Posted in

By

7 of 13Updated 2026-11-1713 min read中文版

M-Series PLC Specifications

6-1 General Specifications

Item

ME,MS,MU

MA,MQ

Power consumption

DC24V±20%,0.2A

DC24V±20%,0.15A

Grounding Requirements

Class D grounding (type 3 grounding)

Environmental Specifications

Environmental temperature

0~55℃

Storage humidity

5~95% RH

(non-condensation, RH-2)

Working atmosphere

Free from excessive conductive dust and corrosive gas.

Storage Temperature

-25~70℃

Altitude

≤2000m

Pollution resistance

Degree II

Vibration resistance

5 to 8.4Hz Half-amplitude: 3.5mm
8.4 to 150 Hz Constant acceleration: 19.6m/s2 (2G)
3 directions of X, Y, Z: 10times (IEC61131-2 compliants)

Shock resistance

10G, three times for each direction of 3 axes

Noise resistance

1500Vp-p,pulse width 1us

Pressure resistance

1500 VAC for 1 minute between power terminals and input/output terminals and between all external terminals and housing

CPU module size

90mm×63.4mm×90mm
Without side buckle & European terminal connector

CPU module weight

246g (excluding end module);

236g (excluding end module);

280g (including end module)

270g (including end module)

Applicable Standards

CE,UL*

CPU General Specifications

*Please note when placing an order.

6-2 CPU Specifications

Specifications for advanced motion and general motion PLC model

Specification

ME3C6

ME2C5

ME2C4

ME2C3

MS3C6

MS2C5

MS2C4

Programming language

LD / ST / FB / STP / MotionFlow

Instruction execution

speed

LD Instruction

0.0008 uS/ LD (0.8nS/LD)

MOV Instruction

0.0075 uS/ LD (7.5nS / MOV)

Maximum I/O

DIO

2048

2048

1024

1024

2048

2048

1024

AIO

256

256

128

128

256

256

128

Maximum Expansion Modules

Local I/O + High-speed

64 units (with the use of I/O Bus Extension module)

High-speed Expansion

6 units (need to be installed between CPU and Local I/O module)

Advanced Expansion

●

●

●

●

●

●

●

Plug-in Expansion

-

-

-

-

-

-

-

Program Memory

PLC

80KB

80KB

80KB

80KB

80KB

80KB

80KB

Motion

3 MB

1.5 MB

1.1 MB

742 KB

3 MB

1.5 MB

1.1 MB

Memory card*5

Dedicated Industrial Grade Micro-SD Card

Project Backup and Restore

Support project and OS update with memory card

Register Data Backup and Restore

●

●

●

●

●

●

●

Built-in digital input and output

Input 16 points 、 Output 16 points

Built-in analog input

2ch 12bits

Built-in analog output

Optional selection (PWMDA x1 only in Y0)

Communication Interface

ETHERNET

Interface

1 Port 10/100 Base-T

Modbus / User-Defined

Master/Slave

Connections

16

EtherCAT

1 Port

RS-485

2 ports ,Support Master/Slave ,Communication speed 4.8K~921.6Kbps

Maximum serial ports

14 (2 Built-in + 12 Expansion)

USB

1 port ,USB Type C (USB 2.0)

IoT expansion*4

MQTT , FATEK iMonitor / iAccess

Motion Control

Number of control axes

24

22

18

13

24

22

18

Pulse

Axes

8

8

8

8

8

8

8

Output frequency

200KHz

200KHz

200KHz

200KHz

200KHz

200KHz

200KHz

Pulse output mode

3 Modes(U/D、P/R、A/B)

Linear Interpolation

●

●

●

●

●

●

●

Circular Interpolation

●

●

●

●

●

●

●

ICF/ICA*2

●

●

●

●

●

●

●

EtherCAT

Number of axes (A+B+C)

16

14

10

5

16

14

10

Real/Virtual axes(A)

16

12

8

4

16

12

8

Additional Virtual axes(B)

0

2

2

1

0

2

2

Additional SAPC*1

axes on Eth/EC port(C)

