The following table will detailed description the HMI and PLC or other devices occurred error when communicating, each meaning of the code:
Table 320 description of the communication error code
|
Error Code |
Description |
|
0x00000001 |
Com Port Not Open |
|
0x00001001 |
Dcc Illegal Parameters |
|
0x00001002 |
Dcc Stop |
|
0x00001003 |
Dcc Failed Set Read Back |
|
0x00001004 |
Dcc Failed |
|
0x00002000 |
DccErr Link Init |
|
0x00002001 |
Dcc Link Pending |
|
0x00002002 |
Dcc Screen Change |
|
0x00003001 |
Multilink Timeout |
|
0x00003002 |
Multilink Master and Slave use different PLC driver |
|
0x10010001 |
ComPort Error |
|
0x10010002 |
ComPort Open Fail |
|
0x10010003 |
ComPort Send Fail |
|
0x10010004 |
ComPort Receive Fail |
|
0x10020001 |
Socket Null |
|
0x10020002 |
Socket Connect Fail |
|
0x10020003 |
Socket Invalid IP |
|
0x10020004 |
Socket Send Fail |
|
0x10020005 |
Socket Receive Fail |
|
0x1002FFFF |
Socket Unknown |
|
0x20010001 |
Protocol Invalid Head |
|
0x20010002 |
Protocol Invalid End |
|
0x20010003 |
Protocol Invalid Length |
|
0x20010004 |
Protocol Invalid Data |
|
0x20010005 |
Protocol Invalid Error Check |
|
0x20010006 |
Protocol Invalid Parameter |
|
0x20010007 |
Protocol Invalid Password |
|
0x200A0000 |
Protocol Exception |
|
0x200Axxxx |
When the first 4 error codes are 200A, it means that the HMI get error from PLC, and the last 4 error codes are from PLC. Please refer to different brand PLC’s manual |
|
0x400A0000 |
Command Timeout |
|
0x400A0001 |
Command Send Failed |
|
0x400A0002 |
Command Receive Failed |
|
0x400B0001 |
Command Nack |
|
0x400B0002 |
Command Unknown |
|
0x400B0003 |
Command Not Support |
|
0x400C0001 |
API Parameter Error |
|
0x400CFFFF |
Internal Error |
Tip: press ← → to switch chapters, Ctrl+K to search