screen of\u3010Historic Trend\u3011<\/p>\n<p>Table 200\u3010Advanced Curve\u3011Setting Properties of\u3010Historic Trend\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Advnaced Curve Display Mode\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Select to enable the advanced curve display mode.<\/p>\n<p>\u3010Mode\u3011<\/p>\n<p>There are four filter modes for setting the curve display, which are:<\/p>\n<p>\u3010Single Value Filter Mode (&gt;=)\u3011Display all curves greater than or equal to the filtered value.<\/p>\n<p>\u3010Single Value Filter Mode (&gt;)\u3011Display all curves greater than the filtered value.<\/p>\n<p>\u3010Single Value Filter Mode (&lt;)\u3011Display all curves less than the filtered value.<\/p>\n<p>\u3010Single Value Filter Mode (&lt;=)\u3011Display all curves less than or equal to the filtered value.<\/p>\n<p>The following is an example:<\/p>\n<p>Select the mode\u3010Single Value Filter Mode (&gt;=)\u3011and set this value to 30.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-238.png\" \/> <img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-239.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Filter Value\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the filter value of the filter mode.<\/p>\n<p>\u3010Dynamic Range(32bit-FLOAT)\u3011<\/p>\n<p>Check whether the filter value can be changed according to the content of the specified address. The data type is 32-bit floating point.<\/p>\n<p>\u3010Y Axis (Left)\u3011<\/p>\n<p>Set the filter value of the left Y axis.<\/p>\n<p>\u3010Y Axis (Right)\u3011<\/p>\n<p>Set the right Y-axis filter value (this setting can only be set when\u3010Two Y Axes Mode\u3011is checked).<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.24.4 \u3010Display\u3011<\/h5>\n<p>\u3010Historic Trend\u3011\u3010Display\u3011setting paging as shown below, the meaning of each setting is as follows :<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-240.png\" \/><\/p>\n<p>Figure 334\u3010Display\u3011Setting Screen of\u3010Historic Trend\u3011<\/p>\n<p>Table 201\u3010Display\u3011Setting Properties of\u3010Historic Trend\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Border\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Select to display the border.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the color of the border.<\/p>\n<p>\u3010Type\u3011<\/p>\n<p>Set the border type.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Background\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Select to display the background.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the color of the background.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Graph Background\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Select to display the graph background.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the color of the graph background.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Cursor\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Select to display the cursor.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the color of the cursor.<\/p>\n<p>\u3010Show Cursor and Curve Value\u3011\u3010Display\u3011<\/p>\n<p>Set the visibility of cursor values. If\u3010Always\u3011is set, the cursor and curve values are always shown. If\u3010Controlled by Bit\u3011is selected, the visibility of the values depends on a specified bit.  <\/p>\n<p>\u3010Show Curve Name\u3011\u3010Display\u3011<\/p>\n<p>Set the visibility of the curve name. If\u3010Always\u3011is set, the curve name is always shown. If\u3010Controlled by Bit\u3011 is selected, the visibility of the curve name depends on the specified bit.<\/p>\n<p>\u3010Cursor Original Address (Raw Data)\u3011<\/p>\n<p>Display the original value where the cursor place.<\/p>\n<p>\u3010Font\u3011<\/p>\n<p>Set the font and size of cursor values.<\/p>\n<p>\u3010Background\u3011<\/p>\n<p>Set the background color of the cursor values.<\/p>\n<p>\u3010Text\u3011<\/p>\n<p>Set the text color of the cursor values.<\/p>\n<p>\u3010Opacity\u3011<\/p>\n<p>Set the background opacity of the cursor values.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.24.5 \u3010Axis\u3011<\/h5>\n<p>\u3010Historic Trend\u3011\u3010Axis\u3011setting paging as shown below, the meaning of each setting is as follows :<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-241.jpg\" \/><\/p>\n<p>Figure 335\u3010Axis\u3011Setting Screen of\u3010Historic Trend\u3011<\/p>\n<p>Table 202\u3010Axis\u3011Setting Properties of\u3010Historic Trend\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Common\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Axis Color\u3011<\/p>\n<p>Set the color of the axis.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Time Range\u3011(Time Mode)<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the time range of the X-axis<\/p>\n<p>\u3010Day\u3011<\/p>\n<p>Set the number of days.<\/p>\n<p>\u3010Hour\u3011<\/p>\n<p>Set the number of hours.<\/p>\n<p>\u3010Min.\u3011<\/p>\n<p>Set the number of minutes.<\/p>\n<p>\u3010Sec.\u3011<\/p>\n<p>Set the number of seconds.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010X-axis (Time)\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Number of Major Division\u3011<\/p>\n<p>Sets the number of major divisions on the X-axis.<\/p>\n<p>\u3010Number of Sub Division\u3011<\/p>\n<p>Sets the number of sub divisions on the X-axis.<\/p>\n<p>\u3010Show Tick\u3011<\/p>\n<p>Select to display the ticks.<\/p>\n<p>\u3010Show Value\u3011(Index Mode)<\/p>\n<p>Select to display the value.<\/p>\n<p>\u3010Show Date\u3011<\/p>\n<p>Select to display the date on the X-axis, and sets the display format of the date.<\/p>\n<p>\u3010Show Time\u3011<\/p>\n<p>Select to display the time on the X-axis, and sets the display format of the time.<\/p>\n<p>\u3010Value\/Tick Color\u3011<\/p>\n<p>Set the colors of the time and ticks.<\/p>\n<p>\u3010Show Grid\u3011<\/p>\n<p>Select to display vertical gridlines, and sets the color of the gridlines.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Y-axis\u3011 \u3010Division\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Number of Major Division\u3011<\/p>\n<p>Set the number of major divisions on the Y-axis.<\/p>\n<p>\u3010Number of Sub Division\u3011<\/p>\n<p>Set the number of sub divisions on the Y-axis.<\/p>\n<p>\u3010Show Tick\u3011<\/p>\n<p>Select to display the ticks on the Y-axis.<\/p>\n<p>\u3010Show Value\u3011<\/p>\n<p>Select to display the values on the Y-axis. <\/p>\n<p>\u3010Value\/Tick Color\u3011<\/p>\n<p>Set the colors of the values and ticks.<\/p>\n<p>\u3010Show Grid\u3011<\/p>\n<p>Select whether to display horizontal gridlines, and sets the color of the gridlines.<\/p>\n<p>\u3010Font\u3011<\/p>\n<p>Set the font and size of the scale<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Y-axis\u3011 \u3010Position\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Position\u3011<\/p>\n<p>Set the Y-axis position:\u3010Left\u3011or\u3010Right\u3011 <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.24.6 \u3010Advanced\u3011<\/h5>\n<p>\u3010Historic Trend\u3011\u3010Advanced\u3011setting paging as shown below, the meaning of each setting is as follows :<\/p>\n<p> <img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-242.png\" \/><\/p>\n<p>Figure 336\u3010Advanced\u3011Setting Screen of\u3010Historic Trend\u3011<\/p>\n<p>Table 203\u3010Advanced\u3011Setting Properties of\u3010Historic Trend\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Advanced\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Start\/Stop State Address\u3011<\/p>\n<p>Set the\u3010Data Block Graph\u3011will start\/stop at the specified address. Only the display unit\u2019s internal memory is supported.<\/p>\n<p>A value of 0 specifies the start state. A value of 1 specifies the stop state.<\/p>\n<p>\u3010The initial state is stopped\u3011<\/p>\n<p>Set the initial state of of the data to stop.<\/p>\n<p>\u3010Use X-Axis Scroll Bar\u3011<\/p>\n<p>Set to enable the X-axis scroll bar functionality. Allows for easy viewing of the historic trend curve.<\/p>\n<p>\u3010Scroll Bar\u3011<\/p>\n<p>It appears when [Use X-axis scroll bar] is checked, and you can modify the [Width] item to make the slider zoom in or out.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Register Control\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Action\u3011<\/p>\n<p>After checking, you can set\u3010Trigger Bit\u3011and\u3010Control Word\u3011. The function is to use the register to execute the sub-switch to achieve automatic control.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-243.png\" \/><\/p>\n<p>\u3010X Axis Scale\u3011<\/p>\n<p>X axis scale numbers can be specified by register, it will appear register setting below after checked, and will display the number of consecutive occupancy registers, this register is in 16 Bit-UINT format, table as below.<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Word<\/p>\n<\/td>\n<td>\n<p>Description<\/p>\n<\/td>\n<td>\n<p>Data Type<\/p>\n<\/td>\n<td>\n<p>Min.<\/p>\n<\/td>\n<td>\n<p>Max.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>0<\/p>\n<\/td>\n<td>\n<p>Number of Major Division<\/p>\n<\/td>\n<td>\n<p>16Bit-UINT<\/p>\n<\/td>\n<td>\n<p>1<\/p>\n<\/td>\n<td>\n<p>30<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>1<\/p>\n<\/td>\n<td>\n<p>Number of Sub Division<\/p>\n<\/td>\n<td>\n<p>16Bit-UINT<\/p>\n<\/td>\n<td>\n<p>1<\/p>\n<\/td>\n<td>\n<p>30<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>\u3010Y Axis Scale\u3011<\/p>\n<p>Y axis scale numbers can be specified by register, it will appear register setting below after checked, and will display the number of consecutive occupancy registers, this register is in 16 Bit-UINT format, table as below.<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Word<\/p>\n<\/td>\n<td>\n<p>Description<\/p>\n<\/td>\n<td>\n<p>Data Type<\/p>\n<\/td>\n<td>\n<p>Min.<\/p>\n<\/td>\n<td>\n<p>Max.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>0<\/p>\n<\/td>\n<td>\n<p>Number of Major Division<\/p>\n<\/td>\n<td>\n<p>16Bit-UINT<\/p>\n<\/td>\n<td>\n<p>1<\/p>\n<\/td>\n<td>\n<p>30<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>1<\/p>\n<\/td>\n<td>\n<p>Number of Sub Division<\/p>\n<\/td>\n<td>\n<p>16Bit-UINT<\/p>\n<\/td>\n<td>\n<p>1<\/p>\n<\/td>\n<td>\n<p>30<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>\u3010X Axis Range\u3011<\/p>\n<p>X axis range can be specified by register, it will appear register setting below after checked, and will display the number of consecutive occupancy registers, table as below.<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Word<\/p>\n<\/td>\n<td>\n<p>Description<\/p>\n<\/td>\n<td>\n<p>Data Type<\/p>\n<\/td>\n<td>\n<p>Min.<\/p>\n<\/td>\n<td>\n<p>Max.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>0 &amp; 1<\/p>\n<\/td>\n<td>\n<p>Maximum of x axis.<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>Greater than the minimum value.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>\u3010Y Axis Range\u3011<\/p>\n<p>Y axis range can be specified by register, it will appear register setting below after checked, and will display the number of consecutive occupancy registers, table as below.<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Word<\/p>\n<\/td>\n<td>\n<p>Description<\/p>\n<\/td>\n<td>\n<p>Data Type<\/p>\n<\/td>\n<td>\n<p>Min.<\/p>\n<\/td>\n<td>\n<p>Max.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>0 &amp; 1<\/p>\n<\/td>\n<td>\n<p>The maximum of the Y-axis on the left side of the graph<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>2 &amp; 3<\/p>\n<\/td>\n<td>\n<p>The minimum of the Y-axis on the left side of the graph<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>4<\/p>\n<\/td>\n<td>\n<p>Curve left side of the Y-axis value of the decimal point position<\/p>\n<\/td>\n<td>\n<p>16Bit-UINT<\/p>\n<\/td>\n<td>\n<p>0<\/p>\n<\/td>\n<td>\n<p>5<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>5 &amp; 6<\/p>\n<\/td>\n<td>\n<p>The maximum of the Y-axis on the right side of the graph<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>7 &amp; 8<\/p>\n<\/td>\n<td>\n<p>The minimum of the Y-axis on the right side of the graph<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>9<\/p>\n<\/td>\n<td>\n<p>Curve right side of the Y-axis value of the decimal point position<\/p>\n<\/td>\n<td>\n<p>16Bit-UINT<\/p>\n<\/td>\n<td>\n<p>0<\/p>\n<\/td>\n<td>\n<p>5<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><strong>Note: maximum value should greater than minimum value.<\/strong><\/p>\n<p>\u3010Curves\u3011<\/p>\n<p>If curve Y-axis display range use\u3010individual\u3011, check this option, each of the Y-axis curve can be specified by register, and will display the number of consecutive occupancy registers, table as below.<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Word<\/p>\n<\/td>\n<td>\n<p>Description<\/p>\n<\/td>\n<td>\n<p>Data Type<\/p>\n<\/td>\n<td>\n<p>Min.<\/p>\n<\/td>\n<td>\n<p>Max.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>0 &amp; 1<\/p>\n<\/td>\n<td>\n<p>Maximum value of curve 0<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>2 &amp; 3<\/p>\n<\/td>\n<td>\n<p>Minimum value of curve 0<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>4 &amp; 5<\/p>\n<\/td>\n<td>\n<p>Maximum value of curve 1<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>6 &amp; 7<\/p>\n<\/td>\n<td>\n<p>Minimum value of curve 1<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>8 &amp; 9<\/p>\n<\/td>\n<td>\n<p>Maximum value of curve 2<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>10 &amp; 11<\/p>\n<\/td>\n<td>\n<p>Minimum value of curve 2<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u2026<\/p>\n<\/td>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td>\n<p>124 &amp; 125<\/p>\n<\/td>\n<td>\n<p>Maximum value of curve 31<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>126 &amp; 127<\/p>\n<\/td>\n<td>\n<p>Minimum value of curve 31<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><strong>Note: maximum value should greater than minimum value.<\/strong><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.24.7 \u3010Sub Switch\u3011<\/h5>\n<p>\u3010Historic Trend\u3011\u3010Sub Switch\u3011setting paging as shown below, the meaning of each setting is as follows :<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-244.jpg\" \/><\/p>\n<p>Figure 337\u3010Sub Switch\u3011Setting Screen of\u3010Historic Trend\u3011<\/p>\n<p>Table 204\u3010Sub Switch\u3011Setting Properties of\u3010Historic Trend\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Sub Switch List\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Sub Switch List\u3011that can be selected for\u3010Historic Trend\u3011. Sub switches can be enabled after selecting them. Settings for the appearance of the selected sub switches will also appear on the right. <\/p>\n<p>When different sub switches are selected from the list, the appearance settings to the right will be updated according to the sub switches selected.<\/p>\n<p>In which the Sub Switches are divided into:<\/p>\n<ul>\n<li>\u3010Start\u3011-Start updating the curve to display the data captured by the \u3010Data Logger\u3011on the curve.<\/li>\n<li>\u3010Stop\u3011-Stop updating the curve; which means stop updating the data captured by the\u3010Data Logger\u3011.<\/li>\n<li>\u3010Clear\u3011-Clear the curve, but the data recorded in the\u3010Data Logger\u3011 will be retained.<\/li>\n<li>\u3010Hor. Zoom In\u3011\u2014Horizontal zoom in.<\/li>\n<li>\u3010Hor. Zoom Out\u3011\u2014Horizontal zoom out.<\/li>\n<li>\u3010Ver. Zoom In\u3011\u2014Vertical zoom in.<\/li>\n<li>\u3010Ver. Zoom Out\u3011\u2014Vertical zoom out.<\/li>\n<li>\u3010Move Left\u3011\u2014Move Left.<\/li>\n<li>\u3010Move Right\u3011\u2014Move Right.<\/li>\n<li>\u3010Move Up\u3011\u2014Move Up.<\/li>\n<li>\u3010Move Down\u3011\u2014Move Down.<\/li>\n<li>\u3010Search\u3011\u2014Perform a search of a time curve. When pressed a dialog window appears, allowing a selection of\u3010Scope\u3011or a\u3010single point search\u3011.<\/li>\n<\/ul>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-245.jpg\" \/><\/p>\n<ul>\n<li>\u3010Load\u3011\u2014If the source of the\u3010Historic Trend\u3011is \u3010File\u3011, a dialog window will appear, displaying the file source.<\/li>\n<\/ul>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Display\u3011\u3010Text\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Direct Text Font\u3011<\/p>\n<p>Set the text font of the sub switch currently selected.<\/p>\n<p>\u3010Direct Text Size\u3011<\/p>\n<p>Set the text size of the sub switch currently selected.<\/p>\n<p>\u3010Position\u3011<\/p>\n<p>Set the text position of the sub switch currently selected.<\/p>\n<p>\u3010Format\u3011<\/p>\n<p>Set the text format of the sub switch currently selected, including Bold, Italics and Underline.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the text color of the sub switch currently selected.<\/p>\n<p>\u3010Content(Direct Text)\u3011<\/p>\n<p>Set the text of the sub switch currently selected.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Display\u3011\u3010Background\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the background of the sub switch currently selected. Check it to activate background settings, and the displayed background of the sub switch currently selected can be edited below. If this option is not checked, the background will be transparent.<\/p>\n<p>\u3010Use Image\u3011<\/p>\n<p>Set to use an image for the displayed background of the sub switch currently selected. When this option is checked, image selection settings will appear asking the user to select an image either from the\u3010Image Library\u3011or from a file.<\/p>\n<p>\u3010Background Color\u3011<\/p>\n<p>Set the background color of the sub switch currently selected. This setting will appear if\u3010Use Image\u3011was not selected. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Display\u3011\u3010while Pressing\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Individual Buzzer Setting\u3011<\/p>\n<p>Can individually setup buzzer setting.<\/p>\n<p>Includes 5 modes: Off, Short, Long, Short-Short, Long-Short.<\/p>\n<p>\u3010Play Audio\u3011<\/p>\n<p>Select to play audio when the sub switch is pressed. An\u3010Audio Selector\u3011will appear on the right when enabled. The switch on the right of the\u3010Audio Selector\u3011can be pressed to select an audio and the switch on the left of the\u3010Audio Selector\u3011can be pressed to play the audio selected. <\/p>\n<p>\u3010Pressing Effect\u3011<\/p>\n<p>Set the pressing effect of the sub switch currently selected. There are two effects available for selection:\u3010None\u3011and\u3010Highlight\u3011.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Advanced\u3011\u3010Operation Control\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Operation control of sub switch, it can enabled by bit or security.<\/p>\n<p>\u3010Enable by Bit\u3011<\/p>\n<p>Check whether the sub switch operation is controlled by a bit<\/p>\n<p>\u3010Show Disabled Sign\u3011<\/p>\n<p>Check if you want to display the forbidden symbol, it\u2019s valid when check\u3010Enable by Bit\u3011,\u3010Enabled by Word\u3011or\u3010Enable by Security\u3011.<\/p>\n<p>\u3010Address\u3011<\/p>\n<p>Set the address of the sub switch operation control bit.<\/p>\n<p>\u3010State\u3011<\/p>\n<p>Set the control bit as 1 or 0 to operate object. <\/p>\n<p>\u3010Enabled by Word\u3011<\/p>\n<p>Check whether the operation is controlled by word.<\/p>\n<p>\u3010Address\u3011<\/p>\n<p>Set the operation control word address.<\/p>\n<p>\u3010Condition\u3011<\/p>\n<p>Set the condition of word control and when it is true then the object can be controlled, when false not the object can not be controlled. The condition include\u2019 =\u2019,\u2019 !=\u2019, \u2018&gt;\u2019, \u2018&lt;\u2019, \u2018&gt;=\u2019, \u2018&lt;=\u2019.<\/p>\n<p>\u3010Enable by Security\u3011<\/p>\n<p>Select the sub switch whether controlled by user level.<\/p>\n<p>\u3010User Level Condition\u3011<\/p>\n<p>Set the level and condition of the object.<\/p>\n<p>\u3010Hold Time\u3011<\/p>\n<p>Check whether the operation is controlled by hold time. Hold time can be divided into two kinds:<\/p>\n<ul>\n<li>\u3010Press On\u3011: press directly, according to the\u3010Min. Hold Time\u3011to confirm whether the operation is executed.<\/li>\n<li>\u3010Double Press\u3011: quickly double press to confirm whether the operation is executed.<\/li>\n<\/ul>\n<p>\u3010Operator Confirm\u3011<\/p>\n<p>Check whether show comfirmation message window after checking the operation.<\/p>\n<p>\u3010Max. Waiting Time\u3011<\/p>\n<p>When the confirmation message window is displayed, If the user does not reply within this time, the system will close the confirmation message window and cancel this operation<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h4>19.4.25 \u3010Historic XY Scatter\u3011<\/h4>\n<p>\u3010Historic XY Scatter\u3011 is a curve object used to read the\u3010Recording Buffer\u3011data of the\u3010Data Log\u3011, in which the X\/Y values are both data captured by the\u3010Data Log\u3011. Its main functions are as follows:<\/p>\n<ul>\n<li>View the Recording Buffer data of the\u3010Data Log\u3011.<\/li>\n<li>Pause or start updating the data of the \u3010Data Log\u3011through the\u3010Sub Switch\u3011and clear the displayed data.<\/li>\n<\/ul>\n<h5>19.4.25.1 \u3010General\u3011<\/h5>\n<p>\u3010Historic XY Scatter\u3011\u3010General\u3011setting paging as shown below, the meaning of each setting is as follows :<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-246.png\" \/><\/p>\n<p>Figure 338\u3010General\u3011Setting Screen of\u3010Historic XY Scatter\u3011<\/p>\n<p>Table 205\u3010General\u3011Setting Properties of\u3010Historic XY Scatter\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Preview\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Preview the appearance of this object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Name\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The default name of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Comment\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the comment of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Basic\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Data Log ID\u3011<\/p>\n<p>Set the ID of the Data Log group to display.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Global Display Range\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the range that can be displayed.<\/p>\n<p>\u3010Max\u3011<\/p>\n<p>Set the maximum Global Range value for the X-axis\/Y-axis.<\/p>\n<p>\u3010Min\u3011<\/p>\n<p>Set the minimum Global Range value for the X-axis\/Y-axis.<\/p>\n<p><strong>Note: The\u3010Global Display Range\u3011represents the range that can be displayed. If\u3010Max\u3011is 100 and\u3010Min\u3011is 0, data exceeding this range will not be able to be displayed.<\/strong><\/p>\n<p>\u3010Display Precision\u3011<\/p>\n<p>Set the number of decimal places represented for X\/Y-axis values.<\/p>\n<p>\u3010Exponential Format\u3011<\/p>\n<p>When selected, the Y-axis values will be displayed in exponential form.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.25.2 \u3010Curve\u3011<\/h5>\n<p>\u3010Historic XY Scatter\u3011\u3010Curve\u3011setting paging as shown below, the meaning of each setting is as follows :<\/p>\n<p> <img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-247.png\" \/><\/p>\n<p>Figure 339\u3010Curve\u3011Setting Screen of\u3010Historic XY Scatter\u3011<\/p>\n<p>Table 206\u3010Curve\u3011 Setting Properties of\u3010Historic XY Scatter\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Curve\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010No. of Curve\u3011<\/p>\n<p>Select the number of curves up to a maximum of 32.