-

-

-

-

-

-

-

Specification

ME3C6

ME2C5

ME2C4

ME2C3

MS3C6

MS2C5

MS2C4

Motion Control

EtherCAT

Linear Interpolation

●

●

●

●

●

●

●

Circular Interpolation

●

●

●

●

●

●

●

ICF/ICA*2

●

●

●

●

●

●

●

3D Circular/Helical Interpolation

●

●

●

●

-

-

-

E-cam(Fly-saw/Rotary-cut)

16

12

8

4

3

3

2

High-speed counter (200KHz) *3

16 points (8 channel)

16 points (8 channel)

High-speed Pulse output

16 points(8 axes)

16 points(8 axes)

High-speed timer 0.1mS

1 (16-bit) , 4 (32-bit)

Built-in RTC

sec,min,hour,day,month,year,week

Data retentive

Program and Data

Non-volatile memory (no battery required)

Calendar

Battery

Specification

MU3C6

MU3C5

MU3C4

MU3C3

MU3C2*7

MU2C6

MU2C4

Programming language

LD / ST / FB / STP / MotionFlow

Instruction execution

speed

LD Instruction

0.0008 uS/ LD (0.8nS/LD)

MOV Instruction

0.0075 uS/ LD (7.5nS / MOV)

Maximum I/O

DIO

512

512

512

512

512

512

512

AIO

128

128

128

128

128

128

128

Maximum Expansion Modules

Local I/O + High-speed

64 units (with the use of I/O Bus Extension module)

High-speed Expansion

-

-

-

-

-

-

-

Advanced Expansion

-

-

-

-

-

-

-

Plug-in Expansion

-

-

-

-

-

-

-

Program Memory

PLC

80KB

80KB

80KB

80KB

80KB

80KB

80KB

Motion

1.5 MB

1.5 MB

1.5 MB

1.5 MB

1.5 MB

1.5 MB

1.5 MB

Memory card*5

Dedicated Industrial Grade Micro-SD Card

Project Backup and Restore

Support project and OS update with memory card

Register Data Backup and Restore

●

●

●

●

●

●

●

Built-in digital input and output

Input 16 points 、 Output 16 points

Built-in analog input

2ch 12bits

Built-in analog output

Optional selection (PWMDA x1 only in Y0)

Communication Interface

ETHERNET

Interface

1 Port 10/100 Base-T

Modbus / User-Defined

Master/Slave

Connections

16

EtherCAT

1 Port

RS-485

2 ports ,Support Master/Slave ,Communication speed 4.8K~921.6Kbps

Maximum serial ports

2 Built-in

USB

1 port ,USB Type C (USB 2.0)

IoT expansion*4

MQTT , FATEK iMonitor / iAccess

Specification

MU3C6

MU3C5

MU3C4

MU3C3

MU3C2*7

MU2C6

MU2C4

Motion Control

Number of control axes

20

17

9

9

7

18

10

Pulse

Axes

4

4

2

2

2

2

2

Output frequency

200KHz

200KHz

200KHz

200KHz

200KHz

200KHz

200KHz

Pulse output mode

1 Modes(P/R)

Linear Interpolation

●

●

●

●

●

●

●

Circular Interpolation

●

●

●

●

●

●

●

ICF/ICA*2

●

●

●

●

●

●

●

EtherCAT

Number of axes (A+B+C)

16

13

7

7

5

16

8

Real/Virtual axes(A)

16

12

6

6

4

16

8

Additional Virtual axes(B)

–

1

1

1

1

-

-

Additional SAPC*1

axes on Eth/EC port(C)

–

–

-

-

-

-

-

Linear Interpolation

●

●

●

●

●

●

●

Circular Interpolation

●

●

●

●

●

●

●

ICF/ICA*2

●

●

●

●

●

-

-

3D Circular/Helical Interpolation

–

–

-

-

-

-

-

E-cam(Fly-saw/Rotary-cut)

6

4

4

3

2

-

-

High-speed counter (200KHz) *3

6 points (3 channel) *3

4 points (2 channel)

High-speed counter (10KHz)

10 points (5 channel)

12 points (6 channel)

High-speed Pulse output

8 points(4 axes)

4 points(2 axes)

High-speed timer 0.1mS

1 (16-bit) , 4 (32-bit)

Built-in RTC

sec,min,hour,day,month,year,week

Data retentive

Program and Data

Non-volatile memory (no battery required)

Calendar

Battery

Specifications for advanced and compact PLC models.

