{"id":3423,"date":"2026-11-17T21:34:59","date_gmt":"2026-11-17T13:34:59","guid":{"rendered":"https:\/\/resource.fatek.com\/index.php\/2026\/11\/17\/fbs-hw-en-018\/"},"modified":"2026-11-17T21:34:59","modified_gmt":"2026-11-17T13:34:59","slug":"fbs-hw-en-018","status":"publish","type":"post","link":"https:\/\/resource.fatek.com\/index.php\/2026\/11\/17\/fbs-hw-en-018\/","title":{"rendered":"Chapter 18 AIO Module"},"content":{"rendered":"<p>18.1FBs-6AD Analog Input Module <\/p>\n<p>FBs-6AD is one of the analog input modules of FATEK FBs series PLC. It provides 6 channels A\/D input with 12 or 14 bits effective resolution.. Base on the different jumper settings it can measure the varieties of current or voltage signal. The reading value is represented by a 14-bit value no matter the effective resolution is set to 12 or 14 bits. In order to filter out the field noise imposed on the signal, it also provides the average of sample input function. <\/p>\n<h4> 18.1.1Specifications of FBs-6AD <\/h4>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td colspan=\"3\">\n<p>Item <\/p>\n<\/td>\n<td>\n<p>Specifications <\/p>\n<\/td>\n<td>\n<p>Remark <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"3\">\n<p>Total Channel <\/p>\n<\/td>\n<td>\n<p>6 Channel <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td colspan=\"3\">\n<p>Digital Input Value <\/p>\n<\/td>\n<td>\n<p>\u22128192\uff5e+8191 or  0\uff5e16383(14 bits) \u22122048\uff5e+2047 or  0\uff5e4095(12 bits) <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td rowspan=\"4\">\n<p> Span  Of <br \/>Analog  input <\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>Bipolar* <\/p>\n<\/td>\n<td>\n<p>10V* <\/p>\n<\/td>\n<td>\n<p>*1.Voltage\uff1a\u221210\uff5e10V  5.Current\uff1a\u221220\uff5e20mA <\/p>\n<\/td>\n<td rowspan=\"4\">\n<p>*\uff1aIt means the default setting<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>5V <\/p>\n<\/td>\n<td>\n<p> 2. Voltage\uff1a\u22125\uff5e5V  6. Current\uff1a\u221210\uff5e10mA<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"2\">\n<p>Unipolar <\/p>\n<\/td>\n<td>\n<p>10V <\/p>\n<\/td>\n<td>\n<p> 3. Voltage\uff1a0\uff5e10V  7. Current\uff1a0\uff5e20mA <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>5V <\/p>\n<\/td>\n<td>\n<p> 4. Voltage\uff1a0\uff5e5V  8. Current\uff1a0\uff5e10mA <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"3\">\n<p>Resolution <\/p>\n<\/td>\n<td>\n<p>14 or 12 bits <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td colspan=\"3\">\n<p>Finest resolution <\/p>\n<\/td>\n<td>\n<p>Voltage\uff1a0.3mV <br \/>Current\uff1a0.61\u00b5A <\/p>\n<\/td>\n<td>\n<p>= Analog input signal \/ 16383 <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"3\">\n<p>I\/O Points Occupied <\/p>\n<\/td>\n<td>\n<p>6 IR(Input Register) <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td colspan=\"3\">\n<p>Accuracy <\/p>\n<\/td>\n<td>\n<p>Within \u00b11% of full scale <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td colspan=\"3\">\n<p>Conversion Time <\/p>\n<\/td>\n<td>\n<p>Updated each scan <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td colspan=\"3\">\n<p>Maximum absolute input signal <\/p>\n<\/td>\n<td>\n<p>Voltage\uff1a\u00b115V\uff08max\uff09<br \/>Current\uff1a\u00b130mA\uff08max\uff09<\/p>\n<\/td>\n<td>\n<p>It may cause the destruction to hardware if exceeds this value. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"3\">\n<p>Input resistance <\/p>\n<\/td>\n<td>\n<p>63.2K\u2126\uff08Voltage input\uff09\u3001250\u2126\uff08Current input\uff09<\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td colspan=\"3\">\n<p>Isolation <\/p>\n<\/td>\n<td>\n<p>Transformer(Power) and photocouple(Signal) <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td colspan=\"3\">\n<p>Indicator(s) <\/p>\n<\/td>\n<td>\n<p>5VPWR LED <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td colspan=\"3\">\n<p>Supply Power <\/p>\n<\/td>\n<td>\n<p>24V-15%\/+20%\u30012VA <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td colspan=\"3\">\n<p>Internal Power Consumption <\/p>\n<\/td>\n<td>\n<p>5V\u3001100mA <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td colspan=\"3\">\n<p>Operating Temperature <\/p>\n<\/td>\n<td>\n<p>0 ~ 60 \u2103<\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td colspan=\"3\">\n<p>Storage Temperature <\/p>\n<\/td>\n<td>\n<p>-20 ~ 80 \u2103<\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td colspan=\"3\">\n<p>Dimensions <\/p>\n<\/td>\n<td>\n<p>40(W)x90(H)x80(D) mm <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-001.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-002.png\" \/><\/p>\n<h4>18.1.2The Procedure of Using FBs-6AD Module <\/h4>\n<p>Start <\/p>\n<p>Set the I\/O voltage\/current (V\/I), polarity (B\/U), and <\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>the V\/I range of each point before installation. <\/p>\n<\/td>\n<td rowspan=\"4\">\n<p>&#8212;&#8212;- <\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>Please refer to section 18.1.4 for hardware <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"2\">\n<p>Connect FBs-6AD to the expansion interface on <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"2\">\n<p>explanation.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>PLC in series and connect an external 24VDC <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>source and analog output wires to the module. <\/p>\n<p>Directly read the value of the six corresponding <br \/>value input registers to obtain the analog input <br \/>reading of CH0~CH63. <\/p>\n<p>End <\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p> 18.1.3Address Allocation of FBs-PLC Analog Inputs <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>The I\/O addressing of FBs-6AD inputs is beginning from the module closest to main unit, it is orderly numbered as CH0\uff5eCH5 (1st module), CH6\uff5eCH11 (2nd module), CH12\uff5eCH17 (3rd module)\u2026\u2026 and increased with occurring order number, i.e. for each module, it adds with 6 and is totally 64 inputs from CH0\uff5eCH63, and they are corresponding to the respective internal analogue input register of PLC (so called as IR register) R3840\uff5eR3903 as listed in following table. After connecting FBs-6AD to the expansion interface on the PLC, FBs-PLC will automatically detect the number of AD points. WinProladder will automatically detect and calculate the IRs on the system after connecting to the PLC. Users may refer to the I\/O Module Number Configuration provided by WinProladder in order to find out the exact I\/O address of each expansion module to facilitate programming.<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p> Numeric Input <\/p>\n<\/td>\n<td>\n<p>Content of IR (CH0\uff5eCH63) <\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>Input label <\/p>\n<\/td>\n<td rowspan=\"14\">\n<p>FBs-6AD <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"3\">\n<p> Register\uff08IR\uff09<\/p>\n<\/td>\n<td rowspan=\"3\">\n<p> B 15 B 1 4 B 1 3 B 1 2 B 11 B 1 0 B 9 B 8 B 7 B 6 B 5 B 4 B 3 B 2 B 1 B 0<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Of FBs- <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>6AD <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p> IR+0 <\/p>\n<\/td>\n<td>\n<p> 14\/12 bit ; 14-bit , B14~ B15= B13 ; 12-bit, B12~ B15= B11<\/p>\n<\/td>\n<td>\n<p>CH0 <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p> IR +1 <\/p>\n<\/td>\n<td>\n<p> 14\/12 bit ; 14-bit , B14~ B15= B13 ; 12-bit, B12~ B15= B11<\/p>\n<\/td>\n<td>\n<p>CH1 <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p> IR +2 <\/p>\n<\/td>\n<td>\n<p> \u3003<\/p>\n<\/td>\n<td>\n<p>CH2 <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p> IR +3 <\/p>\n<\/td>\n<td>\n<p> \u3003<\/p>\n<\/td>\n<td>\n<p>CH3 <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p> IR +4 <\/p>\n<\/td>\n<td>\n<p> \u3003<\/p>\n<\/td>\n<td>\n<p>CH4 <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p> IR +5 <\/p>\n<\/td>\n<td>\n<p> \u3003<\/p>\n<\/td>\n<td>\n<p>CH5 <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p> IR +6 <\/p>\n<\/td>\n<td>\n<p> Depends on module type <\/p>\n<\/td>\n<td>\n<p>CHX <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p> IR +7 <\/p>\n<\/td>\n<td>\n<p> Depends on module type <\/p>\n<\/td>\n<td>\n<p>CHX <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p> IR +8 <\/p>\n<\/td>\n<td>\n<p> \u3003 <\/p>\n<\/td>\n<td>\n<p>CHX <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p> IR +9 <\/p>\n<\/td>\n<td>\n<p> \u3003 <\/p>\n<\/td>\n<td>\n<p>CHX <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-003.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-004.png\" \/><\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>R3896 <\/p>\n<\/td>\n<td>\n<p> \u3003 <\/p>\n<\/td>\n<td>\n<p>CHX <\/p>\n<\/td>\n<td rowspan=\"8\">\n<p>Other Modules <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>R3897 <\/p>\n<\/td>\n<td>\n<p> \u3003 <\/p>\n<\/td>\n<td>\n<p>CHX <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>R3898 <\/p>\n<\/td>\n<td>\n<p> \u3003 <\/p>\n<\/td>\n<td>\n<p>CHX <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>R3899 <\/p>\n<\/td>\n<td>\n<p> \u3003 <\/p>\n<\/td>\n<td>\n<p>CHX <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>R3900 <\/p>\n<\/td>\n<td>\n<p> \u3003 <\/p>\n<\/td>\n<td>\n<p>CHX <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>R3901 <\/p>\n<\/td>\n<td>\n<p> \u3003 <\/p>\n<\/td>\n<td>\n<p>CHX <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>R3902 <\/p>\n<\/td>\n<td>\n<p>Depends on module type<\/p>\n<\/td>\n<td>\n<p>CHX <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>R3903 <\/p>\n<\/td>\n<td>\n<p>Depends on module type<\/p>\n<\/td>\n<td>\n<p>CHX <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"4\"><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>1<\/p>\n<\/td>\n<td>\n<p>6<\/p>\n<\/td>\n<td>\n<p>7<\/p>\n<\/td>\n<td>\n<p>8<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h4> 18.1.4FBs-6AD Hardware Description <\/h4>\n<p>\u203b FBs-6AD contains 3 PCBs overlapping one <\/p>\n<p>another. The lowest one is the power <\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td rowspan=\"4\">\n<p>2<\/p>\n<\/td>\n<td rowspan=\"4\">\n<p><strong>V<\/strong><\/p>\n<\/td>\n<td rowspan=\"4\">\n<p><strong>I<\/strong><\/p>\n<\/td>\n<td colspan=\"3\" rowspan=\"2\">\n<p><strong>24V IN<\/strong><\/p>\n<\/td>\n<td rowspan=\"2\">\n<p><strong>AG<\/strong><\/p>\n<\/td>\n<td rowspan=\"4\">\n<p><strong>I0+ <\/strong>\t<strong>I1+<\/strong><\/p>\n<p><strong>I0-I1-<\/strong><\/p>\n<\/td>\n<td>\n<p>supply unit (isolated power supply). The <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"2\">\n<p>middle one is the I\/O board (connectors <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"2\">\n<p><strong>U<\/strong><\/p>\n<\/td>\n<td rowspan=\"2\">\n<p><strong>B<\/strong><\/p>\n<\/td>\n<td rowspan=\"2\">\n<p><strong>5V<\/strong><\/p>\n<\/td>\n<td rowspan=\"2\">\n<p><strong>10V<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>are on this layer). The upper one is the <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>control board (control\/expansion I\/O <\/p>\n<p>connections) as described below.<strong>:<\/strong><\/p>\n<p>4<\/p>\n<p><strong>POW<\/strong><\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>3<\/p>\n<\/td>\n<td>\n<p><strong>FBs-6AD<\/strong><\/p>\n<p><strong>I2+ I3+ <\/strong>\t<strong>I4+ <\/strong>\t<strong>I5+<\/strong><\/p>\n<p><strong>I2-<\/strong>\t<strong>I3-<\/strong>\t<strong>I4-<\/strong>\t<strong>I5-<\/strong><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>5<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>9<\/p>\n<\/td>\n<td>\n<p>10<\/p>\n<\/td>\n<td>\n<p>11<\/p>\n<\/td>\n<td>\n<p>12<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p> Outlook of top view <\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-005.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-006.png\" \/><\/p>\n<p>\u25cb1 External power input terminal \uff1aPower supply of analogue circuit for FBs-6AD, the voltage can be 24VDC\u00b120% and <\/p>\n<p>should be supplied with 4W of power at least. <\/p>\n<p>\u25cb2 Protecting ground terminal\uff1aConnect to the shielding of the signal cable. <\/p>\n<p>\u25cb3 Expansion input cable\uff1aIt should be connected to the front expansion unit, or the expansion output of main unit. <\/p>\n<p>\u25cb4 Expansion output connector\uff1aProvides the connection for next expansion unit. <\/p>\n<p>\u25cb5 Power indicator\uff1a It indicates whether the power supply at analogue circuit and external input power source are <\/p>\n<p>normal. <\/p>\n<p>\u25cb6 AG Ground\uff1aNo connection is needed in general; except when the common mode signal is too high. See examples <\/p>\n<p>overleaf for details. <\/p>\n<p>\u25cb7\uff5e\u25cb12 \uff1aInput terminal of CH0\uff5eCH5. <\/p>\n<h5> 18.1.4.1 FBs-6AD Hardware Jumper Setting <\/h5>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>JP5<\/p>\n<\/td>\n<td>\n<p>V I<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>B<\/p>\n<\/td>\n<td>\n<p>U<\/p>\n<\/td>\n<td>\n<p>JP1<\/p>\n<\/td>\n<td><\/td>\n<td><\/td>\n<td>\n<p>JP4<\/p>\n<\/td>\n<td>\n<p>V<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<td>\n<p>B<\/p>\n<\/td>\n<td><\/td>\n<td><\/td>\n<td>\n<p>I<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<td>\n<p>U<\/p>\n<\/td>\n<td><\/td>\n<td>\n<p>JP2<\/p>\n<\/td>\n<td>\n<p>5V<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>10V<\/p>\n<p>V<\/p>\n<p>I<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td colspan=\"4\"><\/td>\n<\/tr>\n<tr>\n<td>\n<p>V<\/p>\n<\/td>\n<td>\n<p>JP7<\/p>\n<\/td>\n<td>\n<p>JP8<\/p>\n<\/td>\n<td>\n<p>V<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td>\n<p>I<\/p>\n<\/td>\n<td><\/td>\n<td><\/td>\n<td>\n<p>I<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td>\n<p>V<\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>JP6<\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>JP9<\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>V<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td><\/td>\n<\/tr>\n<tr>\n<td>\n<p>I<\/p>\n<\/td>\n<td><\/td>\n<td><\/td>\n<td>\n<p>I<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>Pin layout in control board (open top cover) <\/p>\n<p>Pin layout on I\/O board (remove control board) <\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-007.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-008.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-009.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-010.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-011.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-012.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-013.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-014.png\" \/><\/p>\n<p> 1. Input code format selection (JP1) <\/p>\n<p> Users can select between unipolar and bipolar codes. The input range of unipolar codes and bipolar codes is 0~16383 and \u20138192~8191, respectively. The two extreme values of these formats correspond to the lowest and highest input signal values, respectively (see table below). For example, if the input signal type is set to -10V~ +10V, the unipolar code corresponding to the input is 8192 and the bipolar code corresponding to the input is 0 for 0V input. If the input is 10V, the unipolar code corresponding to the input is 16383 and the bipolar code corresponding to the input is 8191. In general, the input code format is selected according to the form of input signals; i.e. unipolar codes for unipolar input signals; and bipolar codes for bipolar input signals. In doing so, their correlations will become more heuristics. Unless it is necessary to make a deviation conversion through FUN33; otherwise, do not select bipolar codes for unipolar input signals (see FUN33 description for details). The format of input codes of all channels is selected from JP1. See above diagram for the location of JP1\uff1a<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p> Input Code Format <\/p>\n<\/td>\n<td>\n<p> JP1 Setting <\/p>\n<\/td>\n<td>\n<p> Input Value Range <\/p>\n<\/td>\n<td>\n<p> Corresponding Input Signals <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p> Bipolar <\/p>\n<\/td>\n<td><\/td>\n<td>\n<p> -8192\uff5e8191 <\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>-10V\uff5e10V(-20mA\uff5e20mA)  -5V\uff5e5V(-20mA\uff5e20mA) \t 0V\uff5e10V(0mA\uff5e20mA) \t 0V\uff5e5V(0mA\uff5e10mA) <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p> Unipolar <\/p>\n<\/td>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>B<\/p>\n<\/td>\n<td>\n<p>U<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-015.png\" \/><\/p>\n<\/td>\n<td>\n<p> 0\uff5e16383 <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-016.