<\/p>\n<p>\u3010Visibility Mask\u3011<\/p>\n<p>Select whether to use visibility mask to control the visibility of the each curve. While selecting, use should assign the 32bit UINT register as the mask, in which the 0 bit control the display of the curve 0, and so on.<\/p>\n<p>\u3010Display Range\u3011<\/p>\n<p>Used to set the display mode for the display range of the curve. It is usually one of the two following types:<\/p>\n<ul>\n<li>\u3010Global\u3011<\/li>\n<\/ul>\n<p>The display ranges of all the curves are identical to the\u3010Global Display Range\u3011.<\/p>\n<ul>\n<li>\u3010Individual\u3011<\/li>\n<\/ul>\n<p>The display range of all the curves can be different from the\u3010Global Display Range\u3011.<\/p>\n<p><strong>Explanation: When to set\u3010Display Range\u3011as\u3010Individual\u3011- Whenthe value ranges of the number of curves are different, for example when the value range of curve a is 0~10, and curve b is 0~1000, it can be discovered that the degree of changes for curve a will be difficult to observe if the two curves are placed in the same figure. This is when\u3010Display Range\u3011can be set as\u3010Individual\u3011and the display range of each curve can be defined. The system will automatically zoom the value of the curves according to the value in\u3010Global Display Range\u3011. Take this case for example, if the value in\u3010Global Display Range\u3011is 0~100, when the value of curve a is 5, the system will zoom it to 50 and when the value of curve b is 500, the system will also zoom it into 50, and so on.<\/strong><\/p>\n<p>\u3010X\/Y Source\u3011<\/p>\n<p>Set the source for the X\/Y valuesX\/ of the curve; the selection of the source depends on the setting of the\u3010Data Logger\u3011.<\/p>\n<p>\u3010Display Name\u3011<\/p>\n<p>Set the name of the curve.<\/p>\n<p>\u3010X\/Y Max\u3011<\/p>\n<p>Set the maximum Individual Display Range value for the X\/Y value of the curve, this option will appear if\u3010Display Range\u3011is\u3010Individual\u3011.<\/p>\n<p>\u3010X\/Y Min\u3011<\/p>\n<p>Set the minimum Individual Display Range value for the Y value of the curve, this option will appear if\u3010Display Range\u3011is\u3010Individual\u3011.<\/p>\n<p>\u3010Line\u3011<\/p>\n<p>Set to show the curve.<\/p>\n<p>\u3010Line Color\u3011<\/p>\n<p>Set the line color of the curve.<\/p>\n<p>\u3010Line Type\u3011<\/p>\n<p>Set the line type of curve.<\/p>\n<p>\u3010Line Width\u3011<\/p>\n<p>Set the curve width.<\/p>\n<p>\u3010Symbol\u3011<\/p>\n<p>Select to display the curve symbols. <\/p>\n<p>\u3010Symbol Color\u3011<\/p>\n<p>Set the color of the symbols. <\/p>\n<p>\u3010Symbol Type\u3011<\/p>\n<p>Set the symbol type.<\/p>\n<p>\u3010Fill\u3011<\/p>\n<p>Check whether to fill up the curve.<\/p>\n<p>\u3010Fill Type\u3011<\/p>\n<p>Set the fill type.<\/p>\n<p>\u3010Fill Color\u3011<\/p>\n<p>Set the fill color.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.25.3 \u3010Display\u3011<\/h5>\n<p>\u3010Historic XY Scatter\u3011\u3010Display\u3011setting paging as shown below, the meaning of each setting is as follows :<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-248.png\" \/><\/p>\n<p>Figure 340\u3010Display\u3011Setting Screen of\u3010Historic XY Scatter\u3011<\/p>\n<p>Table 207\u3010Display\u3011Setting Properties of\u3010Historic XY Scatter\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Border\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Select to display the border.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the color of the border.<\/p>\n<p>\u3010Type\u3011<\/p>\n<p>Set the border type.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Background\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Select to display the background.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the color of the background.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Graph Background\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Select to display the graph background.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the color of the graph background.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Cursor\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Select to display the cursor.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the color of the cursor.<\/p>\n<p>\u3010Show Cursor Value\u3011<\/p>\n<p>Select to display the cursor value.<\/p>\n<p>\u3010Show Cursor Value\u3011\u3010Display\u3011<\/p>\n<p>Set the visibility of cursor values. If\u3010Always\u3011is set, the cursor values are always shown. If\u3010Controlled by Bit\u3011is selected, the visibility of cursor values depends on the specified bit.<\/p>\n<p>\u3010Show Curve Name\u3011<\/p>\n<p>Select to display the curve name.<\/p>\n<p>\u3010Show Curve Name\u3011\u3010Display\u3011<\/p>\n<p>Set the visibility of the curve name. If\u3010Always\u3011is set, the curve name is always shown. If\u3010Controlled by Bit\u3011 is selected, the visibility of curve name depends on the specified bit.<\/p>\n<p>\u3010Font\u3011<\/p>\n<p>Set the font type and size of cursor values.<\/p>\n<p>\u3010Background\u3011<\/p>\n<p>Set the background color of the cursor values.<\/p>\n<p>\u3010Text\u3011<\/p>\n<p>Set the text color of the cursor values.<\/p>\n<p>\u3010Opacity\u3011<\/p>\n<p>Set the background opacity of the cursor values.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.25.4 \u3010Axis\u3011<\/h5>\n<p>\u3010Historic XY Scatter\u3011\u3010Axis\u3011setting paging as shown below, the meaning of each setting is as follows :<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-249.png\" \/><\/p>\n<p>Figure 341\u3010Axis\u3011Setting Screen of\u3010Historic XY Scatter\u3011<\/p>\n<p>Table 208\u3010Axis\u3011Setting Properties of\u3010Historic XY Scatter\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Common\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Axis Color\u3011<\/p>\n<p>Set the color of the axis.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010X-axis\u3011 \u3010Division\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Number of Major Division\u3011<\/p>\n<p>Set the number of major divisions of the X-axis.<\/p>\n<p>\u3010Number of Sub Division\u3011<\/p>\n<p>Set the number of sub divisions of the X-axis.<\/p>\n<p>\u3010Show Tick\u3011<\/p>\n<p>Select to display the ticks on the X-axis.<\/p>\n<p>\u3010Show Value\u3011<\/p>\n<p>Select to display the values on the X-axis.<\/p>\n<p>\u3010Value\/Tick Color\u3011<\/p>\n<p>Set the color of the values and ticks.<\/p>\n<p>\u3010Show Grid\u3011<\/p>\n<p>Select to display vertical gridlines and set the color of the gridlines.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Y-axis\u3011 \u3010Division\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Number of Major Division\u3011<\/p>\n<p>Set the number of major divisions of the Y-axis.<\/p>\n<p>\u3010Number of Sub Division\u3011<\/p>\n<p>Set the number of sub divisions of the Y-axis.<\/p>\n<p>\u3010Show Tick\u3011<\/p>\n<p>Select to display the ticks on the Y-axis.<\/p>\n<p>\u3010Show Value\u3011<\/p>\n<p>Select to display the values on the Y-axis.<\/p>\n<p>\u3010Value\/Tick Color\u3011<\/p>\n<p>Set the color of the values and ticks.<\/p>\n<p>\u3010Show Grid\u3011<\/p>\n<p>Select to display horizontal gridlines, and set the color of the gridlines.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.25.5 \u3010Advanced\u3011<\/h5>\n<p>\u3010Historic XY Scatter\u3011\u3010Advanced\u3011setting paging as shown below, the meaning of each setting is as follows :<\/p>\n<p> <img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-250.png\" \/><\/p>\n<p>Figure 342\u3010Advanced\u3011Setting Screen of\u3010Historic XY Scatter\u3011<\/p>\n<p>Table 209\u3010Advanced\u3011Setting Properties of\u3010Historic XY Scatter\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Advanced\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Start\/Stop State Address\u3011<\/p>\n<p>Set such that the\u3010Data Block Graph\u3011will start\/stop at the specified address. Only the display unit\u2019s internal memory is supported.<\/p>\n<p>A value of 0 specifies the start state. A value of 1 specifies the stop state.<\/p>\n<p>\u3010The initial state is stopped\u3011<\/p>\n<p>Set the initial state of of the data to stop.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Register Control\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010X Axis Scale\u3011<\/p>\n<p>X axis scale numbers can be specified by register, it will appear register setting below after checked, and will display the number of consecutive occupancy registers, this register is in 16 Bit-UINT format, table as below.<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Word<\/p>\n<\/td>\n<td>\n<p>Description<\/p>\n<\/td>\n<td>\n<p>Data Type<\/p>\n<\/td>\n<td>\n<p>Min.<\/p>\n<\/td>\n<td>\n<p>Max.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>0<\/p>\n<\/td>\n<td>\n<p>Number of Major Division<\/p>\n<\/td>\n<td>\n<p>16Bit-UINT<\/p>\n<\/td>\n<td>\n<p>1<\/p>\n<\/td>\n<td>\n<p>30<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>1<\/p>\n<\/td>\n<td>\n<p>Number of Sub Division<\/p>\n<\/td>\n<td>\n<p>16Bit-UINT<\/p>\n<\/td>\n<td>\n<p>1<\/p>\n<\/td>\n<td>\n<p>30<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>\u3010Y Axis Scale\u3011<\/p>\n<p>Y axis scale numbers can be specified by register, it will appear register setting below after checked, and will display the number of consecutive occupancy registers, this register is in 16 Bit-UINT format, table as below.<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Word<\/p>\n<\/td>\n<td>\n<p>Description<\/p>\n<\/td>\n<td>\n<p>Data Type<\/p>\n<\/td>\n<td>\n<p>Min.<\/p>\n<\/td>\n<td>\n<p>Max.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>0<\/p>\n<\/td>\n<td>\n<p>Number of Major Division<\/p>\n<\/td>\n<td>\n<p>16Bit-UINT<\/p>\n<\/td>\n<td>\n<p>1<\/p>\n<\/td>\n<td>\n<p>30<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>1<\/p>\n<\/td>\n<td>\n<p>Number of Sub Division<\/p>\n<\/td>\n<td>\n<p>16Bit-UINT<\/p>\n<\/td>\n<td>\n<p>1<\/p>\n<\/td>\n<td>\n<p>30<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>\u3010X Axis Range\u3011<\/p>\n<p>X axis range can be specified by register, it will appear register setting below after checked, and will display the number of consecutive occupancy registers, table as below.<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Word<\/p>\n<\/td>\n<td>\n<p>Description<\/p>\n<\/td>\n<td>\n<p>Data Type<\/p>\n<\/td>\n<td>\n<p>Min.<\/p>\n<\/td>\n<td>\n<p>Max.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>0 &amp; 1<\/p>\n<\/td>\n<td>\n<p>Maximum of x axis.<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>2 &amp; 3<\/p>\n<\/td>\n<td>\n<p>Minimum of x axis.<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>4<\/p>\n<\/td>\n<td>\n<p>The decimal point position of the X axis value<\/p>\n<\/td>\n<td>\n<p>16Bit-UINT<\/p>\n<\/td>\n<td>\n<p>0<\/p>\n<\/td>\n<td>\n<p>5<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><strong>Note: maximum value should bigger than minimum value.<\/strong><\/p>\n<p>\u3010Y Axis Range\u3011<\/p>\n<p>Y axis range can be specified by register, it will appear register setting below after checked, and will display the number of consecutive occupancy registers, table as below.<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Word<\/p>\n<\/td>\n<td>\n<p>Description<\/p>\n<\/td>\n<td>\n<p>Data Type<\/p>\n<\/td>\n<td>\n<p>Min.<\/p>\n<\/td>\n<td>\n<p>Max.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>0 &amp; 1<\/p>\n<\/td>\n<td>\n<p>The maximum of the Y-axis on the left side of the graph<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>2 &amp; 3<\/p>\n<\/td>\n<td>\n<p>The minimum of the Y-axis on the left side of the graph<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>4<\/p>\n<\/td>\n<td>\n<p>Curve left side of the Y-axis value of the decimal point position<\/p>\n<\/td>\n<td>\n<p>16Bit-UINT<\/p>\n<\/td>\n<td>\n<p>0<\/p>\n<\/td>\n<td>\n<p>5<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>5 &amp; 6<\/p>\n<\/td>\n<td>\n<p>The maximum of the Y-axis on the right side of the graph<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>7 &amp; 8<\/p>\n<\/td>\n<td>\n<p>The minimum of the Y-axis on the right side of the graph<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>9<\/p>\n<\/td>\n<td>\n<p>Curve right side of the Y-axis value of the decimal point position<\/p>\n<\/td>\n<td>\n<p>16Bit-UINT<\/p>\n<\/td>\n<td>\n<p>0<\/p>\n<\/td>\n<td>\n<p>5<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><strong>Note: maximum value should bigger than minimum value.<\/strong><\/p>\n<p>\u3010Curves\u3011<\/p>\n<p>If curve Y-axis display range use\u3010individual\u3011, check this option, each of the Y-axis curve can be specified by register, and will display the number of consecutive occupancy registers, table as below.<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Word<\/p>\n<\/td>\n<td>\n<p>Description<\/p>\n<\/td>\n<td>\n<p>Data Type<\/p>\n<\/td>\n<td>\n<p>Min.<\/p>\n<\/td>\n<td>\n<p>Max.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>0 &amp; 1<\/p>\n<\/td>\n<td>\n<p>X-axis maximum value of curve 0.<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>2 &amp; 3<\/p>\n<\/td>\n<td>\n<p>X-axis minimum value of curve 0.<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>4 &amp; 5<\/p>\n<\/td>\n<td>\n<p>Y-axis maximum value of curve 0.<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>6 &amp; 7<\/p>\n<\/td>\n<td>\n<p>Y-axis minimum value of curve 0.<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>8 &amp; 9<\/p>\n<\/td>\n<td>\n<p>X-axis maximum of curve 1.<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>10 &amp; 11<\/p>\n<\/td>\n<td>\n<p>X-axis minimum of curve 1.<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>12 &amp; 13<\/p>\n<\/td>\n<td>\n<p>Y-axis maximum value of curve 1.<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>14 &amp; 15<\/p>\n<\/td>\n<td>\n<p>Y-axis minimum value of curve 1.<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u2026<\/p>\n<\/td>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td>\n<p>248 &amp; 249<\/p>\n<\/td>\n<td>\n<p>X-axis maximum of curve 31.<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>250 &amp; 251<\/p>\n<\/td>\n<td>\n<p>X-axis minimum of curve 31.<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>252 &amp; 253<\/p>\n<\/td>\n<td>\n<p>Y-axis maximum value of curve 31.<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>254 &amp; 255<\/p>\n<\/td>\n<td>\n<p>Y-axis minimum value of curve 31.<\/p>\n<\/td>\n<td>\n<p>32Bit-FLOAT <\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<td>\n<p>x<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><strong>Note: maximum value should bigger than minimum value.<\/strong><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.25.6 \u3010Sub Switch\u3011<\/h5>\n<p>\u3010Historic XY Scatter\u3011\u3010Sub Switch\u3011setting paging as shown below, the meaning of each setting is as follows :<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-251.jpg\" \/><\/p>\n<p>Figure 343\u3010Sub Switch\u3011Setting Screen of\u3010Historic XY Scatter\u3011<\/p>\n<p>Table 210\u3010Sub Switch\u3011Setting Properties of\u3010Historic XY Scatter\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Sub Switch List\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Sub Switch List\u3011that can be selected for\u3010Historic XY Scatter\u3011. Sub switches can be enabled after selecting them. Settings for the appearance of the selected sub switches will also appear on the right.<\/p>\n<p>When different sub switches are selected from the list, the appearance settings to the right will be updated according to the sub switches selected. <\/p>\n<p>In which the\u3010Sub Switches\u3011are divided into:<\/p>\n<ul>\n<li>\u3010Start\u3011\u2014Start updating curve and displays the data captured by \u3010Data Log\u3011on the curve.<\/li>\n<li>\u3010Stop\u3011\u2014Stop updating curve, which means stop updating the data captured by\u3010Data Log\u3011.<\/li>\n<li>\u3010Clear\u3011\u2014Clear the curve, but the data recorded in \u3010Data Log\u3011will be preserved.<\/li>\n<li>\u3010Hor. Zoom In\u3011\u2014Horizontal zoom in.<\/li>\n<li>\u3010Hor. Zoom Out\u3011\u2014Horizontal zoom out.<\/li>\n<li>\u3010Ver. Zoom In\u3011\u2014Vertical zoom in.<\/li>\n<li>\u3010Ver. Zoom Out\u3011\u2014Vertical zoom out.<\/li>\n<li>\u3010Move Left\u3011\u2014Move Left.<\/li>\n<li>\u3010Move Right\u3011\u2014Move Right.<\/li>\n<li>\u3010Move Up\u3011\u2014Move Up.<\/li>\n<li>\u3010Move Down\u3011\u2014Move Down.<\/li>\n<\/ul>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Display\u3011\u3010Text\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Direct Text Font\u3011<\/p>\n<p>Set the text font of the sub switch currently selected.<\/p>\n<p>\u3010Direct Text Size\u3011<\/p>\n<p>Set the text size of the sub switch currently selected.<\/p>\n<p>\u3010Position\u3011<\/p>\n<p>Set the text position of the sub switch currently selected.<\/p>\n<p>\u3010Format\u3011<\/p>\n<p>Set the text format of the sub switch currently selected, including Bold, Italics and Underline.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the text color of the sub switch currently selected.<\/p>\n<p>\u3010Content(Direct Text)\u3011<\/p>\n<p>Set the text of the sub switch currently selected.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Display\u3011\u3010Background\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the background of the sub switch currently selected. Check it to activate background settings, and the displayed background of the sub switch currently selected can be edited below. If this option is not checked, the background will be transparent.<\/p>\n<p>\u3010Use Image\u3011<\/p>\n<p>Set to use an image for the displayed background of the sub switch currently selected. When this option is checked, an image selection setting item will appear asking the user to select an image either from the\u3010Image Library\u3011or from a file.<\/p>\n<p>\u3010Background Color\u3011<\/p>\n<p>Set the displayed background color of the sub switch currently selected. This setting item will appear if\u3010Use Image\u3011was not selected. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Display\u3011\u3010while Pressing\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Individual Buzzer Setting\u3011<\/p>\n<p>Can individually setup buzzer setting.<\/p>\n<p>Includes 5 modes: Off, Short, Long, Short-Short, Long-Short.<\/p>\n<p>\u3010Play Audio\u3011<\/p>\n<p>Select to play audio when the sub switch is pressed. An\u3010Audio Selector\u3011will appear on the right when enabled. The switch on the right of the\u3010Audio Selector\u3011can be pressed to select an audio and the switch on the left of the\u3010Audio Selector\u3011can be pressed to play the audio selected. <\/p>\n<p>\u3010Pressing Effect\u3011<\/p>\n<p>Set the pressing effect of the sub switch currently selected. There are two effects available for selection:\u3010None\u3011and\u3010Highlight\u3011.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Advanced\u3011\u3010Operation Control\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Operation control of sub switch, it can enabled by bit or security.<\/p>\n<p>\u3010Enable by Bit\u3011<\/p>\n<p>Check whether the sub switch operation is controlled by a bit<\/p>\n<p>\u3010Show Disabled Sign\u3011<\/p>\n<p>Check if you want to display the forbidden symbol, it\u2019s valid when check\u3010Enable by Bit\u3011,\u3010Enabled by Word\u3011or\u3010Enable by Security\u3011.<\/p>\n<p>\u3010Address\u3011<\/p>\n<p>Set the address of the sub switch operation control bit.<\/p>\n<p>\u3010State\u3011<\/p>\n<p>Set the control bit as 1 or 0 to operate object. <\/p>\n<p>\u3010Enabled by Word\u3011<\/p>\n<p>Check whether the operation is controlled by word.<\/p>\n<p>\u3010Address\u3011<\/p>\n<p>Set the operation control word address.<\/p>\n<p>\u3010Condition\u3011<\/p>\n<p>Set the condition of word control and when it is true then the object can be controlled, when false not the object can not be controlled. The condition include\u2019 =\u2019,\u2019 !=\u2019, \u2018&gt;\u2019, \u2018&lt;\u2019, \u2018&gt;=\u2019, \u2018&lt;=\u2019.<\/p>\n<p>\u3010Enable by Security\u3011<\/p>\n<p>Select the sub switch whether controlled by user level.<\/p>\n<p>\u3010User Level Condition\u3011<\/p>\n<p>Set the level and condition of the object.<\/p>\n<p>\u3010Hold Time\u3011<\/p>\n<p>Check whether the operation is controlled by hold time. Hold time can be divided into two kinds:<\/p>\n<ul>\n<li>\u3010Press On\u3011: press directly, according to the\u3010Min. Hold Time\u3011to confirm whether the operation is executed.<\/li>\n<li>\u3010Double Press\u3011: quickly double press to confirm whether the operation is executed.<\/li>\n<\/ul>\n<p>\u3010Operator Confirm\u3011<\/p>\n<p>Check whether show comfirmation message window after checking the operation.<\/p>\n<p>\u3010Max. Waiting Time\u3011<\/p>\n<p>When the confirmation message window is displayed, If the user does not reply within this time, the system will close the confirmation message window and cancel this operation<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h4>19.4.26 \u3010Historic Data Table\u3011<\/h4>\n<p>\u3010Historic Data Table\u3011 is a table object used the read the Recording Buffer data of the\u3010Data Log\u3011. Its main functions are as follows:<\/p>\n<ul>\n<li>View the Recording Buffer data of the\u3010Data Log\u3011.<\/li>\n<li>Pause or start updating the data of the\u3010Data Log\u3011through the\u3010Sub Switch\u3011, and clear the displayed data.<\/li>\n<\/ul>\n<h5>19.4.26.1 \u3010General\u3011<\/h5>\n<p>\u3010Historic Data Table\u3011\u3010General\u3011setting paging as shown below, the meaning of each setting is as follows :<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-252.png\" \/><\/p>\n<p>Figure 344\u3010General\u3011Setting Screen of\u3010Historic Data Table\u3011<\/p>\n<p>Table 211\u3010General\u3011Setting Properties of\u3010Historic Data Table\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Preview\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Preview the appearance of this object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Name\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The default name of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Comment\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the comment of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Basic\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Data Log ID\u3011<\/p>\n<p>Set the ID of the Data Log group to display.<\/p>\n<p>\u3010Source\u3011<\/p>\n<p>Set the source from the\u3010Data Log\u3011<\/p>\n<p> or\u3010File\u3011.<\/p>\n<p>\u3010Data Log\u3011<\/p>\n<p>Use\u3010Data Log\u3011as the source of the data. Refer to <strong>Chapter 7 -Data Log<\/strong>.<\/p>\n<p>\u3010File\u3011<\/p>\n<p>Display the CSV or TXT file exported by\u3010Data Log\u3011, or display the CSV or TXT file with the same format content as\u3010Data Log ID\u3011. After clicking the file, the corresponding address setting will appear at the back. This address will mainly Corresponding file order, for example, this address is set to R25, and there are 3 files under datalog\\Group_1. At this time, R25 will correspond to the following values according to the order.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-253.png\" \/><\/p>\n<p>If one more file is added at this time, there are 4 files in total, and the corresponding values of R25 in this order will be as shown below.