Specification

MA1I4

MA1N3

MA1N0

MQ2M6

MQ2M3

MQ2M1

MQ2M0

Programming language

LD / ST / FB / STP / MotionFlow

Instruction execution

speed

LD Instruction

0.0008 uS/ LD (0.8nS/LD)

MOV Instruction

0.0075 uS/ LD (7.5nS / MOV)

Maximum I/O

DIO

2048

1024

1024

512

512

512

512

AIO

256

128

128

128

128

128

128

Maximum Expansion Modules

Local I/O + High-speed

64 units (with the use of I/O Bus Extension module)

High-speed Expansion

6 units

(need to be installed between CPU and Local I/O module)

-

-

-

-

Advanced Expansion

●

●

●

-

-

-

-

Plug-in Expansion

-

-

-

2 Sets

Program Memory

PLC

80KB

80KB

80KB

80KB

80KB

80KB

80KB

Motion

-

-

-

-

-

-

-

Memory card*5

Dedicated Industrial Grade Micro-SD Card

Project Backup and Restore

Support project and OS update with memory card

Register Data Backup and Restore

●

●

●

●

●

●

●

Specification

MA1I4

MA1N3

MA1N0

MQ2M6

MQ2M3

MQ2M1

MQ2M0

Built-in digital input and output

Input 16 points 、 Output 16 points

Built-in analog input

-

-

-

-

-

-

-

Built-in analog output

Optional selection (PWMDA x1 only in Y0)

Communication Interface

ETHERNET

Interface

1 Port 10/100 Base-T

Modbus / User-Defined

Master/Slave

Connections

16

EtherCAT

1 Port

(Eth/EC port shared with Ethernet*1)

-

1 Port

(Eth/EC port shared with Ethernet)

-

-

-

RS-485

2 ports ,Support Master/Slave ,Communication speed 4.8K~921.6Kbps

Maximum serial ports

14 (2 Built-in + 12 Expansion)

4 (2 Built-in + 2 Plug-in)

USB

1 port ,USB Type C (USB 2.0)

IoT expansion*4

MQTT , FATEK iMonitor / iAccess

Motion Control

Number of control axes

24 axes

12 axes

–

20 axes

4 axes

2 axes

-

Pulse

Axes

8 axes

4 axes

–

4 axes

Can expand up to 8 axes

4 axes

Can expand up to 8 axes

2 axes

Can expand up to 6 axes

-

Output frequency

200KHz

200KHz

–

200KHz

200KHz

200KHz

–

Pulse output mode

3 Modes (U/D、P/R、A/B)

Linear Interpolation

●

●

–

●

●

●

–

Circular Interpolation

●

–

–

●

–

–

–

ICF/ICA*2

●

●

–

●

●

●

–

EtherCAT

Number of axes (A+B+C)

16

8

–

16

–

–

–

Real/Virtual axes(A)

–

–

–

–

–

–

–

Additional Virtual axes(B)

–

–

–

–

–

–

–

Additional SAPC*1

axes on Eth/EC port(C)

16*6

8*6

–

16

–

–

–

Linear Interpolation

-

-

-

-

-

-

-

Circular Interpolation

-

-

-

-

-

-

-

ICF/ICA*2

-

-

-

-

-

-

-

3D Circular/Helical Interpolation

-

-

-

-

-

-

-

E-cam(Fly-saw/Rotary-cut)

-

-

-

-

-

-

-

High-speed counter (200KHz) *3

8 points (4 channels)

-

8 points (4 channels)

Can expand up to 8 channels

4 points

(2 channel)

Can expand up to 6 channel

-

High-speed Pulse output

16 points

(8 axes)

8 points

(4 axes)

-

8 points (4 axes)

Can expand up to 8 axes

4 points

(2 axes)

Can expand up to 6 axes

-

High-speed timer 0.1mS

1 (16-bit) , 4 (32-bit)

Built-in RTC

sec,min,hour,day,month,year,week

-

(Can Expandable through by MB-RTC)

Data retentive

Program and Data

Non-volatile memory (no battery required)

Calendar

Battery

◇:T — Transistor SINK(NPN) output;

J — Transistor SOURCE (PNP) output

*1 : SAPC (single axis positioning control) . Eth/EC ports on MA/MQ some models can be switched to support Ethernet/EtherCAT.

