{"id":3426,"date":"2026-11-17T21:35:03","date_gmt":"2026-11-17T13:35:03","guid":{"rendered":"https:\/\/resource.fatek.com\/index.php\/2026\/11\/17\/fbs-hw-en-021\/"},"modified":"2026-11-17T21:35:03","modified_gmt":"2026-11-17T13:35:03","slug":"fbs-hw-en-021","status":"publish","type":"post","link":"https:\/\/resource.fatek.com\/index.php\/2026\/11\/17\/fbs-hw-en-021\/","title":{"rendered":"Chapter 21 Analog Input and Temperature Measurement Combination"},"content":{"rendered":"<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-021\/fbs-hw-en-021-001.png\" \/><\/p>\n<p><strong>Module <\/strong><\/p>\n<p>In response to actual needs of user applications, FBs-PLC provides an economical combination of temperature and analog input module measurement. In short, it is to integrate single temperature module and the characteristics of analog input module. Therefore, the setup and operation methods for single temperature module and analog input module are exactly the same, except the number of channels can be measured is different.  Both 2A4TC and 2A4RTD modules have offered 2 channels analog input and 4 channels temperature measurement capability.  The difference is that 2A4TC is using thermocouple to measure temperature, while the 2ARTD4 is using RTD sensor to measure temperature. There are 8 types of thermocouple to choose: J\u3001K\u3001T\u3001E\u3001N\u3001B\u3001R\u3001S; And there are only two types of RTD sensor: PT-100 and PT-1000. <\/p>\n<p>This combination measurement module occupied 4 numerical input registers and 8 points digital output. The maximum measureable temperature point of a PLC main unit is 32 points. The update rate for temperature reading value can be set as normal (the resolution is 0.1\u00b0) or fast (the resolution is 1\u00b0). <\/p>\n<p>The WinProladder provides the very user friendly table editing operation interface to configure the temperature measurement, for example, selecting the temperature module, type of sensor, and assign the registers to store the reading values. As to the temperature control, it has the convenient instruction FUN86 (TPCTL) to perform the PID operation to control the heating or cooling of the temperature process.  Please refer to Chapter 18 for analog input operations and analog input modules setup. <\/p>\n<p>21.1Specifications of Temperature and Analog Input Measuring Modules <\/p>\n<h4> 21.1.1 Specifications of Temperature Measurement <\/h4>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Items <\/p>\n<p>Specifications <\/p>\n<p>Number of input points <\/p>\n<p>Thermocouple type and <br \/>temperature measurement range <\/p>\n<p>I\/O Points Occupied <\/p>\n<p>Software Filter <\/p>\n<\/td>\n<td>\n<p>Module <\/p>\n<p>FBs-2A4TC <\/p>\n<p>4 points <\/p>\n<p> J(\u2212200\uff5e900\u00b0C)          E(\u2212190\uff5e1000\u00b0C)  K(\u2212190\uff5e1300\u00b0C)         T(\u2212190\uff5e380\u00b0C)  R(0\uff5e1800\u00b0C)            B(350\uff5e1800\u00b0C)  S(0\uff5e1700\u00b0C)            N(\u2212200\uff5e1000\u00b0C) <\/p>\n<p>2 IR(Input Register)\u30018 DO(Discrete Output) <\/p>\n<p>Moving Average <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>Average Sample <br \/>Compensation <\/p>\n<p>NO 1\u30012\u30014\u30018Configurable <br \/>Built-in cold junction compensation <\/p>\n<p>Resolution \t0.1\u00b0C <\/p>\n<p>Conversion Time \t2 or 4 seconds <\/p>\n<p>Overall Precision \u00b1(1%+1\u00b0C) <\/p>\n<p>Isolation \tTransformer (Power) and photocouple (Signal) isolation (per-channel isolation) <\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-021\/fbs-hw-en-021-002.