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-254.png\" \/><\/p>\n<p>So when R25 changes its content value, it also changes its displayed file.<\/p>\n<p>\u3010Continue Files\u3011<\/p>\n<p>Supports only for PC model, this mode will read the export files continuously from the folder so the users no need to import files all the time when viewing old files.<\/p>\n<p>\u3010Fresh data automatically\u3011<\/p>\n<p>Set under the\u3010File\u3011mode whether to automatically update the table display based on the stored data.<\/p>\n<p>\u3010Loaded File Name\u3011<\/p>\n<p>Show under the\u3010File\u3011mode,set an address which display the name of the file currently read by the data table.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Header\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Select to display the header.<\/p>\n<p>\u3010Font\u3011<\/p>\n<p>Set the font of the header.<\/p>\n<p>\u3010Size\u3011<\/p>\n<p>Set the size of the header.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the color of the header.<\/p>\n<p>\u3010Background\u3011<\/p>\n<p>Set the background color of the header.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Additional Info.\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Show Index\u3011<\/p>\n<p>Select to display the index, and set its display color.<\/p>\n<p>\u3010Show Date\u3011<\/p>\n<p>Select to display the date, and set its display color and format.<\/p>\n<p>\u3010Show Time\u3011<\/p>\n<p>Select to display the time, and set its display color and format.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Border\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Select to display the border.<\/p>\n<p>\u3010Type\u3011<\/p>\n<p>Set the border type.<\/p>\n<p>\u3010Color\/Width\u3011<\/p>\n<p>Set the color and width of the border.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Grid\/Background\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Grid\u3011<\/p>\n<p>Set the color of the grid.<\/p>\n<p>\u3010Horizontal\u3011<\/p>\n<p>Select to display horizontal gridlines.<\/p>\n<p>\u3010Vertical\u3011<\/p>\n<p>Select to display vertical gridlines.<\/p>\n<p>\u3010Background\u3011<\/p>\n<p>Set the color of the background.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Data\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Show Oldest Data First\u3011<\/p>\n<p>Set whether to display the oldest data in the top of the form, if unchecked then the oldest data will in the bottom of the form.<\/p>\n<p>\u3010Font\u3011<\/p>\n<p>Set the font of the data.<\/p>\n<p>\u3010Size\u3011<\/p>\n<p>Set the size of the data.<\/p>\n<p>\u3010Customize Height\u3011<\/p>\n<p>Users can customize the field height.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Scroll Bar\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Width\u3011<\/p>\n<p>Adjust the right side scroll bar width, provides 5 widths.<\/p>\n<p>\u3010Display\u3011<\/p>\n<p>You can check whether to display the scroll bar.<\/p>\n<p>\u3010Scroll Step\u3011<\/p>\n<p>Set how many lines to switch at a time, use with sub switch.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.26.2 \u3010Data Items\u3011<\/h5>\n<p>\u3010Historic Data Table\u3011\u3010Data Items\u3011setting paging as shown below, the meaning of each setting is as follows :<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-255.png\" \/><\/p>\n<p>Figure 345\u3010Data Items\u3011Setting Screen of\u3010Historic Data Table\u3011<\/p>\n<p>Table 212\u3010Data Items\u3011Setting Properties of\u3010Historic Data Table\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Set Recommended Width to All Columns\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>When this button is pressed, the software calculates the required column width at the time of planning and sets its field width<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Header\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Index\u3011<\/p>\n<p>Edit the\u3010Index\u3011entry of the header text. The text can be entered directly or selected from the text library,  the width of the entry can be adjusted by incrementing or decrementing the pixel count.<\/p>\n<p>\u3010Date\u3011<\/p>\n<p>Edit the\u3010Date\u3011entry of the header text. The text can be entered directly or selected from the text library, the width of the entry can be adjusted by incrementing or decrementing the pixel count.<\/p>\n<p>\u3010Time\u3011<\/p>\n<p>Edit the\u3010Time\u3011entry of the header text. The text can be entered directly or selected from the text library, the width of the entry can be adjusted by incrementing or decrementing the pixel count.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Data Items\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Copy the Selected Item Settings to Others\u3011<\/p>\n<p>This button will be enabled when an entire row is selected. Users can use this button to copy the settings of the selected item into other items. This simplifies the setting process for the user.<\/p>\n<p>\u3010Up\u3011<\/p>\n<p>This button will be enabled when an entire row is selected; users can use this button to change the order of the item.<\/p>\n<p>\u3010Down\u3011<\/p>\n<p>This button will be enabled when an entire row is selected; users can use this button to change the order of the item.<\/p>\n<p>The items within the table are determined by the\u3010Data Log\u3011, in which the item settings include:<\/p>\n<ul>\n<li>\u3010Display\u3011<\/li>\n<\/ul>\n<p>Set the visibility of this item.<\/p>\n<ul>\n<li>\u3010Customized\u3011<\/li>\n<\/ul>\n<p>The color of the item.<\/p>\n<ul>\n<li>\u3010Alignment\u3011<\/li>\n<\/ul>\n<p>The alignment of the item.<\/p>\n<ul>\n<li>\u3010Name\u3011<\/li>\n<\/ul>\n<p>This is used to view the names set by the\u3010Data Log\u3011and cannot be set. Please go to the settings page of the\u3010Data Log\u3011to change the name of the item.<\/p>\n<ul>\n<li>\u3010Width\u3011<\/li>\n<\/ul>\n<p>Column width setting.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.26.3 \u3010Sub Switch\u3011<\/h5>\n<p>\u3010Historic Data Table\u3011\u3010Sub Switch\u3011setting paging as shown below, the meaning of each setting is as follows :<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-256.png\" \/><\/p>\n<p>Figure 346\u3010Sub Switch\u3011Setting Screen of\u3010Historic Data Table\u3011<\/p>\n<p>Table 213\u3010Sub Switch\u3011Setting Properties of\u3010Historic Data Table\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Auto Scroll\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Auto scroll on\/off, this is invert switch.<\/p>\n<p>When new data is updated to the\u3010Historical Data Table\u3011, if auto-scroll is enabled, the table will automatically scroll to the latest data. Otherwise, the table will not scroll automatically.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Save\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Click to save all the data in the\u3010Data Log\u3011buffer,<\/p>\n<p>The storage format, destination, naming, etc. will depend on the settings of\u3010Data Log\u3011.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Load\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>When\u3010Source\u3011is\u3010File\u3011, pressing this button will display the following dialog window. To allow the operator to choose which files in the\u3010Historic Data Table\u3011to display. These files can be from within the HMI, Micro SD card, or USB.<br \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-257.png\" \/><br \/>If import file format is not the same, the following dialog window will appear.<br \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-258.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Search\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Allows the operator to search the data in\u3010Historic Data Table\u3011. Pressing this button will display following dialog windowand allows the operator to enter the date and time to search the data in the\u3010Historic Data Table\u3011.<br \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-259.png\" \/><br \/>After the search, the\u3010Historic Data Table\u3011will display the line and invert the colors of the result.<br \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-260.jpg\" \/><br \/>If searched data is not found in the\u3010Historic Data Table\u3011, the following dialog window will appear.<br \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-261.png\" \/><\/p>\n<p>Note: When using the search, please note that the year is expressed as yy or yyyy. These are two different formats. If you choose the wrong one, you will not be able to search.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Top\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Display the list to the top.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Bottom\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Display the list to the bottom.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Up\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Move the list up one column.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Down\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Move the list down one column.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Scroll Up\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Scroll up n columns, n can be set in the\u3010General\u3011.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Scroll Down\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Scroll down n columns, n can be set in the\u3010General\u3011.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Left\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Move the list one column to the left.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Right\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Move the list one column to the right.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010File Print\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>It can be used when the mode is\u3010File\u3011. Print out all the data in the file. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Filter\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>After enabling this option, you can select and display records from a specific time period. This feature is only available when the continuous file function is enabled.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Display\u3011\u3010Text\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Direct Text Font\u3011<\/p>\n<p>Set the font of the sub switch currently selected.<\/p>\n<p>\u3010Direct Text Size\u3011<\/p>\n<p>Set the text size of the sub switch currently selected.<\/p>\n<p>\u3010Position\u3011<\/p>\n<p>Set the text position of the sub switch currently selected.<\/p>\n<p>\u3010Format\u3011<\/p>\n<p>Set the text format of the sub switch currently selected, including Bold, Italics and Underline.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the text color of the sub switch currently selected.<\/p>\n<p>\u3010Content(Direct Text)\u3011<\/p>\n<p>Set the text of the sub switch currently selected.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Display\u3011\u3010Background\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the background of the sub switch currently selected. Check it to activate background settings, and the displayed background of the sub switch currently selected can be edited below. If this option is not checked, the background will be transparent.<\/p>\n<p>\u3010Use Image\u3011<\/p>\n<p>Set to use an image for the displayed background of the sub switch currently selected. When this option is checked, an image selection setting item will appear asking the user to select an image either from the\u3010Image Library\u3011or from a file.<\/p>\n<p>\u3010Background Color\u3011<\/p>\n<p>Set the background color of the sub switch currently selected. This setting will appear if\u3010Use Image\u3011was not selected. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Display\u3011\u3010while Pressing\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Individual Buzzer Setting\u3011<\/p>\n<p>Can individually setup buzzer setting.<\/p>\n<p>Includes 5 modes: Off, Short, Long, Short-Short, Long-Short.<\/p>\n<p>\u3010Play Audio\u3011<\/p>\n<p>Select to play audio when the sub switch is pressed. An\u3010Audio Selector\u3011will appear on the right when enabled. The switch on the right of the\u3010Audio Selector\u3011can be pressed to select an audio and the switch on the left of the\u3010Audio Selector\u3011can be pressed to play the audio selected. <\/p>\n<p>\u3010Pressing Effect\u3011<\/p>\n<p>Set the pressing effect of the sub switch currently selected. There are two effects available for selection:\u3010None\u3011and\u3010Highlight\u3011.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Advanced\u3011\u3010Operation Control\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Operation control of sub switch, it can enabled by bit or security.<\/p>\n<p>\u3010Enable by Bit\u3011<\/p>\n<p>Check whether the sub switch operation is controlled by a bit<\/p>\n<p>\u3010Show Disabled Sign\u3011<\/p>\n<p>Check if you want to display the forbidden symbol, it\u2019s valid when check\u3010Enable by Bit\u3011,\u3010Enabled by Word\u3011or\u3010Enable by Security\u3011.<\/p>\n<p>\u3010Address\u3011<\/p>\n<p>Set the address of the sub switch operation control bit.<\/p>\n<p>\u3010State\u3011<\/p>\n<p>Set the control bit as 1 or 0 to operate object. <\/p>\n<p>\u3010Enabled by Word\u3011<\/p>\n<p>Check whether the operation is controlled by word.<\/p>\n<p>\u3010Address\u3011<\/p>\n<p>Set the operation control word address.<\/p>\n<p>\u3010Condition\u3011<\/p>\n<p>Set the condition of word control and when it is true then the object can be controlled, when false not the object can not be controlled. The condition include\u2019 =\u2019,\u2019 !=\u2019, \u2018&gt;\u2019, \u2018&lt;\u2019, \u2018&gt;=\u2019, \u2018&lt;=\u2019.<\/p>\n<p>\u3010Enable by Security\u3011<\/p>\n<p>Select the sub switch whether controlled by user level.<\/p>\n<p>\u3010User Level Condition\u3011<\/p>\n<p>Set the level and condition of the object.<\/p>\n<p>\u3010Hold Time\u3011<\/p>\n<p>Check whether the operation is controlled by hold time. Hold time can be divided into two kinds:<\/p>\n<ul>\n<li>\u3010Press On\u3011: press directly, according to the\u3010Min. Hold Time\u3011to confirm whether the operation is executed.<\/li>\n<li>\u3010Double Press\u3011: quickly double press to confirm whether the operation is executed.<\/li>\n<\/ul>\n<p>\u3010Operator Confirm\u3011<\/p>\n<p>Check whether show comfirmation message window after checking the operation.<\/p>\n<p>\u3010Max. Waiting Time\u3011<\/p>\n<p>When the confirmation message window is displayed, If the user does not reply within this time, the system will close the confirmation message window and cancel this operation<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h4>19.4.27 \u3010Historic Data Selector\u3011<\/h4>\n<p>The\u3010Historic Data Selector\u3011allows a user to select and view a\u3010Data Log\u3011that was exported into a CSV or TXT file. When the\u3010Historic Data Selector\u3011is accessed, a dropdown menu gives the user the files to view. Clicking on one of the files allows the user to view it.<\/p>\n<h5>19.4.27.1 \u3010Setting\u3011<\/h5>\n<p>\u3010Historic Data Selector\u3011\u3010Setting\u3011setting paging as shown below, the meaning of each setting is as follows :<\/p>\n<p> <img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-262.png\" \/><\/p>\n<p>Figure 347\u3010General\u3011Setting Screen of\u3010Historic Data Selector\u3011<\/p>\n<p>Table 214\u3010General\u3011Setting Properties of\u3010Historic Data Selector\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Preview\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Preview the appearance of this object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Name\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The default name of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Comment\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the comment of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Basic\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Data Log ID\u3011<\/p>\n<p>Set the ID of the Data Log group to display.<\/p>\n<p>\u3010Address\u3011<\/p>\n<p>Set up a register to control the displayed files.<\/p>\n<p>This address mainly corresponds to the order of the files. For example, this address is set to R25, and there are 3 files under datalog\\Group_1. At this time, R25 will correspond to the values in the following order.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-263.jpg\" \/><\/p>\n<p>If one more file is added at this time, there are 4 files in total, and the corresponding values of R25 in this order will be as shown below.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-264.jpg\" \/><\/p>\n<p>\u3010Display Format\u3011<\/p>\n<p>Press the selector than will display the corresponding file name of the\u3010Data Log ID\u3011, and the display format can be selected from\u3010Show File Name\u3011or\u3010Show Last Modified Date Time\u3011.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-265.jpg\" \/><\/p>\n<p>\u3010Show Last Modified DateTime\u3011<\/p>\n<p>When the Data Selector is accessed, it will display the data collection date and time of the corresponding file.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-266.jpg\" \/><\/p>\n<p>\u3010Show Date\u3011<\/p>\n<p>Set whether to display the date of the file and set the display format, select\u3010Show Last Modified DateTime\u3011, this option will appear.<\/p>\n<p>\u3010Show Time\u3011<\/p>\n<p>Set whether to display the file time and set the display format, select\u3010Show Last Modified DateTime\u3011, this option will appear.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.27.2 \u3010Display\u3011<\/h5>\n<p>\u3010Historic Data Selector\u3011\u3010Display\u3011setting paging as shown below, the meaning of each setting is as follows :<\/p>\n<p> <img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-267.png\" \/><\/p>\n<p>Figure 348\u3010Display\u3011Setting Screen of\u3010Historic Data Selector\u3011<\/p>\n<p>Table 215\u3010Display\u3011Setting Properties of\u3010Historic Data Selector\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Background\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Selector Background\u3011<\/p>\n<p>Set the color of the background.<\/p>\n<p>\u3010List Background\u3011<\/p>\n<p>Set the color of the list background<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Border\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Type\u3011<\/p>\n<p>Set the border type.<\/p>\n<p>\u3010Color\/Width\u3011<\/p>\n<p>Set the color of the border.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Text\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Font\u3011<\/p>\n<p>Set the font and size of cursor values.<\/p>\n<p>\u3010Size\u3011<\/p>\n<p>Set the size of the text.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the color of the text.<\/p>\n<p>\u3010Type\u3011<\/p>\n<p>Set the format of the text.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h4>19.4.28 \u3010Alarm Display\u3011<\/h4>\n<p>\u3010Alarm Display\u3011is used to display the status of alarms that occurred during project execution. It can notify the operator of alarm related contents including alarm messages, levels occurrences, acknowledgement and recovery time etc.<\/p>\n<h5>19.4.28.1 \u3010Setting\u3011<\/h5>\n<p>The\u3010Alarm Display\u3011\u3010Setting\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p> <img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-268.png\" \/><\/p>\n<p>Figure 349\u3010Setting\u3011Screen of\u3010Alarm Display\u3011<\/p>\n<p>Table 216\u3010Setting\u3011Properties of\u3010Alarm Display\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Preview\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Preview the appearance of this object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Comment\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the comment of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Name\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The default name of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Setting\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Display Type\u3011<\/p>\n<p>Set the display type of the Alarm Display. <\/p>\n<p>When\u3010History\u3011is selected, the Alarm Display will give a complete display of alarm related messages. <\/p>\n<p>When\u3010Log\u3011is selected, the Alarm Display will display the various changes of alarm state entry by entry. <\/p>\n<p>When\u3010Active\u3011is selected, the Alarm Display will only display alarms that have not yet recovered. <\/p>\n<p>When\u3010Load CSV File\u3011is selected, the Alarm Display will display the contents of the specified CSV file.<\/p>\n<p>When\u3010Database\u3011is selected, the Alarm Display will read the data when connecting to the database. When selecting the database, all groups will be displayed forcibly, and the sub switch\u3010Filter\u3011cannot be used.<\/p>\n<p>\u3010New Alarm on Top\u3011<\/p>\n<p>Set to place new alarms on the top of the table. If not selected, new alarms will be added to the bottom of the table.<\/p>\n<p>\u3010Sort\u3011<\/p>\n<p>Set the sorting of the alarm display, you can choose to sort by the last time or serial number.<\/p>\n<p>\u3010Alarm Group\u3011<\/p>\n<p>Set the displayed Alarm Group of the Alarm Display. If the\u3010Direct\u3011option is selected, the Alarm Display will only display the alarm groups set below. If the\u3010Address\u3011 option is selected, the alarm group displayed by Alarm Display will be determined by the numeric value of the address set below.<\/p>\n<p>\u3010Single\u3011<\/p>\n<p>Set the alarm display only display a alarm group.<\/p>\n<p>\u3010Multiple\u3011<\/p>\n<p>Set the alarm display can display multiple groups, you can select the group to be displayed at\u3010Setting\u3011, need to set the alarm group in the alarm function, click to select, If you set 2 alarm groups,click on the settings will appear as shown below 2 alarm groups to choose from.<\/p>\n<p><img decoding=\"async\" alt=\"C:\\Users\\chien yu\\Desktop\\Fv manual\\90.JPG\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-269.jpg\" \/><\/p>\n<p>\u3010Alarm Source\u3011<\/p>\n<p>When\u3010Direct\u3011is selected, this display will be displayed according to the setting of\u3010Alarm Group\u3011.<\/p>\n<p>When selecting\u3010Address\u3011, the user can set an address, and the data type is 16 UINT.<\/p>\n<p>If the\u3010Alarm Group\u3011at this time selects\u3010Single\u3011, the displayed group can be switched through this address;<\/p>\n<p>If the\u3010Alarm Group\u3011at this time selects\u3010Multiple\u3011, enter 0 to display all groups, and enter a number to display a single group.<\/p>\n<p>\u3010Enable File Control\u3011<\/p>\n<p>If the\u3010Display Type\u3011is seleted as\u3010Load CSV File\u3011, this option will be available. If selected, the file control can be done using a register. The value in the register corresponds to the file order inside the specified path. New CSV files are added to the top of the path, i.e position 0.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-270.jpg\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-271.jpg\" \/><\/p>\n<p>\u3010Enable File Control\u3011(Load CSV File)<\/p>\n<p>Set the bit to control whether to enable the file.