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-017.png\" \/><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p> 2. Input signal form setup (JP2&amp;JP3) <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>\t Users can set the input signal form (voltage\/current) of individual channels; except the polarity and amplitude which are common. The location of jumpers are tabulated below\uff1a<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p> Signal Form <\/p>\n<\/td>\n<td>\n<p> JP3 Setting <\/p>\n<\/td>\n<td>\n<p> JP2 Setting <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>0\uff5e10V <br \/>or <br \/> 0\uff5e20mA <\/p>\n<p>0\uff5e5V <br \/>or <br \/> 0\uff5e10mA <\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>-10\uff5e+10V <br \/>or <\/p>\n<p> -20\uff5e+20mA <\/p>\n<p>-5\uff5e+5V <br \/>or <\/p>\n<p> -10mA\uff5e+10mA <\/p>\n<\/td>\n<td>\n<p>5V <br \/>10V<\/p>\n<p>5V <br \/>10V<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-018.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-019.png\" \/><\/p>\n<p>\t CH0~CH5 share the JP2 and JP3 jumper, therefore all channels must be of the same type that is one of the four types listed at above table. Only the current\/voltage setting can be chosen arbitrary\uff1a<\/p>\n<p> 3. Voltage or current setting (JP4\uff5eJP9) <\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p> Signal Type <\/p>\n<\/td>\n<td>\n<p> JP4(CH0) \uff5e JP9(CH5) Setting <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Voltage<\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-020.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Current<\/p>\n<\/td>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-021.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-022.png\" \/><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>\uff0aThe default factory settings of 6AD analogue input module are\uff1a<\/p>\n<p>Input code format \u00c6 Bipolar(-8192~+8191) <\/p>\n<p> Input signal type and range \u00c6 Bipolar(-10V ~ +10V) <\/p>\n<p>For those applications that require the setting differ than the above default setting should make some modifications of jumper position according to above tables. While application, besides the setting of jumper should be conducted, the AI module configuration of WinProladder also need to be performed. <\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-023.png\" \/><\/p>\n<h4> 18.1.5FBs-6AD Input Circuit Diagram <\/h4>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>FBs-6AD<\/p>\n<\/td>\n<td rowspan=\"4\">\n<p>V<\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>24V+<\/p>\n<\/td>\n<td rowspan=\"8\">\n<p>+<\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>24VDC<\/p>\n<\/td>\n<td colspan=\"3\" rowspan=\"2\">\n<p>Inputs<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>+15V<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>15V<\/p>\n<\/td>\n<td>\n<p>24V<\/p>\n<\/td>\n<td rowspan=\"6\">\n<p>External power supply<\/p>\n<\/td>\n<td colspan=\"2\" rowspan=\"3\">\n<p>V<\/p>\n<\/td>\n<td rowspan=\"3\">\n<p>CH0  Input Ch0 Input <\/p>\n<p>(Voltage sou<\/p>\n<p>(Voltage Source) <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"2\">\n<p>+<\/p>\n<\/td>\n<td>\n<p>I0+<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>I<\/p>\n<\/td>\n<td>\n<p>I0<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"3\">\n<p>+<\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>V<\/p>\n<\/td>\n<td>\n<p>I1+<\/p>\n<\/td>\n<td rowspan=\"3\">\n<p>I<\/p>\n<\/td>\n<td colspan=\"2\" rowspan=\"3\">\n<p>CH1  Input Ch1 Input <\/p>\n<p>(Current sou (Current Source) <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"2\">\n<p>I1<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>I<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>AG<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td rowspan=\"3\">\n<p>+<\/p>\n<\/td>\n<td>\n<p>I<\/p>\n<\/td>\n<td>\n<p>I5+<\/p>\n<\/td>\n<td rowspan=\"3\">\n<p>Twisted pair with shielding<\/p>\n<\/td>\n<td rowspan=\"3\">\n<p>V<\/p>\n<\/td>\n<td>\n<p>CH5  Input Ch5 Input <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>V<\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>I5<\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>(Voltage sou (Voltage Source) <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Voltage\/<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>Current <br \/>selection<\/p>\n<h4> 18.1.6FBs-6AD Input Characteristics and Jumper Setting <\/h4>\n<p>Users can select the Input ranges of FBs-6AD from the jumpers described above, such as V\/I, U\/B (I\/O codes), U\/B (signal form), 5V\/10V, etc. The Input signals conversion characteristics of these settings are illustrated below. Users can adjust different Input forms by coordinating the conversion curve with various V\/I (voltage\/current) Input settings. See Section 18.1.4 for details of V\/I settings <strong>:<\/strong><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-024.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-025.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-026.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-027.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-028.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-029.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-030.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-031.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-032.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-033.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-034.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-035.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-036.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-037.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-038.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-039.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-040.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-041.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-042.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-043.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-044.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-045.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-046.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-047.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-048.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-049.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-050.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-051.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-052.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-053.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-054.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-055.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-056.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-057.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-058.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-059.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-060.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-061.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-062.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-063.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-064.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-065.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-066.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-067.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-068.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-069.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-070.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-071.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-072.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-073.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-074.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-075.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-076.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-077.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-078.png\" \/><\/p>\n<p>Diagram 1\uff1aBipolar 10V\uff0820mA\uff09Span <\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p> Input <\/p>\n<\/td>\n<td>\n<p>Voltage <\/p>\n<\/td>\n<td>\n<p>\u221210V\uff5e10V <\/p>\n<\/td>\n<td>\n<p>Jumper<\/p>\n<\/td>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td>\n<p> Range <\/p>\n<\/td>\n<td>\n<p>Current <\/p>\n<\/td>\n<td colspan=\"2\">\n<p>\u221220mA\uff5e20mA  Setting<\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-079.png\" \/><\/p>\n<\/td>\n<td><\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-080.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-081.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-082.png\" \/><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p> 14 bit input format <\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-083.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-084.png\" \/><\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-085.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-086.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-087.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-088.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-089.png\" \/><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-090.png\" \/><\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-091.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-092.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-093.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-094.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-095.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-096.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-097.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-098.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-099.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-100.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-101.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-102.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"3\">\n<p> 12 bit input format <\/p>\n<\/td>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-103.png\" \/><\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-104.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-105.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-106.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-107.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-108.png\" \/><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-109.png\" \/><\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-110.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-111.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-112.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-113.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-114.png\" \/><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-115.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-116.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-117.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-118.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-119.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-120.png\" \/><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-121.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-122.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-123.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-124.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-125.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-126.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-127.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-128.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-129.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-130.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-131.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-132.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-133.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-134.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-135.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-136.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-137.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-138.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-139.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-140.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-141.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-142.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-143.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-144.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-145.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-146.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-147.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-148.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-149.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-150.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-151.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-152.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-153.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-154.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-155.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-156.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-157.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-158.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-159.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-160.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-161.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-162.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-163.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-164.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-165.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-166.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-167.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-168.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-169.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-170.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-171.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-172.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-173.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-174.png\" \/><\/p>\n<p>Diagram 2\uff1aBipolar 5V\uff0810mA\uff09Span <\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td rowspan=\"2\">\n<p> Input <br \/>Range <\/p>\n<\/td>\n<td>\n<p>Voltage<\/p>\n<\/td>\n<td>\n<p>\u22125V\uff5e5V <\/p>\n<\/td>\n<td rowspan=\"2\"><\/td>\n<td rowspan=\"2\"><\/td>\n<td rowspan=\"2\">\n<p>Jumper Setting<\/p>\n<\/td>\n<td rowspan=\"2\">\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-175.png\" \/><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<td rowspan=\"2\"><\/td>\n<td><\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td>\n<p>Current<\/p>\n<\/td>\n<td>\n<p>\u221210mA\uff5e10mA <\/p>\n<\/td>\n<td><\/td>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-176.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-177.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-178.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-179.png\" \/><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p> 14 bit input format <\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-180.png\" \/><\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-181.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-182.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-183.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-184.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-185.png\" \/><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-186.png\" \/><\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-187.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-188.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-189.png\" \/><\/p>\n<\/td>\n<td rowspan=\"2\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-190.png\" \/><\/p>\n<\/td>\n<td rowspan=\"2\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-191.png\" \/><\/p>\n<\/td>\n<td rowspan=\"2\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-192.png\" \/><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-193.png\" \/><\/p>\n<\/td>\n<td rowspan=\"2\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-194.png\" \/><\/p>\n<\/td>\n<td rowspan=\"2\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-195.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-196.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"3\">\n<p> 12 bit input format <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-197.png\" \/><\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-198.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-199.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-200.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-201.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-202.png\" \/><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-203.png\" \/><\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-204.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-205.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-206.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-207.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-208.