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-021\/fbs-hw-en-021-003.png\" \/><\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td rowspan=\"2\">\n<p>Specifications <\/p>\n<\/td>\n<td rowspan=\"3\">\n<p>Item <\/p>\n<\/td>\n<td>\n<p>Module <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>FBs-2A4RTD <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>RTD input points <\/p>\n<\/td>\n<td>\n<p>4 points <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>3-wire RTD sensor JIS(\u03b1=0.00392) or DIN(\u03b1=0.00385) <\/p>\n<p>RTD type and temperature measurement range <\/p>\n<p>I\/O Points Occupied <\/p>\n<p>Pt-100(\u2212200\uff5e850\u00b0C) <br \/>Pt-1000(\u2212200\uff5e600\u00b0C) <\/p>\n<p>2 IR(Input Register)\u30018 DO(Discrete Output) <\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Software Filter <br \/>Average Samples Resolution <br \/>Conversion Time Overall Precision Isolation <\/p>\n<\/td>\n<td>\n<p>Moving Average <br \/>No 1\u30012\u30014\u30018 Configurable <\/p>\n<p>0.1\u00b0C <\/p>\n<p>1 or 2 seconds <br \/>\t\u00b11% <\/p>\n<p>Transformer(Power) and photocouple (Signal) isolation (pre-channel isolation) <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>21.1.2 Specifications of Analog Input Measurement <\/p>\n<\/td>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td rowspan=\"2\">\n<p>Specifications <\/p>\n<\/td>\n<td rowspan=\"3\">\n<p>Item <\/p>\n<\/td>\n<td>\n<p>Module <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>FBs-2A4TC\/FBs-2A4RTD <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Input Channel <\/p>\n<\/td>\n<td>\n<p>2 Channel <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>Digital input reading <\/p>\n<p>\u22128192\uff5e+8191 or 0\uff5e16383(14-bit) <br \/>\u22122048\uff5e+2047 or 0\uff5e4095(12-bit) <\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Input signal types <br \/>Resolution <br \/>Finest resolution <br \/>I\/O Points Occupied Accuracy <br \/>Conversion Time <\/p>\n<\/td>\n<td>\n<p>Voltage: -10~+10V, -5~+5V,0~5V,0~10V <br \/>Current: -20~+20mA,-10~+10mA,0~10mA,0~20mA 14 or 12 bits <br \/>Voltage\uff1a0.3mV <br \/>Current\uff1a0.61\u00b5A <\/p>\n<p>2 IR(Input Register) <br \/>Within \u00b11% of full scale <br \/>Updated each scan <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>Maximum absolute input signal <\/p>\n<p>Voltage\uff1a\u00b115V\uff08max\uff09<br \/>Current\uff1a\u00b130mA\uff08max\uff09<\/p>\n<p>Input resistance \t63.2K\u2126\uff08Voltage Input\uff09\u3001250\u2126\uff08Current Input\uff09<\/p>\n<p>Isolation \tTransformer (Power) and photocouple (Signal) <\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-021\/fbs-hw-en-021-004.png\" \/><\/p>\n<h4>21.1.3 Common Specifications <\/h4>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td rowspan=\"2\">\n<p>Specifications <\/p>\n<\/td>\n<td rowspan=\"8\">\n<p>Item<\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>FBs-2A4TC <\/p>\n<\/td>\n<td>\n<p>Module <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>FBs-2A4RTD <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Internal Current Consumption <\/p>\n<\/td>\n<td>\n<p>5V, 50mA <\/p>\n<\/td>\n<td>\n<p>5V, 50mA <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>External Current Consumption <\/p>\n<\/td>\n<td rowspan=\"5\">\n<p>24V, 39mA <\/p>\n<\/td>\n<td>\n<p>24V, 39mA <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Indicator(s) <\/p>\n<\/td>\n<td>\n<p>5VPWR LED <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Operating Temperature <\/p>\n<\/td>\n<td>\n<p>0 ~ 60 \u2103<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Storage Temperature <\/p>\n<\/td>\n<td>\n<p>-20 ~ 80 \u2103<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Dimensions <\/p>\n<\/td>\n<td>\n<p>40(W)x90(H)x80(D) mm <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p> 21.2The Procedures of Using Temperature Measurement <\/p>\n<p>Please refer this part to section 20.2 <\/p>\n<h3> 21.3 The Procedures to Configure the Temperature Measurement <\/h3>\n<p>Please refer this part to section 20.3 <\/p>\n<h3> 21.4 Hardware Descriptions of Modules <\/h3>\n<p>FBs-2A4TC and FBs-2A4RTD is composed by three circuit boards.  The lowest layer is the power board (provides isolated power supply module), the medium is the I\/O board (terminal blocks in this layer), the top layer is the control board (control and expand input and output connections).  