<\/p>\n<p>\u3010Refresh Data Automatically\u3011(Load CSV File)<\/p>\n<p>Set under the\u3010Load CSV file\u3011mode whether to automatically update the table display based on the stored data.<\/p>\n<p>\u3010Loaded File Name\u3011<\/p>\n<p>Show under the\u3010Load CSV file\u3011mode,set an address which display the name of the file currently read by the data table.<\/p>\n<p>\u3010Text View\u3011<\/p>\n<p>Set the display position, size and function of the alarm text view.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Item\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the display contents of the Alarm Display.<\/p>\n<p>\u3010Show Alarm Index\u3011<\/p>\n<p>Set to allow Alarm Display to display the index of the Alarm.<\/p>\n<p>\u3010Show Serial Number\u3011<\/p>\n<p>Set to allow Alarm Display to display the alarm\u2019s serial number. For all alarm groups, all automatically generated alarms have serial numbers that increment by 1 unless the serial number has been cleared.<\/p>\n<p>\u3010Show Trigger Date\u3011<\/p>\n<p>Set to allow Alarm Display to display the trigger date.<\/p>\n<p>\u3010Show Alarm Comment\u3011<\/p>\n<p>Set to allow Alarm Display to display the alarm comment.<\/p>\n<p>\u3010Show Trigger Time\u3011<\/p>\n<p>Set to allow Alarm Display to display the trigger time.<\/p>\n<p>\u3010Show Ack. Time\u3011<\/p>\n<p>Set to allow Alarm Display to display the alarm acknowledgement time.<\/p>\n<p>\u3010Show Recovery Time\u3011<\/p>\n<p>Set to allow Alarm Display to display the alarm recovery time.<\/p>\n<p>\u3010Show Last Time\u3011<\/p>\n<p>Set to allow Alarm Display to display the last alarm event, including trigger time, confirmation time, and recovery time.<\/p>\n<p>\u3010Show Message\u3011<\/p>\n<p>Set to allow Alarm Display to display the alarm message.<\/p>\n<p>\u3010Show Level\u3011<\/p>\n<p>Set to allow Alarm Display to display the alarm level. <\/p>\n<p>\u3010Show Record Address\u3011<\/p>\n<p>Set to allow Alarm Display to display the saved numeric value of the alarm record address.<\/p>\n<p>\u3010Show Occurrence\u3011<\/p>\n<p>Set to allow Alarm Display to display the alarm occurrences.<\/p>\n<p>\u3010Date Format\u3011<\/p>\n<p>This option will appear if\u3010Show Trigger Date\u3011is selected. It can be used to select the display format of the date for the Alarm Display.<\/p>\n<p>\u3010Time Format\u3011<\/p>\n<p>This option will appear if\u3010Show Trigger Time\u3011,\u3010Show Ack. Time\u3011or\u3010Show Recovery Time\u3011is selected. It can be used to select the display format of the time for the Alarm Display.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Color\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Change Alarm Color by\u3011<\/p>\n<p>Set the condition for the displayed color change of the Alarm Display. When\u3010Status\u3011is selected, the Alarm Display will determine the display color according to the status of the alarm. When\u3010Level\u3011is selected, the Alarm Display will determine the display color according to the level of the alarm. When\u3010Status + Level\u3011is selected, the Alarm Display will determine the displayed color according to the status and level of the alarm.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.28.2 \u3010Header\u3011<\/h5>\n<p>The\u3010Alarm Display\u3011\u3010Header\u3011page is as shown in the figure below, the displayed headers of the Alarm Display can be modified in this page.<\/p>\n<p> <img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-272.png\" \/><\/p>\n<p>Figure 350\u3010Display\u3011Setting Screen of\u3010Alarm Display\u3011<\/p>\n<p>Table 217\u3010Header\u3011Setting Properties of\u3010Alarm Display\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Set Recommended Width to All Columns\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>When this button is pressed, the software calculates the required column width at the time of planning and sets its field width<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Header\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Select the displayed text for the alarm display. The text can be entered directly or selected from the Text Library.<\/p>\n<p>\u3010Width\u3011<\/p>\n<p>Set the width of each column.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.28.3 \u3010Display\u3011<\/h5>\n<p>The\u3010Alarm Display\u3011\u3010Display\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p> <img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-273.png\" \/><\/p>\n<p>Figure 351\u3010Display\u3011Setting Screen of\u3010Alarm Display\u3011<\/p>\n<p>Table 218\u3010Display\u3011Setting Properties of\u3010Alarm Display\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Text\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Alignment\u3011<\/p>\n<p>Set the alignment of header or content.<\/p>\n<p>\u3010Direct Text Font\u3011<\/p>\n<p>Set the font of header or content.<\/p>\n<p>\u3010Direct Text Size\u3011<\/p>\n<p>Set the size of header or content.<\/p>\n<p>\u3010Font for Header\/Alarm String from Text Library\u3011<\/p>\n<p>The font and size of the string can be set here.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Appearance\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Row Height\u3011<\/p>\n<p>Set the row height of the Alarm Display.<\/p>\n<p>\u3010Background\u3011<\/p>\n<p>Set the background color of the Alarm Display.<\/p>\n<p><strong>\u3010<\/strong>Show Border\u3011<\/p>\n<p>Set to display the border. When it is checked, the color, width and type of the border can be set.<\/p>\n<p>\u3010Type\u3011<\/p>\n<p>Set the border type of the Alarm Display.<\/p>\n<p>\u3010Color\/Width\u3011<\/p>\n<p>Set the border color and thickness of the Alarm Display.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Header\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the header appearance of the Alarm Display. It includes\u3010Text\u3011to set the text color of the header and\u3010Background\u3011to set the background color of the header.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Grid\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set to display the\u3010Horizontal\u3011and\u3010Vertical\u3011gridlines of the Alarm Display; if display is selected, the color of the gridlines can be set.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Scroll Bar\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Width\u3011<\/p>\n<p>Adjust the right side scroll bar width, provides 5 widths.<\/p>\n<p>\u3010Display\u3011<\/p>\n<p>Check whether to display the slider.<\/p>\n<p>\u3010Scroll Step\u3011<\/p>\n<p>Set how many lines to switch at a time, use with sub-switch.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.28.4 \u3010Sub Switch\u3011<\/h5>\n<p>The\u3010Alarm Display\u3011\u3010Sub Switch\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p> <img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-274.png\" \/><\/p>\n<p>Figure 352\u3010Sub Switch\u3011Setting Screen of\u3010Alarm Display\u3011<\/p>\n<p>Table 219\u3010Sub Switch\u3011Setting Properties of\u3010Alarm Display\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Acknowledge\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Change the status of the currently selected alarm to acknowledge.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Clear\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Clear all alarms displayed on Alarm Display.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Auto Scroll\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set to enable the auto scroll function. If enabled, when a new alarm occurs, the Alarm Display will automatically scroll to the position of the newest alarm.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Show Window\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>When this switch is pressed, the system will display the\u3010Window Screen\u3011that corresponds to the currently selected alarm in the\u3010Alarm\u3011setting.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Filter\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Apply a filter to the alarm time display in order to find the alert message. Filter options include trigger time, confirmation time, recovery and last time.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-275.jpg\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Load\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>When the display time for the alarm display is set to\u3010CSV File\u3011, pressing the sub switch loads the specified CSV file. The operator can select where the CSV file should be imported from: HMI internal memory, Micro SD card, or USB.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-276.jpg\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Save\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Export the data on the display according to the export settings. If the filter is used, only the filtered data will be exported.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Show Text\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Please refer to\u3010Show Text View\u3011in chapter 0-<\/p>\n<p>\u3010Advanced Setting\u3011<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Top\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Move the alarm list to the top.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Bottom\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Move the alarm list to the bottom.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Up\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Move the list up one column.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Down\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Move the list down one column.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Scoll Up\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Scroll up n columns, n can be set in the\u3010Display\u3011-&gt;\u3010Scroll Step\u3011.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Scroll Down\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Scroll down n columns, n can be set in the\u3010Display\u3011-&gt;\u3010Scroll Step\u3011\u3010Scroll Step\u3011.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Left\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Move the list one column to the left.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Right\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Move the list one column to the right.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Acknowledge All\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>When multiple alarms are happening in the list, you can use this sub-switch to confirm all of them.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Display\u3011\u3010Text\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Direct Text Font\u3011<\/p>\n<p>Set the text font of the sub switch currently selected.<\/p>\n<p>\u3010Direct Text Size\u3011<\/p>\n<p>Set the text size of the sub switch currently selected.<\/p>\n<p>\u3010Position\u3011<\/p>\n<p>Set the text position of the sub switch currently selected.<\/p>\n<p>\u3010Format\u3011<\/p>\n<p>Set the text format of the sub switch currently selected, including Bold, Italics and Underline.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the text color of the sub switch currently selected.<\/p>\n<p>\u3010Content(Direct Text)\u3011<\/p>\n<p>Set the text of the sub switch currently selected.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Display\u3011\u3010Background\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the background of the sub switch currently selected. Check it to activate background settings, and the displayed background of the sub switch currently selected can be edited below. If this option is not checked, the background will be transparent.<\/p>\n<p>\u3010Use Image\u3011<\/p>\n<p>Set to use an image for the displayed background of the sub switch currently selected. When this option is checked, an image selection setting item will appear asking the user to select an image either from the\u3010Image Library\u3011or from a file.<\/p>\n<p>\u3010Background Color\u3011<\/p>\n<p>Set the background color of the sub switch currently selected. This setting will appear if \u3010Use Image\u3011was not selected. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Display\u3011\u3010while Pressing\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Individual Buzzer Setting\u3011<\/p>\n<p>Can individually setup buzzer setting.<\/p>\n<p>Includes 5 modes: Off, Short, Long, Short-Short, Long-Short.<\/p>\n<p>\u3010Play Audio\u3011<\/p>\n<p>Select to play audio when the sub switch is pressed. An\u3010Audio Selector\u3011will appear on the right when enabled. The switch on the right of the\u3010Audio Selector\u3011can be pressed to select an audio and the switch on the left of the\u3010Audio Selector\u3011can be pressed to play the audio selected. <\/p>\n<p>\u3010Pressing Effect\u3011<\/p>\n<p>Set the pressing effect of the sub switch currently selected. There are two effects available for selection:\u3010None\u3011and\u3010Highlight\u3011.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Advanced\u3011\u3010Operation Control\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Operation control of sub switch, it can enabled by bit or security.<\/p>\n<p>\u3010Enable by Bit\u3011<\/p>\n<p>Check whether the sub switch operation is controlled by a bit<\/p>\n<p>\u3010Show Disabled Sign\u3011<\/p>\n<p>Check if you want to display the forbidden symbol, it\u2019s valid when check\u3010Enable by Bit\u3011,\u3010Enabled by Word\u3011or\u3010Enable by Security\u3011.<\/p>\n<p>\u3010Address\u3011<\/p>\n<p>Set the address of the sub switch operation control bit.<\/p>\n<p>\u3010State\u3011<\/p>\n<p>Set the control bit as 1 or 0 to operate object. <\/p>\n<p>\u3010Enabled by Word\u3011<\/p>\n<p>Check whether the operation is controlled by word.<\/p>\n<p>\u3010Address\u3011<\/p>\n<p>Set the operation control word address.<\/p>\n<p>\u3010Condition\u3011<\/p>\n<p>Set the condition of word control and when it is true then the object can be controlled, when false not the object can not be controlled. The condition include\u2019 =\u2019,\u2019 !=\u2019, \u2018&gt;\u2019, \u2018&lt;\u2019, \u2018&gt;=\u2019, \u2018&lt;=\u2019.<\/p>\n<p>\u3010Enable by Security\u3011<\/p>\n<p>Select the sub switch whether controlled by user level.<\/p>\n<p>\u3010User Level Condition\u3011<\/p>\n<p>Set the level and condition of the object.<\/p>\n<p>\u3010Hold Time\u3011<\/p>\n<p>Check whether the operation is controlled by hold time. Hold time can be divided into two kinds:<\/p>\n<ul>\n<li>\u3010Press On\u3011: press directly, according to the\u3010Min. Hold Time\u3011to confirm whether the operation is executed.<\/li>\n<li>\u3010Double Press\u3011: quickly double press to confirm whether the operation is executed.<\/li>\n<\/ul>\n<p>\u3010Operator Confirm\u3011<\/p>\n<p>Check whether show comfirmation message window after checking the operation.<\/p>\n<p>\u3010Max. Waiting Time\u3011<\/p>\n<p>When the confirmation message window is displayed, If the user does not reply within this time, the system will close the confirmation message window and cancel this operation<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h4>19.4.29 \u3010Alarm Scrolling Text\u3011<\/h4>\n<p>Alarm Scrolling Text is used to display alarm states that occurred during project execution. The difference between Alarm Display and Alarm Scrolling Text is that Alarm Scrolling Text uses scrolling text to display the contents of the alarm currently occurring, including alarm messages, level, occurrences, acknowledgement and recovery time etc.<\/p>\n<h5>19.4.29.1 \u3010Setting\u3011<\/h5>\n<p>The\u3010Alarm Scrolling Text\u3011\u3010Setting\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p> <img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-277.png\" \/><\/p>\n<p>Figure 353\u3010Setting\u3011Screen of\u3010Alarm Scrolling Text\u3011<\/p>\n<p>Table 220\u3010Setting\u3011Properties of\u3010Alarm Scrolling Text\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Preview\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Previews the appearance of this object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Comment\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the comment of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Name\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The default name of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Setting\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Text Scrolling Speed\u3011<\/p>\n<p>Set the scrolling speed of Alarm Scrolling Text. There are four speeds that can be set from slow to fast:\u3010Speed 1\u3011to\u3010Speed 4\u3011.<\/p>\n<p>Also can set the text movement direction\u3010To Left\u3011or \u3010To Right\u3011.<\/p>\n<p>\u3010Alarm Group\u3011<\/p>\n<p>Set the Alarm Group of the Alarm Scrolling Text to display. If the\u3010Direct\u3011option is selected, the Alarm Scrolling Text will only display the alarm groups set below. If the\u3010Address\u3011option is selected, the alarm group displayed by Alarm Scrolling Text will be determined by the numeric value of the address set below.<\/p>\n<p>\u3010Single\u3011<\/p>\n<p>Set the alarm display only display a alarm group.<\/p>\n<p>\u3010Multiple\u3011<\/p>\n<p>Set the alarm display can display multiple groups, you can select the group to be displayed at\u3010Setting\u3011, need to set the alarm group in the alarm function, click to select, If you set 2 alarm groups,click on the settings will appear as shown below 2 alarm groups to choose from.<\/p>\n<p><img decoding=\"async\" alt=\"C:\\Users\\chien yu\\Desktop\\Fv manual\\90.JPG\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-278.jpg\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Item\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the display contents of Alarm Scrolling Text.<\/p>\n<p>\u3010Show Alarm Index\u3011<\/p>\n<p>Set to allow the Alarm Display to display the index of the Alarm.<\/p>\n<p>\u3010Show Serial Number\u3011<\/p>\n<p>Set to allow Alarm Display to display the alarm\u2019s serial number. For all alarm groups, all automatically generated alarms have serial numbers that increment by 1 unless the serial number has been cleared.<\/p>\n<p>\u3010Show Trigger Date\u3011<\/p>\n<p>Set to allow the Alarm Scrolling Text to display the trigger date.<\/p>\n<p>\u3010Show Alarm Comment\u3011<\/p>\n<p>Set to allow the Alarm Scrolling Text to display the alarm comment.<\/p>\n<p>\u3010Show Trigger Time\u3011<\/p>\n<p>Set to allow the Alarm Scrolling Text to display the trigger time.<\/p>\n<p>\u3010Show Message\u3011<\/p>\n<p>Set to allow the Alarm Scrolling Text to display the alarm message.<\/p>\n<p>\u3010Show Level\u3011<\/p>\n<p>Set to allow the Alarm Scrolling Text to display the alarm level.<\/p>\n<p>\u3010Show Record Address\u3011<\/p>\n<p>Set to allow the Alarm Scrolling Text to display the saved numeric value of the alarm record address.<\/p>\n<p>\u3010Show Occurrence\u3011<\/p>\n<p>Set to allow the Alarm Scrolling Text to display the alarm occurrences.<\/p>\n<p>\u3010Date Format\u3011<\/p>\n<p>This option will appear if\u3010Show Trigger Date\u3011is selected. It can be used to select the display format of the date for the Alarm Scrolling Text.<\/p>\n<p>\u3010Time Format\u3011<\/p>\n<p>This option will appear if\u3010Show Trigger Time\u3011is selected. It can be used to select the display format of the time for the Alarm Scrolling Text.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Color\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Change Alarm Color by\u3011<\/p>\n<p>Set the condition for the displayed color change of the Alarm Scrolling Text. The Alarm Scrolling Text will determine the display color according to the level of the alarm.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.29.2 \u3010Display\u3011<\/h5>\n<p>The\u3010Alarm Scrolling Text\u3011\u3010Display\u3011page is as shown in the figure below, the meanings of each setting item are listed below:<\/p>\n<p> <img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-279.png\" \/><\/p>\n<p>Figure 354\u3010Display\u3011Setting Screen of\u3010Alarm Scrolling Text\u3011<\/p>\n<p>Table 221\u3010Display\u3011Setting Properties of\u3010Alarm Scrolling Text\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Text\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Font for Alarm String from Direct Text\u3011<\/p>\n<p>The font of the alarm string can be set here.<\/p>\n<p>\u3010Size for Alarm String from Direct Text\u3011<\/p>\n<p>The size of the alarm string can be set here.<\/p>\n<p>\u3010Font for Alarm String from Text Library\u3011<\/p>\n<p>The font and size of the alarm string can be set here.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Appearance\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Background\u3011<\/p>\n<p>Set the background color of the Alarm Scrolling Text.<\/p>\n<p><strong>\u3010<\/strong>Show Border\u3011<\/p>\n<p>Set to display the border. When it is checked, the color, width and type of the border can be set at the bottom.<\/p>\n<p>\u3010Type\u3011<\/p>\n<p>Set the border type of the Alarm Scrolling Text.<\/p>\n<p>\u3010Color\/Width\u3011<\/p>\n<p>Set the border color and border thickness of the Alarm Scrolling Text.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h4>19.4.30 \u3010Alarm Data Selector\u3011<\/h4>\n<p>The\u3010Alarm Data Selector\u3011allows a user to select and view an\u3010Alarm\u3011that was exported into a CSV file. When the\u3010Alarm Data Selector\u3011is accessed, a dropdown menu gives the user the files to view. Clicking on one of the files allows the user to view it.<\/p>\n<h5>19.4.30.1 \u3010Setting\u3011<\/h5>\n<p>\u3010Alarm Data Selector\u3011\u3010Setting\u3011setting paging as shown below, the meaning of each setting is as follows :<\/p>\n<p> <img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-280.png\" \/><\/p>\n<p>Figure 355\u3010General\u3011Setting Screen of\u3010Alarm Data Selector\u3011<\/p>\n<p>Table 222\u3010General\u3011Setting Properties of\u3010Alarm Data Table\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Preview\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Preview the appearance of this object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Comment\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the comment of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Name\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The default name of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Basic\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Alarm Group\u3011<\/p>\n<p>Set the ID of the alarm group to display<\/p>\n<p>\u3010Address\u3011<\/p>\n<p>Select the register to control the visibility of a file. This address corresponds to the file path of alarms. The value stored in the register corresponds to the file number in the path, with the topmost file at position 0.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-281.jpg\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-282.jpg\" \/><\/p>\n<p>\u3010Display Format\u3011<\/p>\n<p>Select how the alarm data files are displayed when the Alarm Data Selector is accessed. There are two options for\u3010Display Format\u3011:\u3010Show File Name\u3011and\u3010Show Last Modified DateTime\u3011.<\/p>\n<p>\u3010Show File Name\u3011<\/p>\n<p>When the Alarm Data Selector is accessed, it will display the file names.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-283.jpg\" \/><\/p>\n<p>\u3010Show Last Modified DateTime\u3011<\/p>\n<p>When the Alarm Data Selector is accessed, it will display the data collection date and time of the corresponding file.