{"id":3412,"date":"2026-11-17T21:34:24","date_gmt":"2026-11-17T13:34:24","guid":{"rendered":"https:\/\/resource.fatek.com\/index.php\/2026\/11\/17\/fbs-hw-en-006\/"},"modified":"2026-11-17T21:34:24","modified_gmt":"2026-11-17T13:34:24","slug":"fbs-hw-en-006","status":"publish","type":"post","link":"https:\/\/resource.fatek.com\/index.php\/2026\/11\/17\/fbs-hw-en-006\/","title":{"rendered":"Chapter 6 Digital Input (DI) Circuit"},"content":{"rendered":"<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-006\/fbs-hw-en-006-001.png\" \/><\/p>\n<p>The FBS-PLC provides the ultra high speed differential double end 5VDC inputs (i.e., single input with two terminals without common) and the single-end 24VDC inputs which use the common terminal to save terminals. The response speeds of single-end common input circuits are available in high, medium and low. Because the double end input circuit has two independent terminals, it can be connected either in SINK or SOURCE for input or in differential input wiring for line driver source. The single-end input circuit can be set to SINK or SOURCE type by varying the wiring of the common terminals S\/S inside PLC and external common wire of input circuits (see Sec. 6.3 for details). <\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>6.1Specifications of Digital Input (DI) Circuit <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td rowspan=\"2\">\n<p> Item <\/p>\n<\/td>\n<td>\n<p>5VDC <\/p>\n<\/td>\n<td rowspan=\"4\">\n<p>High Speed <\/p>\n<\/td>\n<td colspan=\"2\" rowspan=\"2\">\n<p>24VDC Single-end Input <\/p>\n<\/td>\n<td rowspan=\"5\">\n<p>Mid\/Low Speed <\/p>\n<\/td>\n<td rowspan=\"5\">\n<p>Low Speed<\/p>\n<\/td>\n<td rowspan=\"7\">\n<p>Note <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Differential <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"3\">\n<p>Specifications <\/p>\n<\/td>\n<td>\n<p>Input <\/p>\n<\/td>\n<td colspan=\"2\" rowspan=\"3\">\n<p>Medium Speed(HSC) <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Ultra High <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Speed(HSC) <\/p>\n<\/td>\n<td>\n<p>(HSC) <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Maximum input <\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>920KHz <\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>200KHz <\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>20KHz (HHSC)<\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>Total 5KHz (SHSC)<\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>1 0.47 mS*<\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>4.7 mS <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>frequency*\/ <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>accumulated time <\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td colspan=\"2\">\n<p>Input Signal Voltage <\/p>\n<\/td>\n<td colspan=\"6\">\n<p>5VDC\u00b110% <\/p>\n<\/td>\n<td colspan=\"4\">\n<p>24VDC\u00b110% <\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>*: Half of <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"3\">\n<p>Input <br \/>Current <br \/>Threshold <\/p>\n<\/td>\n<td rowspan=\"3\">\n<p>ON <br \/>Current OFF <br \/>Current <\/p>\n<\/td>\n<td>\n<p>\uff1e11 mA <\/p>\n<\/td>\n<td colspan=\"5\">\n<p>\uff1e8 mA <\/p>\n<\/td>\n<td colspan=\"2\">\n<p>\uff1e4mA <\/p>\n<\/td>\n<td colspan=\"2\">\n<p>\uff1e2.3mA <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"6\" rowspan=\"2\">\n<p>\uff1c2 mA <\/p>\n<\/td>\n<td colspan=\"2\" rowspan=\"2\">\n<p>\uff1c1.5mA <\/p>\n<\/td>\n<td