The description is as follows: <\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-021\/fbs-hw-en-021-005.png\" \/><\/p>\n<h4>21.4.1 FBs-2A4TC\/FBs-2A4RTD Outlook of Top View <\/h4>\n<p> 2A4TC outlook of top view <\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td rowspan=\"3\">\n<p>2<\/p>\n<\/td>\n<td>\n<p>1<\/p>\n<\/td>\n<td rowspan=\"3\">\n<p><strong>AG<\/strong><\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>6<\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>7<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"2\">\n<p><strong>+ 24V IN &#8211;<\/strong><\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"2\">\n<p><strong>I0+ <\/strong>\t<strong>I1+<\/strong><\/p>\n<p><strong>I0-<\/strong>\t<strong>I1-<\/strong><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>V<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>I<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>U<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>B<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>5V<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>10V<\/strong><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>4<\/p>\n<p><strong>POW<\/strong><\/p>\n<p>3<\/p>\n<p><strong>FBs-2A4TC<\/strong><\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>T0+<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>T0-<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>T1+<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>T1-<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>T2+<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>T2-<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>T3+<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>T3-<\/strong><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>5<\/p>\n<p>8 9 \t10 \t11<\/p>\n<p>\u25cb1 External power input terminal\uff1aPower supply of analog circuit for this module, the voltage can be <\/p>\n<p>24VDC\u00b120%. <\/p>\n<p>\u25cb2Protecting ground terminal\uff1aConnect to the shielding of signal cable. <\/p>\n<p>\u25cb3 Expansion input cable\uff1aIt should be connected to the front expansion unit, or the expansion output of main <\/p>\n<p>unit. <\/p>\n<p>\u25cb4 Expansion output connector\uff1aProvides the connection for next expansion unit. <\/p>\n<p>\u25cb5 Power Indicator\uff1aIt indicates whether the power supply of the analog circuit and external input power <\/p>\n<p>source of this module are normal. <\/p>\n<p>\u25cb6 Analog input terminal of CH0\uff1aThe analog signal input of channel 0(I0+\u3001I0-). <\/p>\n<p>\u25cb7 Analog input terminal of CH1\uff1aThe analog signal input of channel 1(I1+\u3001I1-). <\/p>\n<p>\u25cb8\uff5e\u25cb11 Thermocouple input terminal of CH0\uff5eCH3\uff1aThe thermocouple input of channel 0\uff5echannel <\/p>\n<p>3(T0+,T0-~T3+,T3-). <\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-021\/fbs-hw-en-021-006.png\" \/><\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>2A4RTD outlook of top view <\/p>\n<\/td>\n<td>\n<p>1<\/p>\n<\/td>\n<td>\n<p>6<\/p>\n<\/td>\n<td>\n<p>7<\/p>\n<\/td>\n<td>\n<p>8<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>2<\/p>\n<\/td>\n<td>\n<p><strong>+ 24V IN &#8211;<\/strong><\/p>\n<\/td>\n<td colspan=\"3\">\n<p><strong>I0+ I1+<\/strong><\/p>\n<p><strong>COM <\/strong>\t<strong>I0-I1-<\/strong><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>VI<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>UB<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>5V<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>10V<\/strong><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>4<\/p>\n<p><strong>POW<\/strong><\/p>\n<p>3<\/p>\n<p><strong>FBs-2A4RTD<\/strong><\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><strong>P0+<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>P0-<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>P1+<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>P1-<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>P2+<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>P2-<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>P3+<\/strong><\/p>\n<\/td>\n<td>\n<p><strong>P3-<\/strong><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>5<\/p>\n<p>9 10 \t11 \t12<\/p>\n<p>\u25cb1 External power input