*2 : ICF (interrupt constant feed) , ICA(interrupt constant angle)

*3 : ME/MS/MU models, half of the available channels are reserved for Motion control

*4 : CPU built-in support for MQTT and iMonitor functions, while iAccess will be supported through advanced expansion (planned support in 2025). iMonitor and iAccess services must be activated using a license key

*5 : Only supports the MFM06 dedicated SD memory card (planned for support in 2026)

*6 : Expected future support

*7 : MU3C2 consolidates the majority of functions from MS2C3 / MS1C2 / MS1C1

6-3 CPU advanced specifications

Specification

ME3C6

ME2C5

ME2C4

ME2C3

MS3C6

MS2C5

MS2C4

HSPWM

Points

8 axis

Output frequency

72Hz~18.432KHz (Resolution is 0.1﹪) /720Hz~184.3KHz(Resolution is 1﹪)

Interrupt control

External input interrupt

32 (Positive/negative edge of 16-point input) *4

Internal timed interrupt

0.1 ms : 4 groups / 1 ms: 4 groups / 10 ms: 4 groups

High-speed Counter interrupt*3

8 groups*3

Capture input

Points

Max 8 Point

Capture pulse width

>10μs(high speed input)

Digital filtering (Digital Filter)

X0~X7 (frequency : 28KHz~1.8MH,Time constant : 3~15ms )

Input contact

(DI)

X

1024

1024

512

512

1024

1024

512

Output relay (DO)

Y

1024

1024

512

512

1024

1024

512

Temporary relay

TR

32

Internal relay

M

25600

Stepper relay

S

3104

Timer Status Contact

T

1024

Counter status contact

C

16 bit : 1024, 32 bit : 256

Timer

TMR

1024

Counter

CTR

16 bit : 1024, 32 bit : 256

Data register

R

R:34768 , D:8000

ROR

4096

F

65536

Input/

Output register

AI+AO

256

256

128

128

256

256

128

System special register

SR

7944(all)

Pointer register

XR

12(V,Z,P0~P9(10))

*3 : ME/MS/MU models, half of the available channels are reserved for Motion control

*4 : 16 of the ME/MS/MU models are used for Motion control

Specification

MU3C6

MU3C5

MU3C4

MU3C3

MU3C2*7

MU2C6

MU2C4

HSPWM

Points

4 axis

2 axis

Output frequency

72Hz~18.432KHz (Resolution is 0.1﹪) /720Hz~184.3KHz(Resolution is 1﹪)

Interrupt control

External input interrupt

32 (Positive/negative edge of 16-point input) *4

Internal timed interrupt

0.1 ms : 4 groups / 1 ms: 4 groups / 10 ms: 4 groups

High-speed Counter interrupt*3

3 groups

2 groups*3

Capture input

Points

Max 8 Point

Capture pulse width

>10μs(high speed input)

Digital filtering (Digital Filter)

X0~X7 (frequency : 28KHz~1.8MH,Time constant : 3~15ms )

Input contact

(DI)

X

256

256

256

256

256

256

256

Output relay (DO)

Y

256

256

256

256

256

256

256

Temporary relay

TR

32

Internal relay

M

25600

Stepper relay

S

3104

Timer Status Contact

T

1024

Counter status contact

C

16 bit : 1024, 32 bit : 256

Timer

TMR

1024

Counter

CTR

16 bit : 1024, 32 bit : 256

Data register

R

R:34768 , D:8000

ROR

4096

F

65536

Input/

Output register

AI+AO

256

256

128

128

256

256

128

System special register

SR

7944(all)

Pointer register

XR

12(V,Z,P0~P9(10))