colspan=\"2\" rowspan=\"2\">\n<p>\uff1c0.9mA <\/p>\n<\/td>\n<td>\n<p>maximum <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>frequency while <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"2\">\n<p>Maximum Input <\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>20mA <\/p>\n<\/td>\n<td colspan=\"5\" rowspan=\"2\">\n<p>10.5mA <\/p>\n<\/td>\n<td colspan=\"2\" rowspan=\"2\">\n<p>7.6mA <\/p>\n<\/td>\n<td colspan=\"2\" rowspan=\"2\">\n<p>4.5 mA <\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>A\/B phase input<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"2\">\n<p>current <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"2\">\n<p>Input Status <\/p>\n<\/td>\n<td colspan=\"10\" rowspan=\"2\">\n<p>Displayed by LED: Lit when \u201cON\u201d, dark when \u201cOFF\u201d <\/p>\n<\/td>\n<td rowspan=\"17\">\n<p>* 1\uff1aLimit of input <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"2\" rowspan=\"2\">\n<p>Indication <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"10\" rowspan=\"2\">\n<p>Photocoupler signal isolation <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"2\">\n<p>Isolation Type <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"2\">\n<p>SINK\/SOURCE <\/p>\n<\/td>\n<td colspan=\"2\" rowspan=\"2\">\n<p>Independent Wiring <\/p>\n<\/td>\n<td colspan=\"8\" rowspan=\"2\">\n<p>Via variation of internal common terminal S\/S and external common wiring <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"2\">\n<p>Wiring <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"2\">\n<p>FBS-20MNR\/T\/J <\/p>\n<\/td>\n<td>\n<p>X0,1 <\/p>\n<\/td>\n<td colspan=\"5\">\n<p>X4, 5, 8, 9 <\/p>\n<\/td>\n<td colspan=\"4\">\n<p>X2,3,6,7,10,11 <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"2\" rowspan=\"2\">\n<p>FBS-32MNR\/T\/J <\/p>\n<\/td>\n<td>\n<p>X0,1,4,5 <\/p>\n<\/td>\n<td colspan=\"5\">\n<p>X8, 9, 12, 13 <\/p>\n<\/td>\n<td colspan=\"2\">\n<p>X2,3,6,7,10,11,14,15 <\/p>\n<\/td>\n<td colspan=\"2\">\n<p>X16~19 <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"6\" rowspan=\"2\">\n<p>X0,1,4,5,8,9,<\/p>\n<\/td>\n<td colspan=\"2\" rowspan=\"4\">\n<p>X2,3,6,7,10,11,14,15 <\/p>\n<\/td>\n<td colspan=\"2\" rowspan=\"4\">\n<p>X16~27 <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"2\" rowspan=\"2\">\n<p>FBS-44MNR\/T\/J <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"6\" rowspan=\"2\">\n<p>12,13 <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"2\" rowspan=\"2\">\n<p>FBS-10MCR\/T\/J <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"3\">\n<p>X0,1 <\/p>\n<\/td>\n<td colspan=\"3\">\n<p>X4,5 <\/p>\n<\/td>\n<td colspan=\"4\">\n<p>X2,3 <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"2\">\n<p>FBS-14MCR\/T\/J <\/p>\n<\/td>\n<td colspan=\"3\">\n<p>X0,1 <\/p>\n<\/td>\n<td colspan=\"3\">\n<p>X4,5 <\/p>\n<\/td>\n<td colspan=\"4\">\n<p>X2,3,6,7 <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"2\">\n<p>FBS-20MCR\/T\/J <\/p>\n<\/td>\n<td colspan=\"4\">\n<p>X0,1,4,5 <\/p>\n<\/td>\n<td colspan=\"2\">\n<p>X8,9 <\/p>\n<\/td>\n<td colspan=\"4\">\n<p>X2,3,6,7,10,11 <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"2\">\n<p>FBS-24MCR\/T\/J <\/p>\n<\/td>\n<td colspan=\"4\">\n<p>X0,1,4,5 <\/p>\n<\/td>\n<td colspan=\"2\">\n<p>X8,9.12,13 <\/p>\n<\/td>\n<td colspan=\"4\">\n<p>X2,3,6,7,10,11 <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"2\">\n<p>FBS-32MCR\/T\/J <\/p>\n<\/td>\n<td colspan=\"5\">\n<p>X0,1,4,5,8,9 <\/p>\n<\/td>\n<td>\n<p>X12,13 <\/p>\n<\/td>\n<td colspan=\"2\">\n<p>X2,3,6,7,10,11,14,15 <\/p>\n<\/td>\n<td colspan=\"2\">\n<p>X16~19 <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"2\" rowspan=\"2\">\n<p>FBS-40MCR\/T\/J <\/p>\n<\/td>\n<td colspan=\"5\" rowspan=\"2\">\n<p>X0,1,4,5,8,9 <\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>X12,13 <\/p>\n<\/td>\n<td colspan=\"2\" rowspan=\"2\">\n<p>X2,3,6,7,10,11,14,15 <\/p>\n<\/td>\n<td colspan=\"2\" rowspan=\"2\">\n<p>X16~23 <\/p>\n<\/td>\n<td>\n<p>speed in MA<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>model is <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"2\" rowspan=\"2\">\n<p>FBS-60MCR\/T\/J <\/p>\n<\/td>\n<td colspan=\"6\" rowspan=\"2\">\n<p>X0,1,4,5,8,9,12,13 <\/p>\n<\/td>\n<td colspan=\"2\" rowspan=\"2\">\n<p>X2,3,6,7,10,11,14,15 <\/p>\n<\/td>\n<td colspan=\"2\" rowspan=\"2\">\n<p>X16~35 <\/p>\n<\/td>\n<td>\n<p>10KHz <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"14\">\n<p>DHF\uff1aDigital <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"2\">\n<p>FBS-10MAR\/T\/J <\/p>\n<\/td>\n<td colspan=\"6\">\n<p>X0,1,4,5 <\/p>\n<\/td>\n<td colspan=\"4\">\n<p>X2,3 <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"2\">\n<p>FBS-14MAR\/T\/J <\/p>\n<\/td>\n<td colspan=\"6\">\n<p>X0,1,4,5 <\/p>\n<\/td>\n<td colspan=\"4\">\n<p>X2,3,6,7 <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"2\">\n<p>FBS-20MAR\/T\/J <\/p>\n<\/td>\n<td colspan=\"7\">\n<p>X0,1,4,5,8,9 <\/p>\n<\/td>\n<td colspan=\"3\">\n<p>X2,3,6,7,10,11 <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"2\">\n<p>FBS-24MAR\/T\/J <\/p>\n<\/td>\n<td colspan=\"10\">\n<p>X0,1,4,5,8,9,12,13X2,3,6,7,10,11 <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"2\">\n<p>FBS-32MAR\/T\/J <\/p>\n<\/td>\n<td colspan=\"8\">\n<p>X0,1,4,5,8,9,12,13X2,3,6,7,10,11,14,15 <\/p>\n<\/td>\n<td colspan=\"2\">\n<p>X16~19 <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"2\">\n<p>FBS-40MAR\/T\/J <\/p>\n<\/td>\n<td colspan=\"8\">\n<p>X0,1,4,5,8,9,12,13X2,3,6,7,10,11,14,15 <\/p>\n<\/td>\n<td colspan=\"2\">\n<p>X16~23 <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"2\">\n<p>FBS-60MAR\/T\/J <\/p>\n<\/td>\n<td colspan=\"8\" rowspan=\"2\">\n<p>X0,1,4,5,8,9,12,13X2,3,6,7,10,11,14,15 <\/p>\n<\/td>\n<td colspan=\"2\" rowspan=\"2\">\n<p>X16~35 <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"2\" rowspan=\"2\">\n<p>Expansion <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"10\" rowspan=\"2\">\n<p>All Input <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"2\" rowspan=\"2\">\n<p>Unit\/Module <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"10\" rowspan=\"2\">\n<p>Points <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"2\">\n<p>R\/T\/J <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"2\" rowspan=\"3\">\n<p>Noise Filtering Time <\/p>\n<\/td>\n<td colspan=\"6\" rowspan=\"3\">\n<p>DHF(0 ~ 15mS) <\/p>\n<\/td>\n<td colspan=\"2\" rowspan=\"3\">\n<p>DHF(0 ~ 15mS) <\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>DHF(0 ~ <\/p>\n<\/td>\n<td rowspan=\"6\">\n<p>AHF(4.7ms)<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"2\">\n<p>Hardware Filter <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"2\">\n<p>15mS) <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"2\" rowspan=\"3\">\n<p>\t3 <br \/>Constant*<\/p>\n<\/td>\n<td colspan=\"6\" rowspan=\"3\">\n<p>\uff0bAHF(0.47\u00b5s) <\/p>\n<\/td>\n<td colspan=\"2\" rowspan=\"3\">\n<p>\uff0bAHF(4.7\u00b5s) <\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>AHF\uff1aAnalog <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"2\">\n<p>\uff0bAHF(0.47\u00b5s) <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Hardware Filter <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-006\/fbs-hw-en-006-002.