terminal\uff1aPower supply of analog circuit for this module, the voltage can be <\/p>\n<p>24VDC\u00b120%. <\/p>\n<p>\u25cb2Protecting ground terminal\uff1aConnect to the shielding of signal cable. <\/p>\n<p>\u25cb3 Expansion input cable\uff1aIt should be connected to the front expansion unit, or the expansion output of main <\/p>\n<p>unit. <\/p>\n<p>\u25cb4 Expansion output connector\uff1aProvides the connection for next expansion unit. <\/p>\n<p>\u25cb5 Power indicator\uff1aIt indicates whether the power supply of the analog circuit and external input power <\/p>\n<p>source of this module are normal. <\/p>\n<p>\u25cb6 Common terminals of RTD\uff1aTo connect to the common wire of each 3-wires RTD input. <\/p>\n<p>\u25cb7 Analog input terminal of CH0\uff1aThe analog signal input of channel 0(I0+\u3001I0-). <\/p>\n<p>\u25cb8Analog input terminal of CH1\uff1aThe analog signal input of channel 1(I1+\u3001I1-). <\/p>\n<p>\u25cb9\uff5e\u25cb12 Input terminal for CH0\uff5eCH3 RTD\uff1aThe RTD input of channel0\uff5echannel3 (P0+,P0-~P3+,P3-). <\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-021\/fbs-hw-en-021-007.png\" \/><\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p> 21.5Wiring of Modules <\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p> 21.5.1 Wiring of 2A4TC Module <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>Inputs<\/p>\n<p>+<\/p>\n<p>External power supply<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>+<\/p>\n<\/td>\n<td rowspan=\"3\">\n<p>+<\/p>\n<\/td>\n<td rowspan=\"3\">\n<p>T0+<\/p>\n<\/td>\n<td rowspan=\"3\">\n<p>Extension cable<\/p>\n<\/td>\n<td rowspan=\"3\">\n<p>+<\/p>\n<\/td>\n<td>\n<p>V<\/p>\n<\/td>\n<td>\n<p>CH0 Voltage Input<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"2\">\n<p>+<\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>I<\/p>\n<\/td>\n<td>\n<p>CH1 Current Input<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Thermocouple<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>T0<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>+<\/p>\n<\/td>\n<td>\n<p>T1+<\/p>\n<\/td>\n<td>\n<p>+<\/p>\n<\/td>\n<td>\n<p>Thermocouple<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>T1<\/p>\n<p>Thermocouple <br \/>Input<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>+<\/p>\n<\/td>\n<td>\n<p>T3+<\/p>\n<\/td>\n<td>\n<p>+<\/p>\n<\/td>\n<td>\n<p>Thermocouple<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>T3<\/p>\n<p>Multiplexer<\/p>\n<p>Extension cable<\/p>\n<p>(Shielding must be connected to FG)<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-021\/fbs-hw-en-021-008.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-021\/fbs-hw-en-021-009.png\" \/><\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p> 21.5.2 Wiring of 2A4RTD Module <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>Inputs<\/p>\n<p>+<\/p>\n<p>External power supply<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>+<\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>V<\/p>\n<\/td>\n<td>\n<p>CH0 Votage Input<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"2\">\n<p>+<\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>CH1 Current Input<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>I<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-021\/fbs-hw-en-021-010.png\" \/><\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td rowspan=\"7\">\n<p>+<\/p>\n<\/td>\n<td>\n<p>+<\/p>\n<\/td>\n<td>\n<p>P0+<\/p>\n<\/td>\n<td>\n<p>Red line<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"6\">\n<p>+<\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>P0<\/p>\n<\/td>\n<td>\n<p>White line<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"2\">\n<p>White line<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"2\">\n<p>COM<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"2\">\n<p>Red line<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>P1+<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>P1<\/p>\n<\/td>\n<td>\n<p>White line<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>White line<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td rowspan=\"2\">\n<p>+<\/p>\n<\/td>\n<td>\n<p>P3+<\/p>\n<\/td>\n<td>\n<p>Red line<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>P3<\/p>\n<\/td>\n<td>\n<p>White line<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>White line<\/p>\n<p>Multiplexer<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-021\/fbs-hw-en-021-011.