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-284.jpg\" \/><\/p>\n<p>\u3010Show Date\u3011<\/p>\n<p>Select to show the dates of the files when the Alarm Data Selector is accessed. The format of the date can be set.<\/p>\n<p>\u3010Show Time\u3011<\/p>\n<p>Select to show the times of the files when Alarm Data Selector is accessed. The fomat of the time can be set.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.30.2 \u3010Display\u3011<\/h5>\n<p>\u3010Alarm Data Selector\u3011\u3010Display\u3011setting paging as shown below, the meaning of each setting is as follows :<\/p>\n<p> <img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-285.png\" \/><\/p>\n<p>Figure 356\u3010Display\u3011Setting Screen of\u3010Alarm Data Selector\u3011<\/p>\n<p>Table 223\u3010Display\u3011Setting Properties of\u3010Alarm Data Table\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Background\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Selector Background\u3011<\/p>\n<p>Set the color of the background.<\/p>\n<p>\u3010List Background\u3011<\/p>\n<p>Set the color of the list background<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Border\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Type\u3011<\/p>\n<p>Set the border type.<\/p>\n<p>\u3010Color\/Width\u3011<\/p>\n<p>Set the color of the border.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Text\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Font\u3011<\/p>\n<p>Set the font and size of cursor values.<\/p>\n<p>\u3010Size\u3011<\/p>\n<p>Set the size of the text.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the color of the text.<\/p>\n<p>\u3010Type\u3011<\/p>\n<p>Set the format of the text.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h4>19.4.31 \u3010Recipe Selector\u3011<\/h4>\n<p>\u3010Recipe Selector\u3011allows user to select a specific recipe in a recipe group during execution. Please refer to <strong>Chapter 9\u2013Recipe <\/strong>for functions related to recipes.<\/p>\n<h5>19.4.31.1 \u3010General\u3011<\/h5>\n<p>\u3010Recipe Selector\u3011\u3010General\u3011setting paging as shown below, the meaning of each setting is as follows :<\/p>\n<p> <img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-286.png\" \/><\/p>\n<p>Figure 357\u3010General\u3011Setting Page of\u3010Recipe Selector\u3011<\/p>\n<p>Table 224\u3010General\u3011Setting Properties of\u3010Recipe Selector\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Comment\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the comment of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Name\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The default name of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Preview\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Preview the appearance of this object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Recipe Group\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>If the user adds a new recipe group in the recipe setting function, the ID and name of the recipe group will be displayed here. The user must select a recipe group before the\u3010OK\u3011button is pressed.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Background\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Selector Background\u3011<\/p>\n<p>Set the background color of the selector.<\/p>\n<p>\u3010List Background\u3011<\/p>\n<p>Set the background color of the drop-down list.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Border\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Type\u3011<\/p>\n<p>Set the border type.<\/p>\n<p>\u3010Color\/Width\u3011<\/p>\n<p>Set the border color and width.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Text\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Font\u3011<\/p>\n<p>Set the text font.<\/p>\n<p>\u3010Size\u3011<\/p>\n<p>Set the text font size.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the text color.<\/p>\n<p>\u3010Type\u3011<\/p>\n<p>Set the format of the text.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.31.2 \u3010Advanced\u3011<\/h5>\n<p>\u3010Recipe Selector\u3011\u3010Advanced\u3011setting paging as shown below, the meaning of each setting is as follows :<\/p>\n<p> <img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-287.png\" \/><\/p>\n<p>Figure 358\u3010Advanced\u3011Setting Page of\u3010Recipe Selector\u3011<\/p>\n<p>Table 225\u3010General\u3011Setting Properties of\u3010Recipe Selector\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Source\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the source of recipe selector.<\/p>\n<p>\u3010Recipe Name\u3011<\/p>\n<p>Default value, use the recipe name as the data of recipe selector.<\/p>\n<p>\u3010Recipe Parameter(ASCII Type)\u3011<\/p>\n<p>When there is an ASCII String type in the recipe parameter<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Sort\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set whether the recipe selector data is sorted by text.<\/p>\n<p>\u3010No Sort\u3011<\/p>\n<p>Default value, The recipe selector data is not sorted and displayed in the original order. <\/p>\n<p>\u3010Ascending\u3011<\/p>\n<p>The recipe selector data is sorted in positive order.<\/p>\n<p>\u3010Descending\u3011<\/p>\n<p>The recipe selector data is sorted in reverse order.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Use Filter\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Is to use the filter in dynamic mode, by specifying the value or text of\u3010Filter String Address\u3011, filter the options required in the recipe selector, for example, \u3010Filter String Address\u3011=50, and R50=A, then the recipe selector only displays the recipe group name with the &quot;A&quot; text. <\/p>\n<p>\u3010Use Filter\u3011<\/p>\n<p>Set whether to enable filtering.<\/p>\n<p>\u3010Filter String Address\u3011<\/p>\n<p>Set the text address used for dynamic filtering, and the length of the text.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h4>19.4.32 \u3010Recipe Table\u3011<\/h4>\n<p>\u3010Recipe Table\u3011is used to read recipe group data set in the\u3010Recipe\u3011function. Users can also dynamically change the data in the recipe table during execution. Please refer to <strong>Chapter 9\u2013Recipe <\/strong>for functions related to recipes. Recipe Table has the following functions:<\/p>\n<ul>\n<li>To view the complete data of recipe group select\u3010Show All\u3011or select \u3010Only Show Current Recipe\u3011to show current recipe.<\/li>\n<li>Use the\u3010Sub Switch\u3011to load or save the recipe group file.<\/li>\n<\/ul>\n<h5>19.4.32.1 \u3010General\u3011<\/h5>\n<p>\u3010Recipe Table\u3011\u3010General\u3011setting paging as shown below, the meaning of each setting is as follows :<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-288.png\" \/><\/p>\n<p>Figure 359\u3010General\u3011Setting Page of\u3010Recipe Table\u3011<\/p>\n<p>Table 226\u3010General\u3011Setting Properties of\u3010Recipe Table\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Comment\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the comment of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Preview\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Preview the appearance of this object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Name\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The default name of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Basic\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Recipe Group\u3011<\/p>\n<p>If the user adds a new recipe group in the recipe setting function, the ID and name of the recipe group will be displayed here. The user must select a recipe group before the\u3010OK\u3011button is pressed.<\/p>\n<p>\u3010Table Type\u3011<\/p>\n<p>If\u3010Only Show Current Recipe\u3011is selected, the current recipe will be displayed according to the\u3010Control Address of Recipe No.\u3011in the recipe setting. If\u3010Show All\u3011is selected, all contents of the recipe group will be displayed.<\/p>\n<p>\u3010Transpose\u3011<\/p>\n<p>Reverse the rows and columns. For example, row 1 in the original table becomes column 1 in the transposed table.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-289.jpg\" \/><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-290.jpg\" \/><\/p>\n<p>\u3010Tap to Change Current Recipe\u3011<\/p>\n<p>Users can change the current recipe group by clicking on during the execution period,\u3010Control Address of Recipe No.\u3011will also change.<\/p>\n<p>\u3010Allow Input\u3011<\/p>\n<p>The user will be able to dynamically change the parameters and the recipe names in the recipe table during execution if this option is selected.<\/p>\n<p>\u3010Input Method for Recipe name\u3011<\/p>\n<p>Select the input method for recipe name, inculde\u3010None\u3011and\u3010Pinyin(Simplified Chinese)\u3011two ways.<\/p>\n<p>\u3010None\u3011<\/p>\n<p>If\u3010Input Method for Recipe name\u3011select as\u3010None\u3011will show up the figure as below, provide user to modify or input recipe name through the following keypad.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-291.jpg\" \/><\/p>\n<p>\u3010Pinyin(Simplified Chinese)\u3011<\/p>\n<p>If\u3010Input Method for Recipe name\u3011select as\u3010Pinyin(Simplified Chinese)\u3011will show up the figure as below, provide user to modify or input recipe name through the following keypad, switch to English or Pinyin.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-292.jpg\" \/><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-293.jpg\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Header\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Font Color\u3011<\/p>\n<p>Set the header font color.<\/p>\n<p>\u3010Background\u3011<\/p>\n<p>Set the header background color.<\/p>\n<p>\u3010Font for String from Direct Text\u3011<\/p>\n<p>Set the header font.<\/p>\n<p>\u3010Size\u3011<\/p>\n<p>Set the header font size.<\/p>\n<p>\u3010Font for String from the Text Library\u3011<\/p>\n<p>when the text is from library, can set the font and size.<\/p>\n<p>\u3010Customized Height\u3011<\/p>\n<p>User can customized the height of the header field.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Border\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Type\u3011<\/p>\n<p>Set the border type.<\/p>\n<p>\u3010Color\/Width\u3011<\/p>\n<p>Set the border color and width.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Grid\/Background\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Grid\u3011<\/p>\n<p>Set the line color of the grid.<\/p>\n<p>\u3010Horizontal\u3011<\/p>\n<p>Select to display the horizontal grid lines.<\/p>\n<p>\u3010Vertical\u3011<\/p>\n<p>Select to display the vertical grid lines.<\/p>\n<p>\u3010Background\u3011<\/p>\n<p>Set the background color.<\/p>\n<p>\u3010Current Recipe Background\u3011<\/p>\n<p>Set the background color for the currently selected recipe group.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Data\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Font\u3011<\/p>\n<p>Set the data font.<\/p>\n<p>\u3010Size\u3011<\/p>\n<p>Set the data font size.<\/p>\n<p>\u3010Customized Height\u3011<\/p>\n<p>User can customized the height of the data field.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Scroll Bar\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Width\u3011<\/p>\n<p>Adjust the right side scroll bar width, provides 5 widths.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.32.2 \u3010Data Item\u3011<\/h5>\n<p>\u3010Recipe Table\u3011\u3010Data Item\u3011setting paging as shown below, the meaning of each setting is as follows :<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-294.png\" \/><\/p>\n<p>Figure 360\u3010Data Item\u3011Setting Page of\u3010Recipe Table\u3011<\/p>\n<p>Table 227\u3010Data Item\u3011Setting Properties of\u3010Recipe Table\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Set Recommended Width to All Columns\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>When this button is pressed, the software calculates the required column width at the time of planning and sets its field width.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Vertical Header Width (Recipe Parameter Name)\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the column width of\u3010Recipe Table\u3011header.<\/p>\n<p>\u3010Column Width\u3011<\/p>\n<p>Set the column width of\u3010Recipe Table\u3011field, in addition to the left field, this\u3010Transpose\u3011option needs to be checked.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Copy Width(Recipe Set Name)\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Select a parameter name from below, and then click this button to change the settings of other items to the same as the settings of the item selected.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Show\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Use the checkbox to set whether to display this recipe.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Color\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set color of the parameter data.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Alignment\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Determine the alignment of the parameter data.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Column width\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the column width of recipe parameter.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.32.3 \u3010Advanced\u3011<\/h5>\n<p>\u3010Recipe Table\u3011\u3010Advanced\u3011setting paging as shown below, the meaning of each setting is as follows :<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-295.png\" \/><\/p>\n<p>Figure 361\u3010Advanced\u3011Setting Page of\u3010Recipe Table\u3011<\/p>\n<p>Table 228\u3010Advanced\u3011Setting Properties of\u3010Recipe Table\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Use Filter\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Check whether to enable this filter function or not.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Filter Recipe Name\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Display the recipe group that is filter by recipe name.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-296.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Filter Recipe Parameter(String Type)\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Display the recipe group that is filter by recipe parameters.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-297.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Filter String Address\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the address for filtering the string.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.32.4 \u3010Sub Switch\u3011<\/h5>\n<p>\u3010Recipe Table\u3011\u3010Sub Switch\u3011setting paging as shown below, the meaning of each setting is as follows :<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-298.jpg\" \/><\/p>\n<p>Figure 362\u3010Sub Switch\u3011Setting Page of\u3010Recipe Table\u3011<\/p>\n<p>Table 229\u3010Sub Switch\u3011Setting Properties of\u3010Recipe Table\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Sub Switch List\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>If the\u3010Save\u3011or\u3010Load\u3011button is selected from the table, corresponding buttons will also appear at the top-right side of the recipe table in the workspace after pressing the\u3010OK\u3011button.<\/p>\n<p>\u3010Save\u3011<\/p>\n<p>If the user presses this button during execution, the current parameter contents of the\u3010Recipe Table\u3011will be saved to the recipe group file configured in the recipe setting.<\/p>\n<p>\u3010Load\u3011<\/p>\n<p>If the user presses this button during execution, the contents of the recipe group file configured in the recipe setting will be loaded into the\u3010Recipe Table\u3011.<\/p>\n<p>\u3010Auto Scroll\u3011<\/p>\n<p>When the\u3010Control Address of Recipe No.\u3011has changed, the recipe table will jump to the corresponding recipe.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Display\u3011\u3010Text\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Direct Text Font\u3011<\/p>\n<p>Set the text font of the sub switch currently selected.<\/p>\n<p>\u3010Direct Text Size\u3011<\/p>\n<p>Set the text size of the sub switch currently selected.<\/p>\n<p>\u3010Position\u3011<\/p>\n<p>Set the text position of the sub switch currently selected.<\/p>\n<p>\u3010Format\u3011<\/p>\n<p>Set the text format of the sub switch currently selected, including Bold, Italics and Underline.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the text color of the sub switch currently selected.<\/p>\n<p>\u3010Content(Direct Text)\u3011<\/p>\n<p>Set the text of the sub switch currently selected.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Display\u3011\u3010Background\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the background of the sub switch currently selected. Check it to activate background settings, and the displayed background of the sub switch currently selected can be edited below. If this option is not checked, the background will be transparent.<\/p>\n<p>\u3010Use Image\u3011<\/p>\n<p>Set to use an image for the displayed background of the sub switch currently selected. When this option is checked, an image selection setting item will appear asking the user to select an image either from the\u3010Image Library\u3011or from a file.<\/p>\n<p>\u3010Background Color\u3011<\/p>\n<p>Set the background color of the sub switch currently selected. This setting will appear if\u3010Use Image\u3011was not selected. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Display\u3011\u3010While Pressing\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Individual Buzzer Setting\u3011<\/p>\n<p>Can individually setup buzzer setting.<\/p>\n<p>Includes 5 modes: Off, Short, Long, Short-Short, Long-Short.<\/p>\n<p>\u3010Play Audio\u3011<\/p>\n<p>Select to play audio when the sub switch is pressed. An\u3010Audio Selector\u3011will appear on the right when enabled. The switch on the right of the\u3010Audio Selector\u3011can be pressed to select an audio and the switch on the left of the\u3010Audio Selector\u3011can be pressed to play the audio selected. <\/p>\n<p>\u3010Pressing Effect\u3011<\/p>\n<p>Set the pressing effect of the sub switch currently selected. There are two effects available for selection:\u3010None\u3011and\u3010Highlight\u3011.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Advanced\u3011\u3010Operation Control\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Operation control of sub switch, it can enabled by bit or security.<\/p>\n<p>\u3010Enable by Bit\u3011<\/p>\n<p>Check whether the sub switch operation is controlled by a bit<\/p>\n<p>\u3010Show Disabled Sign\u3011<\/p>\n<p>Check if you want to display the forbidden symbol, it\u2019s valid when check\u3010Enable by Bit\u3011,\u3010Enabled by Word\u3011or\u3010Enable by Security\u3011.<\/p>\n<p>\u3010Address\u3011<\/p>\n<p>Set the address of the sub switch operation control bit.<\/p>\n<p>\u3010State\u3011<\/p>\n<p>Set the control bit as 1 or 0 to operate object. <\/p>\n<p>\u3010Enabled by Word\u3011<\/p>\n<p>Check whether the operation is controlled by word.<\/p>\n<p>\u3010Address\u3011<\/p>\n<p>Set the operation control word address.<\/p>\n<p>\u3010Condition\u3011<\/p>\n<p>Set the condition of word control and when it is true then the object can be controlled, when false not the object can not be controlled. The condition include\u2019 =\u2019,\u2019 !=\u2019, \u2018&gt;\u2019, \u2018&lt;\u2019, \u2018&gt;=\u2019, \u2018&lt;=\u2019.<\/p>\n<p>\u3010Enable by Security\u3011<\/p>\n<p>Select the sub switch whether controlled by user level.<\/p>\n<p>\u3010User Level Condition\u3011<\/p>\n<p>Set the level and condition of the object.<\/p>\n<p>\u3010Hold Time\u3011<\/p>\n<p>Check whether the operation is controlled by hold time. Hold time can be divided into two kinds:<\/p>\n<ul>\n<li>\u3010Press On\u3011: press directly, according to the\u3010Min. Hold Time\u3011to confirm whether the operation is executed.<\/li>\n<li>\u3010Double Press\u3011: quickly double press to confirm whether the operation is executed.<\/li>\n<\/ul>\n<p>\u3010Operator Confirm\u3011<\/p>\n<p>Check whether show comfirmation message window after checking the operation.<\/p>\n<p>\u3010Max. Waiting Time\u3011<\/p>\n<p>When the confirmation message window is displayed, If the user does not reply within this time, the system will close the confirmation message window and cancel this operation<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h4>19.4.33 \u3010Operation Viewer\u3011<\/h4>\n<p>\u3010Operation Viewer\u3011is an object used to read the Recording Buffer data of the\u3010Operation Log\u3011. Its main functions are as follows:<\/p>\n<ul>\n<li>View the Recording Buffer data of the\u3010Operation Log\u3011.<\/li>\n<li>Data filter function, which displays items that the user is only interested in.<\/li>\n<li>Pause or start updating the data of the Recording Buffer through the\u3010Sub Switch\u3011, and clear or save the data in the Recording Buffer.<\/li>\n<\/ul>\n<h5>19.4.33.1 \u3010General\u3011<\/h5>\n<p>\u3010Operation Viewer\u3011\u3010General\u3011setting paging as shown below, the meaning of each setting is as follows :<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-299.png\" \/><\/p>\n<p>Figure 363\u3010General\u3011Setting Screen of\u3010Operation Viewer\u3011<\/p>\n<p>Table 230\u3010General\u3011Setting Properties of\u3010Operation Viewer\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Preview\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Preview the appearance of this object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Name\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The default name of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Comment\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the comment of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Header\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Select to display the header.<\/p>\n<p>\u3010Font\u3011<\/p>\n<p>Set the font of the header.<\/p>\n<p>\u3010Size\u3011<\/p>\n<p>Set the size of the header.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the color of the header.<\/p>\n<p>\u3010Background\u3011<\/p>\n<p>Set the background color of the header.<\/p>\n<p>\u3010Customized Height\u3011<\/p>\n<p>User can customized the height of the header field.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Border\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Select to display the border.<\/p>\n<p>\u3010Type\u3011<\/p>\n<p>Set the border type.<\/p>\n<p>\u3010Color\/Width\u3011<\/p>\n<p>Set the color and width of the border.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Grid\/Background\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Grid\u3011<\/p>\n<p>Set the color of the grid.<\/p>\n<p>\u3010Horizontal\u3011<\/p>\n<p>Select to display horizontal gridlines.<\/p>\n<p>\u3010Vertical\u3011<\/p>\n<p>Select to display vertical gridlines.<\/p>\n<p>\u3010Background\u3011<\/p>\n<p>Set the color of the background.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Data\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Show Oldest Data First\u3011<\/p>\n<p>Set whether to display the oldest data in the top of the form, if unchech then the oldest data will in the bottom of the form. <\/p>\n<p>\u3010Font for String from Direct Text\u3011<\/p>\n<p>The font of the string can be set here.<\/p>\n<p>\u3010Size\u3011<\/p>\n<p>Set the font size for the direct text.