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-209.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-210.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-211.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-212.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-213.png\" \/><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-214.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-215.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-216.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-217.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-218.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-219.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-220.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-221.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-222.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-223.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-224.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-225.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-226.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-227.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-228.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-229.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-230.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-231.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-232.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-233.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-234.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-235.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-236.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-237.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-238.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-239.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-240.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-241.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-242.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-243.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-244.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-245.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-246.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-247.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-248.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-249.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-250.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-251.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-252.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-253.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-254.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-255.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-256.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-257.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-258.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-259.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-260.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-261.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-262.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-263.png\" \/><\/p>\n<p>Diagram 3\uff1aUnipolar 10V\uff0820mA\uff09Span <\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td rowspan=\"2\">\n<p> Input <br \/>Range <\/p>\n<\/td>\n<td>\n<p>Voltage<\/p>\n<\/td>\n<td>\n<p>0V\uff5e10V <\/p>\n<\/td>\n<td rowspan=\"2\"><\/td>\n<td rowspan=\"2\">\n<p>Jumper Setting<\/p>\n<\/td>\n<td rowspan=\"2\">\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-264.png\" \/><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<td rowspan=\"2\"><\/td>\n<td><\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td>\n<p>Current<\/p>\n<\/td>\n<td>\n<p>0mA\uff5e20mA <\/p>\n<\/td>\n<td><\/td>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-265.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-266.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-267.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-268.png\" \/><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p> 14 bit input format <\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-269.png\" \/><\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-270.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-271.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-272.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-273.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-274.png\" \/><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-275.png\" \/><\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-276.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-277.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-278.png\" \/><\/p>\n<\/td>\n<td rowspan=\"2\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-279.png\" \/><\/p>\n<\/td>\n<td rowspan=\"2\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-280.png\" \/><\/p>\n<\/td>\n<td rowspan=\"2\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-281.png\" \/><\/p>\n<\/td>\n<td rowspan=\"2\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-282.png\" \/><\/p>\n<\/td>\n<td rowspan=\"2\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-283.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-284.png\" \/><\/p>\n<\/td>\n<td rowspan=\"2\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-285.png\" \/><\/p>\n<\/td>\n<td rowspan=\"2\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-286.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-287.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"3\">\n<p> 12 bit input format <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-288.png\" \/><\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-289.png\" \/><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-290.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-291.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-292.png\" \/><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-293.png\" \/><\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-294.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-295.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-296.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-297.png\" \/><\/p>\n<\/td>\n<td><\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-298.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-299.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-300.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-301.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-302.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-303.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-304.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-305.png\" \/><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-306.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-307.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-308.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-309.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-310.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-311.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-312.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-313.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-314.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-315.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-316.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-317.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-318.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-319.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-320.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-321.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-322.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-323.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-324.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-325.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-326.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-327.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-328.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-329.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-330.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-331.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-332.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-333.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-334.png\" \/><\/p>\n<p>Diagram 4\uff1aUnipolar 5V\uff0810mA\uff09Span <\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td rowspan=\"2\">\n<p> Input <br \/>Range <\/p>\n<\/td>\n<td>\n<p>Voltage<\/p>\n<\/td>\n<td>\n<p>0V\uff5e5V <\/p>\n<\/td>\n<td rowspan=\"2\"><\/td>\n<td rowspan=\"2\">\n<p>Jumper Setting<\/p>\n<\/td>\n<td rowspan=\"2\">\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-335.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-336.png\" \/><\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-337.png\" \/><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<td rowspan=\"2\"><\/td>\n<td><\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td>\n<p>Current<\/p>\n<\/td>\n<td>\n<p>0mA\uff5e10mA <\/p>\n<\/td>\n<td><\/td>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-338.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-339.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-340.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-341.png\" \/><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p> 14 bit input format <\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-342.png\" \/><\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-343.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-344.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-345.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-346.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-347.png\" \/><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-348.png\" \/><\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-349.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-350.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-351.png\" \/><\/p>\n<\/td>\n<td rowspan=\"2\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-352.png\" \/><\/p>\n<\/td>\n<td rowspan=\"2\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-353.png\" \/><\/p>\n<\/td>\n<td rowspan=\"2\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-354.png\" \/><\/p>\n<\/td>\n<td rowspan=\"2\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-355.png\" \/><\/p>\n<\/td>\n<td rowspan=\"2\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-356.png\" \/><\/p>\n<\/td>\n<td rowspan=\"2\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-357.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-358.png\" \/><\/p>\n<\/td>\n<td rowspan=\"2\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-359.png\" \/><\/p>\n<\/td>\n<td rowspan=\"2\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-360.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-361.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"3\">\n<p> 12 bit input format <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>Analog Input(MAX.)<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td rowspan=\"2\">\n<p>Input Register Value <\/p>\n<\/td>\n<td rowspan=\"3\">\n<p>-2048<\/p>\n<\/td>\n<td>\n<p>+5V(+10mA)<\/p>\n<\/td>\n<td>\n<p>Bipolar(B)<\/p>\n<\/td>\n<td>\n<p>Unipolar(U)<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"2\">\n<p>0<\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>+2047<\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>+4095<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>(12 bit)<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>0V(0mA)<\/p>\n<p>Analog Input(Min.)<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>18.1.7  Configuration of Analog Input <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p> For the analog input reading of FBs series PLC, there are 3 kinds of data formats used to represent the reading value in compliance with the variation of the external analog inputs. Also, it supports the average method to improve the drift of the reading value away from the noise interference or unstable original analog signal. <\/p>\n<p>\t The WinProladder provides the friendly and convenient operation interface for the purpose of analog input configuration. There are &quot;analog input data format&quot;, &quot;valid bits&quot;, and &quot;number of average&quot; for settings. <\/p>\n<p> The procedures for analog inputs configuration with WinProladder <\/p>\n<p>Click the item \u201cI\/O Configuration\u201d which in Project Windows <strong>: <\/strong><\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td colspan=\"3\">\n<p> Project name <\/p>\n<\/td>\n<td colspan=\"4\" rowspan=\"2\"><\/td>\n<\/tr>\n<tr>\n<td rowspan=\"5\"><\/td>\n<td><\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td><\/td>\n<td>\n<p> S<\/p>\n<\/td>\n<td>\n<p>stem Co<\/p>\n<\/td>\n<td>\n<p>nfigurat<\/p>\n<\/td>\n<td>\n<p>on <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p> I\/O Configuration  \u00c6 Select  \u201cAI Configuration\u201d <\/p>\n<p>\u25cf  If FBs main unit connects with AD Expansion nodule, then it will auto detect and allotted the system resource(IR). <\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-362.png\" \/><\/p>\n<p>Description of the configuration screen\uff1a<\/p>\n<p>\u25cf  AI Data Format <strong>:<\/strong>All analog inputs can be assigned as 12-bit or 14-bit resolution of data format. <\/p>\n<p>\u25cf  AI Modules <strong>:<\/strong>This window displays the information of installed analog input modules, click the selective module will <\/p>\n<p>bring the setting window for valid bits and times of average. <\/p>\n<p>\u25cf  AI Setup <strong>:<\/strong>When the data format is 12-bit resolution, each channel of analog input can be allowed to set the times <\/p>\n<p>of average; When the data format is 14-bit resolution, each channel of analog input can be allowed to <\/p>\n<p>set the valid bits and times of average.<\/p>\n<p> AI Data Format <\/p>\n<p>\u25cf 12-bit resolution with sign representation (-2048\uff5e2047)\uff1a<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>B15 <\/p>\n<\/td>\n<td>\n<p>B14 <\/p>\n<\/td>\n<td>\n<p>B13 <\/p>\n<\/td>\n<td>\n<p>B12 <\/p>\n<\/td>\n<td>\n<p>B11 <\/p>\n<\/td>\n<td>\n<p>B10 <\/p>\n<\/td>\n<td>\n<p>B9<\/p>\n<\/td>\n<td>\n<p>B8<\/p>\n<\/td>\n<td>\n<p>B7<\/p>\n<\/td>\n<td>\n<p>B6<\/p>\n<\/td>\n<td>\n<p>B5<\/p>\n<\/td>\n<td>\n<p>B4<\/p>\n<\/td>\n<td>\n<p>B3 <\/p>\n<\/td>\n<td>\n<p>B2 <\/p>\n<\/td>\n<td>\n<p>B1 <\/p>\n<\/td>\n<td>\n<p>B0<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>B11 <\/p>\n<\/td>\n<td>\n<p>B11 <\/p>\n<\/td>\n<td>\n<p>B11 <\/p>\n<\/td>\n<td>\n<p>B11 <\/p>\n<\/td>\n<td>\n<p>0\/1 <\/p>\n<\/td>\n<td>\n<p>0\/1 <\/p>\n<\/td>\n<td>\n<p>0\/1<\/p>\n<\/td>\n<td>\n<p>0\/1<\/p>\n<\/td>\n<td>\n<p>0\/1<\/p>\n<\/td>\n<td>\n<p>0\/1<\/p>\n<\/td>\n<td>\n<p>0\/1<\/p>\n<\/td>\n<td>\n<p>0\/1<\/p>\n<\/td>\n<td>\n<p>0\/1 <\/p>\n<\/td>\n<td>\n<p>0\/1 <\/p>\n<\/td>\n<td>\n<p>0\/1 <\/p>\n<\/td>\n<td>\n<p>0\/1<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>\uff0aB11 = 0&#8212;&#8212;&#8212;Positive reading value<\/p>\n<p> 1&#8212;&#8212;&#8212; Negative reading value<\/p>\n<p>\uff0aB15\uff5eB12 = B11<\/p>\n<p>\u25cf 12-bit resolution without sign representation(0\uff5e4095)\uff1a<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>B15 <\/p>\n<\/td>\n<td>\n<p>B14 <\/p>\n<\/td>\n<td>\n<p>B13 <\/p>\n<\/td>\n<td>\n<p>B12 <\/p>\n<\/td>\n<td>\n<p>B11 <\/p>\n<\/td>\n<td>\n<p>B10 <\/p>\n<\/td>\n<td>\n<p>B9<\/p>\n<\/td>\n<td>\n<p>B8<\/p>\n<\/td>\n<td>\n<p>B7<\/p>\n<\/td>\n<td>\n<p>B6<\/p>\n<\/td>\n<td>\n<p>B5<\/p>\n<\/td>\n<td>\n<p>B4<\/p>\n<\/td>\n<td>\n<p>B3 <\/p>\n<\/td>\n<td>\n<p>B2 <\/p>\n<\/td>\n<td>\n<p>B1 <\/p>\n<\/td>\n<td>\n<p>B0<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>0 <\/p>\n<\/td>\n<td>\n<p>0 <\/p>\n<\/td>\n<td>\n<p>0 <\/p>\n<\/td>\n<td>\n<p>0 <\/p>\n<\/td>\n<td>\n<p>0\/1 <\/p>\n<\/td>\n<td>\n<p>0\/1 <\/p>\n<\/td>\n<td>\n<p>0\/1<\/p>\n<\/td>\n<td>\n<p>0\/1<\/p>\n<\/td>\n<td>\n<p>0\/1<\/p>\n<\/td>\n<td>\n<p>0\/1<\/p>\n<\/td>\n<td>\n<p>0\/1<\/p>\n<\/td>\n<td>\n<p>0\/1<\/p>\n<\/td>\n<td>\n<p>0\/1 <\/p>\n<\/td>\n<td>\n<p>0\/1 <\/p>\n<\/td>\n<td>\n<p>0\/1 <\/p>\n<\/td>\n<td>\n<p>0\/1<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>\u25cf 14-bit but valid 12-bit resolution with sign representation (-8192\uff5e8188)\uff1a<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>B15 <\/p>\n<\/td>\n<td>\n<p>B14 <\/p>\n<\/td>\n<td>\n<p>B13 <\/p>\n<\/td>\n<td>\n<p>B12 <\/p>\n<\/td>\n<td>\n<p>B11 <\/p>\n<\/td>\n<td>\n<p>B10 <\/p>\n<\/td>\n<td>\n<p>B9<\/p>\n<\/td>\n<td>\n<p>B8<\/p>\n<\/td>\n<td>\n<p>B7<\/p>\n<\/td>\n<td>\n<p>B6<\/p>\n<\/td>\n<td>\n<p>B5<\/p>\n<\/td>\n<td>\n<p>B4<\/p>\n<\/td>\n<td>\n<p>B3 <\/p>\n<\/td>\n<td>\n<p>B2 <\/p>\n<\/td>\n<td>\n<p>B1 <\/p>\n<\/td>\n<td>\n<p>B0<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>B13 <\/p>\n<\/td>\n<td>\n<p>B13 <\/p>\n<\/td>\n<td>\n<p>0\/1 <\/p>\n<\/td>\n<td>\n<p>0\/1 <\/p>\n<\/td>\n<td>\n<p>0\/1 <\/p>\n<\/td>\n<td>\n<p>0\/1 <\/p>\n<\/td>\n<td>\n<p>0\/1<\/p>\n<\/td>\n<td>\n<p>0\/1<\/p>\n<\/td>\n<td>\n<p>0\/1<\/p>\n<\/td>\n<td>\n<p>0\/1<\/p>\n<\/td>\n<td>\n<p>0\/1<\/p>\n<\/td>\n<td>\n<p>0\/1<\/p>\n<\/td>\n<td>\n<p>0\/1 <\/p>\n<\/td>\n<td>\n<p>0\/1 <\/p>\n<\/td>\n<td>\n<p>0 <\/p>\n<\/td>\n<td>\n<p>0 <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>\uff0aB13 = 0&#8212;&#8212;&#8212; Positive reading value<\/p>\n<p> 1&#8212;&#8212;&#8212; Negative reading value <\/p>\n<p>\uff0aB15\uff5eB14= B13 ; B1\uff5eB0= 0<br \/>\uff0aIn this Data Format, because B1 and B0 are fixed 0 then value change by times of 4. <\/p>\n<p>\u25cf 14-bit but valid 12-bit resolution without sign representation (0\uff5e16380)\uff1a<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>B15 <\/p>\n<\/td>\n<td>\n<p>B14 <\/p>\n<\/td>\n<td>\n<p>B13 <\/p>\n<\/td>\n<td>\n<p>B12 <\/p>\n<\/td>\n<td>\n<p>B11 <\/p>\n<\/td>\n<td>\n<p>B10 <\/p>\n<\/td>\n<td>\n<p>B9<\/p>\n<\/td>\n<td>\n<p>B8<\/p>\n<\/td>\n<td>\n<p>B7<\/p>\n<\/td>\n<td>\n<p>B6<\/p>\n<\/td>\n<td>\n<p>B5<\/p>\n<\/td>\n<td>\n<p>B4<\/p>\n<\/td>\n<td>\n<p>B3 <\/p>\n<\/td>\n<td>\n<p>B2 <\/p>\n<\/td>\n<td>\n<p>B1 <\/p>\n<\/td>\n<td>\n<p>B0<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>0 <\/p>\n<\/td>\n<td>\n<p>0 <\/p>\n<\/td>\n<td>\n<p>0\/1 <\/p>\n<\/td>\n<td>\n<p>0\/1 <\/p>\n<\/td>\n<td>\n<p>0\/1 <\/p>\n<\/td>\n<td>\n<p>0\/1 <\/p>\n<\/td>\n<td>\n<p>0\/1<\/p>\n<\/td>\n<td>\n<p>0\/1<\/p>\n<\/td>\n<td>\n<p>0\/1<\/p>\n<\/td>\n<td>\n<p>0\/1<\/p>\n<\/td>\n<td>\n<p>0\/1<\/p>\n<\/td>\n<td>\n<p>0\/1<\/p>\n<\/td>\n<td>\n<p>0\/1 <\/p>\n<\/td>\n<td>\n<p>0\/1 <\/p>\n<\/td>\n<td>\n<p>0 <\/p>\n<\/td>\n<td>\n<p>0 <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>\uff0aIn this Data Format, because B1 and B0 are fixed 0 then value change by time of 4. <\/p>\n<p>\u25cf 14-bit resolution with sign representation (-8192\uff5e8191)\uff1a<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>B15 <\/p>\n<\/td>\n<td>\n<p>B14 <\/p>\n<\/td>\n<td>\n<p>B13 <\/p>\n<\/td>\n<td>\n<p>B12 <\/p>\n<\/td>\n<td>\n<p>B11 <\/p>\n<\/td>\n<td>\n<p>B10 <\/p>\n<\/td>\n<td>\n<p>B9<\/p>\n<\/td>\n<td>\n<p>B8<\/p>\n<\/td>\n<td>\n<p>B7<\/p>\n<\/td>\n<td>\n<p>B6<\/p>\n<\/td>\n<td>\n<p>B5<\/p>\n<\/td>\n<td>\n<p>B4<\/p>\n<\/td>\n<td>\n<p>B3 <\/p>\n<\/td>\n<td>\n<p>B2 <\/p>\n<\/td>\n<td>\n<p>B1 <\/p>\n<\/td>\n<td>\n<p>B0<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>B13 <\/p>\n<\/td>\n<td>\n<p>B13 <\/p>\n<\/td>\n<td>\n<p>0\/1 <\/p>\n<\/td>\n<td>\n<p>0\/1 <\/p>\n<\/td>\n<td>\n<p>0\/1 <\/p>\n<\/td>\n<td>\n<p>0\/1 <\/p>\n<\/td>\n<td>\n<p>0\/1<\/p>\n<\/td>\n<td>\n<p>0\/1<\/p>\n<\/td>\n<td>\n<p>0\/1<\/p>\n<\/td>\n<td>\n<p>0\/1<\/p>\n<\/td>\n<td>\n<p>0\/1<\/p>\n<\/td>\n<td>\n<p>0\/1<\/p>\n<\/td>\n<td>\n<p>0\/1 <\/p>\n<\/td>\n<td>\n<p>0\/1 <\/p>\n<\/td>\n<td>\n<p>0\/1 <\/p>\n<\/td>\n<td>\n<p>0\/1<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>\uff0aB13 = 0&#8212;&#8212;&#8212; Positive reading value<br \/>\t 1&#8212;&#8212;&#8212; Negative reading value<br \/>\uff0aB15\uff5eB14= B13 <\/p>\n<p>\u25cf 14-bit resolution without sign representation (0\uff5e16383)\uff1a<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>B15 <\/p>\n<\/td>\n<td>\n<p>B14 <\/p>\n<\/td>\n<td>\n<p>B13 <\/p>\n<\/td>\n<td>\n<p>B12 <\/p>\n<\/td>\n<td>\n<p>B11 <\/p>\n<\/td>\n<td>\n<p>B10 <\/p>\n<\/td>\n<td>\n<p>B9<\/p>\n<\/td>\n<td>\n<p>B8<\/p>\n<\/td>\n<td>\n<p>B7<\/p>\n<\/td>\n<td>\n<p>B6<\/p>\n<\/td>\n<td>\n<p>B5<\/p>\n<\/td>\n<td>\n<p>B4<\/p>\n<\/td>\n<td>\n<p>B3 <\/p>\n<\/td>\n<td>\n<p>B2 <\/p>\n<\/td>\n<td>\n<p>B1 <\/p>\n<\/td>\n<td>\n<p>B0<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>0 <\/p>\n<\/td>\n<td>\n<p>0 <\/p>\n<\/td>\n<td>\n<p>0\/1 <\/p>\n<\/td>\n<td>\n<p>0\/1 <\/p>\n<\/td>\n<td>\n<p>0\/1 <\/p>\n<\/td>\n<td>\n<p>0\/1 <\/p>\n<\/td>\n<td>\n<p>0\/1<\/p>\n<\/td>\n<td>\n<p>0\/1<\/p>\n<\/td>\n<td>\n<p>0\/1<\/p>\n<\/td>\n<td>\n<p>0\/1<\/p>\n<\/td>\n<td>\n<p>0\/1<\/p>\n<\/td>\n<td>\n<p>0\/1<\/p>\n<\/td>\n<td>\n<p>0\/1 <\/p>\n<\/td>\n<td>\n<p>0\/1 <\/p>\n<\/td>\n<td>\n<p>0\/1 <\/p>\n<\/td>\n<td>\n<p>0\/1<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p> Relative registers of AI configuration <\/p>\n<p> This introduction is for HMI or SCADA User, because they may modify through registers. Winprolader\u2019s User can <\/p>\n<p>ignore this introduction. When you configure Analog Input format with Winproladder, these value of registers will be <\/p>\n<p>finished. <\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Register <\/p>\n<\/td>\n<td>\n<p>Content <\/p>\n<\/td>\n<td>\n<p> Description <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>D4042 <\/p>\n<\/td>\n<td>\n<p>5612H <\/p>\n<\/td>\n<td>\n<p>all analog inputs are the 12-bit resolution ; it is allowed to set times of average for each channel. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3003<\/p>\n<\/td>\n<td>\n<p>5614H <\/p>\n<\/td>\n<td>\n<p>all analog inputs are the 14-bit resolution ; it is allowed to set times of average for each channel. <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Register<\/p>\n<\/td>\n<td>\n<p>Content<\/p>\n<\/td>\n<td>\n<p>Description<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"2\">\n<p>D4006 <\/p>\n<\/td>\n<td>\n<p>B0 = 0 <\/p>\n<\/td>\n<td>\n<p>AI channel 0 is valid 12-bit resolution. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>B0 = 1 <\/p>\n<\/td>\n<td>\n<p>AI channel 0 is valid 14-bit resolution. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3003<\/p>\n<\/td>\n<td>\n<p> \u25cf <br \/> \u25cf <br \/> \u25cf <br \/> \u25cf<\/p>\n<\/td>\n<td>\n<p> \u25cf <br \/> \u25cf <br \/> \u25cf <br \/> \u25cf<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"2\">\n<p>D4006 <\/p>\n<\/td>\n<td>\n<p>B15 = 0 <\/p>\n<\/td>\n<td>\n<p>AI channel 15 is valid 12-bit resolution. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>B15 = 1 <\/p>\n<\/td>\n<td>\n<p>AI channel 15 is valid 14-bit resolution. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"3\"><\/td>\n<\/tr>\n<tr>\n<td rowspan=\"2\">\n<p>D4007 <\/p>\n<\/td>\n<td>\n<p>B0 = 0 <\/p>\n<\/td>\n<td>\n<p>AI channel 16 is valid 12-bit resolution. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>B0 = 1 <\/p>\n<\/td>\n<td>\n<p>AI channel 16 is valid 14-bit resolution. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3003<\/p>\n<\/td>\n<td>\n<p> \u25cf <br \/> \u25cf <br \/> \u25cf <br \/> \u25cf<\/p>\n<\/td>\n<td>\n<p> \u25cf <br \/> \u25cf <br \/> \u25cf <br \/> \u25cf<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"2\">\n<p>D4007 <\/p>\n<\/td>\n<td>\n<p>B15 = 0 <\/p>\n<\/td>\n<td>\n<p>AI channel 31 is valid 12-bit resolution. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>B15 = 1 <\/p>\n<\/td>\n<td>\n<p>AI channel 31 is valid 14-bit resolution. <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Register<\/p>\n<\/td>\n<td>\n<p>Content<\/p>\n<\/td>\n<td>\n<p>Description<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"2\">\n<p>D4008 <\/p>\n<\/td>\n<td>\n<p>B0 = 0 <\/p>\n<\/td>\n<td>\n<p>AI channel 32 is valid 12-bit resolution. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>B0 = 1 <\/p>\n<\/td>\n<td>\n<p>AI channel 32 is valid 14-bit resolution. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3003<\/p>\n<\/td>\n<td>\n<p> \u25cf <br \/> \u25cf <br \/> \u25cf <br \/> \u25cf<\/p>\n<\/td>\n<td>\n<p> \u25cf <br \/> \u25cf <br \/> \u25cf <br \/> \u25cf<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"2\">\n<p>D4008 <\/p>\n<\/td>\n<td>\n<p>B15 = 0 <\/p>\n<\/td>\n<td>\n<p>AI channel 47 is valid 12-bit resolution. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>B15 = 1 <\/p>\n<\/td>\n<td>\n<p>AI channel 47 is valid 14-bit resolution. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"3\"><\/td>\n<\/tr>\n<tr>\n<td rowspan=\"2\">\n<p>D4009 <\/p>\n<\/td>\n<td>\n<p>B0 = 0 <\/p>\n<\/td>\n<td>\n<p>AI channel 48 is valid 12-bit resolution. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>B0 = 1 <\/p>\n<\/td>\n<td>\n<p>AI channel 48 is valid 14-bit resolution. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\u3003<\/p>\n<\/td>\n<td>\n<p> \u25cf <br \/> \u25cf <br \/> \u25cf <br \/> \u25cf<\/p>\n<\/td>\n<td>\n<p> \u25cf <br \/> \u25cf <br \/> \u25cf <br \/> \u25cf<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"2\">\n<p>D4009 <\/p>\n<\/td>\n<td>\n<p>B15 = 0 <\/p>\n<\/td>\n<td>\n<p>AI channel 63 is valid 12-bit resolution. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>B15 = 1 <\/p>\n<\/td>\n<td>\n<p>AI channel 63 is valid 14-bit resolution. <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Register<\/p>\n<\/td>\n<td>\n<p>Content<\/p>\n<\/td>\n<td>\n<p>Description<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"2\">\n<p>D4010 <\/p>\n<\/td>\n<td>\n<p>1\uff5e16 <\/p>\n<\/td>\n<td>\n<p>Low byte is used to define the times of average for AI channel 0. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>1\uff5e16 <\/p>\n<\/td>\n<td>\n<p>High byte is used to define the times of average for AI channel 1. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p> \u25cf <br \/> \u25cf <br \/> \u25cf <br \/> \u25cf <\/p>\n<\/td>\n<td>\n<p> \u25cf <br \/> \u25cf <br \/> \u25cf <br \/> \u25cf<\/p>\n<\/td>\n<td>\n<p> \u25cf <br \/> \u25cf <br \/> \u25cf <br \/> \u25cf<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"2\">\n<p>D4041 <\/p>\n<\/td>\n<td>\n<p>1\uff5e16 <\/p>\n<\/td>\n<td>\n<p>Low byte is used to define the times of average for AI channel 62. <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>1\uff5e16 <\/p>\n<\/td>\n<td>\n<p>High byte is used to define the times of average for AI channel 63. <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>\u203b The default of AI data format is 14-bit resolution, valid 12-bit, and times of average is 1. <\/p>\n<p>\u203b The legal setting value for times of average is 1\uff5e16, if it is not the value <strong>:<\/strong><\/p>\n<p> The default for times of average is 1 when it is valid 12-bit resolution.  The default for times of average is 8 when it is valid 14-bit resolution. <\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>18.1.8Tacking on the OFFSET Mode Input <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p> For the process of input for signal source of offset mode (take 4\uff5e20mA input for example), the user can set A\/D input range to be 0 \uff5e20mA, convert the IR value to unipolar (0 \uff5e16383), lessen the offset (4mA) value (16383&#215;4\/20=3276), then times the maximum input amount (20mA), and divide by the maximum span (4mA\uff5e20mA); and it can acquire the offset input conversion from 4mA\uff5e20mA reflect to 0\uff5e16383, the procedure is as follows <strong>:<\/strong><\/p>\n<p>a. Set the A\/D input range of analogue input module to be 0\uff5e20mA.<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>b. Add the IR (R3840\uff5eR3903) value with <\/p>\n<\/td>\n<td>\n<p>\uff0a8192 and then store it into register Rn (the value of Rn is 0\uff5e16383).<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"2\">\n<p>c. Deduct 3276 (16383x 20 4) from value of register Rn, and store the calculated value back to register Rn; if the value is <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p> negative, clear the content of register Rn to 0 (the value of Rn is 0\uff5e13107). <\/p>\n<p>d. The value of register Rn times 20 and then divide by 16 (Rn x 16 20), and it will convert the 4mA\uff5e20mA input to <\/p>\n<p>range of 0\uff5e16383.<\/p>\n<p>e. To sum up the items from a\uff5ed, the mathematical equation is as follows\uff1a<\/p>\n<p>Offset mode conversion value =\uff3bIR+8192(or 0) \u2212\uff0816383\u00d720 4\uff09\uff3d\u00d716 20\uff1bvalue is 0\uff5e16383 <\/p>\n<p>\u203b Special to 4\uff5e20 mA Offset mode, you can use FUN32 to substitute for processing above, but another offset mode <\/p>\n<p>please refer to above processing. <\/p>\n<p>\uff0anote <strong>: <\/strong>Step b \u201cAdd 8192\u201d is means input code setting in bipolar mode( JP1 setting in position B). If input code setting in <\/p>\n<p>unipolar mode (JP1 setting in position U) then you don\u2019t have to \u201cAdd 8192\u201d.<\/p>\n<p>Using Linear Conversion(FUN33) reading on 4\uff5e20mA OFFSET mode <\/p>\n<p> Except using the above mathematical methods and FUN32 to read 4~20mA analog reading conversion, when the OS version is later than 4.08 (including), you may use linear conversion instruction (FUN33) to read 4~20mA conversion input parameters. <\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<td>\n<p>\u2022 When M0 is \u201cON\u201d, it will continuous perform <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"5\"><\/td>\n<td rowspan=\"5\"><\/td>\n<td rowspan=\"5\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-363.png\" \/><\/p>\n<\/td>\n<td rowspan=\"5\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-364.png\" \/><\/p>\n<\/td>\n<td rowspan=\"5\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-365.png\" \/><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-366.png\" \/><\/p>\n<\/td>\n<td rowspan=\"5\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-367.png\" \/><\/p>\n<\/td>\n<td rowspan=\"5\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-368.png\" \/><\/p>\n<\/td>\n<td>\n<p>6 registers of conversion starting from R0, <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>where R1000 is the starting address of the <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>table of the conversion parameters, and the <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>corresponding values will be stored into <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>R50\uff5eR55. <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>The converted result is in below: <br \/>\tTs <\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p> R1000 <\/p>\n<\/td>\n<td>\n<p> 3276<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>R1001 <\/p>\n<\/td>\n<td>\n<p> 16383 <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>R1002 <\/p>\n<\/td>\n<td>\n<p> 0 <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>R1003 <\/p>\n<\/td>\n<td>\n<p> 16383 <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p> S                     D                    <\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>R0<\/p>\n<\/td>\n<td>\n<p>0 <\/p>\n<\/td>\n<td><\/td>\n<td>\n<p>R50<\/p>\n<\/td>\n<td>\n<p>-4094 <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p> R1<\/p>\n<\/td>\n<td>\n<p>3000 <\/p>\n<\/td>\n<td><\/td>\n<td>\n<p>R51<\/p>\n<\/td>\n<td>\n<p>-345 <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>R2<\/p>\n<\/td>\n<td>\n<p>6000 <\/p>\n<\/td>\n<td><\/td>\n<td>\n<p>R52<\/p>\n<\/td>\n<td>\n<p>3405 <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>R3<\/p>\n<\/td>\n<td>\n<p>9000 <\/p>\n<\/td>\n<td>\n<p>\u00d6<\/p>\n<\/td>\n<td>\n<p>R53<\/p>\n<\/td>\n<td>\n<p>7155 <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>R4<\/p>\n<\/td>\n<td>\n<p>12000 <\/p>\n<\/td>\n<td><\/td>\n<td>\n<p>R54<\/p>\n<\/td>\n<td>\n<p>10904<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>R5<\/p>\n<\/td>\n<td>\n<p>16383 <\/p>\n<\/td>\n<td><\/td>\n<td>\n<p>R55<\/p>\n<\/td>\n<td>\n<p>16383<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>18.2 FBs-4DA\/2DA Analog Output Module <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>FBs-4DA and FBs-2DA are two of the analog output modules of FATEK FBs series PLC. They provide 4 and 2 channels 14 bits D\/A output respectively. Base on the different jumper settings it can provide varieties of current or voltage output signal. The output code can be configured as unipolar or bipolar which makes the relation of output code and real output signal more intuitive. For safety, the output signal will be automatically forced to zero(0V or 0mA) when the module is not serviced by CPU for 0.5 second. <\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p> 18.2.1 Specifications of FBs-4DA\/2DA <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td colspan=\"3\">\n<p>Item <\/p>\n<\/td>\n<td>\n<p>Specifications <\/p>\n<\/td>\n<td>\n<p>Remark <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"3\">\n<p>Total Channel <\/p>\n<\/td>\n<td>\n<p>4 Channel\uff08FBs-4DA\uff09\u30012 Channel\uff08FBs-2DA\uff09<\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td colspan=\"3\">\n<p>Digital Output Value <\/p>\n<\/td>\n<td>\n<p>\u22128192\uff5e+8191(Bipolar) or 0\uff5e16383(Unipolar) <\/p>\n<\/td>\n<td rowspan=\"5\">\n<p>*\uff1aIt means the default \tsetting<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"4\">\n<p> Span <br \/> Of <br \/> Analog <\/p>\n<p> output <\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>Bipolar* <\/p>\n<\/td>\n<td>\n<p> *10V <\/p>\n<\/td>\n<td>\n<p>*1. Voltage\uff1a\u221210\uff5e10V \t5. Current\uff1a\u221220\uff5e20mA<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p> 5V <\/p>\n<\/td>\n<td>\n<p>2. Voltage\uff1a\u22125\uff5e5V \t6. Current\uff1a\u221210\uff5e10mA<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"2\">\n<p>Unipolar <\/p>\n<\/td>\n<td>\n<p> 10V <\/p>\n<\/td>\n<td>\n<p>3. Voltage\uff1a0\uff5e10V \t7. Current\uff1a0\uff5e20mA <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p> 5V <\/p>\n<\/td>\n<td>\n<p>4. Voltage\uff1a0\uff5e5V \t8. Current\uff1a0\uff5e10mA <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"3\">\n<p>Resolution <\/p>\n<\/td>\n<td>\n<p>14 bits <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td colspan=\"3\">\n<p>Finest resolution <\/p>\n<\/td>\n<td>\n<p>0.3mV(Voltage)\u30010.61\u00b5A(Current) <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td colspan=\"3\">\n<p>I\/O Points Occupied <\/p>\n<\/td>\n<td>\n<p>4(4DA) or 2(2DA) OR(Output register) <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td colspan=\"3\">\n<p>Accuracy <\/p>\n<\/td>\n<td>\n<p>Within \u00b11% of full scale <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td colspan=\"3\">\n<p>Conversion Time <\/p>\n<\/td>\n<td>\n<p>Updated each scan <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td colspan=\"3\">\n<p>Maximum accommodation for resistance loading <\/p>\n<\/td>\n<td>\n<p>Voltage\uff1a500\u2126\uff5e1M\u2126 <br \/>Current\uff1a0\u2126\uff5e500\u2126 <\/p>\n<\/td>\n<td>\n<p>The deviation will be <br \/>enlarged if exceeding this range <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"3\">\n<p>Isolation <\/p>\n<\/td>\n<td>\n<p>Transformer(Power) and photocouple(Signal) <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td colspan=\"3\">\n<p>Indicator(s) <\/p>\n<\/td>\n<td>\n<p>5VPWR LED <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td colspan=\"3\">\n<p>Internal Power Consumption <\/p>\n<\/td>\n<td>\n<p>5V\u300120mA <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td colspan=\"3\">\n<p>Operating Temperature <\/p>\n<\/td>\n<td>\n<p>0\uff5e60 \u2103<\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td colspan=\"3\">\n<p>Storage Temperature <\/p>\n<\/td>\n<td>\n<p>-20\uff5e80 \u2103<\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td colspan=\"3\">\n<p>External power supply <\/p>\n<\/td>\n<td>\n<p>24V-15%\/+20%\u3001120mA(4DA)\u300170mA(2DA) <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td colspan=\"3\">\n<p>Dimensions <\/p>\n<\/td>\n<td>\n<p>40(W)x90(H)x80(D) mm <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-369.