Specification

MA1I4

MA1N3

MA1N0

MQ2M6

MQ2M3

MQ2M1

MQ2M0

HSPWM

Points

8 axis

4 axis

0 axis

4 axes

(Can expand up to 8 axes)

2 axes

(Can expand up to 6 axes)

0 axis

Output frequency

72Hz~18.432KHz (Resolution is 0.1﹪) /720Hz~184.3KHz(Resolution is 1﹪)

Interrupt control

External input interrupt

32 (Positive/negative edge of 16-point input) *4

Internal timed interrupt

0.1 ms : 4 groups / 1 ms: 4 groups / 10 ms: 4 groups

High-speed Counter interrupt*3

4 groups

0 groups

4 groups

(Can expand up to 8 groups)

2 groups

(Can expand up to 6 groups)

0 groups

Capture input

Points

Max 8 Point

Capture pulse width

>10μs(high speed input)

Digital filtering (Digital Filter)

X0~X15 (frequency : 28KHz~1.8MH,Time constant : 3~15ms )

Input contact

(DI)

X

1024

512

512

256

256

256

256

Output relay (DO)

Y

1024

512

512

256

256

256

256

Temporary relay

TR

32

Internal relay

M

25600

Stepper relay

S

3104

Timer Status Contact

T

1024

Counter status contact

C

16 bit:1024, 32 bit:256

Timer

TMR

1024

Counter

CTR

16 bit:1024, 32 bit:256

Data register

R

R:34768, D:8000

ROR

4096

F

65536

Input/

Output register

AI+AO

256

128

128

128

128

128

128

System special register

SR

7944(all)

Pointer register

XR

12(V,Z,P0~P9(10))

6-4 Digital Input (DI) Circuit

Item

Specifications

Input Points

16 points (8 points/1 common point)

Input Type

24VDC Single-end input

Maximum input frequency

200KHz

Input Signal Voltage

24VDC±10%

Threshold

ON Current

>4mA

OFF Current

<2mA

Maximum Input Current

6mA(DC24V)

Input indication

Displayed by LED: light when “ON”, dark when “OFF”

Isolation Type

optical isolation,500VAC,1 minute

SINK /SOURCE Wiring

Via variation of internal common terminal S/S and external common wiring

Noise Filtering Time

DHF(0 ~ 15ms)+AHF(0.47μs)

DHF:Digital Hardware Filter, AHF:Analog Hardware Filter

External connection

36 pin Push-in terminal blocks

DI specification of CPU module

6-4-1 24VDC Single-End Input Circuit and Wiring for SINK/SOURCE Input

The 24VDC single-end digital input circuits of M Series PLC are available for high, medium and low speed. They all have the similar circuit structures but with different response speeds. To save input terminals, the circuit of single-end input is implemented by connecting one end of all input points (photo coupler) inside the PLC to the same internal common point labeled as S/S. The other end of each input circuit is connected to corresponding terminals such as X0, X1, X2, etc. The S/S common terminal and N single-end inputs comprise of N digital inputs (i.e., only N+1 terminals are used for N terminals). Therefore, we call this type of input structure the single-end input. The user also needs to do the same thing when making the connection of external digital input devices. Namely, the one end of all input devices (e.g., buttons, switches) are connected together and called the external common wire, while the other ends of input circuits are connected to the input terminals X0, X1, X2, etc., of PLC. Then finish it by connecting the external common wiring and internal common terminal S/S to the positive/negative terminals of the 24VDC power. When connect the internal common terminal S/S to 24V+(positive) and the external common wire to 24V- (negative), then the circuit serve as SINK input. On the contrary, while exchange the wiring of the above internal and external common will serve as a SOURCE input. The above wiring schemes can illustrate below:

Wiring of single-end common SINK input

Wiring of single-end common SOURCE input

6-5 Digital Output (DO) Circuit

The digital output of MPLC is a transistor. However, due to the polarity relationship of the transistor, after single-ended common output is adopted, the polarities of SINK and SOURCE are opposite (the output common point COM of SINK must be connected to the negative terminal of the DC power supply, and the output common point COM of SRCE must be connected to the negative terminal of the DC power supply. to the positive end of the DC power supply), so the MPLC transistor output model is divided into two types: SINK output or SRCE output.