<\/p>\n<p>\u3010Font for String from Text Library\u3011<\/p>\n<p>The font and size of the string can be set here.<\/p>\n<p>\u3010Customized Height\u3011<\/p>\n<p>User can customized the height of the data field.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Scroll Bar\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Width\u3011<\/p>\n<p>Adjust the right side scroll bar width, provides 5 widths.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.33.2 \u3010Content\u3011<\/h5>\n<p>\u3010Operation Viewer\u3011\u3010Content\u3011setting paging as shown below, the meaning of each setting is as follows :<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-300.png\" \/><\/p>\n<p>Figure 364\u3010Content\u3011Setting Screen of\u3010Operation Viewer\u3011<\/p>\n<p>Table 231\u3010Content\u3011Setting Properties of\u3010Operation Viewer\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Set Recommended Width to All Columns\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>When this button is pressed, the software calculates the required column width at the time of planning and sets its field width.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Content\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Every Operation Log data entry includes information; users can choose to display the items they are interested in. The following are the descriptions of each item:<\/p>\n<ul>\n<li>\u3010Number\u3011<\/li>\n<\/ul>\n<p>Operation Log serial number.<\/p>\n<ul>\n<li>\u3010Date\u3011<\/li>\n<\/ul>\n<p>Operation Log date. Can select the format of the date in the right.<\/p>\n<ul>\n<li>\u3010Time\u3011<\/li>\n<\/ul>\n<p>Operation Log time. Can select the format of the time in the right.<\/p>\n<ul>\n<li>\u3010User ID\u3011<\/li>\n<\/ul>\n<p>The current user name; when\u3010Security Manager\u3011-&gt;\u3010Mode\u3011is\u3010Level\u3011, no information will be recorded in this field.<\/p>\n<p>When\u3010Mode\u3011is\u3010User\u3011, the current signer will display, however, if the security level is forced to change by address(\u3010Security Level\u3011address of\u3010Project Explorer\u3011-&gt; \u3010Unit Setting\u3011-&gt; \u3010Control Address\u3011), the user ID will be displayed as &quot;?&quot; Until the next normal login, this field will show the current login.<\/p>\n<ul>\n<li>\u3010Level\u3011<\/li>\n<\/ul>\n<p>The level of the current user.<\/p>\n<ul>\n<li>\u3010Screen\u3011<\/li>\n<\/ul>\n<p>The screen the operating object is located.<\/p>\n<ul>\n<li>\u3010Part ID\u3011<\/li>\n<\/ul>\n<p>The ID of the operating object.<\/p>\n<ul>\n<li>\u3010Comment\u3011<\/li>\n<\/ul>\n<p>The comment of the operating object.<\/p>\n<ul>\n<li>\u3010Message\u3011<\/li>\n<\/ul>\n<p>The message of the operating object.<\/p>\n<ul>\n<li>\u3010Address\u3011<\/li>\n<\/ul>\n<p>The access address of the operating object.<\/p>\n<ul>\n<li>\u3010Previous Value\u3011<\/li>\n<\/ul>\n<p>The previous value of the access address content for the operating object.<\/p>\n<ul>\n<li>\u3010Changed Value\u3011<\/li>\n<\/ul>\n<p>The current value of the changed access address content for the operating object.<\/p>\n<p>The setting of the items can be divided into:<\/p>\n<ul>\n<li>\u3010Display\u3011<\/li>\n<\/ul>\n<p>Set the visibility of this item.<\/p>\n<ul>\n<li>\u3010Text\u3011<\/li>\n<\/ul>\n<p>Set the display text for the header. The text can be entered directly or selected from the text library.<\/p>\n<ul>\n<li>\u3010Color\u3011<\/li>\n<\/ul>\n<p>The color of this item.<\/p>\n<ul>\n<li>\u3010Column Width\u3011<\/li>\n<\/ul>\n<p>The column width of this item.<\/p>\n<ul>\n<li>\u3010Alignment\u3011<\/li>\n<\/ul>\n<p>The alignment method of this item.<\/p>\n<ul>\n<li>\u3010Type\u3011<\/li>\n<\/ul>\n<p>This setting is only available for\u3010Date\u3011 and\u3010Time\u3011. It sets the display format.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.33.3 \u3010Sub Switch\u3011<\/h5>\n<p>\u3010Operation Viewer\u3011\u3010Sub Switch\u3011setting paging as shown below, the meaning of each setting is as follows :<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-301.jpg\" \/><\/p>\n<p>Figure 365\u3010Sub Switch\u3011Setting Screen of\u3010Operation Viewer\u3011<\/p>\n<p>Table 232\u3010Sub Switch\u3011Setting Properties of\u3010Operation Viewer\u3011<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Sub Switch List\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Sub Switch List\u3011that can be selected for\u3010Operation Viewer\u3011. Sub switches can be enabled after selecting them. Settings for the appearance of the selected sub switches will also appear on the right.<\/p>\n<p>When different sub switches are selected from the list, the setting contents of the appearance setting items to the right will be updated according to the sub switches selected.<\/p>\n<p>In which the\u3010Sub Switches\u3011are divided into:<\/p>\n<ul>\n<li>\u3010Save\u3011- Save the Recording Buffer data of the\u3010Operation Log\u3011into a CSV file.<\/li>\n<li>\u3010Clear\u3011- Clear the Recording Buffer data of the\u3010Operation Log\u3011.<\/li>\n<li>\u3010Save &amp; Clear\u3011- Saves the Recording Buffer data of the\u3010Operation Log\u3011into a CSV file and then clears the data.<\/li>\n<\/ul>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Display\u3011\u3010Text\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Direct Text Font\u3011<\/p>\n<p>Set the text font of the sub switch currently selected.<\/p>\n<p>\u3010Direct Text Size\u3011<\/p>\n<p>Set the text size of the sub switch currently selected.<\/p>\n<p>\u3010Position\u3011<\/p>\n<p>Set the text position of the sub switch currently selected.<\/p>\n<p>\u3010Format\u3011<\/p>\n<p>Set the text format of the sub switch currently selected, including Bold, Italics and Underline.<\/p>\n<p>\u3010Color\u3011<\/p>\n<p>Set the text color of the sub switch currently selected.<\/p>\n<p>\u3010Content(Direct Text)\u3011<\/p>\n<p>Set the text of the sub switch currently selected, the text can be entered directly or selected from the\u3010Text Library\u3011.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Display\u3011\u3010Background\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the background of the sub switch currently selected. Check it to activate background settings, and the displayed background of the sub switch currently selected can be edited below. If this option is not checked, the background will be transparent.<\/p>\n<p>\u3010Use Image\u3011<\/p>\n<p>Set to use an image for the displayed background of the sub switch currently selected. When this option is checked, an image selection setting item will appear asking the user to select an image either from the\u3010Image Library\u3011or from a file.<\/p>\n<p>\u3010Background Color\u3011<\/p>\n<p>Set the background color of the sub switch currently selected. This setting will appear if \u3010Use Image\u3011was not selected. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Display\u3011\u3010while Pressing\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Individual Buzzer Setting\u3011<\/p>\n<p>Can individually setup buzzer setting.<\/p>\n<p>Includes 5 modes: Off, Short, Long, Short-Short, Long-Short.<\/p>\n<p>\u3010Play Audio\u3011<\/p>\n<p>Select to play audio when the sub switch is pressed. An\u3010Audio Selector\u3011will appear on the right when enabled. The switch on the right of the\u3010Audio Selector\u3011can be pressed to select an audio and the switch on the left of the\u3010Audio Selector\u3011can be pressed to play the audio selected. <\/p>\n<p>\u3010Pressing Effect\u3011<\/p>\n<p>Set the pressing effect of the sub switch currently selected. There are two effects available for selection:\u3010None\u3011and\u3010Highlight\u3011.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Advanced\u3011\u3010Operation Control\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Operation control of sub switch, it can enabled by bit or security.<\/p>\n<p>\u3010Enable by Bit\u3011<\/p>\n<p>Check whether the sub switch operation is controlled by a bit<\/p>\n<p>\u3010Address\u3011<\/p>\n<p>Set the address of the sub switch operation control bit.<\/p>\n<p>\u3010State\u3011<\/p>\n<p>Set the control bit as 1 or 0 to operate object. <\/p>\n<p>\u3010Enabled by Word\u3011<\/p>\n<p>Check whether the operation is controlled by word.<\/p>\n<p>\u3010Address\u3011<\/p>\n<p>Set the operation control word address.<\/p>\n<p>\u3010Condition\u3011<\/p>\n<p>Set the condition of word control and when it is true then the object can be controlled, when false not the object can not be controlled. The condition include\u2019 =\u2019,\u2019 !=\u2019, \u2018&gt;\u2019, \u2018&lt;\u2019, \u2018&gt;=\u2019, \u2018&lt;=\u2019.<\/p>\n<p>\u3010Enable by Security\u3011<\/p>\n<p>Select the sub switch whether controlled by user level.<\/p>\n<p>\u3010User Level Condition\u3011<\/p>\n<p>Set the level and condition of the object.<\/p>\n<p>\u3010Show Disabled Sign\u3011<\/p>\n<p>Check if you want to display the forbidden symbol, it\u2019s valid when check\u3010Enable by Bit\u3011,\u3010Enabled by Word\u3011 or\u3010Enable by Security\u3011.<\/p>\n<p>\u3010Hold Time\u3011<\/p>\n<p>Check whether the operation is controlled by hold time. Hold time can be divided into two kinds:<\/p>\n<ul>\n<li>\u3010Press On\u3011: press directly, according to the\u3010Min. Hold Time\u3011to confirm whether the operation is executed.<\/li>\n<li>\u3010Double Press\u3011: quickly double press to confirm whether the operation is executed.<\/li>\n<\/ul>\n<p>\u3010Operator Confirm\u3011<\/p>\n<p>Check whether show comfirmation message window after checking the operation.<\/p>\n<p>\u3010Max. Waiting Time\u3011<\/p>\n<p>When the confirmation message window is displayed, If the user does not reply within this time, the system will close the confirmation message window and cancel this operation<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h4>19.4.34 \u3010Schedule Setting Table\u3011<\/h4>\n<p>\u3010Schedule Setting Table\u3011is the object that used to read\u3010Schedule\u3011of\u3010Function\u3011inside the\u3010Project Exploer\u3011, so need to plan the\u3010Schedule\u3011function first. In addition to its main function can show the start time of the schedule, the end time, the start date, etc., allows designers to quickly design, but also provides HMI operation to dynamically change the start time and end time of each schedule<\/p>\n<h5>19.4.34.1 \u3010General\u3011<\/h5>\n<p>\u3010Schedule Setting Table\u3011\u3010General\u3011setting paging as shown below, the meaning of each setting is as follows :<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-302.png\" \/><\/p>\n<p>Figure 366\u3010Schedule Setting Table\u3011\u3010General\u3011setting paging<\/p>\n<p>Table 233\u3010Schedule Setting Table\u3011\u3010General\u3011property setting<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Preview\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Preview the appearance of this object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Name\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The default name of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Comment\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the comment of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010General\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Show Schedule\u3011<\/p>\n<p>click\u3010Setting\u3011on the right, able to select scheduled schedule group number in the\u3010Schedule\u3011function.<\/p>\n<p>\u3010Row Height\u3011<\/p>\n<p>Set each of the row height in the table. <\/p>\n<p>\u3010Font\u3011<\/p>\n<p>Set the font of the text in the table.<\/p>\n<p>\u3010Text Size\u3011<\/p>\n<p>Set the text size in the table.<\/p>\n<p>\u3010Text Alignment\u3011<\/p>\n<p>Set the alignment of the text in the table, including left, center, right and so on\u3002<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Header\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Text Color\u3011<\/p>\n<p>Set the text color of the header.<\/p>\n<p>\u3010Background Color\u3011<\/p>\n<p>Set the background color.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Content\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Text Color\u3011<\/p>\n<p>Set the text color of the content. <\/p>\n<p>\u3010Background Color\u3011<\/p>\n<p>Set the background color.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Border\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Type\u3011<\/p>\n<p>Set border type.<\/p>\n<p>\u3010Color\/Width\u3011<\/p>\n<p>Set the color and width of the border.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Grid\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Horizontal\u3011<\/p>\n<p>Check whether you want to display the horizontal and set the horizontal color.<\/p>\n<p>\u3010Vertical\u3011<\/p>\n<p>Check whether you want to display the vertical and set the vertical color<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Scroll Bar\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Width\u3011<\/p>\n<p>Adjust the right side scroll bar width, provides 5 widths.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.34.2 \u3010Header\u3011<\/h5>\n<p>\u3010Schedule Setting Table\u3011\u3010Header\u3011setting paging as shown below, the meaning of each setting is as follows :<\/p>\n<p> <img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-303.png\" \/><\/p>\n<p>Figure 367\u3010Schedule Setting Table\u3011\u3010Header\u3011setting paging<\/p>\n<p>Table 234\u3010Schedule Setting Table\u3011\u3010Header\u3011property setting<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Set Recommended Width to All Columns\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>When this button is pressed, the software calculates the required column width at the time of planning and sets its field width.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Content\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Each of the schedule includes multiple information, the user can select the item using the checklist and can change the title display text on the right, the following is a description of each item:<\/p>\n<ul>\n<li>\u3010Group\u3011<\/li>\n<\/ul>\n<p>The group serial number of the schedule.<\/p>\n<ul>\n<li>\u3010Comment\u3011<\/li>\n<\/ul>\n<p>    Comment of the schedule.<\/p>\n<ul>\n<li>\u3010Time Type\u3011<\/li>\n<\/ul>\n<p>The type of the schedule is a constant or an address.<\/p>\n<ul>\n<li>\u3010Start Time\u3011<\/li>\n<\/ul>\n<p>Start time of the schedule.<\/p>\n<ul>\n<li>\u3010End Time\u3011<\/li>\n<\/ul>\n<p>End time of the schedule.<\/p>\n<ul>\n<li>\u3010Start Day\u3011<\/li>\n<\/ul>\n<p>Start day of the schedule.<\/p>\n<ul>\n<li>\u3010Set\u3011<\/li>\n<\/ul>\n<p>Press to modify the start and end times of each schedule.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h4>19.4.35 \u3010Video Input Display\u3011<\/h4>\n<p>\u3010Video Input Display\u3011can be used to display the video of the camera that connected to the HMI USB port, for the setting of USB camera image parameters, please refer to <strong>Chapter3.3.3- Video <\/strong>Input .<\/p>\n<h5>19.4.35.1 \u3010Setting\u3011<\/h5>\n<p>\u3010Video Input Display\u3011\u3010Setting\u3011setting paging as shown below, the meaning of each setting is as follows :<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-304.png\" \/><\/p>\n<p>Figure 368\u3010Video Input Display\u3011\u3010Setting\u3011setting paging<\/p>\n<p>Table 235\u3010Video Input Display\u3011\u3010Setting\u3011setting property<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Property<\/p>\n<\/td>\n<td>\n<p>Description<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Preview\u3011<\/p>\n<\/td>\n<td>\n<p>Preview the appearance of this object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Name\u3011<\/p>\n<\/td>\n<td>\n<p>The default name of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Comment\u3011<\/p>\n<\/td>\n<td>\n<p>Set the comment of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3010Basic\u3011<\/p>\n<\/td>\n<td>\n<p>\u3010Auto Play\u3011<\/p>\n<p>Set wether to auto play when swith to this page when the camera was not started yet.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h4>19.4.36 \u3010IP Camera Player\u3011<\/h4>\n<p>Usage Notes:<\/p>\n<ol>\n<li>When the player is in playback mode, the Screen Saver will be disabled and will only be re-enabled after playback stops.<\/li>\n<li>If Visibility Control is enabled, when the object is hidden, the stream will stop and the pre-recorded buffer will be cleared. When the object becomes visible again, the stream will enter playback mode if Auto Play is enabled.<\/li>\n<\/ol>\n<h5>19.4.36.1 \u3010General\u3011<\/h5>\n<p>This section only introduces the Player configuration properties. For camera configuration, please refer to the relevant camera settings section3.3.3.2-IP Camera<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-305.png\" \/><\/p>\n<p>Figure 369\u3010IP Camera Player\u3011\u3010General\u3011setting paging<\/p>\n<p>Table 236\u3010IP Camera Player\u3011\u3010General\u3011property setting<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Basic\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Selected IP Camera\u3011Click the Edit button on the right to open the selector window where one or more cameras can be selected.<\/p>\n<p>\u3010Auto Reconnect\u3011When enabled, if the network camera fails to play normally, the system will automatically attempt to reconnect.<\/p>\n<p>Interval : Default 20 seconds, range 10\u2013600 seconds<\/p>\n<p>Attempts : Default 5 times, range 1\u2013999 times<\/p>\n<p>\u3010Auto -play on startup\u3011When enabled, playback will start automatically when the object is initialized or changes from hidden to visible. Hover the mouse over the exclamation icon for additional information.<\/p>\n<p>\u3010Current Name\u3011Displays the name of the currently playing network camera using the configured register.<\/p>\n<p>\u3010Notice\u3011Supported streaming formats are as follows. Please verify that the network camera&#8217;s stream settings comply: <\/p>\n<ul>\n<li>Video: H.264, MJPEG<\/li>\n<li>Audio: G.711<\/li>\n<li>To reduce network load and ensure playback and recording stability,, it is recommended to set the camera resolution below 720p, the frame rate no higher than 15 fps, and the bitrate under 1 Mbps.<\/li>\n<li>If the ip camera does not have audio enabled, or if the audio settings are disabled, playback and recording will not include sound.<\/li>\n<li>Default file storage path: &#8230;\/internal\/ipcam<\/li>\n<\/ul>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Automatic camera switching\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Rotation Interval\u3011<strong> <\/strong>Range: 10\u201386400 seconds<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Snapshot\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010File Save Destination\u3011<\/p>\n<ul>\n<li>PC models: Default \/ Custom<\/li>\n<li>HMI models: Default \/ USB \/ SD<\/li>\n<\/ul>\n<p>\u3010File Save Path\u3011When \u3010Custom\u3011,\u3010USB\u3011, or\u3010SD\u3011 is selected, the path can be edited.<br \/>If \u3010Custom\u3011 is selected, a Browse button will appear on the right, allowing you to select a directory on the computer.<\/p>\n<p>\u3010File Save Name\u3011Defines the file name for saving screenshots. Variables can be used.<\/p>\n<p>Variables available:<\/p>\n<p>%i : Index number (starts from 1, automatically increments based on files in the directory)<\/p>\n<p>%N : Camera name defined in the Network Camera Page<\/p>\n<p>%d : Date (format: yyyymmdd)<\/p>\n<p>%t : Time (format: hhMMss)<\/p>\n<p>\u3010Image Format\u3011Selectable formats: JPG or PNG<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Enable Event Recording\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010File Save Destination\u3011<\/p>\n<ul>\n<li>PC models: Default \/ Custom<\/li>\n<li>HMI models: Default \/ USB \/ SD<\/li>\n<\/ul>\n<p>\u3010File Save Path\u3011When \u3010Custom\u3011,\u3010USB\u3011, or\u3010SD\u3011 is selected, the path can be edited.<br \/>If \u3010Custom\u3011 is selected, a Browse button will appear on the right, allowing you to select a directory on the computer.<\/p>\n<p>\u3010File Save Name\u3011Defines the file name for saving screenshots. Variables can be used.<\/p>\n<p>Variables available:<\/p>\n<p>%i : Index number (starts from 1, automatically increments based on files in the directory)<\/p>\n<p>%N : Camera name defined in the Network Camera Page<\/p>\n<p>%d : Date (format: yyyymmdd)<\/p>\n<p>%t : Time (format: hhMMss)<\/p>\n<p>\u3010Pre-trigger recording\/Post-trigger recording\u3011<\/p>\n<p>Example:<br \/>If 30 seconds before and 30 seconds after trigger are configured and the trigger occurs at 12:00:00, the recording will cover:<\/p>\n<p>11:59:31 \u2192 12:00:30<\/p>\n<p>Total video length: 1 minute<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Enable Audio\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Enable Audio\u3011If disabled, playback and recording will not include sound.<\/p>\n<p>\u3010Default Volume Level\u3011<\/p>\n<p>Range <strong>0\u2013100<\/strong><br \/>(0 = mute)<\/p>\n<p>\u3010Automatically mute after playback\u3011When enabled, the volume will automatically be set to 0 when playback starts.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Notify\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010State\u3011Displays the current player status.<\/p>\n<p>\u3010Error\u3011Displays the player error code.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.36.2 \u3010Player Interface\u3011<\/h5>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-306.png\" \/><\/p>\n<p>Figure 370\u3010Player Interface\u3011Setting Page<\/p>\n<p>Table 237\u3010Player Interface\u3011Properties Setting<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Show playback button\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Plays the network camera stream.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Show previous\/next button\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Switches the currently displayed camera.<br \/>If no other cameras are available, the button will have no effect.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Show stop button\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Stops the camera stream.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Show snapshot button\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Captures the current video frame.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Show event recording  button\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Starts recording.<br \/>If recording is not enabled, pressing the button will have no effect.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Show volumn button\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Displays a volume slider that can be adjusted.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>Important Notes<\/p>\n<ul>\n<li>The player interface uses an embedded design.<br \/>When the HMI screen is touched, the control interface appears. Tapping outside the interface hides it.<\/li>\n<li>The component layout is fixed and cannot be modified.<\/li>\n<li>The component size automatically scales based on the object size and the number of enabled components.<\/li>\n<\/ul>\n<h5>19.4.36.3 \u3010Control\u3011<\/h5>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-307.png\" \/><\/p>\n<p>Figure 371\u3010IP Camera Player\u3011\u3010Control\u3011Setting Page<\/p>\n<p>Table 238\u3010IP Camera Player\u3011\u3010Control\u3011Properties Setting<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Camera\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Uses a register to set the <strong>currently displayed camera index number<\/strong>.