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-006\/fbs-hw-en-006-003.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-006\/fbs-hw-en-006-004.png\" \/><\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>6.2Structure and Wiring of 5VDC Ultra High Speed Differential Input Circuit <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>Only the MN main unit of FBs provides the 5VDC ultra high speed differential input circuit, which is mainly used for the input of hardware high speed counter (HHSC) with a maximum working frequency up to 920 KHz. In practice, to ensure the high speed and high noise immunity, please use Line-Driver for differential line driving. In environments with small noise and medium working frequency (\uff1c200KHz), however, it can be changed to the 5VDC single-end SINK or SOURCE input or to the 24VDC single-end SINK or SOURCE input by connecting a 3K\u2126\/0.5W resistor in series, as shown in the figure below. <\/p>\n<p>(A) \tWiring of 5VDC differential input for Line-Driver driving\uff08with frequency up to 920KHz for high speed and \tenvironments with large noise\uff09<\/p>\n<p>FBs-MN main unit \tExternal differential output <\/p>\n<p>A<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Dual-end input <\/p>\n<\/td>\n<td>\n<p>Twisted-pair <\/p>\n<\/td>\n<td>\n<p>(Encoder) Line-Driver\u8f38\u51fa<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>B<\/p>\n<p>(B) \tWiring of 5VDC differential input to 5VDC single SINK or SOURCE input <\/p>\n<p>FBS-MN main unit<\/p>\n<p>R1 <br \/>\tX0+<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>R2<\/p>\n<\/td>\n<td>\n<p>SINK input<\/p>\n<\/td>\n<td>\n<p>NPN<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>\tSENSOR <br \/>X0<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>R1<\/p>\n<\/td>\n<td>\n<p>5VDC<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>X1+<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td rowspan=\"2\">\n<p>R2<\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>\tSOURCE SOURCE\u8f38\u5165input <\/p>\n<\/td>\n<td>\n<p>PNP<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>SENSOR<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>X1<\/p>\n<p>(C) \tMethod of converting 5VDC differential input to 24VDC single-end SOURCE input <\/p>\n<p>FBS-MN\u4e3b\u6a5fFBs-MN main unit <\/p>\n<p>R1 <br \/>\tX0+<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td rowspan=\"2\">\n<p>R2<\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>SINK input SINK \u8f38\u5165<\/p>\n<\/td>\n<td>\n<p>NPN<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>SENSOR<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>\tX0 <br \/>\t\t3K\u03a9\/0.5W <br \/>R1:100\u03a9<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>R2:1.2K\u03a9<\/p>\n<\/td>\n<td>\n<p>R1<\/p>\n<\/td>\n<td>\n<p>3K\u03a9\/0.5W<\/p>\n<\/td>\n<td>\n<p> 24VDC<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>X1+<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td rowspan=\"3\">\n<p>R2<\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>SOURCE <\/p>\n<\/td>\n<td>\n<p>PNP<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"2\">\n<p>SENSOR<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>SOURCE\u8f38\u5165input <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>X1<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-006\/fbs-hw-en-006-005.