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-370.png\" \/><\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p> 18.2.2The Procedure of Using FBs-4DA\/2DA Analog Output Module <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>Start <\/p>\n<p>Set the I\/O voltage\/current (V\/I), polarity (B\/U), and the V\/I <\/p>\n<p>range of each point before installation. Connect FBs-4DA\/2DA to the expansion interface on PLC in series and connect an external 24VDC source and analog output wires to the module. <\/p>\n<p>Directly fill the output value into the analogue output registers R3904\uff5eR3967 to acquire the corresponding analogue output span of CH0\uff5eCH63 from output module. <\/p>\n<p>End <\/p>\n<p>&#8212;&#8212;-Please refer to section 18.2.4 for hardware explanation.<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p> 18.2.3 Address Allocation of FBs-PLC Analog Outputs <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>FBs-4DA\/2DA Provides 4 points of outputs(4DA) or 2 points of outputs(2DA). The I\/O addressing of output is beginning from the module closest to main unit; it is orderly numbered as CH0\uff5eCH1 (1st module), CH2\uff5eCH3 (2nd module), CH4\uff5eCH5 (3rd module)\u2026\u2026 and increased with occurring order number, which reaches 64 points in total, and they are corresponding to the respective internal analogue output registers (so called OR register) R3904\uff5eR3967.  User needs only to expand connecting FBs-DA modules through expansion interface, and main unit will automatically detect the quantity of the outputs and send out the value to corresponding output of each DA modules.  The following table is detailed OR registers (R3904\uff5eR3967) corresponding to the expansion analogue outputs (CH0\uff5eCH63). WinProladder will automatically detect and calculate the ORs on the system after connecting to the PLC. Users may refer to the I\/O Module Number Configuration provided by WinProladder in order to find out the exact I\/O address of each expansion module to facilitate programming.<\/p>\n<p> I\/O allocation of FBs-2DA <\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Numeric Output <\/p>\n<\/td>\n<td colspan=\"2\">\n<p>Contents (CH0\uff5eCH63) <\/p>\n<\/td>\n<td>\n<p>Output lable <\/p>\n<\/td>\n<td rowspan=\"3\">\n<p>FBs-2DA <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Register\uff08OR\uff09<\/p>\n<\/td>\n<td colspan=\"2\">\n<p>B 1 5 B1 4B 1 3 B1 2 B 11 B 1 0 B9 B 8 B 7 B 6 B 5 B 4 B3 B 2 B 1 B 0<\/p>\n<\/td>\n<td>\n<p>Of FBs-2DA <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p> OR+0 <\/p>\n<\/td>\n<td colspan=\"2\">\n<p>\uff0a\uff0aB 1 3          CH0output valueB 0<\/p>\n<\/td>\n<td>\n<p>CH0 <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p> OR+1 <\/p>\n<\/td>\n<td>\n<p>\uff0a\uff0a<\/p>\n<\/td>\n<td>\n<p>CH1output value<\/p>\n<\/td>\n<td>\n<p>CH1 <\/p>\n<\/td>\n<td rowspan=\"3\">\n<p>FBs-2DA <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p> OR+2 <\/p>\n<\/td>\n<td>\n<p>\uff0a\uff0a<\/p>\n<\/td>\n<td>\n<p>CH2output value<\/p>\n<\/td>\n<td>\n<p>CH0 <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p> OR+3 <\/p>\n<\/td>\n<td>\n<p>\uff0a\uff0a<\/p>\n<\/td>\n<td>\n<p>CH3output value<\/p>\n<\/td>\n<td>\n<p>CH1 <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>Other modules <\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-371.png\" \/><\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>R3966<\/p>\n<\/td>\n<td>\n<p>Depends on module type<\/p>\n<\/td>\n<td>\n<p>CHX <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>R3967<\/p>\n<\/td>\n<td>\n<p>Depends on module type<\/p>\n<\/td>\n<td>\n<p>CHX <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>\uff0a \uff0a&#8212;&#8212;&#8212;&#8212; Unipolar code output (0\uff5e16383)\uff0cB14\u3001B15 = 00<\/p>\n<p> Bipolar code output (-8192\uff5e8191)\uff0cB14\u3001B15 = B13 <\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td colspan=\"3\">\n<p>I\/O allocation of FBs-4DA <\/p>\n<\/td>\n<td><\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td colspan=\"2\">\n<p>Numeric Output <\/p>\n<\/td>\n<td>\n<p>Contents (CH0\uff5eCH63) <\/p>\n<\/td>\n<td>\n<p>Output lable <\/p>\n<\/td>\n<td rowspan=\"4\">\n<p>FBs-4DA <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Register\uff08OR\uff09<\/p>\n<\/td>\n<td colspan=\"2\">\n<p>B 1 5 B1 4B 1 3 B1 2 B 11 B 1 0 B9 B 8 B 7 B 6 B 5 B 4 B3 B 2 B 1 B 0<\/p>\n<\/td>\n<td>\n<p>Of FBs-4DA<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p> OR+0 <\/p>\n<\/td>\n<td colspan=\"2\">\n<p>\uff0a\uff0aB 1 3           CH0output valueB 0<\/p>\n<\/td>\n<td>\n<p>CH0 <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p> OR+1 <\/p>\n<\/td>\n<td>\n<p>\uff0a\uff0a<\/p>\n<\/td>\n<td>\n<p> CH1output value<\/p>\n<\/td>\n<td>\n<p>CH1 <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p> OR+2 <\/p>\n<\/td>\n<td>\n<p>\uff0a\uff0a<\/p>\n<\/td>\n<td>\n<p> CH2output value<\/p>\n<\/td>\n<td>\n<p>CH2 <\/p>\n<\/td>\n<td rowspan=\"3\">\n<p>Other modules <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p> OR+3 <\/p>\n<\/td>\n<td>\n<p>\uff0a\uff0a<\/p>\n<\/td>\n<td>\n<p> CH3output value<\/p>\n<\/td>\n<td>\n<p>CH3 <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"2\">\n<p>R3964 <\/p>\n<\/td>\n<td>\n<p>Depends on module type<\/p>\n<\/td>\n<td>\n<p>CHX <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>R3965 <\/p>\n<\/td>\n<td>\n<p>Depends on module type<\/p>\n<\/td>\n<td>\n<p>CHX <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>R3966 <\/p>\n<\/td>\n<td>\n<p>Depends on module type<\/p>\n<\/td>\n<td>\n<p>CHX <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>R3967 <\/p>\n<\/td>\n<td>\n<p>Depends on module type<\/p>\n<\/td>\n<td>\n<p>CHX <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-372.png\" \/><\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>18.2.4 FBs-2DA \/4DA Hardware Description <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td rowspan=\"2\">\n<p>2<\/p>\n<\/td>\n<td>\n<p>1<\/p>\n<\/td>\n<td>\n<p>6<\/p>\n<\/td>\n<td>\n<p>7<\/p>\n<\/td>\n<td colspan=\"2\">\n<p>8<\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>2<\/p>\n<\/td>\n<td>\n<p>1<\/p>\n<\/td>\n<td>\n<p>6<\/p>\n<\/td>\n<td>\n<p>7<\/p>\n<\/td>\n<td colspan=\"2\">\n<p>8<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>24V IN<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>AG<\/strong><\/p>\n<\/td>\n<td colspan=\"2\">\n<p><strong>O0+ <\/strong>\t<strong>O1+<\/strong><\/p>\n<p><strong>O0-<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>O1-<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>24V IN<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>AG<\/strong><\/p>\n<\/td>\n<td colspan=\"2\">\n<p><strong>O0+ <\/strong>\t<strong>O1+<\/strong><\/p>\n<p><strong>O0-<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>O1-<\/strong><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><strong>V I UB5V 10V <\/strong>\t<strong>V I UB 5V 10V<\/strong><\/p>\n<p>4 \t4<\/p>\n<p><strong>POW POW<\/strong><\/p>\n<p>3 3<\/p>\n<p><strong>FBs-2DA FBs-4DA<\/strong><\/p>\n<p><strong>O2+ <\/strong>\t<strong>O3+<\/strong><\/p>\n<p><strong>O2-<\/strong>\t<strong>O3-<\/strong><\/p>\n<p>5 \t5<\/p>\n<p>9 10<\/p>\n<p>FBS-2DA \tFBS-4DA<\/p>\n<p>\u25cb1External power input terminal\uff1aPower supply of analogue circuit for this module, the voltage can be 24VDC\u00b120% and <\/p>\n<p>should be supplied with 4W of power at least.<\/p>\n<p>\u25cb2Protecting ground terminal\uff1aConnect to the shielding signal cable.<\/p>\n<p>\u25cb3Expansion input cable\uff1aIt should be connected to the front expansion unit, or the expansion output of main unit.<\/p>\n<p>\u25cb4Expansion output connector\uff1aProvides the connection for next expansion unit.<\/p>\n<p>\u25cb5Power indicator\uff1aIt indicates whether the power supply at analogue circuit and external input power source are <\/p>\n<p>normal.<\/p>\n<p>\u25cb6AG Ground\uff1aNo connection is needed in general; except when the common mode signal is too high. See examples <\/p>\n<p>overleaf for details.<\/p>\n<p>\u25cb7\u3001\u25cb8\uff1aOutput terminal of CH0\uff5eCH1.<\/p>\n<p>\u25cb9\u3001\u25cb10 \uff1aOutput terminal of CH2\uff5eCH3. <\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-373.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-374.png\" \/><\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p> 18.2.4.1 FBs-4DA\/2DA Hardware Jumper Setting <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>CH0<\/p>\n<\/td>\n<td>\n<p>CH0<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td colspan=\"2\">\n<p>V<\/p>\n<\/td>\n<td>\n<p>I<\/p>\n<\/td>\n<td>\n<p>CH1<\/p>\n<\/td>\n<td>\n<p>CH1<\/p>\n<\/td>\n<td rowspan=\"5\">\n<p>JPB<\/p>\n<\/td>\n<td>\n<p>B<\/p>\n<\/td>\n<td>\n<p>U<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-375.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-376.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-377.png\" \/><\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>JPA<\/p>\n<\/td>\n<td rowspan=\"3\">\n<p>CH2<\/p>\n<\/td>\n<td rowspan=\"3\">\n<p>10V<\/p>\n<\/td>\n<td rowspan=\"3\">\n<p> 5V<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"3\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-378.png\" \/><\/p>\n<\/td>\n<td rowspan=\"3\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-379.png\" \/><\/p>\n<\/td>\n<td rowspan=\"3\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-380.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>CH2<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>CH3<\/p>\n<\/td>\n<td>\n<p>CH3<\/p>\n<\/td>\n<td>\n<p>JP1<\/p>\n<\/td>\n<td>\n<p>U<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>B<\/p>\n<p> FBs-4DA\/2DA Jumper location <\/p>\n<p>Output code format selection (JP1) <\/p>\n<p> Users can select between unipolar and bipolar codes. The output range of unipolar codes and bipolar codes is 0~16383 and \u20138192~8191, respectively. The two extreme values of these formats correspond to the lowest and highest output signal values, respectively (see table below). In general, the output code format is selected according to the form of output signals; i.e. unipolar codes for unipolar output signals; and bipolar codes for bipolar output signals. In doing so, their correlations will become more heuristics. Yet, as the format of output code on all channels is selected from JP1, it is the user\u2019s choice to select unipolar or bipolar codes if both are used on different channels. See diagram above for location of JP1 <strong>:<\/strong><\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Output Code Format<\/p>\n<\/td>\n<td>\n<p>JP1 Setting<\/p>\n<\/td>\n<td>\n<p> Output Value Range<\/p>\n<\/td>\n<td>\n<p>Corresponding Input Signals<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Bipolar<\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-381.png\" \/><\/p>\n<\/td>\n<td>\n<p> -8192\uff5e8191 <\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>-10V\uff5e10V(-20mA\uff5e20mA)  -5V\uff5e5V(-10mA\uff5e10mA) \t 0V\uff5e10V(0mA\uff5e20mA) \t 0V\uff5e5V(0mA\uff5e10mA) <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Unipolar<\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-382.png\" \/><\/p>\n<\/td>\n<td>\n<p> 0\uff5e16383 <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-383.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-384.png\" \/><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-385.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-386.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-387.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-388.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-389.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-390.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-391.png\" \/><\/p>\n<p> Output signal form setup (JPA&amp;JPB) <\/p>\n<p> Users can set the output signal form (voltage\/current) of individual channels; except the polarity and amplitude which <\/p>\n<p>are common. <\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p> Signal Form <\/p>\n<\/td>\n<td>\n<p> JPA (voltage\/current) Setting <\/p>\n<\/td>\n<td>\n<p> JPB (polarity\/amplitude) Setting <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p> 0V\uff5e10V <\/p>\n<p> -10V\uff5e10V <\/p>\n<p> 0V\uff5e5V <\/p>\n<p> -5V\uff5e5V <\/p>\n<p> 0mA\uff5e20mA <\/p>\n<p> -20mA\uff5e20mA <\/p>\n<p> 0mA\uff5e10mA <\/p>\n<p> -10mA\uff5e10mA <\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-392.png\" \/><\/p>\n<h4> 18.2.5 FBs-4DA\/2DA Output Circuit Diagram <\/h4>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td rowspan=\"2\">\n<p>FBs-4DA\/2DA<\/p>\n<\/td>\n<td rowspan=\"5\">\n<p>V<\/p>\n<\/td>\n<td rowspan=\"3\">\n<p>24V+<\/p>\n<\/td>\n<td colspan=\"3\">\n<p>Output<\/p>\n<\/td>\n<td rowspan=\"6\">\n<p>+<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"2\">\n<p>+<\/p>\n<\/td>\n<td colspan=\"2\" rowspan=\"2\">\n<p>24VDC<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>+15V<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"3\">\n<p>15V<\/p>\n<\/td>\n<td>\n<p>24V<\/p>\n<\/td>\n<td colspan=\"3\">\n<p>External power supply<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>O0+<\/p>\n<\/td>\n<td colspan=\"2\">\n<p>CH0 Voltage output<\/p>\n<\/td>\n<td>\n<p>V+<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>I<\/p>\n<\/td>\n<td>\n<p>O0<\/p>\n<\/td>\n<td colspan=\"3\">\n<p>V<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>Voltage Input<\/p>\n<p>FG<\/p>\n<p>AG<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td rowspan=\"2\">\n<p>V<\/p>\n<\/td>\n<td>\n<p>On+<\/p>\n<\/td>\n<td rowspan=\"3\">\n<p>CHn Current output<\/p>\n<\/td>\n<td>\n<p>I+<\/p>\n<\/td>\n<td rowspan=\"3\">\n<p>+<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"2\">\n<p>On<\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>I<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>I<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>Current Input<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Voltage\/<\/p>\n<\/td>\n<td>\n<p>Twisted pair with shielding<\/p>\n<\/td>\n<td>\n<p>FG<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>Current output <\/p>\n<p>selection<\/p>\n<p>n = 1 &#8212; 2DA<\/p>\n<p>n = 3 &#8212; 4DA<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-393.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-394.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-395.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-396.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-397.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-398.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-399.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-400.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-401.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-402.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-403.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-404.