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Playback Control\u3011<\/strong><\/p>\n<\/td>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Value (16-bit UINT)<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Definition<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>0<\/p>\n<\/td>\n<td>\n<p>None<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>1<\/p>\n<\/td>\n<td>\n<p>Play<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>2<\/p>\n<\/td>\n<td>\n<p>Stop playback<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Skip\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Use a Bit to switch to the previous or next camera.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Snapshot\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Use a Bit to trigger a screenshot.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Event Recording\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Use a Bit to trigger recording.<br \/>Detailed settings refer to the General section.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Volumn Level\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Use a register to control the volume (range 0\u2013100).<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Auto Camera Switch\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Use a register to configure camera rotation.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.36.4 \u3010PTZ\u3011<\/h5>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-308.png\" \/><\/p>\n<p>Figure 372\u3010IP Camera Player\u3011\u3010PTZ\u3011Setting Page<\/p>\n<p>Table 239\u3010IP Camera Player\u3011\u3010PTZ\u3011Properties Setting<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Basic\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Movement Velocity\u3011<\/p>\n<p>Sets the camera movement speed vector.<br \/>Range 0.1\u20131.0<br \/>Higher values result in faster movement.<br \/>Default: 0.5<\/p>\n<p>Due to mechanical inertia, the camera may slightly overshoot the target position when stopping and may automatically adjust back to the correct angle.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Control\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Service Reconnect\u3011Reconnect to the PTZ service.<\/p>\n<p>\u3010Enable Absolute Move\u3011Quickly move the camera to a specific angle.<\/p>\n<p>\u3010Pan Position\u3011Set the horizontal angle.<\/p>\n<p>\u3010Tilt Position\u3011Set the vertical angle.<\/p>\n<p>\u3010Update\u3011Trigger movement via a Bit.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>The valid range for <strong>Pan Position<\/strong> and <strong>Tilt Position<\/strong> is <strong>-1.0 to 1.0<\/strong>, representing relative camera positions.<\/p>\n<p>The actual angle range depends on the camera model.<\/p>\n<p>Example mapping:<\/p>\n<div class=\"fatek-tw\">\n<table>\n<thead>\n<tr>\n<th>\n<p><strong>Value<\/strong><\/p>\n<\/th>\n<th>\n<p><strong>Possible Angle<\/strong><\/p>\n<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>\n<p>Tilt = -1.0<\/p>\n<\/td>\n<td>\n<p>\u2248 90\u00b0<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Tilt = 1.0<\/p>\n<\/td>\n<td>\n<p>\u2248 0\u00b0<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Pan = 0.0<\/p>\n<\/td>\n<td>\n<p>\u2248 0\u00b0<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Pan = 1.0<\/p>\n<\/td>\n<td>\n<p>\u2248 180\u00b0<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Pan = -1.0<\/p>\n<\/td>\n<td>\n<p>\u2248 180\u00b0<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Pan \u2248 0.03<\/p>\n<\/td>\n<td>\n<p>\u2248 355\u00b0<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<p>If the displayed position differs from the actual angle, use <strong>Update<\/strong> to re-query the correct position.<\/p>\n<p>Because camera manufacturers implement PTZ differently, users must test the mapping themselves.<\/p>\n<p>The player <strong>must be in playback mode (status = 2)<\/strong> for PTZ control to function correctly.<\/p>\n<h5>19.4.36.5 \u3010Sub Switch\u3011<\/h5>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-309.png\" \/><\/p>\n<p>Figure 373\u3010IP Camera Player\u3011\u3010Sub Switch\u3011Setting Page<\/p>\n<p>Table 240\u3010IP Camera Player\u3011\u3010Sub Switch\u3011Properties Setting<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Play\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Start the player.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Stop\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Stop the player.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Next\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Switch to the previous camera.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Prev\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Switch to the next camera.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Snapshot\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Capture a screenshot.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Record\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Start recording.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Up\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Press and hold to move the camera upward continuously.<br \/>Release to stop.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Down\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Press and hold to move the camera downward continuously.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Left\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Press and hold to move the camera left continuously.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Right\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Press and hold to move the camera right continuously.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010ULeft\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Move upward + left.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010URight\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Move upward + right.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010DLeft\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Move downward + left.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010DRight\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Move downward + right.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010ZI\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Press and hold to zoom in.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010ZO\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Press and hold to zoom out.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h4>19.4.37 \u3010SQL Query Table\u3011<\/h4>\n<p>Use\u3010SQL Query Table\u3011to display the execution results of\u3010SQL Query\u3011commands.<\/p>\n<h5>19.4.37.1 \u3010General\u3011<\/h5>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-310.png\" \/><\/p>\n<p>Figure 374\u3010SQL Query Table\u3011\u3010General\u3011setting paging<\/p>\n<p>Table 241\u3010SQL Query Table\u3011\u3010General\u3011property setting<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Name\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The default name of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Comment\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the comment of the object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Preview\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Preview the appearance of this object.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Basic\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010SQL Query\u3011<\/p>\n<p>If the user adds the SQL query setting to the database function, the SQL query list can be seen here.<\/p>\n<p>The selected SQL query execution result will be displayed on the table.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Header\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Check whether to show header<\/p>\n<p>\u3010Font\u3011<\/p>\n<p>Set the header\u2019s font<\/p>\n<p>\u3010Font Size\u3011<\/p>\n<p>Set the header\u2019s font size<\/p>\n<p>\u3010Font Color\u3011<\/p>\n<p>Set the header\u2019s font color<\/p>\n<p>\u3010Background\u3011<\/p>\n<p>Set the header\u2019s background<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Border\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Type\u3011<\/p>\n<p>Set border type.<\/p>\n<p>\u3010Color\/Width\u3011<\/p>\n<p>Set the color and width of the border.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Grid\/Background\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Grid\u3011<\/p>\n<p>Set the grid\u2019s color<\/p>\n<p>\u3010Horizontal\u3011<\/p>\n<p>Check whether to display the horizontal line and set the color of the horizontal line<\/p>\n<p>\u3010Vertical\u3011<\/p>\n<p>Check whether to display the vertical line and set the color of the vertical line<\/p>\n<p>\u3010Background\u3011<\/p>\n<p>Set the color of the table background<\/p>\n<p>\u3010Row Selected\u3011<\/p>\n<p>Set the color to be displayed when you are elected to the specified row and column<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Additional information\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Index\u3011<\/p>\n<p>Check whether to display index<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Data\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Font\u3011<\/p>\n<p>Set the data\u2019s font<\/p>\n<p>\u3010Font Size\u3011<\/p>\n<p>Set the data\u2019s font size<\/p>\n<p>\u3010Customized Height\u3011<\/p>\n<p>The height of the data row can be set according to requirements<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Scroll Bar\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Width\u3011<\/p>\n<p>Adjust the right side scroll bar width, provides 5 widths.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.37.2 \u3010Data Item\u3011<\/h5>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-311.png\" \/><\/p>\n<p>Figure 375\u3010SQL Query Table\u3011\u3010Data Item\u3011Setting Page<\/p>\n<p>Table 242\u3010SQL Query Table\u3011\u3010Data Item\u3011Properties Setting<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Set Recommended Width to All Columns\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>When this button is pressed, the software calculates the required column width at the time of planning and sets its field width.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Additional Information\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the width and text color of the title in the left column of\u3010Index\u3011.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Copy the Selected Item to Others\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\tSelect one of the parameter names in the column below, and then click this button to change the settings of other items to be the same as the settings of the selected item.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Color\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the color of the data.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Alignment\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Decide how to align the data<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Width\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the field width of the data<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.37.3 \u3010Sub Switch\u3011<\/h5>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-312.png\" \/><\/p>\n<p>Figure 376\u3010SQL Query Table\u3011\u3010Sub Switch\u3011Setting Page<\/p>\n<p>Table 243\u3010SQL Query Table\u3011\u3010Sub Switch\u3011Properties Setting<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Sub Switch\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Auto Scroll\u3011<\/p>\n<p>Turn on\/off the auto scrolling, this is a reverse switch.<\/p>\n<p>If is turned on, the table will automatically scroll to the row selection position of the SQL query.<\/p>\n<p>On the contrary, the form will not automatically scroll.<\/p>\n<p>\u3010Filter\u3011<\/p>\n<p>The displayed data can be filtered out based on fields and keywords<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-313.png\" \/><\/p>\n<p>\u3010Tune Width\u3011<\/p>\n<p>Automatically adjust the width of the fields in the table<\/p>\n<p>\u3010Page Up\u3011<\/p>\n<p>The Read command of SQL query will only read 1000 data from the database at a time, and after pressing it, the first 1000 data will be read<\/p>\n<p>\u3010Page Down\u3011<\/p>\n<p>The Read command of the SQL query only reads 1000 data from the database at a time, and after pressing it, the next 1000 data will be read.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h4>19.4.38 \u3010VNC Viewer Display\u3011<\/h4>\n<h5>19.4.38.1 \u3010Setting\u3011<\/h5>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-314.png\" \/><\/p>\n<p>Figure 377\u3010VNC Viewer Display\u3011setting paging<\/p>\n<p>Table 244\u3010VNC Viewer Display\u3011property setting<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Name\u3011<\/strong><\/p>\n<\/td>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Value (16-bit UINT)<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Definition<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>0<\/p>\n<\/td>\n<td>\n<p>None<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>1<\/p>\n<\/td>\n<td>\n<p>Play<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>2<\/p>\n<\/td>\n<td>\n<p>Stop playback<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Host(IP or Donmain Name)\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the IP address or domain name of the VNC server to connect to.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Port\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the connection port. The default value is 5900.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Password\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the password required to connect to the server.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Color Level\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the display color level of the VNC viewer. Available options are Full, 256 Colors, 64 Colors, and 8 Colors.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Auto Connect\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>When enabled, the system will automatically connect using the settings defined in Basic when the project starts.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Reconnect\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>When enabled, the system will attempt to reconnect if the connection to the server is lost.<br \/>Note: If the connection is terminated through the \u3010Control Address\u3011, the system will not attempt to reconnect.<\/p>\n<p>\u3010Interval\u3011<br \/>Defines how long the system waits before attempting to reconnect after a disconnection. The minimum interval is 5 seconds.<\/p>\n<p>\u3010Times\u3011<br \/>Defines the maximum number of reconnection attempts. Setting the value to -1 means unlimited attempts.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Enable Status Address\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Use a register to display the connection status.<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Value (16-bit UINT)<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Definition<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>0<\/p>\n<\/td>\n<td>\n<p>Disable<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>1<\/p>\n<\/td>\n<td>\n<p>Connected<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>2<\/p>\n<\/td>\n<td>\n<p>Disconnected<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>-1<\/p>\n<\/td>\n<td>\n<p>Error<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Enable Control Address\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Use registers to dynamically control the viewer functions.<\/p>\n<p>\u3010Connection\u3011<\/p>\n<p>Use numeric values to control the viewer state.<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Value (16-bit UINT)<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Definition<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>0<\/p>\n<\/td>\n<td>\n<p>None<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>1<\/p>\n<\/td>\n<td>\n<p>Connected<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>2<\/p>\n<\/td>\n<td>\n<p>Disconnected<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>3<\/p>\n<\/td>\n<td>\n<p>Update<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>\u203bDynamic Update Procedure:<\/p>\n<ol>\n<li>Set the address to 1 to disconnect.<\/li>\n<li>Modify the Host, Port, and Password values.<\/li>\n<li>Set the address to 3 to update the configuration.<\/li>\n<li>Then set the address to 2 to establish a new connection.<\/li>\n<\/ol>\n<p>\u3010Host(IP or Donmain Name)\u3011Enter the server connection information in a register. The data type must be ASCII.<\/p>\n<p>\u3010Port\u3011Enter the connection port in a register. The data type must be 16-bit UINT.<\/p>\n<p>\u3010Password\u3011Enter the server password in a register. The data type must be ASCII.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h4>19.4.39 \u30102D Drawing Graph\u3011<\/h4>\n<p>This function must be used together with the \u3010Recipe\u3011 feature.<br \/>Users can sequentially configure curve objects for multiple Master point along a path.<br \/>Each newly added Master point corresponds to a new recipe entry.<\/p>\n<p>The recipe parameters must follow a fixed format, as described below.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-315.png\" \/><\/p>\n<p>Figure 378\u30102D Drawing Graph-Recipe\u3011setting paging<\/p>\n<p>Table 245\u30102D Drawing Graph-Recipe\u3011property setting<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>No.<\/strong><\/p>\n<\/td>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>Index number<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>X<\/strong><\/p>\n<\/td>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>X coordinate of the point<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Y<\/strong><\/p>\n<\/td>\n<td>\n<p>Y coordinate of the point<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Z<\/strong><\/p>\n<\/td>\n<td>\n<p>Z coordinate of the point<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Type<\/strong><\/p>\n<\/td>\n<td>\n<p>Point type<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Value (16-bit UINT)<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Definition<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>0<\/p>\n<\/td>\n<td>\n<p>Line<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>1<\/p>\n<\/td>\n<td>\n<p>Arc (Through Point)<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>2<\/p>\n<\/td>\n<td>\n<p>Arc (Center) Clockwise<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>3<\/p>\n<\/td>\n<td>\n<p>Arc (Center) Counterclockwise<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>4<\/p>\n<\/td>\n<td>\n<p>Arc (Radius) Clockwise<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>5<\/p>\n<\/td>\n<td>\n<p>Arc (Radius) Counterclockwise<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>ArcX<\/strong><\/p>\n<\/td>\n<td>\n<p>Arc Parameter 1<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Value (16-bit UINT)<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Definition<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>0<\/p>\n<\/td>\n<td>\n<p>&#8211;<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>1<\/p>\n<\/td>\n<td>\n<p>Through Point X<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>2<\/p>\n<\/td>\n<td>\n<p>Center X<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>3<\/p>\n<\/td>\n<td>\n<p>Center X<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>4<\/p>\n<\/td>\n<td>\n<p>Radius<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>5<\/p>\n<\/td>\n<td>\n<p>Radius<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>ArcY<\/strong><\/p>\n<\/td>\n<td>\n<p>Arc Parameter 2<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Value (16-bit UINT)<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Definition<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>0<\/p>\n<\/td>\n<td>\n<p>&#8211;<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>1<\/p>\n<\/td>\n<td>\n<p>Through Point Y<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>2<\/p>\n<\/td>\n<td>\n<p>Center Y<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>3<\/p>\n<\/td>\n<td>\n<p>Center Y<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>4<\/p>\n<\/td>\n<td>\n<p>&#8211;<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>5<\/p>\n<\/td>\n<td>\n<p>&#8211;<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>ArcZ<\/strong><\/p>\n<\/td>\n<td>\n<p>Arc Parameter 3<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>ArcR<\/strong><\/p>\n<\/td>\n<td>\n<p>Arc Parameter 4<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>C1<\/strong><\/p>\n<\/td>\n<td>\n<p>Custom Parameter 1<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>C2<\/strong><\/p>\n<\/td>\n<td>\n<p>Custom Parameter 2<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>C3<\/strong><\/p>\n<\/td>\n<td>\n<p>Custom Parameter 3<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>C4<\/strong><\/p>\n<\/td>\n<td>\n<p>Custom Parameter 4<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>C5<\/strong><\/p>\n<\/td>\n<td>\n<p>Custom Parameter 5<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.39.1 \u3010General\u3011<\/h5>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-316.png\" \/><\/p>\n<p>Figure 379\u30102D Drawing Graph-Recipe\u3011\u3010Gerneral\u3011setting paging<\/p>\n<p>Table 246\u30102D Drawing Graph-Recipe\u3011\u3010Gerneral\u3011property setting<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>No. of Data<\/strong><\/p>\n<\/td>\n<td>\n<p>Defines the maximum number of Master point.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Recipe Group<\/strong><\/p>\n<\/td>\n<td>\n<p>If recipe groups have been created in the Recipe Configuration, their ID and name will appear here.<br \/>A recipe group must be selected before pressing \u3010OK\u3011.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Data Type<\/strong><\/p>\n<\/td>\n<td>\n<p>Defines the data type of the Master point data.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Start Point<\/strong><\/p>\n<\/td>\n<td>\n<p>If the \u3010Address\u3011 option is checked, the start point can be dynamically controlled through a register.<br \/>After modifying the value, press \u3010Update\u3011 to refresh the curve.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Recipe Count<\/strong><\/p>\n<\/td>\n<td>\n<p>Defines the register address used to display the number of created recipes.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Offset<\/strong><\/p>\n<\/td>\n<td>\n<p>Defines the offset value of the path line.<br \/>If \u3010Address\u3011 is enabled, the offset can be dynamically controlled through a register.<br \/>After modification, press \u3010Offset\u3011 to update the curve.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Current Section<\/strong><\/p>\n<\/td>\n<td>\n<p>Displays the current X and Y coordinates and indicates whether the current position is a Master point.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Global Display Range<\/strong><\/p>\n<\/td>\n<td>\n<p>Defines the displayable range by setting the maximum and minimum values for the X and Y axes.