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-006\/fbs-hw-en-006-006.png\" \/><\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>6.324VDC Single-End Input Circuit and Wiring for SINK\/SOURCE Input <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>The 24VDC single-end digital input circuits of FBS-PLC are available for high, medium and low speed. They all have the similar circuit structures but with different response speeds. To save input terminals, the circuit of single-end input is implemented by connecting one end of all input points (photo coupler) inside the PLC to the same internal common point labeled as S\/S. The other end of each input circuit is connected to corresponding terminals such as X0, X1, X2, etc. The S\/S common terminal and N single-end inputs comprise of N digital inputs (i.e., only N+1 terminals are used for N terminals). Therefore, we call this type of input structure the single-end input. The user also needs to do the same thing when making the connection of external digital input devices. Namely, the one end of all input devices (e.g., buttons, switches) are connected together and called the external common wire, while the other ends of input circuits are connected to the input terminals X0, X1, X2, etc., of PLC. Then finish it by connecting the external common wiring and internal common terminal S\/S to the positive\/negative terminals of the 24VDC power. When connect the internal common terminal S\/S to 24V+(positive) and the external common wire to 24V\uff0d (negative), then the circuit serve as SINK input. On the contrary, while exchange the wiring of the above internal and external common will serve as a SOURCE input. The above wiring schemes can illustrated below: <\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>z<\/p>\n<\/td>\n<td colspan=\"4\">\n<p>Wiring of single-end common SINK input <\/p>\n<\/td>\n<td rowspan=\"11\">\n<p>X0<\/p>\n<\/td>\n<td rowspan=\"11\">\n<p>R1<\/p>\n<\/td>\n<td rowspan=\"11\">\n<p>R2<\/p>\n<\/td>\n<td rowspan=\"11\">\n<p>X1<\/p>\n<\/td>\n<td rowspan=\"11\">\n<p>R1<\/p>\n<\/td>\n<td rowspan=\"11\">\n<p>R2<\/p>\n<\/td>\n<td rowspan=\"11\">\n<p>X2<\/p>\n<\/td>\n<td rowspan=\"11\">\n<p>R1<\/p>\n<\/td>\n<td rowspan=\"11\">\n<p>R2<\/p>\n<\/td>\n<td rowspan=\"11\">\n<p>X3<\/p>\n<\/td>\n<td rowspan=\"11\">\n<p>R1<\/p>\n<\/td>\n<td rowspan=\"11\">\n<p>\u8f38\u5165\u5143\u4ef6Input devices <\/p>\n<\/td>\n<td rowspan=\"6\">\n<p>Low speed <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"5\">\n<p>External Common Wiring\u5916\u90e8\u5171\u7dda<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"2\" rowspan=\"2\">\n<p>External \u5916\u90e8<\/p>\n<p>Power \u96fb\u6e90<\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>24VDC<\/p>\n<\/td>\n<td colspan=\"2\">\n<p>NPN<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"2\">\n<p>Sensor<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"3\">\n<p>24V+<\/p>\n<\/td>\n<td>\n<p>24V-<\/p>\n<\/td>\n<td>\n<p>S\/S<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"3\" rowspan=\"3\">\n<p>FBS<br \/> |<\/p>\n<\/td>\n<td colspan=\"2\" rowspan=\"3\">\n<p>\u5167\u90e8\u5171\u9edeInternal <\/p>\n<p>Common <\/p>\n<p>Terminal \u7aef\u5b50<\/p>\n<p>R2<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>R1:5.6K <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>R2:1K\u03a9<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"3\">\n<p>PLC<\/p>\n<\/td>\n<td colspan=\"2\">\n<p>24VDC<\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>Middle