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-405.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-406.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-407.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-408.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-409.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-410.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-411.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-412.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-413.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-414.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-415.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-416.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-417.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-418.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-419.png\" \/><\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p> 18.2.6 FBs-4DA\/2DA Output Characteristics and Jumper Setting <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>Users can select the output ranges of FBs-4DA\/2DA from the jumpers described above, such as V\/I, U\/B (I\/O codes), U\/B (signal form), 5V\/10V, etc. The Output signals conversion characteristics of these settings are illustrated below. Users can adjust different Output forms by coordinating the conversion curve with various V\/I (voltage\/current) Output settings. See Section 18.2.4 for details of V\/I settings<strong> : <\/strong><\/p>\n<p>Diagram 1\uff1aBipolar 10V\uff0820mA\uff09Span <\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td rowspan=\"2\">\n<p>Output <br \/>Range <\/p>\n<\/td>\n<td>\n<p>Voltage<\/p>\n<\/td>\n<td>\n<p>\u221210V\uff5e10V <\/p>\n<\/td>\n<td rowspan=\"2\"><\/td>\n<td rowspan=\"2\">\n<p>Jumper Setting<\/p>\n<\/td>\n<td rowspan=\"2\">\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td rowspan=\"2\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-420.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-421.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-422.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-423.png\" \/><\/p>\n<\/td>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<td rowspan=\"2\"><\/td>\n<td><\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-424.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Current<\/p>\n<\/td>\n<td>\n<p>\u221220mA\uff5e20mA<\/p>\n<\/td>\n<td><\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-425.png\" \/><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-426.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-427.png\" \/><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-428.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-429.png\" \/><\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td rowspan=\"2\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-430.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-431.png\" \/><\/p>\n<\/td>\n<td rowspan=\"3\"><\/td>\n<td rowspan=\"3\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-432.png\" \/><\/p>\n<\/td>\n<td rowspan=\"3\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-433.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-434.png\" \/><\/p>\n<\/td>\n<td rowspan=\"3\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-435.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-436.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-437.png\" \/><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-438.png\" \/><\/p>\n<\/td>\n<td rowspan=\"3\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-439.png\" \/><\/p>\n<\/td>\n<td rowspan=\"3\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-440.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"2\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-441.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-442.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-443.png\" \/><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-444.png\" \/><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>Diagram 2\uff1aBipolar 5V\uff0810mA\uff09Span <\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td rowspan=\"2\">\n<p>Output <br \/>Range <\/p>\n<\/td>\n<td>\n<p>Voltage<\/p>\n<\/td>\n<td>\n<p>\u22125V\uff5e5V <\/p>\n<\/td>\n<td rowspan=\"2\"><\/td>\n<td rowspan=\"2\">\n<p>Jumper Setting<\/p>\n<\/td>\n<td rowspan=\"2\">\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td rowspan=\"2\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-445.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-446.png\" \/><\/p>\n<\/td>\n<td rowspan=\"2\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-447.png\" \/><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-448.png\" \/><\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-449.png\" \/><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<td rowspan=\"2\"><\/td>\n<td><\/td>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-450.png\" \/><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-451.png\" \/><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Current<\/p>\n<\/td>\n<td>\n<p>\u221210mA\uff5e10mA<\/p>\n<\/td>\n<td><\/td>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-452.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-453.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-454.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-455.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-456.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-457.png\" \/><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-458.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-459.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-460.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-461.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-462.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-463.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-464.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-465.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-466.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-467.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-468.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-469.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-470.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-471.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-472.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-473.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-474.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-475.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-476.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-477.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-478.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-479.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-480.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-481.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-482.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-483.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-484.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-485.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-486.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-487.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-488.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-489.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-490.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-491.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-492.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-493.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-494.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-495.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-496.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-497.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-498.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-499.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-500.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-501.png\" \/><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-502.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-503.png\" \/><\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td rowspan=\"2\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-504.png\" \/><\/p>\n<\/td>\n<td rowspan=\"3\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-505.png\" \/><\/p>\n<\/td>\n<td rowspan=\"3\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-506.png\" \/><\/p>\n<\/td>\n<td rowspan=\"3\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-507.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-508.png\" \/><\/p>\n<\/td>\n<td rowspan=\"3\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-509.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-510.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-511.png\" \/><\/p>\n<\/td>\n<td rowspan=\"3\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-512.png\" \/><\/p>\n<\/td>\n<td rowspan=\"3\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-513.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"2\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-514.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-515.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-516.png\" \/><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>Diagram 3\uff1aUnipolar 10V\uff0820mA\uff09Span <\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td rowspan=\"2\">\n<p>Output <br \/>Range <\/p>\n<\/td>\n<td>\n<p>Voltage<\/p>\n<\/td>\n<td>\n<p>0V\uff5e10V <\/p>\n<\/td>\n<td rowspan=\"2\"><\/td>\n<td rowspan=\"2\">\n<p>Jumper Setting<\/p>\n<\/td>\n<td rowspan=\"2\">\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td rowspan=\"2\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-517.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-518.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-519.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-520.png\" \/><\/p>\n<\/td>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<td rowspan=\"2\"><\/td>\n<td><\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-521.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Current<\/p>\n<\/td>\n<td>\n<p>0mA\uff5e20mA <\/p>\n<\/td>\n<td><\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-522.png\" \/><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-523.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-524.png\" \/><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-525.png\" \/><\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td rowspan=\"2\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-526.png\" \/><\/p>\n<\/td>\n<td rowspan=\"3\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-527.png\" \/><\/p>\n<\/td>\n<td rowspan=\"3\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-528.png\" \/><\/p>\n<\/td>\n<td rowspan=\"3\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-529.png\" \/><\/p>\n<\/td>\n<td rowspan=\"3\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-530.png\" \/><\/p>\n<\/td>\n<td rowspan=\"3\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-531.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-532.png\" \/><\/p>\n<\/td>\n<td rowspan=\"3\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-533.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-534.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-535.png\" \/><\/p>\n<\/td>\n<td rowspan=\"3\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-536.png\" \/><\/p>\n<\/td>\n<td rowspan=\"3\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-537.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"2\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-538.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-539.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-540.png\" \/><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-541.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-542.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-543.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-544.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-545.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-546.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-547.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-548.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-549.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-550.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-551.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-552.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-553.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-554.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-555.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-556.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-557.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-558.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-559.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-560.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-561.png\" \/><\/p>\n<p>Diagram 4\uff1aUnipolar 5V\uff0810mA\uff09Span <\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td colspan=\"7\">\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Output <br \/>Range <\/p>\n<\/td>\n<td rowspan=\"3\">\n<p>Current<\/p>\n<\/td>\n<td rowspan=\"3\">\n<p> 0mA\uff5e10mA <\/p>\n<\/td>\n<td><\/td>\n<td>\n<p>Jumper Setting<\/p>\n<\/td>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td rowspan=\"2\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-562.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-563.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-564.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-565.png\" \/><\/p>\n<\/td>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<td><\/td>\n<td rowspan=\"3\"><\/td>\n<td colspan=\"6\" rowspan=\"3\">\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-566.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-567.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-568.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-569.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<\/tr>\n<tr>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-570.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-571.png\" \/><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-572.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-573.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"4\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-574.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-575.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-576.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-577.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-578.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-579.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-580.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-581.png\" \/><\/p>\n<\/td>\n<td colspan=\"4\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-582.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-583.png\" \/><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-584.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-585.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-586.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-587.png\" \/><\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>18.2.7Tracking on the OFFSET Mode Output <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p> For the process of output for signal source of offset mode (take 4~20mA output for example), when the OS version is later than 4.08 (including), you may use linear conversion instruction (FUN33) to read 4~20mA conversion output parameters. <\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<td><\/td>\n<td>\n<p>\u2022When M0 is \u201cON\u201d, it will continuous perform 6 <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"5\"><\/td>\n<td rowspan=\"5\"><\/td>\n<td rowspan=\"5\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-588.png\" \/><\/p>\n<\/td>\n<td rowspan=\"5\">\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-589.png\" \/><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-590.png\" \/><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-591.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-592.