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-021\/fbs-hw-en-021-012.png\" \/><\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>21.6  The Jumper Setup of 2A4RTD\/2A4TC <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>The analog input measurements of measurement signal and measurement range of these two modules are selected and set by the jumper\u2019s connection <\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>21.6.1 Position Jumper <\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>21.6.1.1  The Position Jumper of 2A4TC <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>JP3 <br \/>V <br \/>I <br \/>JP4<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>JP5<\/p>\n<p>JP6<\/p>\n<\/td>\n<td>\n<p>U <br \/>B<\/p>\n<p>10V <br \/>5V<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>U <br \/>B <br \/>JP1<\/p>\n<p>Pin layout in control board(open top cover)<\/p>\n<p>Pin layout on I\/O board (remove control board)<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-021\/fbs-hw-en-021-013.png\" \/><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-021\/fbs-hw-en-021-014.png\" \/><\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td colspan=\"6\">\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>21.6.1.2 The Position Jumper of 2A4RTD <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"4\">\n<p>B<\/p>\n<\/td>\n<td rowspan=\"5\">\n<p>JP1<\/p>\n<\/td>\n<td colspan=\"2\" rowspan=\"5\">\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-021\/fbs-hw-en-021-015.png\" \/><\/p>\n<\/td>\n<td>\n<p>JP3<\/p>\n<\/td>\n<td rowspan=\"2\">\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>V<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>I<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>JP4<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>JP5<\/p>\n<\/td>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>U<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>B<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"2\">\n<p>JP6<\/p>\n<\/td>\n<td rowspan=\"2\">\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>10V<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>5V<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>U<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"2\">\n<p>Pin layout in control board(open top cover) <\/p>\n<\/td>\n<td colspan=\"4\">\n<p>Pin layout on I\/O board (remove control board) <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"6\">\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>21.6.2 Input Code Format Selection of Jumper Setting <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Input Code Format <\/p>\n<\/td>\n<td>\n<p>JP1 Setting <\/p>\n<\/td>\n<td>\n<p>Input Value Range <\/p>\n<\/td>\n<td colspan=\"3\">\n<p>Corresponding Input Signals <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"6\">\n<p>-10V\uff5e10V(-20mA\uff5e20mA) <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>Bipolar <\/p>\n<\/td>\n<td>\n<p>U<\/p>\n<\/td>\n<td colspan=\"4\">\n<p> -8192\uff5e8191 <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td colspan=\"6\">\n<p> -5V\uff5e5V(-20mA\uff5e20mA) <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>B<\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td rowspan=\"2\">\n<p>Unipolar <\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>JP1<\/p>\n<\/td>\n<td rowspan=\"2\">\n<p>U<\/p>\n<\/td>\n<td rowspan=\"2\">\n<p> 0\uff5e16383 <\/p>\n<\/td>\n<td>\n<p> 0V\uff5e10V(0mA\uff5e20mA) <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p> 0V\uff5e5V(0mA\uff5e10mA) <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>B<\/p>\n<p>Regarding the explanations of choosing input code format, please refer to section 