Warning

1. The output of M series PLC has no over-current protection. In the application of output circuit with safety consideration, users need to install over-current or short-circuit protection devices, such as fuses, in the external circuit.

2. In applications where it is dangerous to start at the same time of forward and reverse rotation, in addition to the interlock in the PLC internal program, an interlock circuit needs to be installed outside the PLC, as shown in the example below:

Interlock circuit wiring diagram

Avertissement

1. La sortie de l’automate de la série M n’a pas de protection contre les surintensités. Dans l’application du circuit de sortie avec des considérations de sécurité, les utilisateurs doivent installer des dispositifs de protection contre les surintensités ou les courts-circuits, tels que des fusibles, dans le circuit externe.

2. Dans les applications où il est dangereux de démarrer en même temps la rotation avant et la rotation arrière, en plus du verrouillage dans le programme interne de l’automate, un circuit de verrouillage doit être installé à l’extérieur de l’automate, comme le montre l’exemple ci-dessous :

Schéma de câblage du circuit de verrouillage

6-5-1 Digital Output Circuit Specifications

Item

Specifications

Output Points

16

Output Mode

Single-End Transistor Output;

T model: SINK(NPN), J model: SOURCE(PNP)

Maximum output frequency

200kHz

Working Voltage

5~30VDC

Maximum Load Current Resistive

0.1A

Maximum Voltage Drop

0.6V

Leakage Current

<0.1mA/30VDC

Maximum Output Delay Time

ON → OFF

2μS

OFF → ON

2μS

Isolation method

Optical Isolation, 500VAC, 1 minute

output status indication

Displayed by LED : Light when "ON", Dark when "OFF"

SINK/SOURCE output type

Choose SINK/SOURCE by models and non-exchangeable

External connection

36 pin Push-in terminal blocks

DO specification of CPU module

6-5-2 Structure and Wiring of Single-End Transistor SINK and SOURCE Output Circuit

Transistor Single-End SINK Output

Transistor Single-End SOURCE Output

The above figure also takes the output blocks with 2-current and 4-current structures as an example, respectively explaining the difference in the structure of the SINK output and SOURCE output circuits and their wiring methods (the structure and wiring of the 8-common output block are also the same, only the points numbers are different). The SINK output and SOURCE output of MPLC Transistor Single-End concurrent are different models. Users must pay attention to the SINK output model or the SOURCE output model when ordering.

6-5-3 Protection of Transistor Output and Noise Suppression

The transistor output in M Series PLC already includes Zener diode for counter-electromotive force, which is sufficient for low power inductive load and medium frequency of ON/OFF application. In conditions of high power or frequent ON/OFF, please construct another suppression circuit to lower noise interference and prevent voltage from exceeding the limit or overheating that may damage the transistor output circuit.

Suppress by a diode (for low power)

Suppress by a diode + Zener (high power and frequent ON/OFF)

6-6 Analog input specifications

Item

Specification

Input points

2 channels

Analog input characteristics and resolution

Voltage

Analog input range

Value

Resolution

0~10V

0~4096

2.44mV

Current

Analog input range

Value

Resolution

0~20mA

0~4096

4.88uA​

Conversion percision

Voltage

±1% (25°C±5 °C )

Current

±1% (25° C±5°C)

Conversion speed

Conversion once for each scan

Input resistance

Voltage : 76KΩ Current : 165Ω

Hardware maximum input

Voltage: 0 ~ 15V Current: 0 ~ 30mA

External connection

2X3 pins push-in terminal blocks

6-7 Dimensions of CPU Module

The front dimension of CPU module(MS,ME)

The front dimension of CPU module(MA)

The front dimension of CPU module(MQ)

The front dimension of CPU module(MU)

The side dimension of CPU module(MA,MS,ME)

The side dimension of CPU module(MQ,MU)

The side dimension of CPU module(MQ, MA, MS, ME,MU)

※The module dimension of Compact, Advanced,and General/ Advanced motion contral types are exactly same.

Was this page helpful?

Tip: press ← → to switch chapters, Ctrl+K to search