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-593.png\" \/><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-594.png\" \/><\/p>\n<\/td>\n<td>\n<p>registers of conversion starting from R0, <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>where R1000 is the starting address of the <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>table of the conversion parameters, and the <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>corresponding values will be stored into <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>R50\uff5eR55. <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>The converted result is in below: <br \/> Ts <\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p> R1000 <br \/>R1001 <br \/>R1002 <br \/>R1003 <\/p>\n<\/td>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p> 0 <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p> 16383 <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p> 3276<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p> 16383 <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p> S                     D                    <\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>R0<\/p>\n<\/td>\n<td rowspan=\"6\">\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>0 <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>3000 <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>6000 <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>9000 <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>12000 <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>16383 <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<td rowspan=\"6\">\n<p>\u00d6<\/p>\n<\/td>\n<td>\n<p>R50<\/p>\n<\/td>\n<td rowspan=\"6\">\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>3276 <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>5676 <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>8076 <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>10476<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>12876<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>16383<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p> R1<\/p>\n<\/td>\n<td>\n<p>R51<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>R2<\/p>\n<\/td>\n<td>\n<p>R52<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>R3<\/p>\n<\/td>\n<td>\n<p>R53<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>R4<\/p>\n<\/td>\n<td>\n<p>R54<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>R5<\/p>\n<\/td>\n<td>\n<p>R55<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h3>18.3 FBs-4A2D Analog Input\/Output Module <\/h3>\n<p>FBs-4A2D is one of the analog I\/O modules of FATEK FBs series PLC. For analog output it provides 2 channels of 14 bit D\/A output. Base on the different jumper settings it can provide varieties of current or voltage output signal. The output code can be configured as unipolar or bipolar which makes the relation of output code and real output signal more intuitive. For safety, the output signal will be automatically forced to zero(0V or 0mA) when the module is not serviced by CPU for 0.5 second. <\/p>\n<p>For analog input it provides 4 channels A\/D input with 12 or 14 bits effective resolution. Base on the different jumper settings it can measure the varieties of current or voltage signal. The reading value is represented by a 14 bit value no matter the effective resolution is set to 12 or 14 bits The output code also can be configured as unipolar or bipolar which makes the relation of input code and real input signal more intuitive.. In order to filter out the field noise imposed on the signal, it also provides the average of sample input function. <\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p> 18.3.1 Specifications of FBs-4A2D <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p> Analog output specifications <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td colspan=\"3\">\n<p>Item <\/p>\n<\/td>\n<td>\n<p>Specifications <\/p>\n<\/td>\n<td>\n<p>Remark <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"3\">\n<p> Output Channel<\/p>\n<\/td>\n<td>\n<p>2 Channel (2DA) <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td colspan=\"3\">\n<p>Digital Output Value<\/p>\n<\/td>\n<td>\n<p>\u22128192\uff5e+8191(Bipolar) or 0\uff5e16383(Unipolar) <\/p>\n<\/td>\n<td rowspan=\"5\">\n<p>*\uff1aIt means the default \tsetting<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"4\">\n<p>\t\tSpan \t Of <br \/> Analog <\/p>\n<p> output<\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>Bipolar*<\/p>\n<\/td>\n<td>\n<p>*10V <\/p>\n<\/td>\n<td>\n<p>*1. Voltage\uff1a\u221210\uff5e10V \t 5. Current\uff1a\u221220\uff5e20mA <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>5V <\/p>\n<\/td>\n<td>\n<p>2. Voltage\uff1a\u22125\uff5e5V \t 6. Current\uff1a\u221210\uff5e10mA <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"2\">\n<p> Unipolar<\/p>\n<\/td>\n<td>\n<p>10V <\/p>\n<\/td>\n<td>\n<p>3. Voltage\uff1a0\uff5e10V \t 7. Current\uff1a0\uff5e20mA <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>5V <\/p>\n<\/td>\n<td>\n<p>4. Voltage\uff1a0\uff5e5V \t 8. Current\uff1a0\uff5e10mA <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"3\">\n<p>Resolution <\/p>\n<\/td>\n<td>\n<p>14 bits <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td colspan=\"3\">\n<p>Finest resolution <\/p>\n<\/td>\n<td>\n<p>0.3mV(Voltage)\u30010.61\u00b5A(Current) <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td colspan=\"3\">\n<p>I\/O Points Occupied <\/p>\n<\/td>\n<td>\n<p>2 OR(Output register) <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td colspan=\"3\">\n<p>Accuracy <\/p>\n<\/td>\n<td>\n<p>Within \u00b11% of full scale <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td colspan=\"3\">\n<p>Conversion Time <\/p>\n<\/td>\n<td>\n<p>Updated each scan <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td colspan=\"3\">\n<p>Maximum accommodation for resistance loading <\/p>\n<\/td>\n<td>\n<p>Voltage\uff1a500\u2126\uff5e1M\u2126 <br \/>Current\uff1a0\u2126\uff5e300\u2126 <\/p>\n<\/td>\n<td>\n<p>The deviation will be <br \/>enlarged if exceeding this range <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p> Analog input specifications <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td colspan=\"3\">\n<p>Item <\/p>\n<\/td>\n<td>\n<p>Specifications <\/p>\n<\/td>\n<td>\n<p>Remark <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"3\">\n<p>Input Channel<\/p>\n<\/td>\n<td>\n<p>4 Channel (4AD) <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td colspan=\"3\">\n<p>Digital Input Value<\/p>\n<\/td>\n<td>\n<p>\u22128192\uff5e+8191or 0\uff5e16383(14bit) \u22122048\uff5e+2047or 0\uff5e4095(12bit) <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td rowspan=\"4\">\n<p> Span <br \/> Of <br \/> Analog  Input<\/p>\n<\/td>\n<td rowspan=\"2\">\n<p> Bipolar*<\/p>\n<\/td>\n<td>\n<p>*10V <\/p>\n<\/td>\n<td>\n<p>*10V *1. Voltage\uff1a\u221210\uff5e10V \t 5. Current\uff1a\u221220\uff5e20mA <\/p>\n<\/td>\n<td rowspan=\"4\">\n<p>*\uff1aIt means the default \tsetting<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>5V <\/p>\n<\/td>\n<td>\n<p>2. Voltage\uff1a\u22125\uff5e5V \t 6. Current\uff1a\u221210\uff5e10mA <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"2\">\n<p> Unipolar<\/p>\n<\/td>\n<td>\n<p>10V <\/p>\n<\/td>\n<td>\n<p>3. Voltage\uff1a0\uff5e10V \t 7. Current\uff1a0\uff5e20mA <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>5V <\/p>\n<\/td>\n<td>\n<p>4. Voltage\uff1a0\uff5e5V \t 8. Current\uff1a0\uff5e10mA <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"3\">\n<p>Resolution<\/p>\n<\/td>\n<td>\n<p>14 or 12 bit <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-595.png\" \/><\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Finest resolution <\/p>\n<\/td>\n<td>\n<p>Voltage\uff1a0.3mV <br \/>Current\uff1a0.61\u00b5A <\/p>\n<\/td>\n<td>\n<p>=Analog Input Signal\/ <br \/>16383(rounded the third decimal place) <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>I\/O Points Occupied<\/p>\n<\/td>\n<td>\n<p>4 IR(Input register) <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td>\n<p>Accuracy<\/p>\n<\/td>\n<td>\n<p>Within \u00b11% of full scale <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td>\n<p>Conversion Time<\/p>\n<\/td>\n<td>\n<p>Updated each scan <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td>\n<p>Maximum absolute input signal<\/p>\n<\/td>\n<td>\n<p>Voltage\uff1a\u00b115V\uff08max\uff09<br \/>Current\uff1a\u00b130mA\uff08max\uff09<\/p>\n<\/td>\n<td>\n<p>It may cause the <br \/>destruction to hardware if exceeds this value.<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Input resistance<\/p>\n<\/td>\n<td>\n<p>63.2K\u2126\uff08Voltage input\uff09\u3001250\u2126\uff08Current Input\uff09<\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>General specifications <\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Isolation <\/p>\n<\/td>\n<td>\n<p>Transformer(Power) and photocouple(Signal) <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td>\n<p>Indicator(s) <\/p>\n<\/td>\n<td>\n<p>5VPWR LED <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td>\n<p>Internal Power Consumption <\/p>\n<\/td>\n<td>\n<p>5V\u3001100mA <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td>\n<p>External power supply <\/p>\n<\/td>\n<td>\n<p>24V-15%\/+20%\u3001100mA <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td>\n<p>Operating Temperature <\/p>\n<\/td>\n<td>\n<p>0 ~ 60 \u2103<\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td>\n<p>Storage Temperature <\/p>\n<\/td>\n<td>\n<p>-20 ~ 80 \u2103<\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td>\n<p>Dimensions <\/p>\n<\/td>\n<td>\n<p>40(W)x90(H)x80(D) mm <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p> 18.3.2 The Procedure of Using FBs-4A2D Analog Input\/Output Module <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>Start <\/p>\n<p>Set the I\/O voltage\/current (V\/I), polarity (B\/U), and the V\/I <\/p>\n<p>range of each point before installation. Connect FBs-4A2D to the expansion interface on PLC in series and connect an external 24VDC source and analog output wires to the module. <\/p>\n<p>Analog Input <strong>:<\/strong> Directly read the value of the four corresponding IRs to obtain the analog input reading of CH0~CH3. <\/p>\n<p>Analog Output <strong>: <\/strong>Directly fill the output value into the analogue output registers R3904\uff5eR3967 to acquire the <\/p>\n<p>&#8212;&#8212;-Please refer to section 18.3.4 for hardware explanation.<\/p>\n<p>corresponding analogue output span of CH0\uff5eCH1 from <br \/>output module. <\/p>\n<p>End <\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-596.png\" \/><\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p> 18.3.3 Address Allocation of FBs-PLC Analog Inputs\/Outputs <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>FBs-4A2D offers 4 AD points and 2 DA points. The AD points number starts from the one nearest to the PLC, the number in order is CH0~CH3 (module 1); CH4~CH7 (module 2); CH8~CH11 (module 3); etc, accumulates in serial; i.e. add 4 to each module, the total is 64 points (CH0~CH63) corresponding top the value IRs inside the PLC (R3840~R3903), respectively. In DA point numbering, from the one nearest to the PLC, the number runs from CH0 through to CH63 in serial, the total is 64 points corresponding top the value ORs inside the PLC (R3904~R3967), respectively. After connecting FBs-4A2D to the expansion interface on the PLC, FBs-PLC will automatically detect the number of AD\/DA points. WinProladder will automatically detect and calculate the value IRs\/ORs on the system after connecting to the PLC. Users may refer to the I\/O Module Number Configuration provided by WinProladder in order to find out the exact I\/O address of each expansion module to facilitate programming (see I\/O Number Configuration, Section 12.6, WinProladder User\u2019s Manual for details). <\/p>\n<p> Address allocation of FBs-4A2D(Analog output) <\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p> Numeric Output <\/p>\n<\/td>\n<td colspan=\"2\">\n<p>Content of OR (CH0\uff5eCH63) <\/p>\n<\/td>\n<td>\n<p> Output <\/p>\n<\/td>\n<td rowspan=\"6\">\n<p>FBs-4A2D <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p> Register\uff08OR\uff09<\/p>\n<\/td>\n<td colspan=\"2\">\n<p> B 15 B 1 4B 1 3 B1 2 B 11 B 1 0 B9 B 8 B 7 B 6 B 5 B 4 B3 B 2 B 1 B 0<\/p>\n<\/td>\n<td>\n<p>lable<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>OR+0 <\/p>\n<\/td>\n<td>\n<p>\uff0a\uff0a<\/p>\n<\/td>\n<td>\n<p>B 1 3           CH0 output valueB 0<\/p>\n<\/td>\n<td>\n<p>CH0 <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>OR+1 <\/p>\n<\/td>\n<td>\n<p>\uff0a\uff0a<\/p>\n<\/td>\n<td>\n<p> CH1 output value<\/p>\n<\/td>\n<td>\n<p>CH1 <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>OR+2 <\/p>\n<\/td>\n<td colspan=\"2\" rowspan=\"2\">\n<p>Depends on module type<\/p>\n<\/td>\n<td>\n<p>CHX <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>OR+3 <\/p>\n<\/td>\n<td>\n<p>CHX <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>Other modules<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>R3966<\/p>\n<\/td>\n<td>\n<p>Depends on module type<\/p>\n<\/td>\n<td>\n<p>CHX <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>R3967<\/p>\n<\/td>\n<td>\n<p>Depends on module type<\/p>\n<\/td>\n<td>\n<p>CHX <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>\uff0a \uff0a&#8212;&#8212;&#8212;&#8212; Unipolar code output (0\uff5e16383)\uff0cB14\u3001B15 = 00 \tBipolar code output (-8192\uff5e8191)\uff0cB14\u3001B15 = B13<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-597.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-598.png\" \/><\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p> Address allocation of FBs-4A2D(Analog input) <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p> Numeric Input <\/p>\n<\/td>\n<td>\n<p>Content of IR (CH0\uff5eCH63)<\/p>\n<\/td>\n<td>\n<p>Input lable<\/p>\n<\/td>\n<td rowspan=\"4\">\n<p>FBs-4A2D <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p> Register\uff08IR\uff09<\/p>\n<\/td>\n<td>\n<p> B 15 B 1 4 B 1 3 B 1 2 B 11 B 1 0 B 9 B 8 B 7 B 6 B 5 B 4 B 3 B 2 B 1 B 0<\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>CH0 <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>IR+0 <\/p>\n<\/td>\n<td>\n<p> 14\/12 bit ; 14-bit , B14~ B15= B13 ; 12-bit, B12~ B15= B11<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>IR+1 <\/p>\n<\/td>\n<td>\n<p> 14\/12 bit ; 14-bit , B14~ B15= B13 ; 12-bit, B12~ B15= B11<\/p>\n<\/td>\n<td>\n<p>CH1 <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>IR+2 <\/p>\n<\/td>\n<td>\n<p> \u3003<\/p>\n<\/td>\n<td>\n<p>CH2 <\/p>\n<\/td>\n<td rowspan=\"3\">\n<p>Other modules<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>IR+3 <\/p>\n<\/td>\n<td>\n<p> \u3003<\/p>\n<\/td>\n<td>\n<p>CH3 <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>R3900 <\/p>\n<\/td>\n<td>\n<p>Depends on module type<\/p>\n<\/td>\n<td>\n<p>CHX <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>R3901 <\/p>\n<\/td>\n<td>\n<p>Depends on module type<\/p>\n<\/td>\n<td>\n<p>CHX <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>R3902 <\/p>\n<\/td>\n<td>\n<p> \u3003<\/p>\n<\/td>\n<td>\n<p>CHX <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>R3903 <\/p>\n<\/td>\n<td>\n<p> \u3003<\/p>\n<\/td>\n<td>\n<p>CHX <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<h4> 18.3.4 FBs-4A2D Hardware Description <\/h4>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>1<\/p>\n<\/td>\n<td>\n<p>6<\/p>\n<\/td>\n<td>\n<p>7<\/p>\n<\/td>\n<td>\n<p>8<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>\u203b FBs-4A2D contains 3 PCBs overlapping one <\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td rowspan=\"4\">\n<p>2<\/p>\n<\/td>\n<td colspan=\"5\" rowspan=\"2\">\n<p><strong>+ 24V IN &#8211;<\/strong><\/p>\n<\/td>\n<td rowspan=\"4\">\n<p><strong>O0+<\/strong><\/p>\n<\/td>\n<td rowspan=\"4\">\n<p><strong>O0-<\/strong><\/p>\n<\/td>\n<td rowspan=\"4\">\n<p><strong>O1+<\/strong><\/p>\n<\/td>\n<td rowspan=\"4\">\n<p><strong>O1-<\/strong><\/p>\n<\/td>\n<td>\n<p>another. The lowest one is the power supply <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"2\">\n<p>unit (isolated power supply). The middle one <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"5\">\n<p><strong>AG<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p><strong>VI<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>U<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>B<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>5V<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>10V<\/strong><\/p>\n<\/td>\n<td>\n<p>is the I\/O board (connectors are on this <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>layer). The upper one is the control board <\/p>\n<p>(control\/expansion I\/O connections) as <\/p>\n<p>described below.<strong>:<\/strong><\/p>\n<p>4<\/p>\n<p><strong>POW<\/strong><\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>3<\/p>\n<\/td>\n<td>\n<p><strong>FBs-4A2D<\/strong><\/p>\n<p><strong>I0+ <\/strong>\t<strong>I1+ <\/strong>\t<strong>I2+ I3+<\/strong><\/p>\n<p><strong>I0-I1-I2-<\/strong>\t<strong>I3-<\/strong><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>5<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>9<\/p>\n<\/td>\n<td>\n<p>10<\/p>\n<\/td>\n<td>\n<p>11<\/p>\n<\/td>\n<td>\n<p>12<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>Outlook of top view <\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-599.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-600.png\" \/><\/p>\n<p>\u25cb1External power input terminal \uff1aPower supply of analogue circuit for this module, the voltage can be 24VDC\u00b120% <\/p>\n<p>and should be supplied with 4W of power at least.