18.1.4.1. <\/p>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>21.6.3 Input Signal Form of Jumper Setup <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Signal Form <\/p>\n<\/td>\n<td>\n<p>JP5 Setting <\/p>\n<\/td>\n<td>\n<p>JP6 Setting <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>\t0\uff5e10V <br \/>\tor <br \/> 0\uff5e20mA <\/p>\n<\/td>\n<td rowspan=\"2\">\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>U <br \/>B<\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-021\/fbs-hw-en-021-016.png\" \/><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-021\/fbs-hw-en-021-017.png\" \/><\/p>\n<\/td>\n<td>\n<p>10V 5V<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>0\uff5e5V <br \/>or <\/p>\n<p> 0\uff5e10mA <\/p>\n<\/td>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-021\/fbs-hw-en-021-018.png\" \/><\/p>\n<\/td>\n<td>\n<p>10V 5V<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>-10\uff5e+10V <br \/>or <\/p>\n<p> -20\uff5e+20mA <\/p>\n<\/td>\n<td rowspan=\"2\">\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>U <br \/>B<\/p>\n<\/td>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-021\/fbs-hw-en-021-019.png\" \/><\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-021\/fbs-hw-en-021-020.png\" \/><\/p>\n<\/td>\n<td>\n<p>10V 5V<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>-5\uff5e+5V <br \/>\tor <br \/> -10mA\uff5e+10mA <\/p>\n<\/td>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-021\/fbs-hw-en-021-021.png\" \/><\/p>\n<\/td>\n<td>\n<p>10V 5V<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td><\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>21.6.4 Input Signal Type of Jumper Setup <\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p>Signal Form <\/p>\n<\/td>\n<td>\n<p>JP3(CH0) , JP4(CH1) Setting <\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p> Voltage <\/p>\n<\/td>\n<td>\n<div class=\"fatek-tw\">\n<table>\n<tr>\n<td>\n<p><img decoding=\"async\" src=\"https:\/\/resource.fatek.com\/wp-content\/uploads\/fatek\/fbs-hw-en-021\/fbs-hw-en-021-022.png\" \/><\/p>\n<\/td>\n<td>\n<p>V <br \/>I<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<\/td>\n<\/tr>\n<tr>\n<td rowspan=\"2\">\n<p> Current <\/p>\n<\/td>\n<td>\n<p>V<\/p>\n<\/td>\n<\/tr>\n<tr>\n<td>\n<p>I<\/p>\n<\/td>\n<\/tr>\n<\/table>\n<\/div>\n<p>The default factory settings of FBs-2A4TC\/FBs-2A4RTD are: <\/p>\n<p> Input code format \u00c6 Bipolar <\/p>\n<p> Input signal type \u00c6 -10V\uff5e+10V <\/p>\n<p> For those applications that require the setting differ than the above default setting should make some modifications of jumper position according to above tables.  While application, besides the setting of jumper should be conducted, the AI module configurations of Winproladder also need to be performed. (Refer to section 18.1.7 for explanation) <\/p>\n","protected":false},"excerpt":{"rendered":"<p>Module In response to actual needs of user applications [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[33],"tags":[],"class_list":["post-3426","post","type-post","status-publish","format-standard","hentry","category-en-fbs-hw"],"_links":{"self":[{"href":"https:\/\/resource.fatek.com\/index.php\/wp-json\/wp\/v2\/posts\/3426","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/resource.fatek.com\/index.php\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/resource.fatek.com\/index.php\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/resource.fatek.com\/index.php\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/resource.fatek.com\/index.php\/wp-json\/wp\/v2\/comments?post=3426"}],"version-history":[{"count":0,"href":"https:\/\/resource.fatek.com\/index.php\/wp-json\/wp\/v2\/posts\/3426\/revisions"}],"wp:attachment":[{"href":"https:\/\/resource.fatek.com\/index.php\/wp-json\/wp\/v2\/media?parent=3426"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/resource.fatek.com\/index.php\/wp-json\/wp\/v2\/categories?post=3426"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/resource.fatek.com\/index.php\/wp-json\/wp\/v2\/tags?post=3426"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}