speed <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"5\">\n<p>(not available in <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"5\">\n<p>expansion modules) <\/p>\n<\/td>\n<td>\n<p>R1:3.3K\u03a9<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>R2:1.2K\u03a9<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>X0<\/p>\n<\/td>\n<td>\n<p>X1<\/p>\n<\/td>\n<td>\n<p>X2<\/p>\n<\/td>\n<td>\n<p>X3<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>z Wiring of single-end common SOURCE input <\/p>\n<p>External Common Wiring<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>External \u5916\u90e8<\/p>\n<\/td>\n<td rowspan=\"8\">\n<p>24VDC<\/p>\n<\/td>\n<td rowspan=\"3\">\n<p>24V+<\/p>\n<\/td>\n<td rowspan=\"3\">\n<p>24V-<\/p>\n<\/td>\n<td>\n<p> PNP<\/p>\n<\/td>\n<td rowspan=\"8\">\n<p>X0<\/p>\n<\/td>\n<td rowspan=\"8\">\n<p>R1<\/p>\n<\/td>\n<td rowspan=\"8\">\n<p>R2<\/p>\n<\/td>\n<td rowspan=\"8\">\n<p>X1<\/p>\n<\/td>\n<td rowspan=\"8\">\n<p>R1<\/p>\n<\/td>\n<td rowspan=\"8\">\n<p>R2<\/p>\n<\/td>\n<td rowspan=\"8\">\n<p>X2<\/p>\n<\/td>\n<td rowspan=\"8\">\n<p>R1<\/p>\n<\/td>\n<td rowspan=\"8\">\n<p>R2<\/p>\n<\/td>\n<td rowspan=\"8\">\n<p>X3<\/p>\n<\/td>\n<td rowspan=\"8\">\n<p>R1<\/p>\n<\/td>\n<td rowspan=\"8\">\n<p>\u8f38\u5165\u5143\u4ef6Input Circuit <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"2\">\n<p>Power <\/p>\n<\/td>\n<td>\n<p>Sensor<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>S\/S<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"2\">\n<p>FBS<\/p>\n<\/td>\n<td colspan=\"2\" rowspan=\"4\">\n<p>24VDC<\/p>\n<\/td>\n<td>\n<p>Internal <br \/>\u5167\u90e8\u5171\u9edeCommon <\/p>\n<p>Terminal \u7aef\u5b50<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"4\">\n<p>R2<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p> |<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"2\">\n<p>PLC<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"2\">\n<p>(not available in (\u64f4\u5145\u6a21\u7d44\u7121)<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>expansion modules) <\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>X0<\/p>\n<\/td>\n<td>\n<p>X1<\/p>\n<\/td>\n<td>\n<p>X2<\/p>\n<\/td>\n<td>\n<p>X3<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n","protected":false},"excerpt":{"rendered":"<p>The FBS-PLC provides the ultra high speed differential  [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[33],"tags":[],"class_list":["post-3412","post","type-post","status-publish","format-standard","hentry","category-en-fbs-hw"],"_links":{"self":[{"href":"https:\/\/resource.fatek.com\/index.php\/wp-json\/wp\/v2\/posts\/3412","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/resource.fatek.com\/index.php\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/resource.fatek.com\/index.php\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/resource.fatek.com\/index.php\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/resource.fatek.com\/index.php\/wp-json\/wp\/v2\/comments?post=3412"}],"version-history":[{"count":0,"href":"https:\/\/resource.fatek.com\/index.php\/wp-json\/wp\/v2\/posts\/3412\/revisions"}],"wp:attachment":[{"href":"https:\/\/resource.fatek.com\/index.php\/wp-json\/wp\/v2\/media?parent=3412"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/resource.fatek.com\/index.php\/wp-json\/wp\/v2\/categories?post=3412"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/resource.fatek.com\/index.php\/wp-json\/wp\/v2\/tags?post=3412"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}