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Line\/Arc Details<\/strong><\/p>\n<\/td>\n<td>\n<p>Defines whether detailed information about Master point should be displayed on the 2D drawing object, including : Length, Angle, Radius, Coordinates<\/p>\n<p>Registers can also be configured to store these values.<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Field<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Show<\/strong><\/p>\n<\/td>\n<td>\n<p>Enable display of length, angle, radius, and coordinates<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Display Precision<\/strong><\/p>\n<\/td>\n<td>\n<p>Number of decimal places to display<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Start Address<\/strong><\/p>\n<\/td>\n<td>\n<p>Starting register address for storing detailed data<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>No. of Data<\/strong><\/p>\n<\/td>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>Amount of register data to store (register length)<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Trigger Bit<\/strong><\/p>\n<\/td>\n<td>\n<p>Bit used to trigger updating of stored data<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>DXF<\/strong><\/p>\n<\/td>\n<td>\n<p>Defines the DXF file name to load and the register address storing the loading result.<\/p>\n<p>Result Address Definition :<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Value (16-bit UINT)<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Definition<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>0<\/p>\n<\/td>\n<td>\n<p>Successful<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>1<\/p>\n<\/td>\n<td>\n<p>Loading<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>2<\/p>\n<\/td>\n<td>\n<p>Failed<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.39.2 \u3010Advanced\u3011<\/h5>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-317.png\" \/><\/p>\n<p>Figure 380\u30102D Drawing Graph-Recipe\u3011\u3010Advanced\u3011Setting Page<\/p>\n<p>Table 247\u30102D Drawing Graph-Recipe\u3011\u3010Advanced\u3011Properties Setting<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Register Control<\/strong><\/p>\n<\/td>\n<td>\n<p>When enabled,\u3010Action Trigger Bit\u3011and\u3010Action Word\u3011can be configured.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Remove<\/strong><\/p>\n<\/td>\n<td>\n<p>Must be used with sub switch.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Append File<\/strong><\/p>\n<\/td>\n<td>\n<p>Must be used with sub switch.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Shift<\/strong><\/p>\n<\/td>\n<td>\n<p>Must be used with sub switch.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.39.3 \u3010Sub Switch\u3011<\/h5>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-318.png\" \/><\/p>\n<p>Figure 381\u30102D Drawing Graph-Recipe\u3011\u3010Sub Switch\u3011Setting Page<\/p>\n<p>Table 248\u30102D Drawing Graph-Recipe\u3011\u3010Sub Switch\u3011Properties Setting<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Master Point<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Auto Scroll\u3011<\/p>\n<p>Turn on\/off the auto scrolling, this is a reverse switch.<\/p>\n<p>If is turned on, the table will automatically scroll to the row selection position of the SQL query.<\/p>\n<p>On the contrary, the form will not automatically scroll.<\/p>\n<p>Set the current position as a Master point.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Master Point Up Cursor<\/strong><\/p>\n<\/td>\n<td>\n<p>Move the cursor to the previous Master point.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Master Point Down Cursor<\/strong><\/p>\n<\/td>\n<td>\n<p>Move the cursor to the next Master point.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Type Selection<\/strong><\/p>\n<\/td>\n<td>\n<p>Switch the line type between : Line, Arc (Through Point), Arc (Center) Clockwise, Arc (Center) Counterclockwise, Arc (Radius) Clockwise, <\/p>\n<p>Arc (Radius) Counterclockwise<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Insert<\/strong><\/p>\n<\/td>\n<td>\n<p>Insert a Master point after the current Master point.<br \/>Master point can be inserted between existing points.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Edit<\/strong><\/p>\n<\/td>\n<td>\n<p>Modify the data of the current Master point.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Remove<\/strong><\/p>\n<\/td>\n<td>\n<p>Remove Master point. The removal mode can be configured in the Advanced page.<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Mode<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Current Point<\/strong><\/p>\n<\/td>\n<td>\n<p>Remove the current Master point<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Points After Current<\/strong><\/p>\n<\/td>\n<td>\n<p>Remove multiple Master point after the current one<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Points Before Current<\/strong><\/p>\n<\/td>\n<td>\n<p>Remove multiple Master point before the current one<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Range<\/strong><\/p>\n<\/td>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>Remove Master point within a specified range<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Clear<\/strong><\/p>\n<\/td>\n<td>\n<p>Remove all Master point.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Update<\/strong><\/p>\n<\/td>\n<td>\n<p>Update all Master point based on the recipe group data.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>DXF<\/strong><\/p>\n<\/td>\n<td>\n<p>Load a DXF file into the 2D drawing object and the selected recipe group.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Hor. Zoom In<\/strong><\/p>\n<\/td>\n<td>\n<p>Zoom in horizontally<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Hor. Zoom Out<\/strong><\/p>\n<\/td>\n<td>\n<p>Zoom out horizontally<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Ver. Zoom In<\/strong><\/p>\n<\/td>\n<td>\n<p>Zoom in vertically<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Ver. Zoom Out<\/strong><\/p>\n<\/td>\n<td>\n<p>Zoom out vertically<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Export<\/strong><\/p>\n<\/td>\n<td>\n<p>Export all Master point to a file.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Append<\/strong><\/p>\n<\/td>\n<td>\n<p>Append file data into the 2D drawing editor.<\/p>\n<p>The appended data will start from the current recipe number.<br \/>If data already exists at the append location, it will be overwritten.<\/p>\n<p>This function requires configuration in the\u3010Advanced\u3011 \u2192 \u3010Append File\u3011settings.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-319.png\" \/><\/p>\n<p>The starting point of appended data can be defined separately for X and Y.<\/p>\n<p>Available modes:<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Mode<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Constant<\/strong><\/p>\n<\/td>\n<td>\n<p>Use a constant value as the starting point<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Address<\/strong><\/p>\n<\/td>\n<td>\n<p>Read the starting point value from a register<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Last Point<\/strong><\/p>\n<\/td>\n<td>\n<p>Use the current last point as the starting point<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Shift<\/strong><\/p>\n<\/td>\n<td>\n<p>Allows batch translation of Master point.<br \/>This function must be enabled in the\u3010Advanced\u3011 \u2192 \u3010Offset\u3011setting.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-320.png\" \/><\/p>\n<p>The \u3010Mode\u3011is explained as follows:<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Mode<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Constant<\/strong><\/p>\n<\/td>\n<td>\n<p>Use a constant value as the starting point<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Address<\/strong><\/p>\n<\/td>\n<td>\n<p>Read the starting point value from a register<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Last Point<\/strong><\/p>\n<\/td>\n<td>\n<p>Use the current last point as the starting point<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>\u3010Offset\u3011X, Y, and Z are used to set the translation amount, and the values \u200b\u200bwill be determined according to the data type settings.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Offset<\/strong><\/p>\n<\/td>\n<td>\n<p>Apply path offset based on the\u3010Offset\u3011value defined in the\u3010General\u3011settings.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h4>19.4.40 \u3010Parison Graph\u3011<\/h4>\n<p>The\u3010Parison Graph\u3011is an object used to edit \u3010interpolation curves\u3011.<br \/>In this editor : The X-axis represents the value (index) and the the Y-axis represents the data amount.<\/p>\n<p>Its main functions are as follows:<\/p>\n<ul>\n<li>Modify the index and value in the Current Section to adjust the curve displayed in the Profile Editor.<\/li>\n<li>Use sub switch to set\/cancel Master point, switch interpolation types, clear data, or load interpolation results into the editor to edit the interpolation curve data.<\/li>\n<li>Provide a reference line to compare the difference between the interpolation curve and actual values. The reference line can be used in comparison mode, or enabled in normal mode through a reference line address. The data can be inserted into the Profile Editor using the Insert\/Update Reference Line sub switch.<\/li>\n<\/ul>\n<p>Notice : <\/p>\n<ol>\n<li>The first and last points of the interpolation curve are always Master point and cannot be canceled.<\/li>\n<li>After switching pages, the curve in the editor will be cleared automatically. You must use the sub switch to reload the data.<\/li>\n<li>This function is only available on P5 \/ U7 \/ FvRT models with software version V1.6.60 or later.<\/li>\n<\/ol>\n<h5>19.4.40.1 \u3010General\u3011<\/h5>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-321.png\" \/><\/p>\n<p>Figure 382\u3010Parison Graph\u3011\u3010General\u3011setting paging<\/p>\n<p>Table 249\u3010Parison Graph\u3011\u3010General\u3011property setting<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Basic\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Mode\u3011<\/p>\n<p>Defines the operating mode of the\u3010Parison Graph\u3011.<\/p>\n<p>Available modes:<\/p>\n<ul>\n<li>\u3010Normal Mode\u3011\n<ul>\n<li>Allows setting Master point and values.<\/li>\n<li>Data can be written to the specified address.<\/li>\n<\/ul>\n<\/li>\n<li>\u3010Comparing Mode\u3011\n<ul>\n<li>Only allows reading values back into the editor or loading a reference line using sub switch.<\/li>\n<li>Editing or writing data is not allowed.<\/li>\n<\/ul>\n<\/li>\n<\/ul>\n<p>\u3010No. of Data\u3011<\/p>\n<p>Defines the number of data points in the curve.<br \/>Range: <strong>100 ~ 1000<\/strong><\/p>\n<p>\u3010Data Type\u3011<\/p>\n<p>Defines the data type used for the curve values.<\/p>\n<p>\u3010Interpolation Type\u3011<\/p>\n<p>Defines the interpolation method used by the object.<\/p>\n<p>Available options : \u3010Linear\u3011, \u3010S-Curve\u3011.<\/p>\n<p>During runtime, the interpolation type can be switched using the\u3010Interpolation Selection\u3011sub switch.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Interpolation Result\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Interpolation Curve\u3011<\/p>\n<p>Defines the starting address used to store the X values of the curve. Press the \u3010Output to PLC\u3011 sub switch to write the curve data to this address.<\/p>\n<p>\u3010Mater Points Indication\u3011<\/p>\n<p>Defines whether each Y-axis control point is a Master point.<\/p>\n<p>The result is stored in individual bits : 1 = Master point, 0 = Not a Master point<\/p>\n<p>Press the\u3010Output to PLC\u3011sub switch to store the data at this address. In Comparison Mode, this option can be enabled if required.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Ref. Curve\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>The\u3010Ref. Curve\u3011is displayed on top of the current curve for comparison.<\/p>\n<p>Use the\u3010Insert \/ Update Ref. Curve\u3011 sub switch to load the\u3010Ref. Curve\u3011into the editor.<\/p>\n<p>In Normal Mode, this option can be enabled if required.<\/p>\n<p><strong>Noteice : <\/strong>Once a\u3010Ref. Curve\u3011is loaded, it cannot be removed from the screen.<br \/>It can only be cleared by changing the page or pressing the Clear sub switch.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Current Section\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Allows direct reading or modification of the index and value of the current point via registers.<\/p>\n<p>Inside the\u3010Parison Graph\u3011, the currently selected point is indicated by a blue cursor and master points are marked in green. Values will only update in the editor when the selected point is a master point.<\/p>\n<p>\u3010Index\u3011Register address of the selected point index.<\/p>\n<p>\u3010Value\u3011Register address of the selected point value.<\/p>\n<p>\u3010Master Point\u3011Displays or sets whether the current point is a Master point (1 = yes, 0 = no).<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Global Display Range\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Defines the display range of the X-axis.<\/p>\n<p>\u3010Min\u3011Minimum value of the X-axis display range.<\/p>\n<p>\u3010Max\u3011Maximum value of the X-axis display range.<\/p>\n<p>\u3010Display Precision\u3011Number of decimal places displayed.<\/p>\n<p><strong>Note:<\/strong><br \/><strong>The\u3010Global Display Range\u3011defines the visible range only.<br \/>For example : \u3010Max\u3011 = 100, \u3010Min\u3011 = 0, and <\/strong><\/p>\n<p><strong>values outside this range will not be displayed.<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Border\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Type\u3011<\/p>\n<p>Set border type.<\/p>\n<p>\u3010Color\/Width\u3011<\/p>\n<p>Set the color and width of the border.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.40.2 \u3010Advanced\u3011<\/h5>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-322.png\" \/><\/p>\n<p>Figure 383\u3010Parison Graph\u3011\u3010Advanced\u3011Setting Page<\/p>\n<p>Table 250\u3010Parison Graph\u3011\u3010Advanced\u3011Properties Setting<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Register Control\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Enable this option to allow the editor actions to be controlled through registers.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Action Trigger Bit\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Defines the bit used to trigger the action specified in the\u3010Action Word\u3011.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Action Word\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Defines the action to be executed via a register. The actions correspond to the\u3010Sub Switch\u3011. For detailed descriptions, please refer to the next section.<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Value (16-bit UINT)<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Definition<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>0<\/p>\n<\/td>\n<td>\n<p>Master Point<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>1<\/p>\n<\/td>\n<td>\n<p>Master Point Up Cursor<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>2<\/p>\n<\/td>\n<td>\n<p>Master Point Down Cursor<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>3<\/p>\n<\/td>\n<td>\n<p>Interpolation Selection<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>4<\/p>\n<\/td>\n<td>\n<p>Clear<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>5<\/p>\n<\/td>\n<td>\n<p>Output to PLC<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>6<\/p>\n<\/td>\n<td>\n<p>Insert \/ Update Ref. Curve<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>7<\/p>\n<\/td>\n<td>\n<p>Input interpolation to Parison<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Action Result\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Displays the execution result.<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Value (16-bit UINT)<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Definition<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>0<\/p>\n<\/td>\n<td>\n<p>No error.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>1<\/p>\n<\/td>\n<td>\n<p>Not support in current mode.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>2<\/p>\n<\/td>\n<td>\n<p>Ref. Curve address is not enable<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>3<\/p>\n<\/td>\n<td>\n<p>Master Point Address is not enable<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>\u3010Reset Action Trigger Bit\u3011<\/strong><\/p>\n<\/td>\n<td>\n<p>Enable this option to automatically reset the\u3010Action Trigger Bit\u3011to zero after it is triggered.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h5>19.4.40.3 \u3010Sub Switch\u3011<\/h5>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-323.png\" \/><\/p>\n<p>Figure 384\u3010Parison Graph\u3011\u3010Sub Switch\u3011Setting Page<\/p>\n<p>Table 251\u3010Parison Graph\u3011\u3010Sub Switch\u3011Properties Setting<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Mater Point<\/strong><\/p>\n<\/td>\n<td>\n<p>\u3010Auto Scroll\u3011<\/p>\n<p>Set or cancel the Master point at the current index position.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Master Point Up Cursor<\/strong><\/p>\n<\/td>\n<td>\n<p>Move the cursor to the previous Master point.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Master Point Down Cursor<\/strong><\/p>\n<\/td>\n<td>\n<p>Move the cursor to the next Master point.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Interpolation Selection<\/strong><\/p>\n<\/td>\n<td>\n<p>Switch between Polyline and Curve.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Clear<\/strong><\/p>\n<\/td>\n<td>\n<p>Clear all data displayed in the\u3010Parison Graph\u3011.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Output to PLC<\/strong><\/p>\n<\/td>\n<td>\n<p>Output the planned curve from the\u3010Parison Graph\u3011to the address specified in\u3010Interpolation Curve\u3011.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Insert \/ Update Ref. Curve<\/strong><\/p>\n<\/td>\n<td>\n<p>When the reference line function is enabled, this switch reads the reference line into the\u3010Parison Graph\u3011.<\/p>\n<p><strong>Notice : Once loaded, the reference line cannot be removed except by changing pages or pressing\u3010Clear\u3011.<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Input interpolation to Parison<\/strong><\/p>\n<\/td>\n<td>\n<p>Read the\u3010Interpolation Curve\u3011from the\u3010Interpolation Result\u3011address back into the \u3010Parison Graph\u3011.<\/p>\n<p><strong>Notice : The first and last master point bits in the\u3010Interpolation Result\u3011 address must be ON, otherwise the data reading will fail.<\/strong><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h4>19.4.41 \u3010Signboard Cutting\u3011<\/h4>\n<p>This is a 2D drawing object designed for special applications. By importing a DXF file that contains the outline of a signboard graphic, and after configuring the required parameters, the system can output all cutting positions on the signboard.<\/p>\n<h5>19.4.41.1 \u3010General\u3011<\/h5>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/p5hmi-fvd-en-19\/p5hmi-fvd-en-19-324.png\" \/><\/p>\n<p>Figure 385\u3010Signboard Cutting\u3011\u3010General\u3011setting paging<\/p>\n<p>Table 252\u3010Signboard Cutting\u3011\u3010General\u3011property setting<\/p>\n<p>\u203bNotice : Except for the\u3010Signboard Cutting\u3011section, all other settings are the same as the\u30102D Drawing Graph-Recipe\u3011. Therefore, duplicated settings will not be described here.<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Property<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Description<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Inport Graphic<\/strong><\/p>\n<\/td>\n<td>\n<p>Select whether the imported shape represents the outer contour or the inner contour of the signboard.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Trigger Bit<\/strong><\/p>\n<\/td>\n<td>\n<p>Select a Bit address used to trigger the operation.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Cutter Thickness<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the thickness of the cutting blade used for signboard cutting.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Material Thickness<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the thickness of the signboard material.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Max Cutting Interval<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the maximum interval between cutting points.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Min Cutting Interval<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the minimum interval between cutting points.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Connector Length<\/strong><\/p>\n<\/td>\n<td>\n<p>Set the joint length of the signboard.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Output Results<\/strong><\/p>\n<\/td>\n<td>\n<p>After the trigger bit is activated, the calculated signboard cutting data will be stored at this address.<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Value (16-bit UINT)<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Definition<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>0<\/p>\n<\/td>\n<td>\n<p>Mater Point<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>1<\/p>\n<\/td>\n<td>\n<p>Previous Mater Point (Cursor).<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>2~n<\/p>\n<\/td>\n<td>\n<p>Next Master Point (Cursor).<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>Trigger Results<\/strong><\/p>\n<\/td>\n<td>\n<p>After the trigger bit is activated, the execution result will be displayed here.<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>Value (16-bit UINT)<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>Definition<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>0<\/p>\n<\/td>\n<td>\n<p>Mater Point<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>1<\/p>\n<\/td>\n<td>\n<p>Previous Mater Point (Cursor).<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>2<\/p>\n<\/td>\n<td>\n<p>Next Master Point (Cursor).<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n","protected":false},"excerpt":{"rendered":"<p>FvDesigner provides plenty of objects for users, the fo [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[57],"tags":[],"class_list":["post-3361","post","type-post","status-publish","format-standard","hentry","category-en-p5hmi-fvd"],"_links":{"self":[{"href":"https:\/\/resource.fatek.com\/index.php\/wp-json\/wp\/v2\/posts\/3361","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/resource.fatek.com\/index.php\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/resource.fatek.com\/index.php\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/resource.fatek.com\/index.php\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/resource.fatek.com\/index.php\/wp-json\/wp\/v2\/comments?post=3361"}],"version-history":[{"count":0,"href":"https:\/\/resource.fatek.com\/index.php\/wp-json\/wp\/v2\/posts\/3361\/revisions"}],"wp:attachment":[{"href":"https:\/\/resource.fatek.com\/index.php\/wp-json\/wp\/v2\/media?parent=3361"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/resource.fatek.com\/index.php\/wp-json\/wp\/v2\/categories?post=3361"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/resource.fatek.com\/index.php\/wp-json\/wp\/v2\/tags?post=3361"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}