<\/p>\n<p>\u25cb2Protecting ground terminal\uff1aConnect to the shielding of signal cable.<\/p>\n<p>\u25cb3Expansion input cable\uff1aIt should be connected to the front expansion unit, or the expansion output of main unit.<\/p>\n<p>\u25cb4Expansion output connector\uff1aProvides the connection for next expansion unit.<\/p>\n<p>\u25cb5Power indicator\uff1aIt indicates whether the power supply at analogue circuit and external input power source are <\/p>\n<p>normal.<\/p>\n<p>\u25cb6AG Ground\uff1aNo connection is needed in general; except when the common mode signal is too high. See examples <\/p>\n<p>overleaf for details.<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>\u25cb7\u3001\u25cb8\uff1aOutput terminal of CH0\uff5eCH1.<\/p>\n<p>\u25cb9\u3001\u25cb12 \uff1aInput terminal of CH0\uff5eCH3.<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p> 18.3.4.1 FBs-4A2D Hardware Jumper Setting <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>CH0<\/p>\n<\/td>\n<td>\n<p>CH0<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td rowspan=\"10\">\n<p>V<\/p>\n<\/td>\n<td rowspan=\"10\">\n<p>I<\/p>\n<\/td>\n<td>\n<p>B<\/p>\n<\/td>\n<td>\n<p>U<\/p>\n<\/td>\n<td rowspan=\"8\">\n<p>U<\/p>\n<\/td>\n<td rowspan=\"8\">\n<p>D\/A<\/p>\n<\/td>\n<td rowspan=\"5\">\n<p>V<\/p>\n<\/td>\n<td rowspan=\"5\">\n<p>I<\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>CH1<\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>CH1<\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>B<\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>U<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>10V<\/p>\n<\/td>\n<td>\n<p> 5V<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"6\">\n<p>JP1<\/p>\n<\/td>\n<td rowspan=\"6\">\n<p>B<\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>JPA<\/p>\n<\/td>\n<td colspan=\"2\">\n<p>JPB<\/p>\n<\/td>\n<td rowspan=\"8\">\n<p> 5V<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"2\" rowspan=\"2\">\n<p>10V<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"5\">\n<p>JP4<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"2\">\n<p>JP3<\/p>\n<\/td>\n<td colspan=\"2\" rowspan=\"3\">\n<p>JP5 ~ JP8<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"2\">\n<p>U<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"2\" rowspan=\"3\">\n<p>B<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"2\">\n<p>JP1<\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>B<\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>U<\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>A\/D<\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>I<\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>V<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>5V<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>10V<\/p>\n<p>Pin Layout in Control Board (open top cover)<\/p>\n<p>\u25cf (Analog output) <\/p>\n<p> 1. Output code format selection (JP1) <\/p>\n<p>Pin Layout on I\/O Board (Remove Control Board)<\/p>\n<p>Users can select between unipolar and bipolar codes. The output range of unipolar codes and bipolar codes is 0~16383 and \u20138192~8191, respectively. The two extreme values of these formats correspond to the lowest and highest output signal values, respectively (see table below). In general, the output code format is selected according to the form <\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-601.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-602.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-603.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-604.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-605.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-606.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-607.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-608.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-609.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-610.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-611.png\" \/><\/p>\n<p>of output signals; i.e. unipolar codes for unipolar output signals; and bipolar codes for bipolar output signals. In doing so, their correlations will become more heuristics. Yet, as the format of output code on all channels is selected from JP1, it is the user\u2019s choice to select unipolar or bipolar codes if both are used on different channels. See diagram above for location of JP1 <strong>:<\/strong><\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Output Code Format<\/p>\n<\/td>\n<td>\n<p>JP1 Setting<\/p>\n<\/td>\n<td>\n<p>Output Value Range<\/p>\n<\/td>\n<td>\n<p>Corresponding Input Signals<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Bipolar<\/p>\n<\/td>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-612.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-613.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-614.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-615.png\" \/><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<td>\n<p> -8192\uff5e8191 <\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>-10V\uff5e10V(-20mA\uff5e20mA)  -5V\uff5e5V(-10mA\uff5e10mA) \t 0V\uff5e10V(0mA\uff5e20mA) \t 0V\uff5e5V(0mA\uff5e10mA) <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Unipolar<\/p>\n<\/td>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-616.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-617.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-618.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-619.png\" \/><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<td>\n<p> 0\uff5e16383 <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-620.png\" \/>\t<img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-621.png\" \/><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p> 2. Output signal form setup (JPA&amp;JPB) <\/p>\n<p>\tUsers can set the output signal form (voltage\/current) of individual channels; except the polarity and amplitude which are common.<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Signal Form<\/p>\n<\/td>\n<td>\n<p>JPA (voltage\/current) Setting<\/p>\n<\/td>\n<td>\n<p>JPB (polarity\/amplitude) Setting<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p> 0V\uff5e10V <\/p>\n<p> -10V\uff5e10V <\/p>\n<p> 0V\uff5e5V <\/p>\n<p> -5V\uff5e5V <\/p>\n<p> 0mA\uff5e20mA <\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p> -20mA\uff5e20mA <\/p>\n<\/td>\n<td>\n<p>V<\/p>\n<\/td>\n<td>\n<p>I<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p> 0mA\uff5e10mA <\/p>\n<p> -10mA\uff5e10mA <\/p>\n<p>\u25cf (Analog input) <\/p>\n<p> 1. Input code format selection (JP1) <\/p>\n<p>Users can select between unipolar and bipolar codes. The input range of unipolar codes and bipolar codes is 0~16383 and \u20138192~8191, respectively. The two extreme values of these formats correspond to the lowest and highest input signal values, respectively (see table below). For example, if the input signal type is set to -10V~ +10V, the unipolar code corresponding to the input is 8192 and the bipolar code corresponding to the input is 0 for 0V input. If the input is 10V, the unipolar code corresponding to the input is 16383 and the bipolar code corresponding to the input is 8191. In general, the input code format is selected according to the form of input signals; i.e. unipolar codes for unipolar input <\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-622.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-623.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-624.png\" \/><\/p>\n<p>signals; and bipolar codes for bipolar input signals. In doing so, their correlations will become more heuristics. Unless it is <\/p>\n<p>necessary to make a deviation conversion through FUN33; otherwise, do not select bipolar codes for unipolar input signals (see FUN33 description for details). The format of input codes of all channels is selected from JP1. See above diagram for the location of JP1\uff1a<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p> Input Code Format<\/p>\n<\/td>\n<td>\n<p>JP1 Setting<\/p>\n<\/td>\n<td>\n<p>Input Value Range<\/p>\n<\/td>\n<td>\n<p>Corresponding Input Signals<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Bipolar<\/p>\n<\/td>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-625.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-626.png\" \/><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<td>\n<p> -8192\uff5e8191 <\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>-10V\uff5e10V(-20mA\uff5e20mA)  -5V\uff5e5V(-10mA\uff5e10mA) \t 0V\uff5e10V(0mA\uff5e20mA) \t 0V\uff5e5V(0mA\uff5e10mA) <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Unipolar<\/p>\n<\/td>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-627.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-628.png\" \/><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<td>\n<p> 0\uff5e16383 <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-629.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-630.png\" \/>\t<img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-631.png\" \/>\t<img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-632.png\" \/>\t<img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-633.png\" \/>\t<img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-634.png\" \/><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p> 2. Input signal form setup (JP3&amp;JP4) <\/p>\n<p>\tUsers can set the input signal form (voltage\/current) of individual channels; except the polarity and amplitude which are common. The location of jumpers are tabulated below\uff1a<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Signal Form<\/p>\n<\/td>\n<td>\n<p>JP3 Setting<\/p>\n<\/td>\n<td>\n<p>JP4Setting<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>0\uff5e10V <br \/>or <br \/> 0\uff5e20mA <\/p>\n<\/td>\n<td rowspan=\"2\">\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-635.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-636.png\" \/><\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-637.png\" \/><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-638.png\" \/><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>0\uff5e5V <br \/>or <\/p>\n<p> 0\uff5e10mA <\/p>\n<\/td>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-639.png\" \/><\/p>\n<\/td>\n<td>\n<p>5V <br \/>10V<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>-10\uff5e+10V <br \/>\tor <br \/> -20\uff5e+20mA <\/p>\n<\/td>\n<td rowspan=\"2\">\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>U<\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-640.png\" \/><\/p>\n<\/td>\n<td><\/td>\n<td><\/td>\n<\/tr>\n<tr>\n<td rowspan=\"2\">\n<p>B<\/p>\n<\/td>\n<td rowspan=\"2\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-641.png\" \/><\/p>\n<\/td>\n<td><\/td>\n<td rowspan=\"2\"><\/td>\n<\/tr>\n<tr>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-642.png\" \/><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-643.png\" \/><\/p>\n<\/td>\n<td>\n<p>5V <br \/>10V<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\t-5\uff5e+5V <br \/>\tor <br \/> -10mA\uff5e+10mA <\/p>\n<\/td>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-644.png\" \/><\/p>\n<\/td>\n<td>\n<p>5V <br \/>10V<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p> 3. Voltage or current setting (JP5\uff5eJP8) <\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Signal Type<\/p>\n<\/td>\n<td>\n<p>JP5(CH0) \uff5e JP8(CH3) Setting<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>Voltage<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>I<\/p>\n<\/td>\n<td>\n<p>V<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>Current<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-018\/fbs-hw-en-018-645.png\" \/><\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p> 18.3.5 FBs-4A2D Input\/Output Circuit Diagram <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>FBs-4A2D<\/p>\n<\/td>\n<td rowspan=\"6\">\n<p>V<\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>24V+<\/p>\n<\/td>\n<td colspan=\"2\">\n<p>Output<\/p>\n<\/td>\n<td rowspan=\"7\">\n<p>+<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>+15V<\/p>\n<\/td>\n<td>\n<p>+<\/p>\n<\/td>\n<td>\n<p>24VDC<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"5\">\n<p>15V<\/p>\n<\/td>\n<td>\n<p>24V<\/p>\n<\/td>\n<td colspan=\"2\">\n<p>External power supply<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"2\">\n<p>O0+<\/p>\n<\/td>\n<td colspan=\"2\">\n<p>CH0 Voltage output<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"2\">\n<p>V+<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"2\">\n<p>O0<\/p>\n<\/td>\n<td colspan=\"2\" rowspan=\"2\">\n<p>V<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>I<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>\t\tVoltage Input D\/A \tFG<\/p>\n<p>CH1 Current Input<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td rowspan=\"2\">\n<p>V<\/p>\n<\/td>\n<td>\n<p>O1+<\/p>\n<\/td>\n<td>\n<p>I+<\/p>\n<\/td>\n<td rowspan=\"3\">\n<p>+<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"2\">\n<p>O1<\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>I<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>I<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>Current Input<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Voltage\/<\/p>\n<\/td>\n<td>\n<p>Twisted pair with shielding<\/p>\n<\/td>\n<td>\n<p>FG<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>Current output <\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>selection<\/p>\n<\/td>\n<td>\n<p>AG<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>FG<\/p>\n<p>Input<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td rowspan=\"12\">\n<p>A\/D <\/p>\n<\/td>\n<td>\n<p>V<\/p>\n<\/td>\n<td>\n<p>I0+<\/p>\n<\/td>\n<td rowspan=\"12\">\n<p>Twisted pair with shielding<\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>V<\/p>\n<\/td>\n<td>\n<p>CH0 Input<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"2\">\n<p>I<\/p>\n<\/td>\n<td>\n<p>I0<\/p>\n<\/td>\n<td>\n<p>(Voltage source)<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"2\">\n<p>I1+<\/p>\n<\/td>\n<td rowspan=\"3\">\n<p>I<\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>CH1 Input<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>V<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"2\">\n<p>I<\/p>\n<\/td>\n<td>\n<p>I1<\/p>\n<\/td>\n<td>\n<p>(Current source)<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"2\">\n<p>I2+<\/p>\n<\/td>\n<td rowspan=\"3\">\n<p>V<\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>CH2 Input<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>V<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"2\">\n<p>I<\/p>\n<\/td>\n<td>\n<p>I2<\/p>\n<\/td>\n<td>\n<p>(Voltage source)<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"2\">\n<p>I3+<\/p>\n<\/td>\n<td rowspan=\"4\">\n<p>I<\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>CH3 Input<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>V<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>I<\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>I3<\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>(Current source)<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Voltage\/<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>Current input <br \/>selection<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p> 18.3.6 FBs-4A2D Input\/Output Characteristics <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>Users can select the I\/O ranges of FBs-4A2D from the jumpers described above, such as V\/I, U\/B (I\/O codes), U\/B <\/p>\n<p>(signal form), 5V\/10V, etc. The I\/O conversion characteristics of these settings are illustrated below. Users can adjust <\/p>\n<p>different I\/O forms by coordinating the conversion curve with various V\/I (voltage\/current) I\/O settings. See Section 18.3.4 <\/p>\n<p>for details of V\/I settings. <\/p>\n","protected":false},"excerpt":{"rendered":"<p>18.1FBs-6AD Analog Input Module FBs-6AD is one of the a [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[33],"tags":[],"class_list":["post-3423","post","type-post","status-publish","format-standard","hentry","category-en-fbs-hw"],"_links":{"self":[{"href":"https:\/\/resource.fatek.com\/index.php\/wp-json\/wp\/v2\/posts\/3423","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/resource.fatek.com\/index.php\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/resource.fatek.com\/index.php\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/resource.fatek.com\/index.php\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/resource.fatek.com\/index.php\/wp-json\/wp\/v2\/comments?post=3423"}],"version-history":[{"count":0,"href":"https:\/\/resource.fatek.com\/index.php\/wp-json\/wp\/v2\/posts\/3423\/revisions"}],"wp:attachment":[{"href":"https:\/\/resource.fatek.com\/index.php\/wp-json\/wp\/v2\/media?parent=3423"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/resource.fatek.com\/index.php\/wp-json\/wp\/v2\/categories?post=3423"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/resource.fatek.com\/index.php\/wp-json\/wp\/v2\/tags?post=3423"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}