Precautions on Using the Product
|
Compliance with the application-related conditions |
|
The user shall evaluate the suitability of FATEK product and shall install the product in the well-designed equipment or system. The user needs to check if the system, machinery or device currently used is compatible with the FATEK product. If the user fails to confirm the compatibility or the suitability, then FATEK shall not be liable for the suitability of the product. When required by the customer, FATEK shall provide correlated third party certification to define the value rating and the application restrictions that will be applicable for the product. However, the aforesaid certification message shall not be considered as sufficient to determine the suitability of the FATEK product, the final product, the machine, the system and other applications or relevant combinations. Described below are certain applications that should be cautiously treated by the user. In spite of this, the content described below shall neither be considered as having included all of the intended product purposes nor suggesting that all of the following purposes shall be entirely suitable for the product. For example, outdoors use, use in an area subjected to potential chemical contamination or electrical interference or used under conditions or functions not mentioned in this Manual or used with the system, machine and equipment that may create risks to life or properties. Before working with the product, the user will be required to check if the entire system is marked with a hazard sign and shall select the design that can ensure the safety such as the backup design, etc. Otherwise, the user shall not be allowed to use the product in the application that will present personnel and the property safety concerns. In no event shall FATEK be liable for the specifications, statutory regulations or restrictions that will be used by the customer in the product combination or the product operations. When using the product, FATEK shall not be liable for the programs edited by the user or the resulting consequences. |
Disclaimers
|
Dimensions and weight |
|
The dimensions and the weight specified in the manual are nominal values only. Even if provided with the tolerance, they cannot be used in the manufacturing purposes. |
|
Performance data |
|
The data specified in this Manual mean that the performance data obtained under FATEKf provided with the tolerance, they cannot be used in the manufacturing purposes. afety such as the backup design, etc. Otherwise, the user shall not be allowed to use the actual performance shall be defined according to the content of the guarantee and the limit of responsibilities established by FATEK. |
|
Errors and negligence |
|
The content of this Manual is provided through careful checking process and is considered as correct. However, FATEK shall not be liable for the errors or the negligence that may be found in the text, printing content and proofreading. |
|
Change of specifications |
|
The product specifications and accessories may be subject to change along with the technical improvement or other reasons. In the event that the published specifications or performance need to be changed or where significant structural change is required, FATEK will change the model number of the product accordingly. If certain specifications of the product have changed, then FATEK will not give the notice under the following situation: when it is required to use a special model number or create particular specifications in order to support the customer’s application according to the instructions given by the customer. To confirm actual specifications of the product to be purchased, please contact the local FATEK distributor. |
|
Precaution |
|
Please be sure to use certified power supply with SELV output or certified power supply providing double insulation evaluated by UL60950-1, UL62368-1, or UL61010-1 and UL61010-2-201 standards. |
Tip: press ← → to switch chapters, Ctrl+K to search